2.8

Adjusted Signal

2.8

Raw Pattern Score

100%

Time Factor

2026-10-31

Last Push

12.0K

Stars

Language

406.4K

Lines of Code

1.2K

Files

740

Pattern Hits

2026-10-31

Scan Date

0.06

HC Hit Rate

Risk Review · Payload v1

Use each vector to guide manual verification of the underlying findings.

Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.

Cognitive Ownership Risk 8.0/100 · LOW

Can maintainers explain intent, assumptions, and trade-offs? 658 finding(s).

Hallucinated Dependency & Supply Chain Risk 4.3/100 · LOW

Are imports declared and package/API names verified? 59 finding(s).

Agent Over-Engineering Ratio 1.8/100 · LOW

Are wrappers, guards, and repeated structures necessary? 74 finding(s).

PR Review Velocity Impact 12.9/100 · LOW

Which changes need focused human review? 740 finding(s).

What These Metrics Mean

Adjusted Signal: Legacy pattern score normalized per 1,000 scanned lines and multiplied by the repository-level time factor. It is not an estimate of AI authorship.
Raw Pattern Score: Sum of severity- and context-weighted pattern findings before applying the time factor.
Time Factor: A coarse multiplier based on repository last-push metadata. It does not identify when individual code was written.
Pattern Hits: Count of configured pattern findings. Review each location and surrounding code before acting.
HC Hit Rate: High- and critical-severity findings per scanned file. Severity is a configured detector weight, not proof of a vulnerability or authorship.
Lines / Files: Scan coverage denominators used by the legacy normalized score.

Pattern-Signal History

This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.

Severity Breakdown

Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.

CRITICAL 0HIGH 74MEDIUM 7LOW 659

Directory Score Breakdown

This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.

Pattern Findings

The scanner identified 740 distinct pattern matches across 12 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.

Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.

