Pulumi - Infrastructure as Code in any programming language 🚀
This report summarizes scanner evidence for pulumi/pulumi, a Go project with 25,780 GitHub stars. SynthScan examined 2,249,446 lines of code across 39116 source files, recording 39599 pattern matches distributed across 23 syntactic categories. The legacy adjusted pattern signal is 29.2 (Elevated pattern signal); it is not an authorship estimate.
Use the findings to ask whether maintainers can explain intent, verify dependencies, simplify unnecessary scaffolding, and focus review effort. Risk Payload v1 adds ownership, supply-chain, over-engineering, and review-effort vectors when available. These are prompts for human verification, not probabilities, security findings, or measured maintenance costs.
Use each vector to guide manual verification of the underlying findings.
Can maintainers explain intent, assumptions, and trade-offs? 6146 finding(s).
Are imports declared and package/API names verified? 25116 finding(s).
Are wrappers, guards, and repeated structures necessary? 9548 finding(s).
Which changes need focused human review? 39599 finding(s).
This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.
Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.
This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.
The scanner identified 39599 distinct pattern matches across 23 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.
Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | …der-type-schema/python/pulumi_providerType/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …e-schema/python/pulumi_providerType/submod/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …ve-nested-types/python/pulumi_azure_native/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …rnal-resource-schema/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …codegen/different-enum/python/pulumi_plant/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …en/naming-collisions/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …gen/plain-and-default/python/pulumi_foobar/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …codegen/regress-py-14539/python/pulumi_gcp/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …esource-with-aliases/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …en/legacy-names/python/pulumi_legacy_names/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …n/simple-yaml-schema/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …/assets-and-archives/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …ict-setuppy/python/pulumi_typedDictExample/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …en/regress-8403/python/pulumi_mongodbatlas/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …ple-schema-pyproject/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …gen/regress-node-8110/python/pulumi_my8110/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …mple-resource-schema/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …n/regress-py-17219/python/pulumi_cloudinit/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …degen/embedded-crd-types/python/pulumi_foo/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …-plain-resource/python/pulumi_metaprovider/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …egen/urn-id-properties/python/pulumi_urnid/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …/regress-py-tfbridge-611/python/pulumi_aws/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …codegen/regress-py-14012/python/pulumi_foo/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …degen/regress-py-12980/python/pulumi_myPkg/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …rce-property-overlap/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …-funcs-edgeorder/python/pulumi_myedgeorder/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …degen/regress-py-12546/python/pulumi_plant/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …n/dashed-import-schema/python/pulumi_plant/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …single-value-returns/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …a/codegen/output-funcs/python/pulumi_mypkg/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …ppy/python/pulumi_typedDictDisabledExample/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …n-url/python/pulumi_registrygeoreplication/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …hon-same-module-name/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …imple-methods-schema/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …en/dash-named-schema/python/pulumi_foo_bar/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …codegen/cyclic-types/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …ta/codegen/nested-module/python/pulumi_foo/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …ma-with-root-package/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …gen/hyphenated-symbols/python/pulumi_repro/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …en/nested-module-thirdparty/python/foo_bar/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …om-pypackage-name/python/custom_py_package/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …resource-args-python/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …t-pyproject/python/pulumi_typedDictExample/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …hon-case-insensitive/python/pulumi_example/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …/toml/local/sdks/flaky-46.0.0/pulumi_flaky/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …e-ref-40.0.0/pulumi_optional_primitive_ref/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …ocal/sdks/primitive-7.0.0/pulumi_primitive/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …s/namespaced-16.0.0/a_namespace_namespaced/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …sdks/any-handled-42.0.0/pulumi_any_handled/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …ly-invoke-24.0.0/pulumi_output_only_invoke/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …l/local/sdks/ref-ref-12.0.0/pulumi_ref_ref/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …sdks/kebab-names-52.0.0/pulumi_kebab_names/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …/toml/local/sdks/union-18.0.0/pulumi_union/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …l/sdks/configurer-38.0.0/pulumi_configurer/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …a/toml/local/sdks/names-6.0.0/pulumi_names/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …lprimitive-34.0.0/pulumi_optionalprimitive/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | ….0.0/pulumi_discriminated_union_marked_key/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …pha.1.internal+exp.sha.2143768/pulumi_sync/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| HIGH | …l/sdks/extenumref-32.0.0/pulumi_extenumref/provider.py | 0 | the set of arguments for constructing a provider resource. | STRING |
| 6540 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …/testdata/codegen/provider-type-schema/python/setup.py | 5 | CODE | |
| LOW | …/testdata/codegen/provider-type-schema/python/setup.py | 6 | CODE | |
| LOW | …/testdata/codegen/provider-type-schema/python/setup.py | 8 | CODE | |
| LOW | …/testdata/codegen/provider-type-schema/python/setup.py | 9 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 5 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 6 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 10 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 10 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 10 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 10 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 12 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 12 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 12 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 14 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 14 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 14 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/__init__.py | 5 | CODE | |
| LOW | …der-type-schema/python/pulumi_providerType/__init__.py | 9 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 6 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 10 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 10 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 10 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 10 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 12 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 12 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 12 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 14 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 14 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 14 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/__init__.py | 5 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/__init__.py | 6 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/__init__.py | 7 | CODE | |
| LOW | …e-schema/python/pulumi_providerType/submod/__init__.py | 9 | CODE | |
| LOW | …stdata/codegen/output-funcs-tfbridge20/python/setup.py | 5 | CODE | |
| LOW | …stdata/codegen/output-funcs-tfbridge20/python/setup.py | 6 | CODE | |
| LOW | …stdata/codegen/output-funcs-tfbridge20/python/setup.py | 8 | CODE | |
| LOW | …stdata/codegen/output-funcs-tfbridge20/python/setup.py | 9 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 5 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 6 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 10 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 10 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 10 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 10 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 12 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 12 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 12 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 14 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 14 | CODE | |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 14 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 6 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 10 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 10 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 10 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 10 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 10 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 15 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 12 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 12 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 14 | CODE | |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 14 | CODE | |
| 20201 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | tests/integration/integration_test.go | 86 | prefix := "lorem ipsum dolor sit amet" // 26 | CODE |
