Reviving the language that brought us the Jak & Daxter Series
This report summarizes scanner evidence for open-goal/jak-project, a Common Lisp project with 3,624 GitHub stars. SynthScan examined 4,404,731 lines of code across 10734 source files, recording 7170 pattern matches distributed across 26 syntactic categories. The legacy adjusted pattern signal is 1.5 (Low pattern signal); it is not an authorship estimate.
Use the findings to ask whether maintainers can explain intent, verify dependencies, simplify unnecessary scaffolding, and focus review effort. Risk Payload v1 adds ownership, supply-chain, over-engineering, and review-effort vectors when available. These are prompts for human verification, not probabilities, security findings, or measured maintenance costs.
Use each vector to guide manual verification of the underlying findings.
Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.
Can maintainers explain intent, assumptions, and trade-offs? 6696 finding(s).
Are imports declared and package/API names verified? 320 finding(s).
Are wrappers, guards, and repeated structures necessary? 296 finding(s).
Which changes need focused human review? 7170 finding(s).
This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.
Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.
This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.
The scanner identified 7170 distinct pattern matches across 26 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.
Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | tools/asm_branch_permuter/main.cpp | 1 | #include <algorithm> | COMMENT |
| LOW | tools/asm_branch_permuter/main.cpp | 21 | #include "decompiler/Function/BasicBlocks.h" | COMMENT |
| LOW | tools/memory_dump_tool/main.cpp | 1 | #include <fstream> | COMMENT |
| LOW | tools/field_access_searcher/main.cpp | 1 | #include <algorithm> | COMMENT |
| LOW | tools/shared/isolated_map.cpp | 1 | #include "tools/shared/isolated_map.h" | COMMENT |
| LOW | tools/formatter/main.cpp | 1 | // Iterates through the `all-types` DTS to find types that meet a variety of criteria, such as: | COMMENT |
| LOW | tools/method_call_searcher/main.cpp | 1 | #include <algorithm> | COMMENT |
| LOW | tools/type_searcher/main.cpp | 1 | // Iterates through the `all-types` DTS to find types that meet a variety of criteria, such as: | COMMENT |
| LOW | test/test_goal_trampolines_arm64.cpp | 1 | #include <array> | COMMENT |
| LOW | test/test_kernel_jak1.cpp | 1 | #include <string> | COMMENT |
| LOW | test/test_main.cpp | 1 | COMMENT | |
| LOW | test/test_emitter_arm64_alu.cpp | 1 | #include <cmath> | COMMENT |
| LOW | test/test_emitter_arm64.cpp | 1 | #include <algorithm> | COMMENT |
| LOW | test/test_emitter_arm64.cpp | 2881 | COMMENT | |
| LOW | test/test_emitter_arm64.cpp | 2901 | // // TODO - int32 max is not supported in current arm64 impl because | COMMENT |
| LOW | test/test_emitter_arm64.cpp | 3881 | // for (int r1 = 0; r1 < 16; r1++) { | COMMENT |
| LOW | test/test_emitter_arm64.cpp | 3901 | // tester.emit(IGen::movd_gpr32_f32(tester.generator(), r2, V0 + r4)); | COMMENT |
| LOW | test/test_common_util.cpp | 1 | #include <limits> | COMMENT |
| LOW | test/decompiler/test_VuDisasm.cpp | 41 | // VuData(const std::string& name, VuDisassembler::VuKind kind) | COMMENT |
| LOW | test/decompiler/test_VuDisasm.cpp | 221 | TEST(VuDisasm, ForegroundVu0_JakX) { | COMMENT |
| LOW | test/decompiler/test_VuDisasm.cpp | 241 | // auto path = file_util::get_file_path({"test/decompiler/vu_reference/jak3"}); | COMMENT |
| LOW | test/decompiler/test_VuDisasm.cpp | 441 | // std::string disasm; | COMMENT |
| LOW | test/decompiler/FormRegressionTest.cpp | 1 | #include "FormRegressionTest.h" | COMMENT |
| LOW | test/decompiler/FormRegressionTest.cpp | 241 | rewrite_inline_asm_instructions(test->func.ir2.top_form, *test->func.ir2.form_pool, | COMMENT |
| LOW | test/goalc/test_variables.cpp | 121 | shared_compiler->runner.run_static_test(testCategory, "deref-simple.static.gc", | COMMENT |
| LOW | test/goalc/test_variables.cpp | 141 | // // todo, finish format testing. | COMMENT |
| LOW | test/goalc/test_with_game.cpp | 1 | #include <cstdio> | COMMENT |
| LOW | test/goalc/test_arithmetic.cpp | 1 | #include <chrono> | COMMENT |
| LOW | test/goalc/test_arithmetic.cpp | 21 | // I've heavily annotated it with comments and links to docs to help | COMMENT |
| LOW | test/offline/offline_test_main.cpp | 1 | #include <future> | COMMENT |
| LOW | test/offline/framework/orchestration.cpp | 1 | #include "orchestration.h" | COMMENT |
| LOW | custom_assets/blender_plugins/gltf2_blender_extract.py | 101 | # data, so we need to split Blender verts up into potentially-multiple glTF | COMMENT |
| LOW | custom_assets/blender_plugins/gltf2_blender_extract.py | 541 | # somehow the colors from blender are > 1.0 sometimes, so clamp here. | COMMENT |
| LOW | lsp/main.cpp | 1 | // clang-format off | COMMENT |
| LOW | lsp/protocol/common_types.h | 81 | COMMENT | |
| LOW | lsp/protocol/formatting.h | 1 | #pragma once | COMMENT |
| LOW | lsp/protocol/completion.h | 81 | struct CompletionItem { | COMMENT |
| LOW | lsp/protocol/completion.h | 101 | /// TODO - can also be MarkupContent | COMMENT |
| LOW | lsp/protocol/completion.h | 121 | /// VS Code when code complete is requested in this example | COMMENT |
| LOW | lsp/protocol/completion.h | 141 | /// An edit which is applied to a document when selecting this completion. | COMMENT |
| LOW | lsp/protocol/completion.h | 161 | /// | COMMENT |
| LOW | lsp/protocol/completion.h | 181 | /// current cursor position (for example adding an import statement at the | COMMENT |
| LOW | lsp/protocol/type_hierarchy.h | 21 | /// More detail for this item, e.g. the signature of a function. | COMMENT |
| LOW | lsp/protocol/progress_report.h | 21 | // Controls if a cancel button should show to allow the user to cancel the | COMMENT |
| LOW | lsp/protocol/progress_report.h | 41 | COMMENT | |
| LOW | lsp/state/workspace.cpp | 1 | #include "workspace.h" | COMMENT |
| LOW | lsp/state/workspace.h | 1 | #pragma once | COMMENT |
| LOW | lsp/handlers/lsp_router.cpp | 1 | #include "lsp_router.h" | COMMENT |
| LOW | lsp/handlers/text_document/hover.h | 1 | #pragma once | COMMENT |
| LOW | game/runtime.cpp | 1 | /*! | COMMENT |
| LOW | game/runtime.cpp | 21 | #include <Windows.h> | COMMENT |
| LOW | game/runtime.cpp | 41 | #include "game/kernel/common/klink.h" | COMMENT |
| LOW | game/runtime.cpp | 61 | #include "game/overlord/common/fake_iso.h" | COMMENT |
| LOW | game/runtime.cpp | 81 | #include "game/overlord/jak2/stream.h" | COMMENT |
| LOW | game/main.cpp | 1 | /*! | COMMENT |
| LOW | game/tools/subtitle_editor/subtitle_editor.cpp | 1 | #include "subtitle_editor.h" | COMMENT |
| LOW | game/overlord/jakx/iso.cpp | 1 | #include "iso.h" | COMMENT |
| LOW | game/overlord/jakx/dvd_driver.cpp | 41 | return m_ret; | COMMENT |
| LOW | game/overlord/jakx/dvd_driver.cpp | 141 | COMMENT | |
| LOW | game/overlord/jakx/dvd_driver.cpp | 541 | // if ((((driver->locked != false)) || | COMMENT |
| 6156 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | custom_assets/blender_plugins/opengoal.py | 12 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 13 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 15 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 15 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 15 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 15 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 15 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 23 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 23 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 23 | CODE | |
| LOW | custom_assets/blender_plugins/opengoal.py | 23 | CODE | |
| LOW | decompiler/gui/decompiler_gui.py | 2 | CODE | |
| LOW | scripts/setup_art_group_imports.py | 6 | CODE | |
| LOW | scripts/analyze_korean.py | 24 | CODE | |
| LOW | scripts/gsrc/format-gsrc-file.py | 13 | CODE | |
| LOW | scripts/gsrc/format-gsrc-file.py | 15 | CODE | |
| LOW | scripts/gsrc/format-gsrc-file.py | 15 | CODE | |
| LOW | scripts/gsrc/add-missing-requires.py | 3 | CODE | |
| LOW | scripts/gsrc/add-missing-requires.py | 9 | CODE | |
| LOW | scripts/gsrc/iteratively-copy-decomp.py | 4 | CODE | |
| LOW | scripts/gsrc/lint-gsrc-file.py | 4 | CODE | |
| LOW | scripts/gsrc/jak1-sprite-adjustments.py | 2 | CODE | |
| LOW | scripts/gsrc/update-refs-from-decomp-plan.py | 4 | CODE | |
| LOW | scripts/gsrc/update-refs-from-decomp-plan.py | 4 | CODE | |
| LOW | scripts/gsrc/update-refs-from-decomp-plan.py | 5 | CODE | |
| LOW | scripts/gsrc/format-gsrc-folder.py | 5 | CODE | |
| LOW | scripts/gsrc/format-gsrc-folder.py | 5 | CODE | |
| LOW | …ts/gsrc/skeleton_creation/make_empty_obj_files_jakx.py | 3 | CODE | |