Over-Commented Block566 hits · 556 pts

Severity	File	Line	Snippet	Context
LOW	Tests/test_linux_requester_helper.py	21		COMMENT
LOW	Tests/windows_header_cleanup_test.c	101	static void TestCryptoClose (PCRYPTO_INFO cryptoInfo)	COMMENT
LOW	Tests/linux_process_test.cpp	1	// Exercise the production File and Process code using temporary regular files.	COMMENT
LOW	Tests/test_fuset_cleanup.py	21	#include "Platform/Platform.h"	COMMENT
LOW	Tests/volume_read_test.cpp	1	// Decrypt the data area of a volume through the volume layer, without	COMMENT
LOW	Tests/test_linux_privilege_helpers.py	41	#include <cstdlib>	COMMENT
LOW	Tests/encryption_thread_pool_exception_test.cpp	1	/* Copyright (c) 2026 AM Crypto. Licensed under the Apache License 2.0. */	COMMENT
LOW	Tests/encryption_thread_pool_lifecycle_test.cpp	1	/* Copyright (c) 2026 AM Crypto. Licensed under the Apache License 2.0. */	COMMENT
LOW	Tests/windows_kdf_completion_test.c	21	#define _beginthreadex TestBeginThread	COMMENT
LOW	src/Crypto/Aeskey.c	241		COMMENT
LOW	src/Crypto/SerpentFast.c	1	/*	COMMENT
LOW	src/Crypto/SerpentFast.c	21	#define BOTAN_ENDIAN_B2N(x) (x)	COMMENT
LOW	src/Crypto/Sha2.c	1	/*	COMMENT
LOW	src/Crypto/Sha2.c	21		COMMENT
LOW	src/Crypto/Sha2.c	381		COMMENT
LOW	src/Crypto/Sha2.c	401	#define Wt_15(i) Wt((i)-15)	COMMENT
LOW	src/Crypto/Sha2.c	681	#endif	COMMENT
LOW	src/Crypto/Camellia.c	61	void camellia_ecb_enc_16way(const uint8 ctx, uint8 dst, const uint8 *src);	COMMENT
LOW	src/Crypto/chacha-xmm.c	41	#pragma warning(default:4799)	COMMENT
LOW	src/Crypto/AesSmall.c	41	/* define if you have a fast memcpy function on your system */	COMMENT
LOW	src/Crypto/AesSmall.c	61		COMMENT
LOW	src/Crypto/sm4-impl-aesni.cpp	101		COMMENT
LOW	src/Crypto/Aestab.h	81	# endif	COMMENT
LOW	src/Crypto/Aestab.h	101	# define XP_DIR __cdecl	COMMENT
LOW	src/Crypto/Aestab.h	121	#endif	COMMENT
LOW	src/Crypto/Aestab.h	141	d_4(uint_32t, t_dec(i,n), isb_data, v0, v1, v2, v3);	COMMENT
LOW	src/Crypto/Aestab.h	161	#undef LS4_SET	COMMENT
LOW	src/Crypto/Twofish.c	41	#include "Common/Endian.h"	COMMENT
LOW	src/Crypto/Twofish.c	761	f01 = q(0,i); f5b = ffm_5b(f01); fef = ffm_ef(f01);	COMMENT
LOW	src/Crypto/Twofish.c	781	#define q_1(x) q(0,x)	COMMENT
LOW	src/Crypto/Twofish.c	841	#endif	COMMENT
LOW	src/Crypto/cpu.c	1	/* cpu.c - written and placed in the public domain by Wei Dai */	COMMENT
LOW	src/Crypto/cpu.c	481		COMMENT
LOW	src/Crypto/Aescrypt.c	41	#else	COMMENT
LOW	src/Crypto/Aescrypt.c	81	#define fwd_rnd(y,x,k,c) (s(y,c) = (k)[c] ^ four_tables(x,t_use(f,n),fwd_var,rf1,c))	COMMENT
LOW	src/Crypto/Aescrypt.c	201	#if defined(IT4_SET)	COMMENT
LOW	src/Crypto/config.h	1	#ifndef CRYPTOPP_CONFIG_H	COMMENT
LOW	src/Crypto/config.h	21		COMMENT
LOW	src/Crypto/config.h	41	#endif	COMMENT
LOW	src/Crypto/config.h	61	#elif defined(__GNUC__)	COMMENT
LOW	src/Crypto/config.h	81	#else	COMMENT
LOW	src/Crypto/config.h	101	#else	COMMENT
LOW	src/Crypto/config.h	121	#endif	COMMENT
LOW	src/Crypto/config.h	141	#define CRYPTOPP_BOOL_SSSE3_INTRINSICS_AVAILABLE 0	COMMENT
LOW	src/Crypto/config.h	161		COMMENT
LOW	src/Crypto/config.h	181	// Detect via __ILP32__ (http://wiki.debian.org/X32Port). However, __ILP32__ shows up in more places than	COMMENT
LOW	src/Crypto/config.h	201		COMMENT
LOW	src/Crypto/config.h	221	// VC_UNALIGNED_ACCESS_OK is 1 on targets where unaligned 32- and 64-bit loads	COMMENT
LOW	src/Crypto/config.h	241	# define CRYPTOPP_ARM_ASIMD_AVAILABLE 1	COMMENT
LOW	src/Crypto/config.h	261	# if defined(__aarch32__) \|\| defined(__aarch64__) \|\| defined(_M_ARM64)	COMMENT
LOW	src/Crypto/config.h	281	// the LDRD/STRD/LDM instructions used for 64-bit words still fault (SIGBUS).	COMMENT
LOW	src/Crypto/misc.h	1	#ifndef CRYPTOPP_MISC_H	COMMENT
LOW	src/Crypto/misc.h	21	#if !defined(TC_WINDOWS_DRIVER) && !defined(_UEFI)	COMMENT
LOW	src/Crypto/misc.h	41	#define CRYPTOPP_FAST_ROTATE(x) ((x) == 32)	COMMENT
LOW	src/Crypto/misc.h	61	#else	COMMENT
LOW	src/Crypto/misc.h	81	#define rotr8(x,n) (((x) >> n) \| ((x) << (8 - n)))	COMMENT
LOW	src/Crypto/misc.h	101	#define bswap_64 OSSwapInt64	COMMENT
LOW	src/Crypto/misc.h	241	#define GetAlignmentOf(T) sizeof(T)	COMMENT
LOW	src/Crypto/Aesopt.h	101	#endif	COMMENT
LOW	src/Crypto/Aesopt.h	201	order (which later checks below ensure).	COMMENT
506 more matches not shown…