| LOW | tests/integration/integration_test.go | 86 | prefix := "lorem ipsum dolor sit amet" // 26 | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 34 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 34 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 35 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 35 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 36 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 36 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 37 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 37 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 38 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 38 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 39 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 39 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 40 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 40 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 41 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 41 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 42 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 42 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 43 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 43 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 44 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 44 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 45 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 45 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 46 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 46 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 47 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 47 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 48 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 48 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 49 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 49 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 50 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 50 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 51 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 51 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 52 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 52 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 53 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 53 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 54 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 54 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 55 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 55 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 56 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 56 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 57 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 57 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 58 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 58 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 59 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 59 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 60 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 60 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 61 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 61 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 62 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| LOW⚡ | …stdata/published/tsc/projects/l1-output-array/index.ts | 62 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna | CODE |
| 4764 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | tests/smoke/smoke_test.go | 1 | // Copyright 2023, Pulumi Corporation. | COMMENT |
| LOW | tests/smoke/main_test.go | 1 | // Copyright 2017, Pulumi Corporation. | COMMENT |
| LOW | …/codegen/output-funcs-tfbridge20/go/mypkg/getAmiIds.go | 21 | if err != nil { | COMMENT |
| LOW | …/codegen/output-funcs-tfbridge20/go/mypkg/getAmiIds.go | 61 | options := pulumi.InvokeOutputOptions{InvokeOptions: internal.PkgInvokeDefaultOpts(opts)} | COMMENT |
| LOW | …utput-funcs-tfbridge20/go-extras/tests/codegen_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …t-funcs-tfbridge20/nodejs-extras/tests/codegen.spec.ts | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …t-funcs-tfbridge20/python-extras/tests/test_codegen.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …d-types/go/azure/documentdb/sqlResourceSqlContainer.go | 21 | // | COMMENT |
| LOW | …d-types/go/azure/documentdb/sqlResourceSqlContainer.go | 41 | // }, | COMMENT |
| LOW | …d-types/go/azure/documentdb/sqlResourceSqlContainer.go | 61 | // Path: pulumi.String("/*"), | COMMENT |
| LOW | …d-types/go/azure/documentdb/sqlResourceSqlContainer.go | 81 | // }, | COMMENT |
| LOW | …egen/kubernetes20/go/kubernetes/meta/v1/pulumiTypes.go | 381 | // Populated by the system when a graceful deletion is requested. Read-only. More info: https://git.k8s.io/community/co | COMMENT |
| LOW | …egen/kubernetes20/go/kubernetes/meta/v1/pulumiTypes.go | 401 | // Must be a DNS_LABEL. Cannot be updated. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects | COMMENT |
| LOW | …egen/kubernetes20/go/kubernetes/meta/v1/pulumiTypes.go | 441 | // | COMMENT |
| LOW | …degen/regress-go-12971/go-extras/tests/codegen_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …egen/plain-and-default/go-extras/tests/codegen_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …n/regress-py-14539/python-extras/tests/test_codegen.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …e-schema-pyproject/python-extras/tests/test_codegen.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …simple-resource-schema/go-extras/tests/codegen_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …le-resource-schema/nodejs-extras/tests/codegen.spec.ts | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …le-resource-schema/python-extras/tests/test_codegen.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …n/regress-py-17219/python-extras/tests/strict_check.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …n/regress-py-17219/python-extras/tests/test_codegen.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …n/regress-py-14012/python-extras/tests/test_codegen.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …n/regress-py-12546/python-extras/tests/test_codegen.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …a/codegen/output-funcs/go-extras/tests/codegen_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …degen/output-funcs/nodejs-extras/tests/codegen.spec.ts | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …degen/output-funcs/python-extras/tests/test_codegen.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …/plain-object-defaults/go-extras/tests/codegen_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/policy_new/policy_new_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/config/config_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/destroy_output_summary_test.go | 1 | // Copyright 2026, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/state_taint_untaint_test.go | 1 | // Copyright 2025, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/refresh_output_summary_test.go | 1 | // Copyright 2026, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/preview_output_summary_test.go | 1 | // Copyright 2026, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_bun_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/up_output_summary_test.go | 1 | // Copyright 2026, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_go_acceptance_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_acceptance_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_python_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_python_acceptance_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_util_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_posix_test.go | 1 | // Copyright 2024, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/appdash_test.go | 1 | // Copyright 2021, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_nodejs_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_nodejs_test.go | 961 | COMMENT | |
| LOW | tests/integration/integration_nodejs_test.go | 2901 | e.RunCommand("pulumi", "login", "--cloud-url", e.LocalURL()) | COMMENT |
| LOW | tests/integration/state_protect_unprotect_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/exit_codes_test.go | 1 | // Copyright 2026, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_go_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/integration_nodejs_acceptance_test.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/main_test.go | 1 | // Copyright 2025, Pulumi Corporation. | COMMENT |
| LOW | …tion/delete_before_create/delete_before_create_test.go | 1 | // Copyright 2018, Pulumi Corporation. | COMMENT |
| LOW | tests/integration/delete_before_create/step3/index.ts | 1 | // Copyright 2016, Pulumi Corporation. All rights reserved. | COMMENT |
| LOW | tests/integration/delete_before_create/step2/index.ts | 1 | // Copyright 2016, Pulumi Corporation. All rights reserved. | COMMENT |
| LOW | tests/integration/delete_before_create/step5/index.ts | 1 | // Copyright 2016, Pulumi Corporation. All rights reserved. | COMMENT |
| LOW | …ent_methods_resources/testcomponent-python/__main__.py | 1 | # Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …component_methods_resources/testcomponent-go/random.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| LOW | …t_component_methods_resources/testcomponent-go/main.go | 1 | // Copyright 2016, Pulumi Corporation. | COMMENT |
| 3757 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …der-type-schema/python/pulumi_providerType/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …e-schema/python/pulumi_providerType/submod/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …utput-funcs-tfbridge20/python/pulumi_mypkg/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/_inputs.py | 17 | __all__ = [ | CODE |
| LOW | …ut-funcs-tfbridge20/python/pulumi_mypkg/get_ami_ids.py | 19 | __all__ = [ | CODE |
| LOW | …dge20/python/pulumi_mypkg/list_storage_account_keys.py | 18 | __all__ = [ | CODE |
| LOW | …output-funcs-tfbridge20/python/pulumi_mypkg/outputs.py | 17 | __all__ = [ | CODE |
| LOW | …ve-nested-types/python/pulumi_azure_native/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …_azure_native/documentdb/sql_resource_sql_container.py | 18 | __all__ = ['SqlResourceSqlContainerArgs', 'SqlResourceSqlContainer'] | CODE |
| LOW | …types/python/pulumi_azure_native/documentdb/outputs.py | 18 | __all__ = [ | CODE |
| LOW | …-resource-schema/python/pulumi_example/arg_function.py | 18 | __all__ = [ | CODE |
| LOW | …rnal-resource-schema/python/pulumi_example/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …/external-resource-schema/python/pulumi_example/cat.py | 19 | __all__ = ['CatArgs', 'Cat'] | CODE |