| LOW | scripts/ci/lint-trailing-whitespace.py | 2 | CODE | |
| LOW | …ter/tree-sitter/cli/src/generate/templates/__init__.py | 3 | CODE | |
| LOW | third-party/fmt/support/release.py | 12 | CODE | |
| LOW | third-party/fmt/support/release.py | 13 | CODE | |
| LOW | third-party/fmt/support/release.py | 14 | CODE | |
| LOW | third-party/run-clang-tidy/run-clang-tidy.py | 38 | CODE | |
| LOW | third-party/curl/tests/negtelnetserver.py | 26 | CODE | |
| LOW | third-party/curl/tests/negtelnetserver.py | 26 | CODE | |
| LOW | third-party/curl/tests/negtelnetserver.py | 26 | CODE | |
| LOW | third-party/curl/tests/negtelnetserver.py | 26 | CODE | |
| LOW | third-party/curl/tests/dictserver.py | 29 | CODE | |
| LOW | third-party/curl/tests/dictserver.py | 29 | CODE | |
| LOW | third-party/curl/tests/dictserver.py | 29 | CODE | |
| LOW | third-party/curl/tests/dictserver.py | 29 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 33 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 33 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 33 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 35 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 36 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 36 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 37 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 38 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 39 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 40 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 41 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 42 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 42 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 42 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 43 | CODE | |
| LOW | third-party/curl/tests/http/testenv/__init__.py | 44 | CODE | |
| LOW | third-party/capstone/contrib/objdump/objdump-m68k.py | 5 | CODE | |
| LOW | third-party/capstone/contrib/objdump/objdump-m68k.py | 6 | CODE | |
| 228 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | test-script.py | 17 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 19 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 35 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 37 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 55 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 57 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 156 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 158 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 229 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 231 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 377 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 379 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 416 | # ============================================================================ | COMMENT |
| MEDIUM | test-script.py | 418 | # ============================================================================ | COMMENT |
| MEDIUM | third-party/fmt/test/gtest/CMakeLists.txt | 1 | #------------------------------------------------------------------------------ | COMMENT |
| MEDIUM | third-party/curl/projects/vms/make_gnv_curl_install.sh | 24 | #========================================================================== | COMMENT |
| MEDIUM | third-party/curl/projects/vms/gnv_curl_configure.sh | 22 | #========================================================================== | COMMENT |
| MEDIUM⚡ | third-party/curl/tests/ftpserver.pl | 2946 | #---------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | third-party/curl/tests/ftpserver.pl | 2947 | #---------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | third-party/curl/tests/ftpserver.pl | 2949 | #---------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | third-party/curl/tests/ftpserver.pl | 2950 | #---------------------------------------------------------------------- | COMMENT |
| MEDIUM | third-party/curl/scripts/checksrc.pl | 628 | # ------------------------------------------------------------ | COMMENT |
| MEDIUM | third-party/curl/scripts/checksrc.pl | 631 | # ------------------------------------------------------------ | COMMENT |
| MEDIUM | third-party/curl/scripts/checksrc.pl | 657 | # ------------------------------------------------------------ | COMMENT |
| MEDIUM | third-party/curl/scripts/checksrc.pl | 660 | # ------------------------------------------------------------ | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1106 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1110 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1224 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1227 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1285 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1288 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1346 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1349 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1362 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1365 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1378 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1394 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1513 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1516 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1821 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/m68k.yaml | 1824 | # ========================================================================== | COMMENT |
| MEDIUM | third-party/capstone/tests/details/riscv.yaml | 5214 | # ================================================================================================== | COMMENT |
| MEDIUM⚡ | third-party/capstone/tests/details/riscv.yaml | 5228 | # ================================================================================================== | COMMENT |
| MEDIUM⚡ | third-party/capstone/tests/details/riscv.yaml | 5230 | # -------------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | third-party/capstone/tests/details/riscv.yaml | 5233 | # -------------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | third-party/capstone/tests/details/riscv.yaml | 5453 | # -------------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | third-party/capstone/tests/details/riscv.yaml | 5456 | # -------------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | third-party/capstone/tests/details/riscv.yaml | 5724 | # -------------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | third-party/capstone/tests/details/riscv.yaml | 5728 | # -------------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | third-party/capstone/tests/details/riscv.yaml | 6046 | # -------------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | third-party/capstone/tests/details/riscv.yaml | 6049 | # -------------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …sync/Tests/MCUpdaterTests/Disassembler/ARCH/test_a.txt | 4 | #------------------------------------------------------------------------------ | COMMENT |
| MEDIUM | …sync/Tests/MCUpdaterTests/Disassembler/ARCH/test_a.txt | 6 | #------------------------------------------------------------------------------ | COMMENT |
| MEDIUM | …/auto-sync/src/autosync/cpptranslator/CppTranslator.py | 142 | AddOperand.__name__: 1, # ────────┘ The ones left are fixed with the `AddOperand` patch. | CODE |
| MEDIUM⚡ | …/auto-sync/src/autosync/cpptranslator/CppTranslator.py | 156 | Assert.__name__: 0, # ◁─────────┐ The llvm_unreachable calls are replaced with asserts. | CODE |
| MEDIUM⚡ | …/auto-sync/src/autosync/cpptranslator/CppTranslator.py | 163 | OutStreamParam.__name__: 0, # ◁──────┐ add_cs_detail() is added to printOperand functions with a certain | CODE |
| MEDIUM⚡ | …/auto-sync/src/autosync/cpptranslator/CppTranslator.py | 166 | AddCSDetail.__name__: 1, # ──────────┘ | CODE |
| MEDIUM⚡ | …/auto-sync/src/autosync/cpptranslator/CppTranslator.py | 167 | NamespaceAnon.__name__: 0, # ◁─────┐ "llvm" and anonymous namespaces must be removed first, | CODE |
| MEDIUM⚡ | …/auto-sync/src/autosync/cpptranslator/CppTranslator.py | 168 | NamespaceLLVM.__name__: 0, # ◁─────┤ so they don't match in NamespaceArch. | CODE |
| MEDIUM⚡ | …/auto-sync/src/autosync/cpptranslator/CppTranslator.py | 169 | NamespaceArch.__name__: 1, # ──────┘ | CODE |
| 6 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | test-script.py | 92 | CODE | |
| LOW | custom_assets/blender_plugins/gltf2_blender_extract.py | 16 | CODE | |
| LOW | custom_assets/blender_plugins/gltf2_blender_extract.py | 561 | CODE | |
| LOW | goal_src/jak2/tools/db-fixtures/data/convert-to-sql.py | 34 | CODE | |
| LOW | scripts/analyze_korean.py | 508 | CODE | |
| LOW | scripts/gsrc/format-gsrc-file.py | 19 | CODE | |
| LOW | scripts/gsrc/iteratively-copy-decomp.py | 95 | CODE | |