Cross-Language Confusion59 hits · 360 pts

Severity	File	Line	Snippet	Context
HIGH	Tests/test_macos_discovery.py	124	for(auto volume:volumes)Require(volume->Discovery==VolumeInfo::DiscoveryUnknown && volume->VirtualDevice.empty()	CODE
HIGH	Tests/test_macos_discovery.py	128	Require(Queries==4 && volumes.front()->VirtualDevice=="/dev/disk42", "destructive lookup reused display snapshot	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	59	struct stat st, null;	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	60	return fstat (fd, &st) == 0 && stat ("/dev/null", &null) == 0 && S_ISCHR (st.st_mode) && st.st_rdev == null.st_rdev;	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	60	return fstat (fd, &st) == 0 && stat ("/dev/null", &null) == 0 && S_ISCHR (st.st_mode) && st.st_rdev == null.st_rdev;	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	68	if (geteuid() != 0 && (!FreshHelper \|\| ParentOnlyMarker != 0	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	71	\|\| fcntl (InheritedFd, F_GETFD) != -1 \|\| errno != EBADF))	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	104	if (setgroups (1, &groupId) != 0 \|\| setgid (groupId) != 0 \|\| setuid (userId) != 0	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	107	\|\| listen (listening, 1) != 0 \|\| write (ready[1], "r", 1) != 1)	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	111	_exit (connection != -1 && recv (connection, &data, sizeof (data), 0) == 0 ? 0 : 1);	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	189	&& reply.Stage == RequesterHelperSucceeded && unused == -1, "fresh timestamp helper");	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	191	Require (stat (argv[3], &st) == 0 && st.st_atime == timesRequest.Times[0].tv_sec	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	199	&& reply.Stage == RequesterHelperStartup && unused == -1,	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	201	Require (stat (argv[3], &st) == 0 && st.st_atime == 1500000000 && st.st_mtime == 1500000100,	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	205	&& reply.Stage == RequesterHelperStartup && unused == -1,	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	209	&& reply.Stage == RequesterHelperStartup && unused == -1, "exec errno lost");	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	244	Require (RunRequesterHelperProcess (request, reply, unused) != 0 && unused == -1,	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	246	Require (fstat (descriptor, &st) == 0 && st.st_size != 0, "invalid request truncated file");	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	250	Require (RunRequesterHelperProcess (noPath, reply, unused) != 0 && unused == -1,	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	253	Require (RunRequesterHelperProcess (request, reply, unused) != 0 && unused == -1,	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	257	Require (RunRequesterHelperProcess (request, reply, unused) != 0 && unused == -1,	CODE
HIGH⚡	Tests/test_linux_requester_helper.py	267	Require (waitpid (-1, nullptr, WNOHANG) == -1 && errno == ECHILD, "unreaped helper");	CODE
HIGH	Tests/test_linux_requester_helper.py	127	Require (service != -1 && waitpid (service, &serviceStatus, 0) == service, "run helper service");	CODE
HIGH	Tests/test_linux_requester_helper.py	142	if (argc == 3 && strcmp (argv[1], TC_REQUESTER_HELPER_CMDLINE_OPTION) == 0)	CODE
HIGH	Tests/test_linux_requester_helper.py	149	Require (argc == 4 && geteuid() == 0, "expected root: UID GID FILE");	CODE
HIGH	Tests/test_linux_requester_helper.py	175	&& reply.Stage == RequesterHelperSucceeded && descriptor != -1, "fresh open helper");	CODE
HIGH	Tests/test_linux_requester_helper.py	229	&& reply.Stage == RequesterHelperStartup && unused == -1, "early exit was not a startup failure");	CODE
HIGH⚡	Tests/test_fuset_cleanup.py	87	Require(worker.StartupAborted && Mounted && Finished==0,"busy rollback stopped FUSE");	CODE
HIGH⚡	Tests/test_fuset_cleanup.py	88	Require(Replies==1 && Reply==(command==VC_FUSE_SHUTDOWN_PROBE?0:EBUSY),"busy rollback starved endpoint");	CODE