| LOW | …ernal-resource-schema/python/pulumi_example/_inputs.py | 18 | __all__ = [ | CODE |
| LOW | …rnal-resource-schema/python/pulumi_example/workload.py | 18 | __all__ = ['WorkloadArgs', 'Workload'] | CODE |
| LOW | …nal-resource-schema/python/pulumi_example/component.py | 19 | __all__ = ['ComponentArgs', 'Component'] | CODE |
| LOW | …egen/kubernetes20/python/pulumi_kubernetes/provider.py | 18 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …degen/kubernetes20/python/pulumi_kubernetes/_inputs.py | 17 | __all__ = [ | CODE |
| LOW | …es20/python/pulumi_kubernetes/core/v1/ConfigMapList.py | 20 | __all__ = ['ConfigMapListArgs', 'ConfigMapList'] | CODE |
| LOW | …bernetes20/python/pulumi_kubernetes/core/v1/_inputs.py | 18 | __all__ = [ | CODE |
| LOW | …rnetes20/python/pulumi_kubernetes/core/v1/ConfigMap.py | 18 | __all__ = ['ConfigMapInitArgs', 'ConfigMap'] | CODE |
| LOW | …bernetes20/python/pulumi_kubernetes/core/v1/outputs.py | 18 | __all__ = [ | CODE |
| LOW | …bernetes20/python/pulumi_kubernetes/meta/v1/_inputs.py | 17 | __all__ = [ | CODE |
| LOW | …bernetes20/python/pulumi_kubernetes/meta/v1/outputs.py | 18 | __all__ = [ | CODE |
| LOW | …etes20/python/pulumi_kubernetes/yaml/v2/ConfigGroup.py | 17 | __all__ = ['ConfigGroupArgs', 'ConfigGroup'] | CODE |
| LOW | …bernetes20/python/pulumi_kubernetes/helm/v3/Release.py | 17 | __all__ = ['ReleaseArgs', 'Release'] | CODE |
| LOW | …codegen/different-enum/python/pulumi_plant/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …/codegen/different-enum/python/pulumi_plant/_inputs.py | 18 | __all__ = [ | CODE |
| LOW | …a/codegen/different-enum/python/pulumi_plant/_enums.py | 9 | __all__ = [ | CODE |
| LOW | …/codegen/different-enum/python/pulumi_plant/outputs.py | 18 | __all__ = [ | CODE |
| LOW | …/different-enum/python/pulumi_plant/tree/v1/nursery.py | 18 | __all__ = ['NurseryArgs', 'Nursery'] | CODE |
| LOW | …ferent-enum/python/pulumi_plant/tree/v1/rubber_tree.py | 21 | __all__ = ['RubberTreeArgs', 'RubberTree'] | CODE |
| LOW | …n/different-enum/python/pulumi_plant/tree/v1/_enums.py | 9 | __all__ = [ | CODE |
| LOW | …en/naming-collisions/python/pulumi_example/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …en/naming-collisions/python/pulumi_example/resource.py | 17 | __all__ = ['ResourceArgs', 'Resource'] | CODE |
| LOW | …ing-collisions/python/pulumi_example/resource_input.py | 17 | __all__ = ['ResourceInputArgs', 'ResourceInput'] | CODE |
| LOW | …egen/naming-collisions/python/pulumi_example/_enums.py | 9 | __all__ = [ | CODE |
| LOW | …ing-collisions/python/pulumi_example/main_component.py | 17 | __all__ = ['MainComponentArgs', 'MainComponent'] | CODE |
| LOW | …ing-collisions/python/pulumi_example/mod/component2.py | 17 | __all__ = ['Component2Args', 'Component2'] | CODE |
| LOW | …ming-collisions/python/pulumi_example/mod/component.py | 19 | __all__ = ['ComponentArgs', 'Component'] | CODE |
| LOW | …gen/plain-and-default/python/pulumi_foobar/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …degen/plain-and-default/python/pulumi_foobar/_enums.py | 9 | __all__ = [ | CODE |
| LOW | …in-and-default/python/pulumi_foobar/module_resource.py | 18 | __all__ = ['ModuleResourceArgs', 'ModuleResource'] | CODE |
| LOW | …codegen/regress-py-14539/python/pulumi_gcp/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …/python/pulumi_gcp/compute/instancebootdisk/_inputs.py | 18 | __all__ = [ | CODE |
| LOW | …/python/pulumi_gcp/compute/instancebootdisk/outputs.py | 18 | __all__ = [ | CODE |
| LOW | …cp/compute/instancebootdiskinitializeparams/_inputs.py | 17 | __all__ = [ | CODE |
| LOW | …cp/compute/instancebootdiskinitializeparams/outputs.py | 17 | __all__ = [ | CODE |
| LOW | …y-14539/python/pulumi_gcp/compute/instance/instance.py | 18 | __all__ = ['InstanceArgs', 'Instance'] | CODE |
| LOW | …ith-aliases/python/pulumi_example/basic_resource_v3.py | 17 | __all__ = ['BasicResourceV3Args', 'BasicResourceV3'] | CODE |
| LOW | …esource-with-aliases/python/pulumi_example/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …ith-aliases/python/pulumi_example/basic_resource_v2.py | 17 | __all__ = ['BasicResourceV2Args', 'BasicResourceV2'] | CODE |
| LOW | …e-with-aliases/python/pulumi_example/basic_resource.py | 17 | __all__ = ['BasicResourceArgs', 'BasicResource'] | CODE |
| LOW | …en/legacy-names/python/pulumi_legacy_names/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …egen/legacy-names/python/pulumi_legacy_names/_enums.py | 9 | __all__ = [ | CODE |
| LOW | …y-names/python/pulumi_legacy_names/example_resource.py | 19 | __all__ = ['Example_resourceArgs', 'Example_resource'] | CODE |
| LOW | …ames/python/pulumi_legacy_names/http_module/_inputs.py | 17 | __all__ = [ | CODE |
| LOW | …mple-yaml-schema/python/pulumi_example/arg_function.py | 18 | __all__ = [ | CODE |
| LOW | …n/simple-yaml-schema/python/pulumi_example/provider.py | 17 | __all__ = ['ProviderArgs', 'Provider'] | CODE |
| LOW | …en/simple-yaml-schema/python/pulumi_example/_inputs.py | 19 | __all__ = [ | CODE |
| 1588 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …r-type-schema/python/pulumi_providerType/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …tput-funcs-tfbridge20/nodejs/listStorageAccountKeys.ts | 50 | export function listStorageAccountKeysOutput(args: ListStorageAccountKeysOutputArgs, opts?: pulumi.InvokeOutputOptions): | CODE |
| LOW | …put-funcs-tfbridge20/python/pulumi_mypkg/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …dge20/python/pulumi_mypkg/list_storage_account_keys.py | 53 | def list_storage_account_keys(account_name: Optional[_builtins.str] = None, | CODE |
| LOW | …dge20/python/pulumi_mypkg/list_storage_account_keys.py | 74 | def list_storage_account_keys_output(account_name: pulumi.Input[Optional[_builtins.str]] = None, | CODE |
| LOW | …t-funcs-tfbridge20/python-extras/tests/test_codegen.py | 63 | def assert_function_matches_table(fn, table): | CODE |
| LOW | …t-funcs-tfbridge20/python-extras/tests/test_codegen.py | 93 | def test_list_storage_accounts(my_mocks): | CODE |
| LOW | …-nested-types/python/pulumi_azure_native/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …al-resource-schema/python/pulumi_example/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …ts/testdata/codegen/kubernetes20/nodejs/types/input.ts | 22 | export function kubeClientSettingsProvideDefaults(val: KubeClientSettings): KubeClientSettings { | CODE |
| LOW | …en/kubernetes20/python/pulumi_kubernetes/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …bernetes20/python/pulumi_kubernetes/meta/v1/_inputs.py | 485 | def deletion_grace_period_seconds(self) -> pulumi.Input[Optional[_builtins.int]]: | CODE |
| LOW | …bernetes20/python/pulumi_kubernetes/meta/v1/_inputs.py | 492 | def deletion_grace_period_seconds(self, value: pulumi.Input[Optional[_builtins.int]]): | CODE |
| LOW | …bernetes20/python/pulumi_kubernetes/meta/v1/outputs.py | 375 | def deletion_grace_period_seconds(self) -> Optional[_builtins.int]: | CODE |
| LOW | …/testdata/codegen/different-enum/nodejs/types/input.ts | 20 | export function containerArgsProvideDefaults(val: ContainerArgs): ContainerArgs { | CODE |
| LOW | …degen/different-enum/python/pulumi_plant/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …/naming-collisions/python/pulumi_example/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …n/plain-and-default/python/pulumi_foobar/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …degen/regress-py-14539/python/pulumi_gcp/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …ource-with-aliases/python/pulumi_example/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …/legacy-names/python/pulumi_legacy_names/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …simple-yaml-schema/python/pulumi_example/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …ssets-and-archives/python/pulumi_example/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …t-setuppy/python/pulumi_typedDictExample/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …8403/python/pulumi_mongodbatlas/get_custom_db_roles.py | 57 | def get_custom_db_roles_output(opts: Optional[Union[pulumi.InvokeOptions, pulumi.InvokeOutputOptions]] = None) -> pulumi | CODE |
| LOW | …/regress-8403/python/pulumi_mongodbatlas/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …e-schema-pyproject/python/pulumi_example/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …n/regress-node-8110/python/pulumi_my8110/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …ypes-in-config/python/pulumi_credentials/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …le-resource-schema/python/pulumi_example/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …regress-py-17219/python/pulumi_cloudinit/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …gen/embedded-crd-types/python/pulumi_foo/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …lain-resource/python/pulumi_metaprovider/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …en/urn-id-properties/python/pulumi_urnid/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …egress-py-tfbridge-611/python/pulumi_aws/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …dge-611/python/pulumi_aws/x/iam/get_policy_document.py | 79 | def get_policy_document_output(statements: pulumi.Input[Optional[Optional[Sequence[Union['_x.GetPolicyDocumentStatementA | CODE |
| LOW | …degen/regress-py-14012/python/pulumi_foo/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …gen/regress-py-12980/python/pulumi_myPkg/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW⚡ | …py-12980/python/pulumi_myPkg/mymod/childb/member_b2.py | 96 | def enum_from_different_module(self) -> pulumi.Output[Optional['mymod.childa.EnumA']]: | CODE |
| LOW⚡ | …py-12980/python/pulumi_myPkg/mymod/childb/member_b2.py | 106 | def object_from_different_module(self) -> pulumi.Output[Optional['_mymod.childa.outputs.ObjectA']]: | CODE |
| LOW⚡ | …py-12980/python/pulumi_myPkg/mymod/childb/member_b2.py | 116 | def resource_from_different_module(self) -> pulumi.Output[Optional['_mymod.childa.MemberA1']]: | CODE |
| LOW⚡ | …py-12980/python/pulumi_myPkg/mymod/childb/member_b2.py | 121 | def resource_from_same_module(self) -> pulumi.Output[Optional['MemberB1']]: | CODE |
| LOW | …e-property-overlap/python/pulumi_example/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …n/output-funcs-edgeorder/nodejs/listProductFamilies.ts | 60 | export function listProductFamiliesOutput(args: ListProductFamiliesOutputArgs, opts?: pulumi.InvokeOutputOptions): pulum | CODE |
| LOW | …order/python/pulumi_myedgeorder/list_configurations.py | 89 | def list_configurations_output(configuration_filters: pulumi.Input[Optional[Sequence[Union['ConfigurationFilters', 'Conf | CODE |