| LOW | scripts/gsrc/compare-compilation-outputs.py | 29 | CODE | |
| LOW | scripts/gsrc/code_retention/all_types_retention.py | 22 | CODE | |
| LOW | scripts/gsrc/code_retention/all_types_retention.py | 50 | CODE | |
| LOW | scripts/gsrc/code_retention/code_retention.py | 13 | CODE | |
| LOW | …ipts/gsrc/skeleton_creation/init_folder_struct_jakx.py | 382 | CODE | |
| LOW | scripts/ci/lint-characters.py | 228 | CODE | |
| LOW | scripts/ci/lint-characters.py | 265 | CODE | |
| LOW | scripts/ci/lint-autoglottonyms.py | 71 | CODE | |
| LOW | scripts/ci/docs/append-file-docs.py | 4 | CODE | |
| LOW | third-party/fmt/support/docopt.py | 72 | CODE | |
| LOW | third-party/fmt/support/docopt.py | 301 | CODE | |
| LOW | third-party/fmt/support/docopt.py | 334 | CODE | |
| LOW | third-party/fmt/support/docopt.py | 402 | CODE | |
| LOW | third-party/fmt/support/docopt.py | 428 | CODE | |
| LOW | third-party/fmt/support/docopt.py | 57 | CODE | |
| LOW | third-party/fmt/support/printable.py | 133 | CODE | |
| LOW | …t/support/python/mkdocstrings_handlers/cxx/__init__.py | 261 | CODE | |
| LOW | third-party/curl/tests/negtelnetserver.py | 128 | CODE | |
| LOW | third-party/curl/tests/negtelnetserver.py | 173 | CODE | |
| LOW | third-party/curl/tests/http/conftest.py | 42 | CODE | |
| LOW | third-party/curl/tests/http/test_02_download.py | 694 | CODE | |
| LOW | third-party/curl/tests/http/test_17_ssl_use.py | 241 | CODE | |
| LOW | third-party/curl/tests/http/scorecard.py | 742 | CODE | |
| LOW | third-party/curl/tests/http/scorecard.py | 145 | CODE | |
| LOW | third-party/curl/tests/http/scorecard.py | 189 | CODE | |
| LOW | third-party/curl/tests/http/scorecard.py | 231 | CODE | |
| LOW | third-party/curl/tests/http/scorecard.py | 288 | CODE | |
| LOW | third-party/curl/tests/http/scorecard.py | 609 | CODE | |
| LOW | third-party/curl/tests/http/scorecard.py | 672 | CODE | |
| LOW | third-party/curl/tests/http/test_20_websockets.py | 228 | CODE | |
| LOW | third-party/curl/tests/http/test_20_websockets.py | 232 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 191 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 216 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 404 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 1009 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 1103 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 1171 | CODE | |
| LOW | third-party/curl/tests/http/testenv/env.py | 99 | CODE | |
| LOW | third-party/curl/tests/http/testenv/sshd.py | 117 | CODE | |
| LOW | third-party/capstone/contrib/objdump/objdump-m68k.py | 302 | CODE | |
| LOW | third-party/capstone/suite/test_corpus3.py | 10 | CODE | |
| LOW | …capstone/suite/auto-sync/src/autosync/HeaderPatcher.py | 107 | CODE | |
| LOW | …capstone/suite/auto-sync/src/autosync/HeaderPatcher.py | 253 | CODE | |
| LOW | …capstone/suite/auto-sync/src/autosync/HeaderPatcher.py | 320 | CODE | |
| LOW | …-party/capstone/suite/auto-sync/src/autosync/Helper.py | 17 | CODE | |
| LOW | …apstone/suite/auto-sync/src/autosync/PathVarHandler.py | 22 | CODE | |
| LOW | …/capstone/suite/auto-sync/src/autosync/IncGenerator.py | 86 | CODE | |
| LOW | …e/suite/auto-sync/src/autosync/cpptranslator/Differ.py | 386 | CODE | |
| LOW | …e/suite/auto-sync/src/autosync/cpptranslator/Differ.py | 429 | CODE | |
| LOW | …e/suite/auto-sync/src/autosync/cpptranslator/Differ.py | 468 | CODE | |
| LOW | …e/suite/auto-sync/src/autosync/cpptranslator/Differ.py | 544 | CODE | |
| LOW | …e/suite/auto-sync/src/autosync/cpptranslator/Differ.py | 804 | CODE | |
| LOW | …/auto-sync/src/autosync/cpptranslator/CppTranslator.py | 421 | CODE | |
| 66 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | test/offline/framework/orchestration.cpp | 101 | // TODO - additionally, if we have more threads than we can actually utilize we should not | COMMENT |
| MEDIUM | decompiler/types2/ForwardProp.cpp | 453 | // note: we could be a bit more robust with this detection... | COMMENT |
| MEDIUM | goalc/compiler/compilation/Atoms.cpp | 489 | // TODO - these file checks are gross, replace with something more robust long-term | COMMENT |
| MEDIUM | third-party/fmt/test/gtest/gtest/gtest.h | 7407 | // This implementation is *not* meant to be as highly tuned or robust | COMMENT |
| MEDIUM | third-party/fmt/test/gtest/gtest/gtest.h | 7478 | // In practice, this can be used to test functions that utilize the | COMMENT |
| MEDIUM | third-party/fmt/include/fmt/format.h | 3207 | // Compilers are not aware of how to leverage the maximum value of | COMMENT |
| MEDIUM | third-party/imgui/imgui.cpp | 6621 | // FIXME: Essentially we want to restrict manual resizing to WindowMinSize+Decoration, and allow api resizing to be | COMMENT |
| MEDIUM | third-party/imgui/imgui.cpp | 8973 | // FIXME-NEWATLAS-V2: perhaps we can now leverage ImFontAtlasUpdateDrawListsTextures() ? | COMMENT |
| MEDIUM | third-party/curl/tests/runner.pm | 1102 | # Test harness ssh server does not have this synchronization mechanism, | COMMENT |
| MEDIUM | third-party/curl/tests/serverhelp.pm | 70 | # For convenience, test harness uses 'https' and 'httptls' literals as | COMMENT |
| MEDIUM | third-party/curl/tests/globalconfig.pm | 26 | # harness but not really "owned" by any one. | COMMENT |
| MEDIUM | third-party/curl/tests/servers.pm | 1015 | # For convenience, test harness uses 'https' and 'httptls' literals | COMMENT |
| MEDIUM | third-party/curl/tests/devtest.pl | 27 | # runtests.pl harness. Do not try to use this unless you know what you are | COMMENT |
| MEDIUM | third-party/curl/tests/devtest.pl | 119 | # Initialize the test harness to run tests | COMMENT |
| MEDIUM | third-party/curl/tests/secureserver.pl | 27 | # harness. Actually a layer that runs stunnel properly using the | COMMENT |
| MEDIUM | third-party/curl/tests/secureserver.pl | 28 | # non-secure test harness servers. | COMMENT |
| MEDIUM | third-party/curl/tests/sshserver.pl | 26 | # Starts sshd for use in the SCP and SFTP curl test harness tests. | COMMENT |
| MEDIUM | third-party/curl/tests/testcurl.pl | 753 | # build test harness programs for selected cross-compiles | COMMENT |
| MEDIUM | third-party/curl/tests/runtests.pl | 29 | # are able to run curl but are unable to run the test harness. | COMMENT |
| MEDIUM⚡ | third-party/curl/tests/runtests.pl | 743 | # Test harness currently uses a non-stunnel server in order to | COMMENT |
| MEDIUM⚡ | third-party/curl/tests/runtests.pl | 746 | # 'httptls' may be included in the test harness protocols array | COMMENT |
| MEDIUM⚡ | third-party/curl/tests/runtests.pl | 748 | # harness server. | COMMENT |
| LOW | third-party/capstone/contrib/objdump/objdump-m68k.py | 200 | # It's ok to just use PCMI here as is as we set base_reg to PC in the disassembler. | COMMENT |
| LOW | …c/src/autosync/cpptranslator/patches/FieldFromInstr.py | 51 | # If function just return fieldFromInstruction(...) | COMMENT |
| LOW | …c/src/autosync/cpptranslator/patches/FieldFromInstr.py | 77 | # Here we just create a function with the postfix fieldFromInstruction_w (for width). | COMMENT |
| LOW | …-party/capstone/bindings/python/tests/test_skipdata.py | 40 | # Default "data" instruction's name is ".byte". To rename it to "db", just use | COMMENT |
| MEDIUM | …oject/app/src/main/java/org/libsdl/app/SDLSurface.java | 278 | // if we are. We'll leverage our existing mouse motion listener | COMMENT |
| LOW | third-party/SDL/include/SDL3/SDL_main_impl.h | 134 | #else /* platforms that use a standard main() and just call SDL_RunApp(), like iOS and 3DS */ | COMMENT |
| MEDIUM | third-party/SDL/examples/template.html | 266 | // application robust, you may want to override this behavior before shipping! | COMMENT |
| LOW⚡ | third-party/SDL/build-scripts/wikiheaders.pl | 356 | # So something like "just call `SDL_Whatever`" will become | COMMENT |
| LOW⚡ | third-party/SDL/build-scripts/wikiheaders.pl | 357 | # "just call [`SDL_Whatever`](SDL_Whatever)", but | COMMENT |
| LOW⚡ | third-party/SDL/build-scripts/wikiheaders.pl | 358 | # "just call `SDL_Whatever(7)`" will not. It's just the safest | COMMENT |
| MEDIUM | third-party/SDL/src/video/SDL_blit_1.c | 540 | case SDL_COPY_COLORKEY | SDL_COPY_BLEND: // this is not super-robust but handles a specific case we found sdl12-com | CODE |
| MEDIUM | third-party/SDL/src/video/windows/SDL_windowsvideo.h | 94 | // More-robust display information in Vista... | COMMENT |
| LOW | third-party/SDL/src/hidapi/testgui/copy_to_bundle.sh | 84 | # necessary. If ../libtool not available, just use cp to do the copy, but | COMMENT |
| MEDIUM | third-party/SDL/src/joystick/SDL_gamepad.c | 1471 | // We'll pick up a robust mapping in VIRTUAL_JoystickGetGamepadMapping | COMMENT |