HIGH⚡	Tests/test_fuset_cleanup.py	92	Require(worker.Unmounted && !Mounted && Finished==1,"rollback did not resume after busy cleared");	CODE
HIGH	Tests/test_fuset_cleanup.py	249	if(!Mounted \|\| FailPreflight)throw MountServiceUnavailable("mock preflight");	STRING
HIGH	Tests/test_fuset_cleanup.py	262	++Waits; if(pid!=1234 \|\| startTime!=987654321)throw std::runtime_error("wrong service identity");	STRING
HIGH	Tests/test_fuset_cleanup.py	288	Require(Discoveries==0 && Requests==0, "operation after failed preflight");	STRING
HIGH	Tests/test_fuset_cleanup.py	298	Require(!Mounted && Requests==1 && Waits==1, "service exit was not awaited after SMB removal");	STRING
HIGH	Tests/test_fuset_cleanup.py	310	Require(CapturedReads==1 && !Mounted && Commands==0, "hidden-protection refresh did not use captured volume");	STRING
HIGH	Tests/test_backup_header_retry.py	101	bool cached = State.Cache && (!options.Password \|\| options.Password->IsEmpty())	CODE
HIGH	Tests/test_backup_header_retry.py	102	&& (!options.Keyfiles \|\| options.Keyfiles->empty());	CODE
HIGH⚡	Tests/test_backup_header_retry.py	183	Require (failure == BackendFailure && string (e.what()) == "backup"	CODE
HIGH⚡	Tests/test_backup_header_retry.py	184	&& e.GetCommand() == "mount" && e.GetExitCode() == 37 && e.GetErrorOutput() == "backend details",	CODE
HIGH⚡	Tests/test_backup_header_retry.py	187	Require (failure == IoFailure && e.GetErrorCode() == EIO && string (e.what()) == "backup",	CODE
HIGH⚡	Tests/test_backup_header_retry.py	190	Require (failure == Cancelled && string (e.what()) == "backup" && e.GetSubject() == L"cancelled mount",	CODE
HIGH⚡	Tests/test_backup_header_retry.py	193	Require (failure == StandardFailure && string (e.what()) == "backup", "standard exception changed");	CODE
HIGH⚡	Tests/test_backup_header_retry.py	195	Require (failure == UnknownFailure && e.Code == 42, "unknown exception changed");	CODE
HIGH⚡	Tests/test_backup_header_retry.py	211	Require (options.Password == State.Calls.back().Password && options.Pim == State.Calls.back().Pim,	CODE
HIGH⚡	Tests/test_backup_header_retry.py	214	Require (State.OuterPrompts == 3 && State.BackupWarnings.empty(), "failure prompted again or warned of success")	CODE
HIGH⚡	Tests/test_backup_header_retry.py	221	Require (!options.UseBackupHeaders && State.BackupWarnings.empty(), "failed fallback reported as successful");	CODE
HIGH⚡	Tests/test_backup_header_retry.py	222	Require (State.OuterPrompts == 4 && State.Messages == vector<string> ({"primary", "primary", "primary"}),	CODE
HIGH	Tests/test_backup_header_retry.py	237	&& State.Calls[3].Pim == State.Calls[4].Pim && State.Calls[3].Keyfiles == State.Calls[4].Keyfiles,	CODE
HIGH	Tests/test_backup_header_retry.py	241	Require (State.OuterPrompts == 3 && options.UseBackupHeaders, "accepted backup selection lost");	CODE
HIGH	Tests/test_backup_header_retry.py	252	Require (options.UseBackupHeaders && State.BackupWarnings.empty(), "explicit backup option changed");	CODE
HIGH	Tests/test_backup_header_retry.py	265	Require (State.OuterPrompts == 0 && State.BackupWarnings.empty(), "cache recovery asked for outer password");	CODE
HIGH	Tests/test_fuset_aux_directory.py	67	if(result==0 && IgnoreOwnership)info->f_flags \|= MNT_IGNORE_OWNERSHIP;	CODE
HIGH	Tests/test_fuset_aux_directory.py	96	if(rename(path.c_str(), (path+".original").c_str())!=0 \|\| mkdir(path.c_str(), 0700)!=0)	CODE
HIGH	Tests/test_linux_privilege_helpers.py	155	Require(option == 39 && a == 0 && b == 0 && c == 0 && d == 0,	CODE
HIGH	Tests/test_linux_privilege_helpers.py	176	Require(errno == ENOENT && error.find("not found in system directories") != std::string::npos,	CODE
HIGH⚡	Tests/test_linux_privilege_helpers.py	213	if (argc == 3 && std::string(argv[1]) == "--resolve") {	CODE
HIGH⚡	Tests/test_linux_privilege_helpers.py	219	if (argc == 3 && std::string(argv[1]) == "--trusted") {	CODE
HIGH⚡	Tests/test_linux_privilege_helpers.py	228	if (argc == 2 && std::string(argv[1]) == "--kernel") {	CODE
HIGH	Tests/test_linux_service_inheritance.py	43	while (waitpid(child, &status, 0) == -1 && errno == EINTR) { }	CODE