| LOW | …uncs-edgeorder/python/pulumi_myedgeorder/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …der/python/pulumi_myedgeorder/list_product_families.py | 92 | def list_product_families_output(customer_subscription_details: pulumi.Input[Optional[Optional[Union['CustomerSubscripti | CODE |
| LOW | …gen/regress-py-12546/python/pulumi_plant/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …n/regress-py-12546/python-extras/tests/test_codegen.py | 53 | def test_default_value_does_not_trigger_deprecation_warning(my_mocks): | CODE |
| LOW | …ata/codegen/dashed-import-schema/nodejs/types/input.ts | 20 | export function containerArgsProvideDefaults(val: ContainerArgs): ContainerArgs { | CODE |
| LOW | …dashed-import-schema/python/pulumi_plant/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …ngle-value-returns/python/pulumi_example/_utilities.py | 106 | def get_resource_opts_defaults() -> pulumi.ResourceOptions: | CODE |
| LOW | …/codegen/output-funcs/nodejs/listStorageAccountKeys.ts | 50 | export function listStorageAccountKeysOutput(args: ListStorageAccountKeysOutputArgs, opts?: pulumi.InvokeOutputOptions): | CODE |
| LOW | …degen/output-funcs/nodejs/funcWithAllOptionalInputs.ts | 10 | export function funcWithAllOptionalInputs(args?: FuncWithAllOptionalInputsArgs, opts?: pulumi.InvokeOptions): Promise<Fu | CODE |
| LOW | …degen/output-funcs/nodejs/funcWithAllOptionalInputs.ts | 36 | export function funcWithAllOptionalInputsOutput(args?: FuncWithAllOptionalInputsOutputArgs, opts?: pulumi.InvokeOutputOp | CODE |
| LOW | …codegen/output-funcs/nodejs/getBastionShareableLink.ts | 50 | export function getBastionShareableLinkOutput(args: GetBastionShareableLinkOutputArgs, opts?: pulumi.InvokeOutputOptions | CODE |
| LOW | …t-funcs/nodejs/getIntegrationRuntimeObjectMetadatum.ts | 13 | export function getIntegrationRuntimeObjectMetadatum(args: GetIntegrationRuntimeObjectMetadatumArgs, opts?: pulumi.Invok | CODE |
| LOW | …t-funcs/nodejs/getIntegrationRuntimeObjectMetadatum.ts | 59 | export function getIntegrationRuntimeObjectMetadatumOutput(args: GetIntegrationRuntimeObjectMetadatumOutputArgs, opts?: | CODE |
| LOW | …ta/codegen/output-funcs/nodejs/funcWithDefaultValue.ts | 29 | export function funcWithDefaultValueOutput(args: FuncWithDefaultValueOutputArgs, opts?: pulumi.InvokeOutputOptions): pul | CODE |
| LOW | …tput-funcs/python/pulumi_mypkg/func_with_dict_param.py | 60 | def func_with_dict_param_output(a: pulumi.Input[Optional[Optional[Mapping[str, _builtins.str]]]] = None, | CODE |
| 1018 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …r-type-schema/python/pulumi_providerType/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …put-funcs-tfbridge20/python/pulumi_mypkg/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …-nested-types/python/pulumi_azure_native/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …al-resource-schema/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …en/kubernetes20/python/pulumi_kubernetes/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …degen/different-enum/python/pulumi_plant/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …/naming-collisions/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …n/plain-and-default/python/pulumi_foobar/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …degen/regress-py-14539/python/pulumi_gcp/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …ource-with-aliases/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …/legacy-names/python/pulumi_legacy_names/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …simple-yaml-schema/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …ssets-and-archives/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …t-setuppy/python/pulumi_typedDictExample/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …/regress-8403/python/pulumi_mongodbatlas/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …e-schema-pyproject/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …n/regress-node-8110/python/pulumi_my8110/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …ypes-in-config/python/pulumi_credentials/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …le-resource-schema/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …regress-py-17219/python/pulumi_cloudinit/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …gen/embedded-crd-types/python/pulumi_foo/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …lain-resource/python/pulumi_metaprovider/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …en/urn-id-properties/python/pulumi_urnid/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …egress-py-tfbridge-611/python/pulumi_aws/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …degen/regress-py-14012/python/pulumi_foo/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …gen/regress-py-12980/python/pulumi_myPkg/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …e-property-overlap/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …uncs-edgeorder/python/pulumi_myedgeorder/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …gen/regress-py-12546/python/pulumi_plant/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …dashed-import-schema/python/pulumi_plant/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …ngle-value-returns/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …codegen/output-funcs/python/pulumi_mypkg/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …y/python/pulumi_typedDictDisabledExample/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …url/python/pulumi_registrygeoreplication/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …n-same-module-name/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …ple-methods-schema/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …in-object-defaults/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …onfig-schema/python/pulumi_configstation/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …/dash-named-schema/python/pulumi_foo_bar/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …degen/cyclic-types/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …/codegen/nested-module/python/pulumi_foo/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …-with-root-package/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …n/hyphenated-symbols/python/pulumi_repro/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …/nested-module-thirdparty/python/foo_bar/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …t-disable-defaults/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …-pypackage-name/python/custom_py_package/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …source-args-python/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …pyproject/python/pulumi_typedDictExample/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …n-case-insensitive/python/pulumi_example/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| MEDIUM | tests/integration/integration_go_test.go | 1677 | // guarantee their order, and delve changed it in 1.27 (exited now precedes terminated), so read | COMMENT |
| MEDIUM | …/integration/dependency_steps/dependency_steps_test.go | 24 | // resources is inverted between updates. The snapshot should be robust to this | COMMENT |
| MEDIUM | sdk/go/auto/local_workspace.go | 135 | // LocalWorkspace does not utilize this extensibility point. | COMMENT |
| MEDIUM | sdk/go/auto/local_workspace.go | 143 | // LocalWorkspace does not utilize this extensibility point. | COMMENT |
| LOW | …oml/local/sdks/flaky-46.0.0/pulumi_flaky/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …ref-40.0.0/pulumi_optional_primitive_ref/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …al/sdks/primitive-7.0.0/pulumi_primitive/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …namespaced-16.0.0/a_namespace_namespaced/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …ks/any-handled-42.0.0/pulumi_any_handled/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …-invoke-24.0.0/pulumi_output_only_invoke/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| LOW | …local/sdks/ref-ref-12.0.0/pulumi_ref_ref/_utilities.py | 149 | # Temporary: just use pulumi._utils.lazy_import once everyone upgrades. | COMMENT |
| 393 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …r-type-schema/python/pulumi_providerType/_utilities.py | 67 | CODE | |
| LOW | …put-funcs-tfbridge20/python/pulumi_mypkg/_utilities.py | 67 | CODE | |
| LOW | …-nested-types/python/pulumi_azure_native/_utilities.py | 67 | CODE | |
| LOW | …al-resource-schema/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …en/kubernetes20/python/pulumi_kubernetes/_utilities.py | 67 | CODE | |
| LOW | …bernetes20/python/pulumi_kubernetes/meta/v1/outputs.py | 31 | CODE | |
| LOW | …bernetes20/python/pulumi_kubernetes/meta/v1/outputs.py | 231 | CODE | |
| LOW | …degen/different-enum/python/pulumi_plant/_utilities.py | 67 | CODE | |
| LOW | …/naming-collisions/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …n/plain-and-default/python/pulumi_foobar/_utilities.py | 67 | CODE | |
| LOW | …degen/regress-py-14539/python/pulumi_gcp/_utilities.py | 67 | CODE | |
| LOW | …ource-with-aliases/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …/legacy-names/python/pulumi_legacy_names/_utilities.py | 67 | CODE | |
| LOW | …simple-yaml-schema/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …ssets-and-archives/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …t-setuppy/python/pulumi_typedDictExample/_utilities.py | 67 | CODE | |
| LOW | …/regress-8403/python/pulumi_mongodbatlas/_utilities.py | 67 | CODE | |
| LOW | …e-schema-pyproject/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …n/regress-node-8110/python/pulumi_my8110/_utilities.py | 67 | CODE | |
| LOW | …ypes-in-config/python/pulumi_credentials/_utilities.py | 67 | CODE | |
| LOW | …le-resource-schema/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …regress-py-17219/python/pulumi_cloudinit/_utilities.py | 67 | CODE | |
| LOW | …gen/embedded-crd-types/python/pulumi_foo/_utilities.py | 67 | CODE | |
| LOW | …lain-resource/python/pulumi_metaprovider/_utilities.py | 67 | CODE | |
| LOW | …en/urn-id-properties/python/pulumi_urnid/_utilities.py | 67 | CODE | |
| LOW | …egress-py-tfbridge-611/python/pulumi_aws/_utilities.py | 67 | CODE | |
| LOW | …degen/regress-py-14012/python/pulumi_foo/_utilities.py | 67 | CODE | |
| LOW | …gen/regress-py-12980/python/pulumi_myPkg/_utilities.py | 67 | CODE | |
| LOW | …e-property-overlap/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …uncs-edgeorder/python/pulumi_myedgeorder/_utilities.py | 67 | CODE | |
| LOW | …gen/regress-py-12546/python/pulumi_plant/_utilities.py | 67 | CODE | |
| LOW | …dashed-import-schema/python/pulumi_plant/_utilities.py | 67 | CODE | |