| MEDIUM | …rty/SDL/src/joystick/hidapi/steam/controller_structs.h | 157 | // Triton and derivatives utilize output reports for haptic commands. This is a | COMMENT |
| MEDIUM | third-party/SDL/src/events/SDL_pen_c.h | 62 | // Note that name and info are copied but currently unused; this is placeholder for a potentially more robust API later. | COMMENT |
| MEDIUM | …googletest/googletest/include/gtest/gtest-death-test.h | 152 | // This implementation is *not* meant to be as highly tuned or robust | COMMENT |
| MEDIUM | …googletest/googletest/include/gtest/gtest-death-test.h | 222 | // In practice, this can be used to test functions that utilize the | COMMENT |
| LOW | third-party/gtest-parallel/gtest_parallel.py | 52 | # Before a SIGINT is seen, wait(p) will simply call p.wait() and | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | game/graphics/opengl_renderer/VisDataHandler.h | 9 | class VisDataHandler : public BucketRenderer { | CODE |
| LOW | decompiler/gui/decompiler_gui.py | 318 | def handle_search_result_click(self, val): | CODE |
| LOW | decompiler/gui/decompiler_gui.py | 323 | def handle_search_result_double_click(self, val): | CODE |
| LOW | scripts/analyze_korean.py | 508 | def derive_syllable_block_info(glyph_list): | CODE |
| LOW | scripts/gsrc/utils.py | 42 | def get_gsrc_path_from_filename(game_name, file_name): | CODE |
| LOW | scripts/gsrc/utils.py | 58 | def get_alltypes_path_from_game(game_name): | CODE |
| LOW | scripts/gsrc/utils.py | 62 | def get_ref_path_from_filename(game_name, file_name, ref_folder): | CODE |
| LOW⚡ | scripts/gsrc/code_retention/all_types_retention.py | 14 | def update_alltypes_named_blocks(game_name): | CODE |
| LOW | third-party/replxx/tests.py | 663 | def test_completion_shorter_result( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 753 | def test_double_tab_completion( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 769 | def test_beep_on_ambiguous_completion( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 785 | def test_history_search_backward( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 831 | def test_history_search_forward( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 908 | def test_history_search_backward_position( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 927 | def test_history_search_overlong_line( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 945 | def test_history_prefix_search_backward( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 960 | def test_history_prefix_search_backward_position( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 1117 | def test_history_recall_most_recent( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 1127 | def test_history_abort_incremental_history_search_position( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 1237 | def test_kill_to_beginning_of_line( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 1293 | def test_kill_prev_word_to_white_space( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 1432 | def test_tab_completion_cutoff( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 1594 | def test_word_break_characters( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 1652 | def test_backspace_long_line_on_small_term( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 1685 | def test_reverse_history_search_on_max_match( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 1814 | def test_async_emulate_key_press( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 2133 | def test_move_up_in_multiline( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 2191 | def test_move_down_in_multiline( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 2249 | def test_go_to_beginning_of_multiline_entry( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 2265 | def test_go_to_end_of_multiline_entry( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 2284 | def test_move_to_beginning_of_line_in_multiline( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 2336 | def test_move_to_end_of_line_in_multiline( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 2969 | def test_prompt_from_callback( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3040 | def test_bold_and_underline_attributes( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3063 | def test_kill_to_begining_of_line_in_multiline( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3089 | def test_kill_to_end_of_line_in_multiline( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3115 | def test_long_prompt_multiline_enabled_hints( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3130 | def test_ignore_case_hints_completions( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3171 | def test_ignore_case_history_search( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3239 | def test_move_up_over_multiline( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3249 | def test_move_down_over_multiline( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3262 | def test_position_tracking_no_color( self_ ): | CODE |
| LOW | third-party/replxx/tests.py | 3268 | def test_seeded_incremental_history_search( self_ ): | CODE |
| LOW | …-party/fmt/doc-html/assets/javascripts/lunr/wordcut.js | 5137 | function createPredicateIndexFinder(dir) { | CODE |
| LOW | third-party/draco/src/draco/tools/install_test/test.py | 86 | def cmake_get_available_generators(): | CODE |
| LOW | third-party/draco/src/draco/tools/install_test/test.py | 125 | def run_process_and_capture_output(cmd, env=None): | CODE |
| LOW | third-party/draco/src/draco/tools/install_test/test.py | 166 | def create_output_directories(): | CODE |
| LOW | third-party/draco/src/draco/tools/install_test/test.py | 260 | def build_and_install_transcoder_dependencies(): | CODE |
| LOW | third-party/run-clang-tidy/run-clang-tidy.py | 61 | def find_compilation_database(path): | CODE |
| LOW | third-party/run-clang-tidy/run-clang-tidy.py | 135 | def check_clang_apply_replacements_binary(args): | CODE |
| LOW | third-party/curl/tests/http/testenv/env.py | 540 | def curl_lib_version_at_least(libname: str, min_version) -> bool: | CODE |
| LOW | …capstone/suite/auto-sync/src/autosync/HeaderPatcher.py | 176 | def patch_riscv_compat_macros(header: Path) -> bool: | CODE |
| LOW | …-party/capstone/suite/auto-sync/src/autosync/Helper.py | 162 | def test_only_overwrite_path_var(var_name: str, new_path: Path): | CODE |
| LOW | …rty/capstone/suite/auto-sync/src/autosync/MCUpdater.py | 101 | def get_legacy_mc_test_triple(self): | CODE |
| LOW | …rty/capstone/suite/auto-sync/src/autosync/MCUpdater.py | 241 | def get_fuzz_test_file_content(self, only_tests: bool) -> str: | CODE |
| LOW | …e/suite/auto-sync/src/autosync/Tests/test_mcupdater.py | 92 | def multi_mode_unified_test_cases(self): | CODE |
| LOW | …e/suite/auto-sync/src/autosync/Tests/test_mcupdater.py | 118 | def multi_mode_separated_test_cases(self): | CODE |
| LOW | …e/suite/auto-sync/src/autosync/cpptranslator/Differ.py | 65 | def get_coordinates_from_node(node: Node): | CODE |
| LOW | …e/suite/auto-sync/src/autosync/cpptranslator/Differ.py | 697 | def determine_patch_coordinates( | CODE |
| LOW | …/auto-sync/src/autosync/cpptranslator/CppTranslator.py | 471 | def collect_template_instances(self): | CODE |
| 56 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | third-party/curl/tests/http/test_20_websockets.py | 266 | except OSError: | CODE |
| HIGH | third-party/curl/tests/http/test_05_errors.py | 199 | except Exception: | CODE |
| HIGH | third-party/curl/tests/http/testenv/curl.py | 91 | except psutil.NoSuchProcess: | CODE |
| HIGH | third-party/curl/tests/http/testenv/curl.py | 290 | except (json.JSONDecodeError, TypeError, ValueError): | CODE |
| HIGH | third-party/curl/tests/http/testenv/curl.py | 241 | except subprocess.TimeoutExpired: | CODE |
| HIGH | third-party/curl/tests/http/testenv/ws_echo_server.py | 39 | except ConnectionClosedError: | CODE |
| HIGH | third-party/capstone/bindings/python/setup.py | 81 | except (IOError, OSError): | CODE |
| HIGH | …rd-party/capstone/bindings/python/capstone/__init__.py | 1855 | except: | CODE |
| HIGH | …rd-party/capstone/bindings/python/capstone/__init__.py | 1523 | except: | CODE |
| HIGH | …rd-party/capstone/bindings/python/capstone/__init__.py | 1554 | except: # _cs might be pulled from under our feet | CODE |
| HIGH | third-party/SDL/build-scripts/build-release.py | 46 | except ValueError: | CODE |
| HIGH | third-party/SDL/build-scripts/build-release.py | 54 | except ValueError: | CODE |
| HIGH | third-party/run-clang-format/run-clang-format.py | 333 | except AttributeError: | CODE |
| HIGH | …/googletest/googletest/test/gtest_xml_outfiles_test.py | 89 | except os.error: | CODE |
| HIGH | …/googletest/googletest/test/gtest_xml_outfiles_test.py | 93 | except os.error: | CODE |
