4.1

Adjusted Signal

4.1

Raw Pattern Score

100%

Time Factor

2026-10-29

Last Push

13.9K

Stars

Language

662.7K

Lines of Code

1.2K

Files

2.0K

Pattern Hits

2026-10-31

Scan Date

0.07

HC Hit Rate

Risk Review · Payload v1

Use each vector to guide manual verification of the underlying findings.

Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.

Cognitive Ownership Risk 11.7/100 · LOW

Can maintainers explain intent, assumptions, and trade-offs? 1560 finding(s).

Hallucinated Dependency & Supply Chain Risk 3.4/100 · LOW

Are imports declared and package/API names verified? 116 finding(s).

Agent Over-Engineering Ratio 5.0/100 · LOW

Are wrappers, guards, and repeated structures necessary? 359 finding(s).

PR Review Velocity Impact 21.5/100 · LOW

Which changes need focused human review? 1972 finding(s).

What These Metrics Mean

Adjusted Signal: Legacy pattern score normalized per 1,000 scanned lines and multiplied by the repository-level time factor. It is not an estimate of AI authorship.
Raw Pattern Score: Sum of severity- and context-weighted pattern findings before applying the time factor.
Time Factor: A coarse multiplier based on repository last-push metadata. It does not identify when individual code was written.
Pattern Hits: Count of configured pattern findings. Review each location and surrounding code before acting.
HC Hit Rate: High- and critical-severity findings per scanned file. Severity is a configured detector weight, not proof of a vulnerability or authorship.
Lines / Files: Scan coverage denominators used by the legacy normalized score.

Pattern-Signal History

This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.

Severity Breakdown

Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.

CRITICAL 49HIGH 30MEDIUM 325LOW 1568

Directory Score Breakdown

This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.

Pattern Findings

The scanner identified 1972 distinct pattern matches across 17 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.

Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.