Empty Error Handlers15 hits · 75 pts

Severity	File	Line	Snippet	Context
HIGH	Tests/test_macos_gui_lifecycle.py	85	except ProcessLookupError:	CODE
HIGH	Tests/test_linux_loop_identity.py	101	except OSError:	CODE
HIGH	Tests/test_stdin_password.py	73	except ProcessLookupError:	CODE
HIGH	Tests/test_fuset_aux_directory.py	238	except PermissionError:	CODE
HIGH	Tests/test_fuset_aux_directory.py	243	except PermissionError:	CODE
HIGH	Tests/test_fuset_aux_directory.py	248	except PermissionError:	CODE
HIGH	Tests/test_fuset_dismount.py	176	except ProcessLookupError:	CODE
HIGH	Tests/test_linux_process.py	53	except ProcessLookupError:	CODE
HIGH	Tests/test_linux_requester_access.py	199	except PermissionError:	CODE
HIGH	Tests/test_linux_requester_access.py	367	except OSError:	CODE
HIGH	Tests/test_linux_requester_access.py	168	except (OSError, IndexError):	CODE
HIGH	Tests/test_linux_requester_access.py	274	except OSError:	CODE
HIGH	Tests/test_linux_requester_access.py	400	except (OSError, KeyError):	CODE
HIGH	Tests/test_linux_requester_access.py	272	except OSError:	CODE
HIGH	src/Build/test_veracrypt_openwrt_qemu.py	298	except tarfile.TarError:	CODE