| HIGH | …/googletest/googletest/test/gtest_xml_outfiles_test.py | 97 | except os.error: | CODE |
| HIGH | …ogletest/googletest/test/googletest-filter-unittest.py | 47 | except ImportError: | CODE |
| HIGH | …etest/googletest/test/googletest-json-outfiles-test.py | 148 | except os.error: | CODE |
| HIGH | …etest/googletest/test/googletest-json-outfiles-test.py | 152 | except os.error: | CODE |
| HIGH | …etest/googletest/test/googletest-json-outfiles-test.py | 156 | except os.error: | CODE |
| HIGH | third-party/gtest-parallel/gtest_parallel.py | 586 | except IOError: | CODE |
| HIGH | third-party/gtest-parallel/gtest_parallel.py | 76 | except OSError: | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | decompiler/scripts/create_dgo_name_list.py | 7 | # Create a dgo_names = ["...."] json config entry text for a folder of DGOs. | COMMENT |
| MEDIUM | third-party/fmt/doc-html/get-started.html | 638 | <pre class="highlight"><code>mkdir build # Create a directory to hold the build output. | CODE |
| MEDIUM⚡ | third-party/fmt/doc-html/search/search_index.json | 1 | {"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"index.html","title" | CODE |
| MEDIUM | third-party/fmt/support/release.py | 159 | # Create a release on GitHub. | COMMENT |
| MEDIUM | third-party/run-clang-tidy/run-clang-tidy.py | 7 | # This file is distributed under the University of Illinois Open Source | COMMENT |
| MEDIUM | third-party/curl/projects/OS400/makefile.sh | 50 | # Create the OS/400 library if it does not exist. | COMMENT |
| MEDIUM | third-party/curl/projects/OS400/makefile.sh | 58 | # Create the DOCS source file if it does not exist. | COMMENT |
| MEDIUM | third-party/curl/projects/OS400/makefile.sh | 88 | # Create the RPGXAMPLES source file if it does not exist. | COMMENT |
| MEDIUM | third-party/curl/projects/OS400/make-src.sh | 89 | # Create the IFS command. | COMMENT |
| MEDIUM | third-party/curl/projects/OS400/make-src.sh | 101 | # Create the CL interface program. | COMMENT |
| MEDIUM | third-party/curl/projects/OS400/make-src.sh | 112 | # Create the CL command. | COMMENT |
| MEDIUM | third-party/curl/projects/OS400/make-include.sh | 34 | # Create the OS/400 source program file for the header files. | COMMENT |
| MEDIUM | third-party/curl/projects/OS400/make-include.sh | 45 | # Create the IFS directory for the header files. | COMMENT |
| MEDIUM | third-party/curl/projects/OS400/make-lib.sh | 120 | # Create the service program exportation file in DB2 member if needed. | COMMENT |
| MEDIUM | third-party/curl/tests/runner.pm | 25 | # This module contains entry points to run a single test. runner_init | COMMENT |
| MEDIUM | third-party/curl/tests/runner.pm | 188 | # Create a separate process in multiprocess mode | COMMENT |
| MEDIUM | third-party/curl/tests/globalconfig.pm | 25 | # This module contains global variables used in multiple modules in the test | COMMENT |
| MEDIUM | third-party/curl/tests/util.py | 69 | # Create the test filename | COMMENT |
| MEDIUM | third-party/curl/tests/servers.pm | 25 | # This module contains functions that are useful for managing the lifecycle of | COMMENT |
| MEDIUM | third-party/curl/tests/servers.pm | 176 | # Create a server socket on a random (unused) port, then close it and | COMMENT |
| MEDIUM | third-party/curl/tests/servers.pm | 194 | # Initialize configuration variables | COMMENT |
| MEDIUM | third-party/curl/tests/devtest.pl | 69 | # This function is currently required to be here by servers.pm | COMMENT |
| MEDIUM | third-party/curl/tests/ftpserver.pl | 1146 | # This function is dumb (so far) and removes the quotes if present. | COMMENT |
| MEDIUM | third-party/curl/tests/testutil.pm | 25 | # This module contains miscellaneous functions needed in several parts of | COMMENT |
| MEDIUM | third-party/curl/tests/runtests.pl | 30 | # The following sections need to be modified: | COMMENT |
| MEDIUM | third-party/curl/tests/http/testenv/h2o.py | 287 | # Create a simple test file | COMMENT |
| MEDIUM | third-party/curl/tests/libtest/test613.pl | 47 | # Create the files in alphabetical order, to increase the chances | COMMENT |
| MEDIUM | …rd-party/capstone/bindings/python/capstone/__init__.py | 1035 | # This function is faster than cs_disasm_quick() around 20% because | COMMENT |
| MEDIUM | …party/capstone/bindings/python/capstone/riscv_const.py | 6 | # This file is supposed to be generated automatically | COMMENT |
| MEDIUM | third-party/SDL/build-scripts/androidbuildlibs.sh | 23 | # Create the build directories | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | tools/level_tools/level_dump/main.cpp | 92 | fmt::print("Error: {}\n", e.what()); | CODE |
| LOW | custom_assets/blender_plugins/gltf2_blender_extract.py | 34 | except Exception: | CODE |
| LOW | custom_assets/blender_plugins/gltf2_blender_extract.py | 582 | except Exception: | CODE |
| MEDIUM | goalc/make/MakeSystem.cpp | 511 | lg::print("Error: {}\n", e.what()); | CODE |
| MEDIUM | third-party/fmt/doc/ChangeLog-old.md | 2026 | fmt::print("Error: "); | CODE |
| MEDIUM | third-party/fmt/doc/ChangeLog-old.md | 3171 | fmt::print("Error: {}"); | CODE |
| MEDIUM | third-party/run-clang-tidy/run-clang-tidy.py | 66 | print('Error: could not find compilation database.') | CODE |
| MEDIUM | third-party/run-clang-tidy/run-clang-tidy.py | 296 | print('Error exporting fixes.\n', file=sys.stderr) | CODE |
| MEDIUM | third-party/run-clang-tidy/run-clang-tidy.py | 305 | print('Error applying fixes.\n', file=sys.stderr) | CODE |
| LOW | third-party/curl/tests/negtelnetserver.py | 360 | except Exception: | CODE |
| LOW | third-party/curl/tests/smbserver.py | 348 | except Exception as e: | CODE |
| LOW | third-party/curl/tests/smbserver.py | 433 | except Exception: | CODE |
| LOW | third-party/curl/tests/dictserver.py | 178 | except Exception: | CODE |
| LOW | third-party/curl/tests/http/test_05_errors.py | 199 | except Exception: | CODE |
| MEDIUM | third-party/curl/tests/http/test_05_errors.py | 194 | def accept_and_close(): | CODE |
| LOW | third-party/curl/tests/http/testenv/curl.py | 244 | except Exception: | CODE |
| LOW | third-party/curl/tests/http/testenv/env.py | 271 | except Exception: | CODE |
| LOW | third-party/curl/tests/http/testenv/env.py | 381 | except Exception: | CODE |
| LOW | third-party/curl/tests/http/testenv/ports.py | 47 | except Exception as e: | CODE |
| LOW | third-party/curl/tests/http/testenv/caddy.py | 128 | except Exception: | CODE |
| LOW | third-party/capstone/suite/test_corpus3.py | 171 | except Exception as e: | CODE |
| LOW | third-party/capstone/suite/run_tests.py | 38 | except Exception as e: | CODE |
| LOW | …e/suite/auto-sync/src/autosync/cpptranslator/Differ.py | 1006 | except Exception as e: | CODE |
| MEDIUM | third-party/capstone/bindings/const_generator.py | 216 | print("Error: Unable to convert %s" % f) | CODE |
| MEDIUM | …tone/bindings/python/cstest_py/src/cstest_py/cstest.py | 119 | print("Error messages:") | CODE |
| LOW⚡ | …tone/bindings/python/cstest_py/src/cstest_py/cstest.py | 307 | except Exception as e: | CODE |
| LOW⚡ | …tone/bindings/python/cstest_py/src/cstest_py/cstest.py | 314 | except Exception as e: | CODE |
| LOW⚡ | …tone/bindings/python/cstest_py/src/cstest_py/cstest.py | 321 | except Exception as e: | CODE |
| LOW | …tone/bindings/python/cstest_py/src/cstest_py/cstest.py | 411 | except Exception as e: | CODE |
| LOW | third-party/SDL/build-scripts/rename_types.py | 47 | except Exception as err: | CODE |
| LOW | third-party/SDL/build-scripts/rename_types.py | 75 | except Exception as e: | CODE |
| MEDIUM | third-party/SDL/build-scripts/rename_types.py | 37 | def replace_symbols_in_file(file, regex, replacements): | CODE |
| LOW | third-party/SDL/build-scripts/rename_macros.py | 74 | except Exception as err: | CODE |
| LOW | third-party/SDL/build-scripts/rename_macros.py | 101 | except Exception as e: | CODE |
| MEDIUM | third-party/SDL/build-scripts/rename_macros.py | 62 | def apply_checks_in_file(file, checks): | CODE |
| LOW | third-party/SDL/build-scripts/rename_headers.py | 43 | except Exception as err: | CODE |
| LOW | third-party/SDL/build-scripts/rename_headers.py | 70 | except Exception as e: | CODE |
| MEDIUM | third-party/SDL/build-scripts/rename_headers.py | 31 | def replace_headers_in_file(file, replacements): | CODE |
| LOW | third-party/SDL/build-scripts/rename_symbols.py | 95 | except Exception as err: | CODE |
| LOW | third-party/SDL/build-scripts/rename_symbols.py | 125 | except Exception as e: | CODE |
| MEDIUM | third-party/SDL/build-scripts/rename_symbols.py | 85 | def replace_symbols_in_file(file, regex, replacements): | CODE |
| LOW | third-party/SDL/build-scripts/rename_api.py | 249 | except Exception as e: | CODE |
| LOW | third-party/run-clang-format/run-clang-format.py | 146 | except Exception as e: | CODE |