| LOW | …ngle-value-returns/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …codegen/output-funcs/python/pulumi_mypkg/_utilities.py | 67 | CODE | |
| LOW | …y/python/pulumi_typedDictDisabledExample/_utilities.py | 67 | CODE | |
| LOW | …url/python/pulumi_registrygeoreplication/_utilities.py | 67 | CODE | |
| LOW | …n-same-module-name/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …ple-methods-schema/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …in-object-defaults/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …onfig-schema/python/pulumi_configstation/_utilities.py | 67 | CODE | |
| LOW | …/dash-named-schema/python/pulumi_foo_bar/_utilities.py | 67 | CODE | |
| LOW | …degen/cyclic-types/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …/codegen/nested-module/python/pulumi_foo/_utilities.py | 67 | CODE | |
| LOW | …-with-root-package/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …n/hyphenated-symbols/python/pulumi_repro/_utilities.py | 67 | CODE | |
| LOW | …/nested-module-thirdparty/python/foo_bar/_utilities.py | 67 | CODE | |
| LOW | …t-disable-defaults/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …-pypackage-name/python/custom_py_package/_utilities.py | 67 | CODE | |
| LOW | …source-args-python/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | …pyproject/python/pulumi_typedDictExample/_utilities.py | 67 | CODE | |
| LOW | …n-case-insensitive/python/pulumi_example/_utilities.py | 67 | CODE | |
| LOW | tests/integration/python/translation/__main__.py | 507 | CODE | |
| LOW | tests/integration/python/resource_args/__main__.py | 13 | CODE | |
| LOW | tests/testprovider-py/__main__.py | 43 | CODE | |
| LOW | …oml/local/sdks/flaky-46.0.0/pulumi_flaky/_utilities.py | 67 | CODE | |
| LOW | …ref-40.0.0/pulumi_optional_primitive_ref/_utilities.py | 67 | CODE | |
| LOW | …al/sdks/primitive-7.0.0/pulumi_primitive/_utilities.py | 67 | CODE | |
| LOW | …namespaced-16.0.0/a_namespace_namespaced/_utilities.py | 67 | CODE | |
| LOW | …ks/any-handled-42.0.0/pulumi_any_handled/_utilities.py | 67 | CODE | |
| LOW | …-invoke-24.0.0/pulumi_output_only_invoke/_utilities.py | 67 | CODE | |
| 439 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | …n/regress-py-14012/python-extras/tests/test_codegen.py | 54 | # Create an instance of the provider, but don't pass it the optional `certmanager` argument. | COMMENT |
| MEDIUM⚡ | tests/integration/types/python/declared/__main__.py | 68 | # Create a resource with input object. | COMMENT |
| MEDIUM⚡ | tests/integration/types/python/declared/__main__.py | 71 | # Create a resource using the output object of another resource. | COMMENT |
| MEDIUM⚡ | tests/integration/types/python/declared/__main__.py | 76 | # Create a resource using the output object of another resource, accessing the output as a dict. | COMMENT |
| MEDIUM⚡ | tests/integration/types/python/declared/__main__.py | 81 | # Create a resource using a dict as the input. | COMMENT |
| MEDIUM⚡ | tests/integration/types/python/simple/__main__.py | 34 | # Create a resource with input object. | COMMENT |
| MEDIUM⚡ | tests/integration/types/python/simple/__main__.py | 37 | # Create a resource using the output object of another resource. | COMMENT |
| MEDIUM⚡ | tests/integration/types/python/simple/__main__.py | 42 | # Create a resource using the output object of another resource, accessing the output as a dict. | COMMENT |
| MEDIUM⚡ | tests/integration/types/python/simple/__main__.py | 47 | # Create a resource using a dict as the input. | COMMENT |
| MEDIUM | …sts/integration/dynamic/python-read-inputs/__main__.py | 45 | # Create a simple resource | COMMENT |
| MEDIUM | …/integration/transformations/python/simple/__main__.py | 98 | # Create a future that wil be resolved once we find child2. This is needed because we do not | COMMENT |
| MEDIUM | tests/integration/python/poetry-main/poetry.toml | 2 | # Create the venv inside the project directory so it gets cleaned up when we remove the temp directory used for the test | COMMENT |
| MEDIUM | …egration/python/poetry-main-and-parent/src/poetry.toml | 2 | # Create the venv inside the project directory so it gets cleaned up when we remove the temp directory used for the test | COMMENT |
| MEDIUM | tests/integration/python/packageadd_poetry/__main__.py | 6 | # Create a GCP resource (Storage Bucket) | COMMENT |
| MEDIUM | tests/integration/python/poetry/poetry.toml | 2 | # Create the venv inside the project directory so it gets cleaned up when we remove the temp directory used for the test | COMMENT |
| MEDIUM | tests/integration/python/poetry-parent/poetry.toml | 2 | # Create the venv inside the project directory so it gets cleaned up when we remove the temp directory used for the test | COMMENT |
| MEDIUM | tests/integration/python/packageadd_pip/__main__.py | 6 | # Create a GCP resource (Storage Bucket) | COMMENT |
| MEDIUM | tests/integration/python/packageadd_uv/__main__.py | 6 | # Create a GCP resource (Storage Bucket) | COMMENT |
| MEDIUM | tests/integration/enums/python/__main__.py | 38 | # Create a resource with input object. | COMMENT |
| MEDIUM | …ackages-install-recursive/python-provider/component.py | 31 | # Create a typescript-a component to demonstrate the dependency | COMMENT |
| MEDIUM | sdk/python/cmd/pulumi-language-python/main_test.go | 275 | # Create the venv inside the project directory so it gets cleaned up when we remove the temp directory used for the test | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/test_invoke.py | 234 | # Create a resource with an unknown ID. | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/test_invoke.py | 237 | # Create an output that depends on the resource. | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/langhost/types/__main__.py | 49 | # Create a resource with input object. | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/langhost/types/__main__.py | 54 | # Create a resource using the output object of another resource. | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/langhost/types/__main__.py | 63 | # Create a resource using the output object of another resource, accessing the output as a dict. | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/langhost/types/__main__.py | 72 | # Create a resource using a dict as the input. | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/langhost/types/__main__.py | 133 | # Create a resource with input object. | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/langhost/types/__main__.py | 136 | # Create a resource using the output object of another resource. | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/langhost/types/__main__.py | 145 | # Create a resource using the output object of another resource, accessing the output as a dict. | COMMENT |
| MEDIUM⚡ | sdk/python/lib/test/langhost/types/__main__.py | 155 | # Create a resource using a dict as the input. | COMMENT |
| MEDIUM | sdk/python/lib/test/langhost/types/__main__.py | 266 | # Create a resource with input object. | COMMENT |
| MEDIUM | sdk/python/lib/test/langhost/types/__main__.py | 277 | # Create a resource using the output object of another resource. | COMMENT |
| MEDIUM | sdk/python/lib/test/langhost/types/__main__.py | 288 | # Create a resource using the output object of another resource, accessing the output as a dict. | COMMENT |
| MEDIUM | sdk/python/lib/test/langhost/types/__main__.py | 299 | # Create a resource using a dict as the input. | COMMENT |
| MEDIUM | sdk/python/lib/test/langhost/types/__main__.py | 420 | # Create a resource with input object. | COMMENT |
| MEDIUM | sdk/python/lib/test/langhost/types/__main__.py | 431 | # Create a resource using the output object of another resource. | COMMENT |
| MEDIUM | sdk/python/lib/test/langhost/types/__main__.py | 442 | # Create a resource using the output object of another resource, accessing the output as a dict. | COMMENT |
| MEDIUM | sdk/python/lib/test/langhost/types/__main__.py | 454 | # Create a resource using a dict as the input. | COMMENT |
| MEDIUM | …hon/lib/test/langhost/first_class_provider/__main__.py | 27 | # Create a Provider that we'll use to create other resources. | COMMENT |
| MEDIUM | sdk/python/lib/test/automation/test_local_workspace.py | 153 | # Create a stack | COMMENT |
| MEDIUM | sdk/python/lib/pulumi/_types.py | 1252 | # The following functions for creating an __init__() method were adapted | COMMENT |
| MEDIUM | sdk/python/lib/pulumi/runtime/rpc.py | 1216 | # Create a union of deps and the resource. | COMMENT |
| MEDIUM | .github/workflows/ci-run-test.yml | 115 | # Create a coverage file to register a testing job was started. | COMMENT |
| MEDIUM | pkg/cmd/pulumi/insights/insights_account_new.go | 102 | " # Create an AWS Insights account using credentials from an ESC environment\n" + | CODE |
| MEDIUM | pkg/cmd/pulumi/org/org_webhook_new.go | 137 | Example: " # Create a webhook interactively\n" + | CODE |
| MEDIUM | pkg/cmd/pulumi/org/org_role_new.go | 57 | Example: " # Create a role from a JSON file\n" + | CODE |
| MEDIUM | pkg/cmd/pulumi/org/org_role_new.go | 60 | " # Create a role from stdin and get the result as JSON\n" + | CODE |
| MEDIUM | pkg/cmd/pulumi/markdown/gen.go | 119 | fmt.Fprintf(buf, "# This file is auto-generated from github.com/pulumi/pulumi/v3/pkg/cmd/pulumi/markdown\n") | CODE |
| MEDIUM | pkg/cmd/pulumi/project/newcmd/new_test.go | 1285 | # Create an AWS resource (S3 Bucket) | COMMENT |
| MEDIUM | pkg/cmd/pulumi/cloud/api.go | 174 | " # Create a resource via POST; body fields go into a JSON body automatically.\n" + | CODE |
| MEDIUM⚡ | pkg/cmd/pulumi/stack/stack_webhook_new.go | 96 | Example: " # Create a webhook interactively\n" + | CODE |
| MEDIUM⚡ | pkg/cmd/pulumi/stack/stack_webhook_new.go | 98 | " # Create a webhook non-interactively\n" + | CODE |
| MEDIUM⚡ | pkg/cmd/pulumi/stack/stack_webhook_new.go | 100 | " # Create a Slack webhook with specific event filters\n" + | CODE |
| MEDIUM⚡ | pkg/cmd/pulumi/stack/stack_webhook_new.go | 105 | " # Create a webhook and get the result as JSON\n" + | CODE |
| MEDIUM⚡ | pkg/cmd/pulumi/policy/policy_group_new.go | 91 | Example: " # Create a Policy Group interactively\n" + | CODE |
| MEDIUM⚡ | pkg/cmd/pulumi/policy/policy_group_new.go | 93 | " # Create a stack Policy Group non-interactively\n" + | CODE |
| MEDIUM⚡ | pkg/cmd/pulumi/policy/policy_group_new.go | 95 | " # Create an audit-mode account Policy Group\n" + | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | …oml/local/projects/l2-map-keys-adversarial/__main__.py | 19 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …oml/local/projects/l2-map-keys-adversarial/__main__.py | 36 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …n/testdata/toml/local/projects/l3-map-keys/__main__.py | 17 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …published/projects/l2-map-keys-adversarial/__main__.py | 19 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …published/projects/l2-map-keys-adversarial/__main__.py | 36 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …stdata/toml/published/projects/l3-map-keys/__main__.py | 17 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH⚡ | …a/toml/published/projects/l1-output-string/__main__.py | 6 | pulumi.export("escape", "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), | CODE |