Over-Commented Block1299 hits · 1181 pts

Severity	File	Line	Snippet	Context
LOW	utils.h	61	/* $Id$ */	COMMENT
LOW	ltmain.sh	1	# Generated from ltmain.m4sh.	COMMENT
LOW	ltmain.sh	21	# WITHOUT ANY WARRANTY; without even the implied warranty of	COMMENT
LOW	ltmain.sh	41	# --quiet, --silent don't print informational messages	COMMENT
LOW	ltmain.sh	61	# include the following information:	COMMENT
LOW	ltmain.sh	141	'	COMMENT
LOW	ltmain.sh	2701	{	COMMENT
LOW	ltmain.sh	2921	exit 1	COMMENT
LOW	ltmain.sh	2961	# is running under the msys shell), or in the following cross-	COMMENT
LOW	ltmain.sh	3021	# Fallback:	COMMENT
LOW	ltmain.sh	3041	# Path separators are also converted from $build format to	COMMENT
LOW	ltmain.sh	3161	# ifdef __CYGWIN__	COMMENT
LOW	ltmain.sh	3181	# define LT_PATHMAX PATH_MAX	COMMENT
LOW	ltmain.sh	3201	#endif	COMMENT
LOW	ltmain.sh	3221	# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)	COMMENT
LOW	ltmain.sh	6001	-L*) new_libs="$deplib $new_libs" ;;	COMMENT
LOW	ltmain.sh	8381	# The TAGs below are defined such that we never get into a situation	COMMENT
LOW	ltmain.sh	8401	# Local Variables:	COMMENT
LOW	nmap.h	61		COMMENT
LOW	nmap.h	81	#if HAVE_UNISTD_H	COMMENT
LOW	nmap.h	101	// #if HAVE_NETINET_IF_ETHER_H	COMMENT
LOW	nmap.h	161		COMMENT
LOW	nmap.h	181	#define MAX_SERVICE_INFO_FIELDS 5	COMMENT
LOW	nmap.h	201	#endif	COMMENT
LOW	struct_ip.h	21	typedef unsigned __int32 u_int32_t;	COMMENT
LOW	struct_ip.h	41	#define NETINET_IN_SYSTM_H	COMMENT
LOW	struct_ip.h	161	#define icmp_ttime icmp_dun.id_ts.its_ttime	COMMENT
LOW	scan_engine.h	61	***************************************************************************/	COMMENT
LOW	osscan2.h	81		COMMENT
LOW	osscan2.h	101	#define NUM_SEQ_SAMPLES 6	COMMENT
LOW	nse_main.h	61	# define SCRIPT_ENGINE_LUA_DIR "scripts/"	COMMENT
LOW	service_scan.h	61	***************************************************************************/	COMMENT
LOW	service_scan.h	121	/******************** CLASSES *********************************/	COMMENT
LOW	service_scan.h	241	bool serviceIsPossible(const char *sname) const;	COMMENT
LOW	output.h	61	* indemnification and commercial support are all available through the	COMMENT
LOW	nmap_winconfig.h	81	#define DNET_INCLUDED 1	COMMENT
LOW	Target.h	61	***************************************************************************/	COMMENT
LOW	nse_utility.h	1	#ifndef NMAP_NSE_UTILITY_H	COMMENT
LOW	portlist.h	61	/* $Id$ */	COMMENT
LOW	portlist.h	221	int getStateCounts(int protocol, int state) const;	COMMENT
LOW	nmap_error.h	61	/* $Id$ */	COMMENT
LOW	nmap_amigaos.h	61		COMMENT
LOW	nmap_amigaos.h	81	#define pcap_open_live(a, b, c, d...) MiamiPCapOpenLive(a, b, 0, d)	COMMENT
LOW	nse_lua.h	1	#ifndef NSE_LUA_H	COMMENT
LOW	nse_lua.h	21	#include <lua/5.4/lua.h>	COMMENT
LOW	ndiff/ndifftest.py	101	def test_script(self):	COMMENT
LOW	ndiff/ndiff.py	1	#!/usr/bin/env python3	COMMENT
LOW	mswin32/winfix.h	1	#ifndef WINFIX_H	COMMENT
LOW	mswin32/resource.h	1	//{{NO_DEPENDENCIES}}	COMMENT
LOW	mswin32/NETINET/IP_ICMP.H	101	#define ICMP_MASKLEN 12 /* address mask */	COMMENT
LOW	mswin32/NETINET/IP_ICMP.H	121	#define ICMP_UNREACH_HOST_PROHIB 10 /* ditto */	COMMENT
LOW	mswin32/NETINET/IF_ETHER.H	81	u_char arp_tha[6]; /* target hardware address */	COMMENT
LOW	mswin32/NETINET/IP.H	81	#define IP_MAXPACKET 65535 /* maximum packet size */	COMMENT
LOW	mswin32/NETINET/IP.H	101		COMMENT
LOW	mswin32/NETINET/IP.H	161	/* bits for security (not byte swapped) */	COMMENT
LOW	libdnet-stripped/acconfig.h	1	@BOTTOM@	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	1	#! /usr/bin/env sh	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	21	# same distribution terms that you use for the rest of that program.	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	41		COMMENT
LOW	libdnet-stripped/config/ltmain.sh	61	## -------------------------- ##	COMMENT
1239 more matches not shown…

Decorative Section Separators220 hits · 453 pts

Severity	File	Line	Snippet	Context
MEDIUM	libdnet-stripped/config/ltmain.sh	157	# --------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	183	# ----------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	192	# --------------------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	378	# ---------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	523	# -------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	572	# ---------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	618	# ----------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	641	# --------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	665	# ------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	689	# ------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	722	# -------------------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	734	# --------------------------------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	755	# ----------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	774	# --------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	783	# ------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	819	# -----------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	832	# -----------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	844	# -----------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	855	# ---------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	881	# ---------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	929	# -------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	967	# ------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1057	# --------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1073	# --------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1138	# ----------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1218	# -----------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1253	# ------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1264	# ----------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1317	# ------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1338	# ---------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1368	# -----------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1393	# ------------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1422	# ----------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1443	# -------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1456	# -----------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1469	# ----------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1494	# -----------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1511	# ---------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1640	# -----------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1652	# ---------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1669	# ------------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1681	# ---------------------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1699	# ---------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1813	# ----------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1825	# ---------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1858	# --------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1879	# ---------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1999	# ------------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2028	# ----------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2056	# ------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2069	# ------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2105	# -----------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2131	# ----------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2144	# ------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2164	# ------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2221	# ------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2245	# ----------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2336	# ---------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2353	# ---------------------------	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2375	# -------------------------------	COMMENT
160 more matches not shown…