| MEDIUM | third-party/run-clang-format/run-clang-format.py | 140 | def run_clang_format_diff_wrapper(args, file): | CODE |
| MEDIUM | third-party/xdelta3/xdelta3/testing/xdelta3-regtest.py | 406 | def Main(self, args): | CODE |
| LOW | third-party/gtest-parallel/gtest_parallel.py | 594 | except Exception: | CODE |
| MEDIUM | third-party/gtest-parallel/gtest_parallel.py | 590 | def __read_test_times_file(fd): | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | game/graphics/opengl_renderer/foreground/Merc2.cpp | 426 | // next, we need to check if we have enough room to draw this effect. | COMMENT |
| LOW | goalc/regalloc/Allocator_v2.cpp | 713 | // Step 1: check other assignments | COMMENT |
| LOW | goalc/regalloc/Allocator_v2.cpp | 741 | // Step 2: check clobbers and excludes. | COMMENT |
| LOW | goalc/regalloc/Allocator_v2.cpp | 777 | // Step 1: check other assignments | COMMENT |
| LOW | goalc/regalloc/Allocator_v2.cpp | 815 | // Step 2: check clobbers and excludes. | COMMENT |
| LOW | scripts/gsrc/update-from-decomp.py | 83 | # Step 2: Cleanup the decomp output | COMMENT |
| LOW | scripts/gsrc/update-from-decomp.py | 163 | # Step 3: Start merging the new code + comments | COMMENT |
| LOW⚡ | scripts/gsrc/code_retention/all_types_retention.py | 16 | # Step 1: Get the blocks | COMMENT |
| LOW⚡ | scripts/gsrc/code_retention/all_types_retention.py | 18 | # Step 2: Update the blocks (group by file name to minimize file IO operations) | COMMENT |
| LOW | third-party/dragonbox.h | 2375 | // Step 1: integer promotion & Schubfach multiplier calculation | COMMENT |
| LOW | third-party/dragonbox.h | 2420 | // Step 2: Try larger divisor; remove trailing zeros if necessary | COMMENT |
| LOW | third-party/dragonbox.h | 2476 | // Step 3: Find the significand with the smaller divisor | COMMENT |
| LOW | third-party/dragonbox.h | 2642 | // Step 1: integer promotion & Schubfach multiplier calculation | COMMENT |
| LOW | third-party/dragonbox.h | 2677 | // Step 2: Try larger divisor; remove trailing zeros if necessary | COMMENT |
| LOW | third-party/dragonbox.h | 2714 | // Step 3: Find the significand with the smaller divisor | COMMENT |
| LOW | third-party/dragonbox.h | 2730 | // Step 1: integer promotion & Schubfach multiplier calculation | COMMENT |
| LOW | third-party/dragonbox.h | 2768 | // Step 2: Try larger divisor; remove trailing zeros if necessary | COMMENT |
| LOW | third-party/dragonbox.h | 2806 | // Step 3: Find the significand with the small divisor | COMMENT |
| LOW | third-party/fmt/include/fmt/format-inl.h | 1260 | // Step 1: integer promotion & Schubfach multiplier calculation. | COMMENT |
| LOW | third-party/fmt/include/fmt/format-inl.h | 1315 | // Step 2: Try larger divisor; remove trailing zeros if necessary. | COMMENT |
| LOW | third-party/fmt/include/fmt/format-inl.h | 1347 | // Step 3: Find the significand with the smaller divisor. | COMMENT |
| LOW | third-party/imgui/imgui.cpp | 3341 | // Step 0: Let you process the first element (regardless of it being visible or not, so we can measure the element h | COMMENT |
| LOW | third-party/imgui/imgui.cpp | 3358 | // Step 1: Let the clipper infer height from first range | COMMENT |
| LOW | third-party/draco/src/draco/mesh/mesh.h | 106 | // The purpose of this function is to allow users to add attributes with | COMMENT |
| LOW | third-party/capstone/MCInstPrinter.c | 231 | // Here we need to check if a previous entry is of the same encoding | COMMENT |
| LOW | third-party/capstone/MCInstPrinter.c | 270 | // Here we need to check if a previous entry is of the same encoding | COMMENT |
| LOW | …oject/app/src/main/java/org/libsdl/app/SDLSurface.java | 277 | // We need to check if we're in relative mouse mode and get the axis offset rather than the x/y values | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5552 | // Step 1: Extract MSB of each byte (vshr #7: 0x80->1, 0x7F->0) | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5555 | // Step 2: Shift each byte left by its bit position (0-7 per half) | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5571 | // Step 3: Sum each half -> bits [7:0] and [15:8] | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5577 | // Step 1: Extract MSB of each byte | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5581 | // Step 2: Parallel bit collection via shift-right-accumulate | COMMENT |
| LOW | third-party/sse2neon/sse2neon.h | 5599 | // Step 3: Extract packed result from byte 0 of each half | COMMENT |
| LOW | third-party/tiny_gltf/tiny_gltf.h | 6769 | // TODO(syoyo): Do we need to check if `version` is greater or equal to 2.0? | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | game/assets/jak2/subtitle/subtitle_lines_gl-ES.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_lt-LT.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_ro-RO.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_hr-HR.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_en-US.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_en-GB.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_is-IS.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_bs-BA.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_sv-SE.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_no-NO.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_pt-PT.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_ko-KR.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak2/subtitle/subtitle_lines_ja-JP.json | 2925 | "Don't forget to tell Torn how well we did!" | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_lt-LT.json | 14 | "OH! AND WHEN YOU GET ACROSS, DON'T FORGET TO ACTIVATE", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_lt-LT.json | 71 | "AND DON'T FORGET TO ACTIVATE THE TELEPORT GATE IN THE YELLOW SAGE'S LAB.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_lt-LT.json | 1784 | "DON'T FORGET TO TURN ON THE TELEPORT GATE TO LET US THROUGH.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_ro-RO.json | 14 | "OH! AND WHEN YOU GET ACROSS, DON'T FORGET TO ACTIVATE", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_ro-RO.json | 71 | "AND DON'T FORGET TO ACTIVATE THE TELEPORT GATE IN THE YELLOW SAGE'S LAB.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_ro-RO.json | 1784 | "DON'T FORGET TO TURN ON THE TELEPORT GATE TO LET US THROUGH.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_hr-HR.json | 1784 | "DON'T FORGET TO TURN ON THE TELEPORT GATE TO LET US THROUGH.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_en-US.json | 14 | "OH! AND WHEN YOU GET ACROSS, DON'T FORGET TO ACTIVATE", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_en-US.json | 71 | "AND DON'T FORGET TO ACTIVATE THE TELEPORT GATE IN THE YELLOW SAGE'S LAB.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_en-US.json | 1784 | "DON'T FORGET TO TURN ON THE TELEPORT GATE TO LET US THROUGH.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_en-GB.json | 154 | "DON'T FORGET TO TURN ON THE TELEPORT GATE TO LET US THROUGH.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_is-IS.json | 14 | "OH! AND WHEN YOU GET ACROSS, DON'T FORGET TO ACTIVATE", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_is-IS.json | 71 | "AND DON'T FORGET TO ACTIVATE THE TELEPORT GATE IN THE YELLOW SAGE'S LAB.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_is-IS.json | 1784 | "DON'T FORGET TO TURN ON THE TELEPORT GATE TO LET US THROUGH.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_no-NO.json | 1784 | "DON'T FORGET TO TURN ON THE TELEPORT GATE TO LET US THROUGH.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_pt-PT.json | 1784 | "DON'T FORGET TO TURN ON THE TELEPORT GATE TO LET US THROUGH.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_ko-KR.json | 14 | "OH! AND WHEN YOU GET ACROSS, DON'T FORGET TO ACTIVATE", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_ko-KR.json | 71 | "AND DON'T FORGET TO ACTIVATE THE TELEPORT GATE IN THE YELLOW SAGE'S LAB.", | CODE |
| LOW | game/assets/jak1/subtitle/subtitle_lines_ko-KR.json | 1784 | "DON'T FORGET TO TURN ON THE TELEPORT GATE TO LET US THROUGH.", | CODE |
| MEDIUM | goalc/emitter/IGenARM64.cpp | 2421 | // It's worth noting that these x86 instructions also have limitations, they cannot | COMMENT |
| LOW | goalc/compiler/IR.cpp | 159 | // don't forget to sign extend | COMMENT |
| LOW | scripts/gsrc/iteratively-copy-decomp.py | 7 | # then make sure to enable offline tests | COMMENT |
| MEDIUM⚡ | third-party/fmt/doc-html/search/search_index.json | 1 | {"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"index.html","title" | CODE |
| MEDIUM | third-party/imgui/imgui_widgets.cpp | 7293 | // Tip: pass a non-visible label (e.g. "##hello") then you can use the space to draw other text or image. | COMMENT |