| HIGH⚡ | …a/toml/published/projects/l1-output-string/__main__.py | 8 | (newline), \x09 (tab), \x1b (escape), \x07 (bell), \x00 (null), \U000e0021 (tag space)""") | CODE |
| HIGH | …data/toml/published/projects/l1-output-map/__main__.py | 16 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x00 (n | CODE |
| HIGH | …ppy/local/projects/l2-map-keys-adversarial/__main__.py | 19 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …ppy/local/projects/l2-map-keys-adversarial/__main__.py | 36 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …estdata/setuppy/local/projects/l3-map-keys/__main__.py | 17 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …published/projects/l2-map-keys-adversarial/__main__.py | 19 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …published/projects/l2-map-keys-adversarial/__main__.py | 36 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …ata/setuppy/published/projects/l3-map-keys/__main__.py | 17 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH⚡ | …etuppy/published/projects/l1-output-string/__main__.py | 6 | pulumi.export("escape", "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), | CODE |
| HIGH⚡ | …etuppy/published/projects/l1-output-string/__main__.py | 8 | (newline), \x09 (tab), \x1b (escape), \x07 (bell), \x00 (null), \U000e0021 (tag space)""") | CODE |
| HIGH | …a/setuppy/published/projects/l1-output-map/__main__.py | 16 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x00 (n | CODE |
| HIGH | …ses/local/projects/l2-map-keys-adversarial/__main__.py | 19 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …ses/local/projects/l2-map-keys-adversarial/__main__.py | 36 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …estdata/classes/local/projects/l3-map-keys/__main__.py | 17 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …published/projects/l2-map-keys-adversarial/__main__.py | 19 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …published/projects/l2-map-keys-adversarial/__main__.py | 36 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH | …ata/classes/published/projects/l3-map-keys/__main__.py | 17 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x0 | CODE |
| HIGH⚡ | …lasses/published/projects/l1-output-string/__main__.py | 6 | pulumi.export("escape", "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), | CODE |
| HIGH⚡ | …lasses/published/projects/l1-output-string/__main__.py | 8 | (newline), \x09 (tab), \x1b (escape), \x07 (bell), \x00 (null), \U000e0021 (tag space)""") | CODE |
| HIGH | …a/classes/published/projects/l1-output-map/__main__.py | 16 | "Some ${common} \"characters\" 'that' need escaping: \\ (backslash), \x09 (tab), \x1b (escape), \x07 (bell), \x00 (n | CODE |
| HIGH | sdk/python/lib/pulumi/resource.py | 1323 | deployments and may be missing (undefined) during planning phases. | STRING |
| HIGH | sdk/python/lib/pulumi/runtime/rpc.py | 1598 | # can propagate its final value. Otherwise, it must be undefined, since we don't know | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …nal-resource-schema/python/pulumi_example/component.py | 101 | CODE | |
| LOW | …nal-resource-schema/python/pulumi_example/component.py | 138 | CODE | |
| LOW | …rnetes20/python/pulumi_kubernetes/core/v1/ConfigMap.py | 128 | CODE | |
| LOW | …rnetes20/python/pulumi_kubernetes/core/v1/ConfigMap.py | 171 | CODE | |
| LOW | …bernetes20/python/pulumi_kubernetes/meta/v1/_inputs.py | 361 | CODE | |
| LOW | …bernetes20/python/pulumi_kubernetes/meta/v1/outputs.py | 263 | CODE | |
| LOW | …in-and-default/python/pulumi_foobar/module_resource.py | 22 | CODE | |
| LOW | …in-and-default/python/pulumi_foobar/module_resource.py | 261 | CODE | |
| LOW | …in-and-default/python/pulumi_foobar/module_resource.py | 309 | CODE | |
| LOW | …ta/codegen/output-funcs/python/pulumi_mypkg/outputs.py | 349 | CODE | |
| LOW | …gen/simple-methods-schema/python/pulumi_example/foo.py | 97 | CODE | |
| LOW | …a-with-root-package/python/pulumi_example/component.py | 137 | CODE | |
| LOW | …a-with-root-package/python/pulumi_example/component.py | 177 | CODE | |
| LOW | tests/integration/python/translation/__main__.py | 69 | CODE | |
| LOW | tests/integration/python/translation/__main__.py | 184 | CODE | |
| LOW | tests/integration/python/translation/__main__.py | 261 | CODE | |
| LOW | tests/integration/python/translation/__main__.py | 356 | CODE | |
| LOW | …ocal/sdks/primitive-7.0.0/pulumi_primitive/resource.py | 96 | CODE | |
| LOW | …ocal/sdks/primitive-7.0.0/pulumi_primitive/resource.py | 133 | CODE | |
| LOW | …lprimitive-34.0.0/pulumi_optionalprimitive/resource.py | 102 | CODE | |
| LOW | …lprimitive-34.0.0/pulumi_optionalprimitive/resource.py | 139 | CODE | |
| LOW | …oml/local/sdks/secret-14.0.0/pulumi_secret/resource.py | 120 | CODE | |
| LOW | …oml/local/sdks/secret-14.0.0/pulumi_secret/resource.py | 159 | CODE | |
| LOW | …data/toml/local/sdks/enum-30.0.0/pulumi_enum/deluxe.py | 105 | CODE | |
| LOW | …data/toml/local/sdks/enum-30.0.0/pulumi_enum/deluxe.py | 142 | CODE | |
| LOW | …/sdks/config-grpc-1.0.0/pulumi_config_grpc/provider.py | 23 | CODE | |
| LOW | …/sdks/config-grpc-1.0.0/pulumi_config_grpc/provider.py | 1184 | CODE | |
| LOW | …/sdks/config-grpc-1.0.0/pulumi_config_grpc/provider.py | 1311 | CODE | |
| LOW | …sdks/config-grpc-1.0.0/pulumi_config_grpc/to_secret.py | 903 | CODE | |
| LOW | …sdks/config-grpc-1.0.0/pulumi_config_grpc/to_secret.py | 1200 | CODE | |
| LOW | …sdks/config-grpc-1.0.0/pulumi_config_grpc/to_secret.py | 28 | CODE | |
| LOW | …shed/sdks/primitive-7.0.0/pulumi_primitive/resource.py | 96 | CODE | |
| LOW | …shed/sdks/primitive-7.0.0/pulumi_primitive/resource.py | 133 | CODE | |
| LOW | …lprimitive-34.0.0/pulumi_optionalprimitive/resource.py | 102 | CODE | |
| LOW | …lprimitive-34.0.0/pulumi_optionalprimitive/resource.py | 139 | CODE | |
| LOW | …published/sdks/secret-14.0.0/pulumi_secret/resource.py | 120 | CODE | |
| LOW | …published/sdks/secret-14.0.0/pulumi_secret/resource.py | 159 | CODE | |
| LOW | …/toml/published/sdks/enum-30.0.0/pulumi_enum/deluxe.py | 105 | CODE | |
| LOW | …/toml/published/sdks/enum-30.0.0/pulumi_enum/deluxe.py | 142 | CODE | |
| LOW | …/sdks/config-grpc-1.0.0/pulumi_config_grpc/provider.py | 23 | CODE | |
| LOW | …/sdks/config-grpc-1.0.0/pulumi_config_grpc/provider.py | 1184 | CODE | |
| LOW | …/sdks/config-grpc-1.0.0/pulumi_config_grpc/provider.py | 1311 | CODE | |
| LOW | …sdks/config-grpc-1.0.0/pulumi_config_grpc/to_secret.py | 903 | CODE | |
| LOW | …sdks/config-grpc-1.0.0/pulumi_config_grpc/to_secret.py | 1200 | CODE | |
| LOW | …sdks/config-grpc-1.0.0/pulumi_config_grpc/to_secret.py | 28 | CODE | |
| LOW | …ocal/sdks/primitive-7.0.0/pulumi_primitive/resource.py | 96 | CODE | |
| LOW | …ocal/sdks/primitive-7.0.0/pulumi_primitive/resource.py | 133 | CODE | |
| LOW | …lprimitive-34.0.0/pulumi_optionalprimitive/resource.py | 102 | CODE | |
| LOW | …lprimitive-34.0.0/pulumi_optionalprimitive/resource.py | 139 | CODE | |
| LOW | …ppy/local/sdks/secret-14.0.0/pulumi_secret/resource.py | 120 | CODE | |
| LOW | …ppy/local/sdks/secret-14.0.0/pulumi_secret/resource.py | 159 | CODE | |
| LOW | …a/setuppy/local/sdks/enum-30.0.0/pulumi_enum/deluxe.py | 105 | CODE | |
| LOW | …a/setuppy/local/sdks/enum-30.0.0/pulumi_enum/deluxe.py | 142 | CODE | |
| LOW | …/sdks/config-grpc-1.0.0/pulumi_config_grpc/provider.py | 23 | CODE | |
| LOW | …/sdks/config-grpc-1.0.0/pulumi_config_grpc/provider.py | 1184 | CODE | |
| LOW | …/sdks/config-grpc-1.0.0/pulumi_config_grpc/provider.py | 1311 | CODE | |
| LOW | …sdks/config-grpc-1.0.0/pulumi_config_grpc/to_secret.py | 903 | CODE | |
| LOW | …sdks/config-grpc-1.0.0/pulumi_config_grpc/to_secret.py | 1200 | CODE | |
| LOW | …sdks/config-grpc-1.0.0/pulumi_config_grpc/to_secret.py | 28 | CODE | |
| LOW | …shed/sdks/primitive-7.0.0/pulumi_primitive/resource.py | 96 | CODE | |
| 73 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | …tion/python/stale-parameterized-packageref/__main__.py | 20 | except Exception: | CODE |
| HIGH | sdk/python/lib/test/test_utils.py | 143 | except AttributeError: | CODE |
| HIGH | …python/lib/test/provider/experimental/test_provider.py | 28 | except ValueError: | CODE |
| HIGH | sdk/python/lib/pulumi/output.py | 167 | except KeyError: | CODE |
| HIGH | sdk/python/lib/pulumi/runtime/rpc.py | 120 | except ImportError: | CODE |
| HIGH | sdk/python/lib/pulumi/runtime/rpc.py | 131 | except ImportError: | CODE |
| HIGH | sdk/python/lib/pulumi/runtime/stack.py | 474 | except TypeError: | CODE |
| HIGH | sdk/python/lib/pulumi/runtime/stack.py | 222 | except ResourceRegistrationFailed: | CODE |
| HIGH | sdk/python/lib/pulumi/provider/server.py | 547 | except KeyboardInterrupt: | CODE |
| HIGH | sdk/python/lib/pulumi/provider/experimental/server.py | 697 | except KeyboardInterrupt: | CODE |
| HIGH | sdk/python/lib/pulumi/provider/experimental/analyzer.py | 60 | except ImportError: | CODE |
| HIGH | sdk/python/lib/pulumi/provider/experimental/analyzer.py | 68 | except ImportError: | CODE |
| HIGH | sdk/python/lib/pulumi/provider/experimental/analyzer.py | 777 | except Exception: # noqa | CODE |
| HIGH | sdk/python/lib/pulumi/automation/_cmd.py | 119 | except Exception: # noqa: BLE001 catch blind exception | CODE |
| HIGH | sdk/python/lib/pulumi/automation/_cmd.py | 217 | except ValueError: | CODE |
| HIGH | scripts/wasm-size-check.py | 13 | except (FileNotFoundError, ValueError): | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …tion/python/stale-parameterized-packageref/__main__.py | 20 | except Exception: | CODE |
| LOW | …ts/integration/python_await/error_handling/__main__.py | 13 | except Exception: | CODE |
| MEDIUM | …ts/integration/python_await/error_handling/__main__.py | 10 | def catches(): | CODE |
| MEDIUM | docs/make.py | 207 | print(f"Error: {error}") | CODE |
| LOW | sdk/python/cmd/pulumi-language-python/main.go | 567 | except Exception: | CODE |
| LOW | sdk/python/lib/test/runtime/test_callbacks.py | 123 | except Exception as e: | CODE |
| LOW | sdk/python/lib/test/runtime/test_callbacks.py | 133 | except Exception as e: | CODE |
| LOW | sdk/python/lib/test/runtime/test_stack.py | 64 | except Exception: | CODE |
| LOW⚡ | …python/lib/test/provider/experimental/test_analyzer.py | 104 | except Exception as e: | CODE |
| LOW⚡ | …python/lib/test/provider/experimental/test_analyzer.py | 1280 | except Exception as e: | CODE |