Hyper-Verbose Identifiers51 hits · 58 pts

Severity	File	Line	Snippet	Context
LOW	Tests/test_xmlvalidate.py	60	def test_complete_translations_and_english_fallbacks_pass(self):	CODE
LOW	Tests/test_xmlvalidate.py	71	def test_reports_every_missing_key_and_continues_to_later_files(self):	CODE
LOW	Tests/test_xmlvalidate.py	87	def test_malformed_xml_reports_parser_error_and_continues(self):	CODE
LOW	Tests/test_xmlvalidate.py	103	def test_invalid_escape_reports_error_and_continues(self):	CODE
LOW	Tests/test_stdin_password.py	55	def check_overflow_without_eof(vc, checks, work, env):	CODE
LOW	Tests/test_linux_read_only_integration.py	168	def check_read_only_block_device(checks, path, layers):	CODE
LOW⚡	Tests/test_translation_formats.py	22	def test_windows_narrow_and_wide_strings_are_distinct(self):	CODE
LOW⚡	Tests/test_translation_formats.py	27	def test_portable_printf_rejects_windows_only_modifiers(self):	CODE
LOW⚡	Tests/test_translation_formats.py	35	def test_printf_percent_escapes_and_numeric_fields(self):	CODE
LOW⚡	Tests/test_translation_formats.py	42	def test_windows_integer_widths_and_signedness(self):	CODE
LOW⚡	Tests/test_translation_formats.py	47	def test_invalid_and_writing_printf_conversions_are_rejected(self):	CODE
LOW⚡	Tests/test_translation_formats.py	52	def test_formatter_allows_reordering_repetition_and_escaped_braces(self):	CODE
LOW⚡	Tests/test_translation_formats.py	57	def test_formatter_does_not_accept_windows_modifiers(self):	CODE
LOW⚡	Tests/test_translation_formats.py	60	def test_formatter_rejects_malformed_and_out_of_grammar_fields(self):	CODE
LOW⚡	Tests/test_translation_formats.py	112	def test_english_fallback_and_localized_percent_position_pass(self):	CODE
LOW⚡	Tests/test_translation_formats.py	118	def test_korean_rescue_disk_invalid_conversion_is_rejected(self):	CODE
LOW⚡	Tests/test_translation_formats.py	121	def test_korean_target_identity_cannot_be_omitted(self):	CODE
LOW⚡	Tests/test_translation_formats.py	124	def test_hebrew_drive_annotation_cannot_be_omitted(self):	CODE
LOW⚡	Tests/test_translation_formats.py	128	def test_extra_overwrite_argument_and_integer_keyfile_are_rejected(self):	CODE
LOW⚡	Tests/test_translation_formats.py	132	def test_incorrect_windows_string_width_is_rejected(self):	CODE
LOW⚡	Tests/test_translation_formats.py	136	def test_wx_messages_reject_windows_only_string_modifiers(self):	CODE
LOW⚡	Tests/test_translation_formats.py	142	def test_windows_modifiers_and_portable_wx_modifiers_pass(self):	CODE
LOW⚡	Tests/test_translation_formats.py	150	def test_numeric_xml_entities_cannot_supply_placeholders(self):	CODE
LOW⚡	Tests/test_translation_formats.py	246	def test_escaped_numeric_entity_text_does_not_supply_placeholders(self):	CODE
LOW⚡	Tests/test_translation_formats.py	253	def test_both_basque_percent_escape_errors_are_rejected(self):	CODE
LOW⚡	Tests/test_translation_formats.py	257	def test_unreferenced_and_out_of_range_formatter_arguments_are_rejected(self):	CODE
LOW⚡	Tests/test_translation_formats.py	262	def test_messages_shown_without_formatting_cannot_gain_placeholders(self):	CODE
LOW⚡	Tests/test_translation_formats.py	266	def test_recorded_omissions_allow_only_the_recorded_argument_prefix(self):	CODE
LOW⚡	Tests/test_translation_formats.py	274	def test_missing_key_and_malformed_xml_fail(self):	CODE
LOW	Tests/test_translation_formats.py	166	def test_numeric_xml_entities_in_reference_are_rejected(self):	CODE
LOW	Tests/test_translation_formats.py	177	def test_custom_xml_entities_cannot_supply_placeholders(self):	CODE
LOW	Tests/test_translation_formats.py	197	def test_quote_entities_are_rejected_in_unformatted_entries(self):	CODE
LOW	Tests/test_translation_formats.py	208	def test_repeated_entity_escaping_is_rejected(self):	CODE
LOW	Tests/test_translation_formats.py	219	def test_quote_entities_in_reference_are_rejected(self):	CODE
LOW	Tests/test_translation_formats.py	230	def test_entity_check_only_inspects_entry_text(self):	CODE
LOW⚡	Tests/test_wxbuild_jobs.py	161	def test_recursive_build_shares_parent_slots(self):	STRING
LOW⚡	Tests/test_wxbuild_jobs.py	164	def test_openwrt_build_shares_parent_slots(self):	STRING
LOW⚡	Tests/test_wxbuild_jobs.py	167	def test_openwrt_empty_pkg_jobs_stays_serial(self):	STRING
LOW	src/SetupDLL/Setup.c	1827	* Same as Setup.c, function DoApplicationDataUninstall(), but	COMMENT
LOW	src/Build/test_veracrypt_openwrt_qemu.py	275	def extract_top_level_control_archive(ipk_path):	CODE
LOW⚡	src/Build/test_veracrypt_openwrt_qemu.py	441	def official_index_cache_path(work_dir, info, name):	CODE
LOW⚡	src/Build/test_veracrypt_openwrt_qemu.py	446	def kmod_dir_from_kernel_version(version):	CODE
LOW⚡	src/Build/test_veracrypt_openwrt_qemu.py	454	def official_manifest_kernel_version(args, info):	CODE
LOW	src/Build/test_veracrypt_openwrt_qemu.py	466	def discover_single_kmod_feed_url(info):	CODE
LOW	src/Build/test_veracrypt_openwrt_qemu.py	482	def resolve_official_kmod_feed_url(args, info):	CODE
LOW	src/Build/test_veracrypt_openwrt_qemu.py	495	def official_kmod_package_index(args):	CODE
LOW	src/Main/UserInterface.cpp	40	class AdminPasswordRequestHandler : public GetStringFunctor	CODE
LOW	src/Main/TextUserInterface.cpp	66	class AdminPasswordTextRequestHandler : public GetStringFunctor	CODE
LOW	src/Main/TextUserInterface.h	22	class AdminPasswordTextRequestHandler;	CODE
LOW	src/Main/TextUserInterface.h	26	friend class AdminPasswordTextRequestHandler;	CODE
LOW	src/Main/GraphicUserInterface.cpp	121	class AdminPasswordGUIRequestHandler : public GetStringFunctor	CODE