| LOW | third-party/imgui/imgui.cpp | 981 | - 2017/08/25 (1.52) - io.MousePos needs to be set to ImVec2(-FLT_MAX,-FLT_MAX) when mouse is unavailable/missing. Previ | CODE |
| MEDIUM | third-party/curl/lib/vtls/gtls.c | 1842 | given hostname. This is a basic implementation of the matching described | CODE |
| LOW | third-party/SDL/include/SDL3/SDL_process.h | 39 | * Don't forget to call SDL_DestroyProcess() to clean up, whether the process | COMMENT |
| LOW | …ird-party/SDL/src/render/direct3d11/SDL_render_d3d11.c | 542 | * Don't forget to declare your application's minimum required feature level in its | COMMENT |
| MEDIUM | third-party/xdelta3/xdelta3/xdelta3-fgk.h | 16 | For demonstration purposes only. | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | goalc/regalloc/Allocator_v2.cpp | 713 | // Step 1: check other assignments | COMMENT |
| LOW | goalc/regalloc/Allocator_v2.cpp | 741 | // Step 2: check clobbers and excludes. | COMMENT |
| LOW | goalc/regalloc/Allocator_v2.cpp | 777 | // Step 1: check other assignments | COMMENT |
| LOW | goalc/regalloc/Allocator_v2.cpp | 815 | // Step 2: check clobbers and excludes. | COMMENT |
| LOW | scripts/gsrc/update-from-decomp.py | 56 | # Step 1 - Find and update all named blocks from all-types (useful for enums) | COMMENT |
| LOW | scripts/gsrc/update-from-decomp.py | 83 | # Step 2: Cleanup the decomp output | COMMENT |
| LOW | scripts/gsrc/update-from-decomp.py | 163 | # Step 3: Start merging the new code + comments | COMMENT |
| LOW⚡ | scripts/gsrc/code_retention/all_types_retention.py | 16 | # Step 1: Get the blocks | COMMENT |
| LOW⚡ | scripts/gsrc/code_retention/all_types_retention.py | 18 | # Step 2: Update the blocks (group by file name to minimize file IO operations) | COMMENT |
| LOW | third-party/dragonbox.h | 2375 | // Step 1: integer promotion & Schubfach multiplier calculation | COMMENT |
| LOW | third-party/dragonbox.h | 2420 | // Step 2: Try larger divisor; remove trailing zeros if necessary | COMMENT |
| LOW | third-party/dragonbox.h | 2476 | // Step 3: Find the significand with the smaller divisor | COMMENT |
| LOW | third-party/dragonbox.h | 2642 | // Step 1: integer promotion & Schubfach multiplier calculation | COMMENT |
| LOW | third-party/dragonbox.h | 2677 | // Step 2: Try larger divisor; remove trailing zeros if necessary | COMMENT |
| LOW | third-party/dragonbox.h | 2714 | // Step 3: Find the significand with the smaller divisor | COMMENT |
| LOW | third-party/dragonbox.h | 2730 | // Step 1: integer promotion & Schubfach multiplier calculation | COMMENT |
| LOW | third-party/dragonbox.h | 2768 | // Step 2: Try larger divisor; remove trailing zeros if necessary | COMMENT |
| LOW | third-party/dragonbox.h | 2806 | // Step 3: Find the significand with the small divisor | COMMENT |
| LOW | third-party/fmt/include/fmt/format-inl.h | 1260 | // Step 1: integer promotion & Schubfach multiplier calculation. | COMMENT |
| LOW | third-party/fmt/include/fmt/format-inl.h | 1315 | // Step 2: Try larger divisor; remove trailing zeros if necessary. | COMMENT |
| LOW | third-party/fmt/include/fmt/format-inl.h | 1347 | // Step 3: Find the significand with the smaller divisor. | COMMENT |
| LOW | third-party/imgui/imgui.cpp | 3341 | // Step 0: Let you process the first element (regardless of it being visible or not, so we can measure the element h | COMMENT |
| LOW | third-party/imgui/imgui.cpp | 3358 | // Step 1: Let the clipper infer height from first range | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5552 | // Step 1: Extract MSB of each byte (vshr #7: 0x80->1, 0x7F->0) | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5555 | // Step 2: Shift each byte left by its bit position (0-7 per half) | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5571 | // Step 3: Sum each half -> bits [7:0] and [15:8] | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5577 | // Step 1: Extract MSB of each byte | COMMENT |
| LOW⚡ | third-party/sse2neon/sse2neon.h | 5581 | // Step 2: Parallel bit collection via shift-right-accumulate | COMMENT |
| LOW | third-party/sse2neon/sse2neon.h | 5599 | // Step 3: Extract packed result from byte 0 of each half | COMMENT |
| LOW | third-party/zydis/tools/ZydisFuzzShared.c | 157 | // NOTE: This function doesn't validate flag values, yet. | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | …etest/test/googletest-param-test-invalid-name1-test.py | 0 | verifies that google test warns the user when not initialized properly. | STRING |
| HIGH | …etest/test/googletest-param-test-invalid-name2-test.py | 0 | verifies that google test warns the user when not initialized properly. | STRING |
| HIGH | …etest/googletest/test/googletest-uninitialized-test.py | 0 | verifies that google test warns the user when not initialized properly. | STRING |
| HIGH | …etest/test/googletest-param-test-invalid-name1-test.py | 0 | runs the given command and verifies its exit code and output. | STRING |
| HIGH | …etest/test/googletest-param-test-invalid-name2-test.py | 0 | runs the given command and verifies its exit code and output. | STRING |
| HIGH | …etest/googletest/test/googletest-uninitialized-test.py | 0 | runs the given command and verifies its exit code and output. | STRING |
| HIGH | …/googletest/googletest/test/googletest-env-var-test.py | 0 | sets the env variable to 'value'; unsets it when 'value' is none. | STRING |
| HIGH | …ty/googletest/googletest/test/googletest-color-test.py | 0 | sets the env variable to 'value'; unsets it when 'value' is none. | STRING |
| HIGH | …ogletest/googletest/test/googletest-filter-unittest.py | 0 | sets the env variable to 'value'; unsets it when 'value' is none. | STRING |
| HIGH | …letest/googletest/test/googletest-failfast-unittest.py | 0 | sets the env variable to 'value'; unsets it when 'value' is none. | STRING |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | scripts/analyze_korean.py | 1172 | # Print the results | COMMENT |
| LOW | scripts/analyze_korean.py | 1310 | # Print the results | COMMENT |
| LOW | scripts/tasks/cp.py | 23 | # Check if the path is a file or a directory | COMMENT |
| LOW | scripts/gsrc/update-from-decomp.py | 128 | # Check if we should ignore the form | COMMENT |
| LOW | third-party/curl/projects/OS400/initscript.sh | 72 | # Check if perl available. | COMMENT |
| LOW | third-party/curl/projects/OS400/initscript.sh | 171 | # Set LINK to "YES" if the module has been compiled. | COMMENT |
| LOW | third-party/curl/projects/OS400/make-src.sh | 33 | # Check if built-in manual can be generated. | COMMENT |
| LOW | third-party/curl/tests/test1222.pl | 170 | # Check if paragraph is mentioning deprecation. | COMMENT |
| LOW | third-party/curl/tests/test1222.pl | 288 | # Print results. | COMMENT |
| LOW | third-party/curl/tests/servers.pm | 268 | # Check if a given child process has died. Reaps it if so. | COMMENT |
| LOW | third-party/curl/tests/ech_tests.sh | 284 | # Check if ports other than 443 are blocked from this | COMMENT |
| LOW | third-party/curl/tests/testcurl.pl | 321 | # Set timestamp to the UTC this script is running. Its value might | COMMENT |
| LOW | third-party/curl/tests/testcurl.pl | 416 | # Set timestamp to the UTC the git update took place. | COMMENT |
| LOW | third-party/curl/tests/testcurl.pl | 439 | # Set timestamp to the UTC the git update took place. | COMMENT |
| LOW | third-party/curl/tests/testcurl.pl | 491 | # Set timestamp to the one in curlver.h if this is not a git test build. | COMMENT |
| LOW | third-party/curl/tests/runtests.pl | 319 | # Check if we have nghttpx available and if it talks http/3 | COMMENT |
| LOW | third-party/curl/tests/runtests.pl | 486 | # Check if the operating environment supports UTF-8. | COMMENT |
| LOW | …-party/capstone/suite/auto-sync/src/autosync/Helper.py | 74 | # Check if any child has a matching type. | COMMENT |
| LOW | …o-sync/src/autosync/cpptranslator/TemplateCollector.py | 154 | # Check if this caller has a dependent template call. | COMMENT |
| LOW | third-party/SDL/build-scripts/check_elf_alignment.sh | 105 | # Check if this is a critical architecture (arm64-v8a or x86_64) | COMMENT |
| LOW | third-party/SDL/build-scripts/update-version.sh | 42 | # Set compat to major.minor.0 by default. | COMMENT |
| LOW | …ogletest/googletest/test/googletest-filter-unittest.py | 67 | # Check if this platform can unset environment variables in child processes. | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW⚡ | game/mips2c/jak2_functions/merc_blend_shape.cpp | 53 | const s8* dummy_data = context->dummy; | CODE |
| LOW⚡ | game/mips2c/jak2_functions/merc_blend_shape.cpp | 54 | const auto* first_chunk_header = (ChunkHeader*)dummy_data; | CODE |