| LOW⚡ | …python/lib/test/provider/experimental/test_analyzer.py | 1332 | except Exception as e: | CODE |
| LOW | …python/lib/test/provider/experimental/test_analyzer.py | 1078 | except Exception as e: | CODE |
| LOW | …python/lib/test/provider/experimental/test_analyzer.py | 1111 | except Exception as e: | CODE |
| LOW | …python/lib/test/provider/experimental/test_analyzer.py | 1137 | except Exception as e: | CODE |
| LOW | …python/lib/test/provider/experimental/test_analyzer.py | 1546 | except Exception as e: | CODE |
| LOW | sdk/python/lib/test/automation/test_stack.py | 91 | except Exception as e: | CODE |
| LOW⚡ | sdk/python/lib/test/automation/test_stack.py | 103 | except Exception as e: | CODE |
| LOW⚡ | sdk/python/lib/test/automation/test_stack.py | 110 | except Exception as e: | CODE |
| LOW⚡ | sdk/python/lib/test/automation/test_stack.py | 117 | except Exception as e: | CODE |
| LOW | sdk/python/lib/test/automation/test_fork.py | 62 | except Exception as e: | CODE |
| LOW | sdk/python/lib/test/automation/test_cmd.py | 38 | except Exception as exception: | CODE |
| LOW | sdk/python/lib/pulumi/config.py | 193 | except Exception as e: | CODE |
| LOW | sdk/python/lib/pulumi/config.py | 258 | except Exception as e: | CODE |
| LOW | sdk/python/lib/pulumi/config.py | 325 | except Exception as e: | CODE |
| LOW | sdk/python/lib/pulumi/urn.py | 40 | except Exception as e: | CODE |
| MEDIUM | sdk/python/lib/pulumi/resource_hooks.py | 193 | print(f"Error for resource {args.name} of type {args.type}") | STRING |
| LOW | sdk/python/lib/pulumi/output.py | 367 | except Exception as exc: # noqa: BLE001 catch blind exception | CODE |
| MEDIUM | sdk/python/lib/pulumi/output.py | 364 | def run() -> "_OutputData[T_co]": | CODE |
| LOW | sdk/python/lib/pulumi/dynamic/__main__.py | 85 | except Exception: # noqa | CODE |
| MEDIUM | sdk/python/lib/pulumi/dynamic/__main__.py | 82 | def wrapper(self, request, context): | CODE |
| MEDIUM | sdk/python/lib/pulumi/runtime/resource.py | 598 | def do_get(): | CODE |
| MEDIUM | sdk/python/lib/pulumi/runtime/resource.py | 839 | def do_read(): | CODE |
| MEDIUM | sdk/python/lib/pulumi/runtime/resource.py | 1040 | def do_register() -> None: | CODE |
| LOW | sdk/python/lib/pulumi/runtime/resource.py | 331 | except Exception as exn: | CODE |
| LOW | sdk/python/lib/pulumi/runtime/resource.py | 632 | except Exception as exn: | CODE |
| LOW | sdk/python/lib/pulumi/runtime/resource.py | 908 | except Exception as exn: | CODE |
| LOW | sdk/python/lib/pulumi/runtime/resource.py | 1224 | except Exception as exn: | CODE |
| LOW | sdk/python/lib/pulumi/runtime/resource.py | 1302 | except Exception as exn: | CODE |
| LOW | sdk/python/lib/pulumi/runtime/stack.py | 183 | except Exception as exn: | CODE |
| LOW | sdk/python/lib/pulumi/runtime/invoke.py | 79 | except Exception as ex: # noqa: BLE001 catch blind exception | CODE |
| LOW | sdk/python/lib/pulumi/runtime/invoke.py | 187 | except Exception as exn: # noqa: BLE001 catch blind exception | CODE |
| LOW | sdk/python/lib/pulumi/runtime/invoke.py | 582 | except Exception as exn: | CODE |
| MEDIUM | sdk/python/lib/pulumi/runtime/invoke.py | 173 | def do_invoke_output() -> None: | CODE |
| MEDIUM | sdk/python/lib/pulumi/runtime/invoke.py | 450 | def do_call() -> None: | CODE |
| LOW | sdk/python/lib/pulumi/runtime/rpc_manager.py | 75 | except Exception as exn: # noqa: BLE001 catch blind exception | CODE |
| LOW | sdk/python/lib/pulumi/runtime/_callbacks.py | 138 | except Exception as e: # noqa: BLE001 catch blind exception | CODE |
| LOW | sdk/python/lib/pulumi/runtime/_callbacks.py | 436 | except Exception as e: # noqa: BLE001 catch blind exception | CODE |
| LOW | sdk/python/lib/pulumi/runtime/_callbacks.py | 523 | except Exception as e: # noqa: BLE001 catch blind exception | CODE |
| LOW | sdk/python/lib/pulumi/runtime/_callbacks.py | 551 | except Exception: | CODE |
| LOW | sdk/python/lib/pulumi/provider/server.py | 125 | except Exception as e: # noqa | CODE |
| LOW | sdk/python/lib/pulumi/provider/server.py | 362 | except Exception as e: # noqa | CODE |
| LOW | sdk/python/lib/pulumi/provider/server.py | 476 | except Exception as e: # noqa | CODE |
| LOW | sdk/python/lib/pulumi/provider/experimental/server.py | 80 | except Exception as e: # noqa | CODE |
| LOW | sdk/python/lib/pulumi/provider/experimental/server.py | 159 | except Exception as e: # noqa | CODE |
| LOW | sdk/python/lib/pulumi/provider/experimental/server.py | 314 | except Exception as e: # noqa | CODE |
| MEDIUM | sdk/python/lib/pulumi/provider/experimental/server.py | 75 | def wrapper(self, request, context): | CODE |
| LOW | sdk/python/lib/pulumi/provider/experimental/analyzer.py | 777 | except Exception: # noqa | CODE |
| LOW | …k/python/lib/pulumi/provider/experimental/component.py | 99 | except Exception as e: # noqa | CODE |
| LOW | sdk/python/lib/pulumi/automation/_stack.py | 1698 | except Exception as e: # noqa | CODE |
| LOW | sdk/python/lib/pulumi/automation/_stack.py | 1704 | except Exception as e: # noqa | CODE |
| 5 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | tests/integration/dependency_steps/step2/index.ts | 5 | // Step 2: Reverse the dependency graph. | COMMENT |
| LOW | tests/integration/dependency_steps/step1/index.ts | 5 | // Step 1: Populate our dependency graph. | COMMENT |
| LOW | tests/integration/read/import_acquire/step2/index.ts | 17 | // Step 2: the resource from the setup is imported, and is now managed by Pulumi. | COMMENT |
| LOW | tests/integration/steps/step3/index.ts | 5 | // Step 3: Replace a resource: | COMMENT |
| LOW | tests/integration/steps/step2/index.ts | 5 | // Step 2: Same, Update, Same, Delete, Create: | COMMENT |
| LOW | tests/integration/steps/step5/index.ts | 5 | // Step 5: Fail during an update: | COMMENT |
| LOW | tests/integration/steps/step6/index.ts | 3 | // Step 6: Delete everything: | COMMENT |
| LOW | tests/integration/steps/step1/index.ts | 5 | // Step 1: Populate the world: | COMMENT |
| LOW | …ses/python/alias_after_failed_update/step3/__main__.py | 13 | # Step 3: Add the alias for the unparented resource, to prevent the Create and Delete. | COMMENT |
| LOW | …ses/python/alias_after_failed_update/step2/__main__.py | 14 | # Step 2: | COMMENT |
| LOW | sdk/go/common/workspace/plugins.go | 845 | // get.pulumi.com here, we need to check if there's an override for that specific URL. | COMMENT |
| LOW | sdk/go/common/workspace/plugins.go | 2253 | // We prefer the ambient path, but we need to check if this is the same as the bundled | COMMENT |
| LOW | pkg/cmd/pulumi/install/install.go | 233 | // within a project, or vice-vera, so we need to check if there's a Pulumi.yaml in a parent | COMMENT |
| LOW | pkg/cmd/pulumi/install/install.go | 268 | // within a project, or vice-vera, so we need to check if there's a Pulumi.yaml in a parent | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 75 | // Step 1: the agent's first message is the CLI-work hand-off. is_final is | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 80 | // Step 2: session starts running the first tool. Label switches to a tool label. | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 84 | // Step 3: progress update from the tool. | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 88 | // Step 4: first tool completes; inter-tool gap shows the thinking label. | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 92 | // Step 5: agent decides to run a second tool — another hand-off arrives first. | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 102 | // Step 6: agent's truly-final message — no pending CLI work. Spinner drops. | COMMENT |
| LOW | pkg/cmd/pulumi/packageresolution/package_resolution.go | 394 | // Now that we've resolved to a version, we need to check if we have a good-enough version | COMMENT |
| LOW | pkg/backend/httpstate/client/client.go | 2084 | // Step 1: Send POST containing policy metadata to service. This begins process of creating | COMMENT |
| LOW | pkg/backend/httpstate/client/client.go | 2143 | // Step 2: Upload the compressed PolicyPack directory to the pre-signed object storage service URL. | COMMENT |
| LOW | pkg/backend/httpstate/client/client.go | 2162 | // Step 3: Signal to the service that the PolicyPack publish operation is complete. | COMMENT |
| LOW | pkg/codegen/nodejs/gen_program.go | 1549 | // Step 1: generate the apply function call: | COMMENT |
| LOW | pkg/codegen/nodejs/gen_program.go | 1565 | // Step 2: apply lambda function arguments | COMMENT |
| LOW | pkg/codegen/nodejs/gen_program.go | 1582 | // Step 3: The function body is where the resources are generated: | COMMENT |
| LOW | pkg/codegen/python/gen_program.go | 1539 | // Step 1: generate the apply function call: | COMMENT |
| LOW⚡ | pkg/codegen/python/gen_program.go | 1559 | // Step 2: apply lambda function arguments | COMMENT |
| LOW⚡ | pkg/codegen/python/gen_program.go | 1561 | // Step 3: The function body is where the resources are generated: | COMMENT |
| LOW | pkg/resource/deploy/step_generator.go | 1068 | // We need to check if this resource is trying to depend on another resource that has already been | COMMENT |
| LOW | pkg/resource/deploy/step_generator.go | 2460 | // We need to check if this resource has been refreshed because in that case it will be the | COMMENT |
| LOW | pkg/engine/update.go | 1072 | // Step 1: Install policy packs and plugins. | COMMENT |
| LOW | pkg/engine/update.go | 1099 | // Step 2: Load policy packs and plugins. | COMMENT |
| LOW⚡ | pkg/engine/lifecycletest/delete_before_replace_test.go | 1147 | // Step 0: Initial deployment - creates provA v1.1.1, resB with length=16, resA | COMMENT |
| LOW⚡ | pkg/engine/lifecycletest/delete_before_replace_test.go | 1152 | // Step 1: Update - changes provA to v1.2.1 (triggers update) and resB length=17 (triggers DBR) | COMMENT |
| LOW | pkg/engine/lifecycletest/pulumi_test.go | 3174 | // Step 1: Change BOTH A's and B's properties, both should replace | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 821 | // Step 0: the program registers the producer while the snippet waits for its reference. | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 838 | // Step 1: target-delete the producer and its dependent snippet resource. The snippet definition | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 853 | // Step 2: a normal update recreates the producer and resolves the existing snippet reference. | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 1057 | // Step 0: the program registers the producer while the snippet waits for its reference. | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 1072 | // Step 1: the program stops registering producer. Once all remaining sources are blocked, the | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 1169 | // Step 0: run the complete producer -> middle -> consumer chain side-by-side. | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 1186 | // Step 1: drop the first producer. Its old state remains at the start of the update, but snippet | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | tests/integration/dependency_steps/step2/index.ts | 5 | // Step 2: Reverse the dependency graph. | COMMENT |