Redundant / Tautological Comments18 hits · 29 pts

Severity	File	Line	Snippet	Context
LOW	.github/workflows/xmlvalidate.sh	44	# Check if the common Language.xml exists	COMMENT
LOW	.github/workflows/xmlvalidate.sh	178	# Output the result for the current file	COMMENT
LOW	src/Setup/MacOSX/notarize.sh	48	# Check if VeraCrypt.app bundle exists	COMMENT
LOW⚡	src/Build/sign_rpm.sh	9	# Check if a directory was provided as an argument	COMMENT
LOW⚡	src/Build/sign_rpm.sh	16	# Check if the specified directory exists	COMMENT
LOW⚡	src/Build/sign_rpm.sh	22	# Check if there are any RPM files in the directory	COMMENT
LOW	src/Build/build_cmake_deb.sh	130	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_cmake_opensuse.sh	100	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_cmake_opensuse.sh	123	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_veracrypt_freebsd.sh	46	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_veracrypt_freebsd.sh	63	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_cmake_rpm.sh	100	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_cmake_rpm.sh	125	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_veracrypt_macosx.sh	153	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_veracrypt_linux.sh	51	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_veracrypt_linux.sh	68	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_veracrypt_linux_no_sse2.sh	51	# Check if wx-config exists in WX_BUILD_DIR	COMMENT
LOW	src/Build/build_veracrypt_linux_no_sse2.sh	67	# Check if wx-config exists in WX_BUILD_DIR	COMMENT