| LOW⚡ | game/mips2c/jak2_functions/merc_blend_shape.cpp | 60 | const s8* data_src = dummy_data + stride; // t2/t3 | CODE |
| LOW | game/mips2c/jak2_functions/merc_blend_shape.cpp | 73 | const u8* base_data_ptr = (u8*)dummy_data + 16; // ra in asm | CODE |
| LOW | game/mips2c/jak2_functions/merc_blend_shape.cpp | 74 | const s8* base_data_ptr_s = dummy_data + 16; // ra in asm | CODE |
| LOW | decompiler/config/jakx/ntsc_v1/tex-info.min.json | 1 | [[197918735,{"idx":15,"name":"drome-concrete-01","tpage_name":"dromec-vis-tfrag"}],[176816166,{"idx":38,"name":"temple-a | CODE |
| LOW | decompiler/config/jak1/ntsc_v1/tex-info.min.json | 1 | [[2147418112,{"idx":0,"name":"placeholder-white","tpage_name":"placeholder"}],[105447426,{"idx":2,"name":"demo5cj","tpag | CODE |
| LOW | decompiler/data/TextureDB.cpp | 15 | "placeholder-white", "placeholder", {}, 1, 0); | CODE |
| LOW⚡ | third-party/imgui/imgui_demo.cpp | 7559 | ImGui::TextWrapped("Lorem ipsum dolor sit amet"); | CODE |
| LOW⚡ | third-party/imgui/imgui_demo.cpp | 7559 | ImGui::TextWrapped("Lorem ipsum dolor sit amet"); | CODE |
| LOW⚡ | third-party/imgui/imgui_demo.cpp | 7561 | ImGui::Text("Lorem ipsum dolor sit amet"); | CODE |
| LOW⚡ | third-party/imgui/imgui_demo.cpp | 7561 | ImGui::Text("Lorem ipsum dolor sit amet"); | CODE |
| LOW | third-party/imgui/imgui_demo.cpp | 9419 | ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor i | CODE |
| LOW | third-party/imgui/imgui_demo.cpp | 9419 | ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor i | CODE |
| LOW | third-party/imgui/imgui_demo.cpp | 10278 | ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut | CODE |
| LOW | third-party/imgui/imgui_demo.cpp | 10278 | ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut | CODE |
| LOW | third-party/curl/tests/libtest/lib1507.c | 59 | curl_easy_setopt(curl, CURLOPT_USERNAME, "user@example.com"); | CODE |
| LOW | …d-party/curl/docs/libcurl/opts/CURLOPT_UPLOAD_FLAGS.md | 100 | curl_easy_setopt(curl, CURLOPT_USERNAME, "user@example.com"); | CODE |
| LOW | third-party/curl/docs/examples/ftpuploadfrommem.c | 34 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit. " | CODE |
| LOW | third-party/curl/docs/examples/ftpuploadfrommem.c | 34 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit. " | CODE |
| LOW | third-party/curl/docs/examples/post-callback.c | 35 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit. " | CODE |
| LOW | third-party/curl/docs/examples/post-callback.c | 35 | "Lorem ipsum dolor sit amet, consectetur adipiscing elit. " | CODE |
| LOW | third-party/googletest/docs/reference/mocking.md | 277 | .WillRepeatedly(Return("John Doe")); // Return "John Doe" on all calls | CODE |
| LOW | …c/thirdparty/rapidjson-1.1.0/bin/types/paragraphs.json | 12 | "Mollit velit laboris laborum nulla aliquip consequat Lorem non incididunt irure. Eu voluptate sint do consectetur tem | CODE |
| LOW | …c/thirdparty/rapidjson-1.1.0/bin/types/paragraphs.json | 53 | "Cillum nulla et eu est nostrud quis elit cupidatat dolor enim excepteur exercitation nisi voluptate. Nulla dolore non | CODE |
| LOW | …rd-rpc/thirdparty/rapidjson-1.1.0/bin/types/mixed.json | 397 | "about": "Proident ullamco Lorem est consequat consectetur non eiusmod esse nostrud pariatur eiusmod enim exercitati | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …ts/gsrc/skeleton_creation/make_empty_obj_files_jakx.py | 19 | CODE | |
| LOW | third-party/replxx/tests.py | 254 | CODE | |
| LOW | third-party/curl/tests/http/scorecard.py | 231 | CODE | |
| LOW | third-party/curl/tests/http/scorecard.py | 672 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 611 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 719 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 792 | CODE | |
| LOW | third-party/curl/tests/http/testenv/curl.py | 1085 | CODE | |
| LOW | third-party/curl/tests/http/testenv/certs.py | 83 | CODE | |
| LOW | …rty/capstone/suite/auto-sync/src/autosync/MCUpdater.py | 74 | CODE | |
| LOW | …rc/autosync/cpptranslator/patches/MethodToFunctions.py | 45 | CODE | |
| LOW | …/cpptranslator/patches/DeclarationInConditionClause.py | 50 | CODE | |
| LOW | …sync/src/autosync/cpptranslator/patches/STParameter.py | 41 | CODE | |
| LOW | …ync/src/autosync/cpptranslator/patches/TemplateRefs.py | 41 | CODE | |
| LOW | …/src/autosync/cpptranslator/patches/GetRegFromClass.py | 44 | CODE | |
| LOW | …/autosync/cpptranslator/patches/MethodTypeQualifier.py | 40 | CODE | |
| LOW | …c/src/autosync/cpptranslator/patches/ReferencesDecl.py | 39 | CODE | |
| LOW | …auto-sync/src/autosync/cpptranslator/patches/Helper.py | 145 | CODE | |
| LOW | …src/autosync/cpptranslator/patches/RegClassContains.py | 42 | CODE | |
| LOW | …auto-sync/src/autosync/cpptranslator/patches/isUInt.py | 45 | CODE | |
| LOW | …sync/src/autosync/cpptranslator/patches/GetRegClass.py | 45 | CODE | |
| LOW | …c/src/autosync/cpptranslator/patches/OutStreamParam.py | 44 | CODE | |
| LOW | …sync/src/autosync/cpptranslator/patches/STIArgument.py | 33 | CODE | |
| LOW | …/src/autosync/cpptranslator/patches/LLVMunreachable.py | 34 | CODE | |
| LOW | …y/googletest/googletest/test/googletest-output-test.py | 200 | CODE | |
| LOW | …-party/googletest/googlemock/test/gmock_output_test.py | 72 | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH⚡ | …e-sitter/tree-sitter/lib/binding_web/test/node-test.js | 81 | elif two: | CODE |
| HIGH⚡ | …e-sitter/tree-sitter/lib/binding_web/test/node-test.js | 83 | elif three: | CODE |
| HIGH⚡ | …e-sitter/tree-sitter/lib/binding_web/test/node-test.js | 85 | elif four: | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH⚡ | third-party/fmt/doc-html/search/search_index.json | 1 | {"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"index.html","title" | CODE |
| HIGH | third-party/SDL/src/io/SDL_sysasyncio.h | 85 | LINKED_LIST_DECLARE_FIELDS(struct SDL_AsyncIOTask, queue); // the generic backend uses this, so I've added it h | CODE |
| HIGH | third-party/SDL/src/io/SDL_sysasyncio.h | 86 | LINKED_LIST_DECLARE_FIELDS(struct SDL_AsyncIOTask, threadpool); // the generic backend uses this, so I've added it h | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | scripts/gsrc/code_retention/code_retention.py | 14 | # if the stack is empty, return true | COMMENT |
| HIGH | third-party/fmt/support/release.py | 160 | fmt_repo.push('origin', 'release') | CODE |
| HIGH | third-party/fmt/support/printable.py | 194 | print(" if (0x{:x} <= cp && cp < 0x{:x}) return false;".format(a, a + b)) | STRING |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | test/offline/offline_test_main.cpp | 11 | #include "framework/orchestration.h" | COMMENT |
| MEDIUM | test/offline/framework/orchestration.cpp | 1 | #include "orchestration.h" | COMMENT |
| MEDIUM | test/offline/framework/execution.h | 3 | #include "orchestration.h" | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …ter/tree-sitter/cli/src/generate/templates/__init__.py | 5 | __all__ = ["language"] | CODE |
| LOW | third-party/fmt/support/docopt.py | 13 | __all__ = ['docopt'] | CODE |
| LOW | third-party/capstone/bindings/python/setup.py | 14 | logger = logging.getLogger(__name__) | CODE |
| LOW | …rd-party/capstone/bindings/python/capstone/__init__.py | 5 | __all__ = [ | CODE |
| LOW | third-party/SDL/test/emscripten/driver.py | 20 | logger = logging.getLogger(__name__) | CODE |
| LOW | third-party/SDL/.github/workflows/create-test-plan.py | 12 | logger = logging.getLogger(__name__) | CODE |
| LOW | third-party/SDL/build-scripts/setup-gdk-desktop.py | 20 | logger = logging.getLogger(__name__) | CODE |
| LOW | third-party/SDL/build-scripts/build-release.py | 36 | logger = logging.getLogger(__name__) | CODE |
| LOW | third-party/SDL/src/dynapi/gendynapi.py | 59 | logger = logging.getLogger(__name__) | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | game/mips2c/readme.md | 67 | Note: you will need to add a third argument to `gLinkedFunctionTable.reg(` in the auto-generated code with the maximum a | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | …d-party/googletest/googletest/test/gtest_test_utils.py | 198 | Changes into a specified directory, if provided, and executes a command. Restores the old directory afterwards. | STRING |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | third-party/curl/tests/libtest/mk-lib1521.pl | 28 | # Usage: | COMMENT |
| LOW | third-party/curl/docs/examples/version-check.pl | 36 | # Usage: | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | third-party/gtest-parallel/gtest_parallel_mocks.py | 99 | def run_task(self, task): | CODE |
| LOW | third-party/gtest-parallel/gtest_parallel.py | 299 | def run_task(self, task): | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | third-party/mman/mman.c | 16 | //TODO: implement | COMMENT |