| LOW | tests/integration/dependency_steps/step1/index.ts | 5 | // Step 1: Populate our dependency graph. | COMMENT |
| LOW | tests/integration/read/import_acquire/step2/index.ts | 17 | // Step 2: the resource from the setup is imported, and is now managed by Pulumi. | COMMENT |
| LOW | tests/integration/steps/step3/index.ts | 5 | // Step 3: Replace a resource: | COMMENT |
| LOW | tests/integration/steps/step2/index.ts | 5 | // Step 2: Same, Update, Same, Delete, Create: | COMMENT |
| LOW | tests/integration/steps/step5/index.ts | 5 | // Step 5: Fail during an update: | COMMENT |
| LOW | tests/integration/steps/step6/index.ts | 3 | // Step 6: Delete everything: | COMMENT |
| LOW | tests/integration/steps/step1/index.ts | 5 | // Step 1: Populate the world: | COMMENT |
| LOW | …ses/python/alias_after_failed_update/step3/__main__.py | 13 | # Step 3: Add the alias for the unparented resource, to prevent the Create and Delete. | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 75 | // Step 1: the agent's first message is the CLI-work hand-off. is_final is | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 80 | // Step 2: session starts running the first tool. Label switches to a tool label. | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 84 | // Step 3: progress update from the tool. | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 88 | // Step 4: first tool completes; inter-tool gap shows the thinking label. | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 92 | // Step 5: agent decides to run a second tool — another hand-off arrives first. | COMMENT |
| LOW⚡ | pkg/cmd/pulumi/neo/tui_busy_test.go | 102 | // Step 6: agent's truly-final message — no pending CLI work. Spinner drops. | COMMENT |
| LOW | pkg/backend/httpstate/client/client.go | 2084 | // Step 1: Send POST containing policy metadata to service. This begins process of creating | COMMENT |
| LOW | pkg/backend/httpstate/client/client.go | 2143 | // Step 2: Upload the compressed PolicyPack directory to the pre-signed object storage service URL. | COMMENT |
| LOW | pkg/backend/httpstate/client/client.go | 2162 | // Step 3: Signal to the service that the PolicyPack publish operation is complete. | COMMENT |
| LOW | pkg/codegen/nodejs/gen_program.go | 1549 | // Step 1: generate the apply function call: | COMMENT |
| LOW | pkg/codegen/nodejs/gen_program.go | 1565 | // Step 2: apply lambda function arguments | COMMENT |
| LOW | pkg/codegen/nodejs/gen_program.go | 1582 | // Step 3: The function body is where the resources are generated: | COMMENT |
| LOW | pkg/codegen/python/gen_program.go | 1539 | // Step 1: generate the apply function call: | COMMENT |
| LOW⚡ | pkg/codegen/python/gen_program.go | 1559 | // Step 2: apply lambda function arguments | COMMENT |
| LOW⚡ | pkg/codegen/python/gen_program.go | 1561 | // Step 3: The function body is where the resources are generated: | COMMENT |
| LOW | pkg/engine/update.go | 1072 | // Step 1: Install policy packs and plugins. | COMMENT |
| LOW | pkg/engine/update.go | 1099 | // Step 2: Load policy packs and plugins. | COMMENT |
| LOW⚡ | pkg/engine/lifecycletest/delete_before_replace_test.go | 1147 | // Step 0: Initial deployment - creates provA v1.1.1, resB with length=16, resA | COMMENT |
| LOW⚡ | pkg/engine/lifecycletest/delete_before_replace_test.go | 1152 | // Step 1: Update - changes provA to v1.2.1 (triggers update) and resB length=17 (triggers DBR) | COMMENT |
| LOW | pkg/engine/lifecycletest/pulumi_test.go | 3174 | // Step 1: Change BOTH A's and B's properties, both should replace | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 821 | // Step 0: the program registers the producer while the snippet waits for its reference. | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 838 | // Step 1: target-delete the producer and its dependent snippet resource. The snippet definition | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 853 | // Step 2: a normal update recreates the producer and resolves the existing snippet reference. | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 1057 | // Step 0: the program registers the producer while the snippet waits for its reference. | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 1072 | // Step 1: the program stops registering producer. Once all remaining sources are blocked, the | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 1169 | // Step 0: run the complete producer -> middle -> consumer chain side-by-side. | COMMENT |
| LOW | pkg/engine/lifecycletest/pcl_test.go | 1186 | // Step 1: drop the first producer. Its old state remains at the start of the update, but snippet | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | .github/actions/retry/index.js | 16 | // ── GitHub Actions helpers (no @actions/core dependency) ──────────────────── | COMMENT |
| MEDIUM | .github/actions/retry/index.js | 42 | // ── Minimal YAML helpers ──────────────────────────────────────────────────── | COMMENT |
| MEDIUM | .github/actions/retry/index.js | 153 | // ── Expression evaluator ──────────────────────────────────────────────────── | COMMENT |
| MEDIUM | .github/actions/retry/index.js | 171 | // ── Download & extract ────────────────────────────────────────────────────── | COMMENT |
| MEDIUM | .github/actions/retry/index.js | 215 | // ── Build the environment for the child action ────────────────────────────── | COMMENT |
| MEDIUM | .github/actions/retry/index.js | 273 | // ── Main ──────────────────────────────────────────────────────────────────── | COMMENT |
| MEDIUM | .github/actions/retry/index.js | 374 | // ── Retry loop ────────────────────────────────────────────────────── | COMMENT |
| MEDIUM | pkg/engine/lifecycletest/state_migration_test.go | 1194 | // BucketV2 (managed) ───────────┐ | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …-setuppy/python/pulumi_typedDictExample/my_function.py | 58 | def my_function(my_type: Optional[Union['MyType', 'MyTypeDict']] = None, | CODE |
| LOW | …/python/pulumi_typedDictDisabledExample/my_function.py | 53 | def my_function(my_type: Optional[pulumi.InputType['MyType']] = None, | CODE |
| LOW | …yproject/python/pulumi_typedDictExample/my_function.py | 58 | def my_function(my_type: Optional[Union['MyType', 'MyTypeDict']] = None, | CODE |
| LOW | …sc/sdks/kebab-names-52.0.0/kebab-module/doSomething.ts | 9 | export function doSomething(args: DoSomethingArgs, opts?: pulumi.InvokeOptions): Promise<DoSomethingResult> { | CODE |
| LOW | …un/sdks/kebab-names-52.0.0/kebab-module/doSomething.ts | 9 | export function doSomething(args: DoSomethingArgs, opts?: pulumi.InvokeOptions): Promise<DoSomethingResult> { | CODE |
| LOW | …de/sdks/kebab-names-52.0.0/kebab-module/doSomething.ts | 9 | export function doSomething(args: DoSomethingArgs, opts?: pulumi.InvokeOptions): Promise<DoSomethingResult> { | CODE |
| LOW | …52.0.0/pulumi_kebab_names/kebab_module/do_something.py | 47 | def do_something(nested: Optional[Union['DefaultsInput', 'DefaultsInputDict']] = None, | CODE |
| LOW | …52.0.0/pulumi_kebab_names/kebab_module/do_something.py | 47 | def do_something(nested: Optional[Union['DefaultsInput', 'DefaultsInputDict']] = None, | CODE |
| LOW | …52.0.0/pulumi_kebab_names/kebab_module/do_something.py | 47 | def do_something(nested: Optional[Union['DefaultsInput', 'DefaultsInputDict']] = None, | CODE |
| LOW | …52.0.0/pulumi_kebab_names/kebab_module/do_something.py | 47 | def do_something(nested: Optional[Union['DefaultsInput', 'DefaultsInputDict']] = None, | CODE |
| LOW | …52.0.0/pulumi_kebab_names/kebab_module/do_something.py | 42 | def do_something(nested: Optional[pulumi.InputType['DefaultsInput']] = None, | CODE |
| LOW | …52.0.0/pulumi_kebab_names/kebab_module/do_something.py | 42 | def do_something(nested: Optional[pulumi.InputType['DefaultsInput']] = None, | CODE |
| LOW⚡ | sdk/python/lib/test/provider/test_server.py | 268 | async def helper(v: Any): | CODE |
| LOW⚡ | sdk/python/lib/test/provider/test_server.py | 278 | async def helper(v: Any): | CODE |
| LOW⚡ | sdk/python/lib/test/provider/test_server.py | 287 | async def helper(v: Any): | CODE |
| LOW | sdk/python/lib/test/langhost/invoke_types/__main__.py | 21 | def my_function(first_value: str, second_value: float) -> outputs.MyFunctionResult: | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | sdk/go/common/util/otelreceiver/exporter.go | 60 | // grpcs://api.honeycomb.io:443?x-honeycomb-team=YOUR_API_KEY | COMMENT |
| HIGH | sdk/go/common/util/otelreceiver/exporter.go | 61 | // https://api.honeycomb.io?x-honeycomb-team=YOUR_API_KEY | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | tests/smoke/smoke_test.go | 112 | // Quick sanity test that `pulumi package new` can scaffold a package from a live template. | COMMENT |
| MEDIUM | tests/smoke/smoke_test.go | 1391 | // ".pulumi" directory at root, so scaffold in a subdirectory. | COMMENT |
| MEDIUM | pkg/cmd/pulumi/insights/insights_account_scan_test.go | 407 | // The scan-log scaffold lives under `scan`; verify the wiring survives the | COMMENT |
| MEDIUM | pkg/cmd/pulumi/insights/insights_account_scan_test.go | 408 | // switch from scaffold to real implementation. | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | sdk/python/lib/test/automation/test_remote_workspace.py | 127 | # Set PULUMI_ACCESS_TOKEN to an access token with access to Pulumi Deployments | COMMENT |
| LOW | sdk/python/lib/pulumi/runtime/rpc.py | 398 | # Set typ to T if it's Optional[T], Input[T], or InputType[T]. | COMMENT |
| LOW | .github/workflows/ci-dev-release.yml | 129 | # Check if we need to create a new SDK dev release | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | tests/integration/backend/diy/pgtest/pgtest.go | 20 | // Example usage: | COMMENT |
| LOW | pkg/backend/diy/postgres/doc.go | 20 | // Example usage: | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | sdk/python/lib/pulumi/resource.py | 929 | # !!! IMPORTANT !!! If you add a new attribute to this type, make sure to verify that ResourceOptions.merge | COMMENT |
| LOW | sdk/python/lib/pulumi/resource.py | 983 | # !!! IMPORTANT !!! If you add a new attribute to this type, make sure to verify that ResourceOptions.merge | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | pkg/codegen/go/gen_program_expressions.go | 691 | // TODO: implement "element", "entries", "lookup", "split" and "range" | COMMENT |