Deep Nesting15 hits · 15 pts

Severity	File	Line	Context
LOW	Tests/test_macos_gui_inactivity.py	19	CODE
LOW	Tests/test_stdin_password.py	55	CODE
LOW	Tests/test_linux_read_only_integration.py	227	CODE
LOW	Tests/test_fuset_aux_directory.py	26	CODE
LOW	Tests/test_fuset_dismount.py	212	CODE
LOW	Tests/test_fuset_dismount.py	285	CODE
LOW	Tests/test_fuset_dismount.py	324	CODE
LOW	Tests/test_linux_process.py	21	CODE
LOW	Tests/test_linux_requester_access.py	263	CODE
LOW	Tests/test_linux_requester_access.py	387	CODE
LOW	.github/workflows/validate_translation_formats.py	130	CODE
LOW	.github/workflows/validate_translation_formats.py	175	CODE
LOW	.github/workflows/validate_translation_formats.py	267	CODE
LOW	src/Build/test_veracrypt_openwrt_qemu.py	275	CODE
LOW	src/Build/test_veracrypt_openwrt_qemu.py	318	CODE

Self-Referential Comments3 hits · 9 pts

Severity	File	Line	Snippet	Context
MEDIUM	Tests/test_linux_loop_identity.py	363	# Creating the device-mapper device fails if one of the same name exists, here without a UUID, as created	COMMENT
MEDIUM	.github/workflows/xmlvalidate.sh	41	# Define the path to the common Language.xml	COMMENT
MEDIUM	.github/workflows/xmlvalidate.sh	75	# Define the regex for finding invalid escape sequences.	COMMENT

Decorative Section Separators3 hits · 9 pts

Severity	File	Line	Snippet	Context
MEDIUM	src/Build/veracrypt-launchpad-uploader.py	1	# =============================================================================	COMMENT
MEDIUM	src/Build/veracrypt-launchpad-uploader.py	3	# =============================================================================	COMMENT
MEDIUM	src/Build/veracrypt-launchpad-uploader.py	28	# =============================================================================	COMMENT

Excessive Try-Catch Wrapping5 hits · 6 pts

Severity	File	Line	Snippet	Context
LOW	Tests/test_linux_loop_identity.py	538	except Exception as e:	CODE
LOW	Tests/test_linux_fuse_fsync.py	279	except Exception as e:	CODE
LOW	Tests/test_linux_requester_access.py	207	except Exception as e:	CODE
MEDIUM	src/Build/test_veracrypt_openwrt_qemu.py	871	print(f"Error: {exc}", file=sys.stderr)	CODE
LOW	src/Build/veracrypt-launchpad-uploader.py	154	except Exception as e:	CODE

Slop Phrases3 hits · 4 pts

Severity	File	Line	Snippet	Context
LOW	src/Crypto/Argon2/src/opt_sse2.c	133	/* Don't forget to generate the first block of addresses: */	COMMENT
LOW	src/Crypto/Argon2/src/ref.c	128	/* Don't forget to generate the first block of addresses: */	COMMENT
LOW	src/Crypto/Argon2/src/opt_avx2.c	133	/* Don't forget to generate the first block of addresses: */	COMMENT

Overly Generic Function Names1 hit · 1 pts

Severity	File	Line	Snippet	Context
LOW	Tests/test_mount_helper.py	100	def helper(options=None, extra=()):	CODE

Verbosity Indicators1 hit · 1 pts

Severity	File	Line	Snippet	Context
LOW	doc/html/en/Random Number Generator.html	49	<p>The purpose of this function is to perform diffusion [2]. Diffusion spreads the influence of individual “raw&rd	CODE

veracrypt/VeraCrypt

Open-Source Code Quality, Security and Technical Debt Review