Hallucination Indicators49 hits · 395 pts

Severity	File	Line	Snippet	Context
CRITICAL	nselib/coap.lua	723	return COAP.header.options.value.uint.build(val)	CODE
CRITICAL	nselib/coap.lua	736	return COAP.header.options.value.uint.parse(buf)	CODE
CRITICAL	nselib/coap.lua	751	return COAP.header.options.value.block.build(val)	CODE
CRITICAL	nselib/coap.lua	766	return COAP.header.options.value.block.parse(buf)	CODE
CRITICAL	nselib/coap.lua	781	return COAP.header.options.value.block.build(val)	CODE
CRITICAL	nselib/coap.lua	796	return COAP.header.options.value.block.parse(buf)	CODE
CRITICAL	nselib/coap.lua	826	return COAP.header.options.value.uint.build(val)	CODE
CRITICAL	nselib/coap.lua	839	local val = COAP.header.options.value.uint.parse(buf)	CODE
CRITICAL	nselib/coap.lua	865	return COAP.header.options.value.opaque.build(val)	CODE
CRITICAL	nselib/coap.lua	880	return COAP.header.options.value.opaque.parse(buf)	CODE
CRITICAL	nselib/coap.lua	896	return COAP.header.options.value.opaque.build(val)	CODE
CRITICAL	nselib/coap.lua	910	return COAP.header.options.value.opaque.parse(buf)	CODE
CRITICAL	nselib/coap.lua	925	return COAP.header.options.value.empty.build(val)	CODE
CRITICAL	nselib/coap.lua	940	return COAP.header.options.value.empty.parse(buf)	CODE
CRITICAL	nselib/coap.lua	955	return COAP.header.options.value.string.build(val)	CODE
CRITICAL	nselib/coap.lua	968	return COAP.header.options.value.string.parse(buf)	CODE
CRITICAL	nselib/coap.lua	983	return COAP.header.options.value.string.build(val)	CODE
CRITICAL	nselib/coap.lua	996	return COAP.header.options.value.string.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1009	return COAP.header.options.value.uint.build(val)	CODE
CRITICAL	nselib/coap.lua	1022	return COAP.header.options.value.uint.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1037	return COAP.header.options.value.string.build(val)	CODE
CRITICAL	nselib/coap.lua	1049	return COAP.header.options.value.string.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1062	return COAP.header.options.value.string.build(val)	CODE
CRITICAL	nselib/coap.lua	1075	return COAP.header.options.value.string.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1088	return COAP.header.options.value.uint.build(val)	CODE
CRITICAL	nselib/coap.lua	1101	return COAP.header.options.value.uint.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1116	return COAP.header.options.value.string.build(val)	CODE
CRITICAL	nselib/coap.lua	1129	return COAP.header.options.value.string.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1144	return COAP.header.options.value.string.build(val)	CODE
CRITICAL	nselib/coap.lua	1157	return COAP.header.options.value.string.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1172	return COAP.header.options.value.uint.build(val)	CODE
CRITICAL	nselib/coap.lua	1185	return COAP.header.options.value.uint.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1198	return COAP.header.options.value.string.build(val)	CODE
CRITICAL	nselib/coap.lua	1211	return COAP.header.options.value.string.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1284	local str = COAP.header.options.value.uint.build(num)	CODE
CRITICAL	nselib/coap.lua	1320	local num = COAP.header.options.value.uint.parse(buf)	CODE
CRITICAL	nselib/coap.lua	1747	return true, COAP.header.options.value.string.parse(buf)	CODE
CRITICAL	nselib/coap.lua	2277	local str = COAP.header.options.value.uint.build(test_num)	CODE
CRITICAL	nselib/coap.lua	2281	local num = COAP.header.options.value.uint.parse(test_str)	CODE
CRITICAL	zenmap/zenmapGUI/MainWindow.py	537	entry = self.scan_interface.scan_result.scan_result_notebook.nmap_output.get_active_entry() # noqa	CODE
CRITICAL	zenmap/zenmapGUI/MainWindow.py	912	entry = self.scan_interface.scan_result.scan_result_notebook.nmap_output.get_active_entry() # noqa	CODE
CRITICAL	zenmap/zenmapGUI/ScanInterface.py	162	self.scan_result.scan_result_notebook.scans_list.remove_button.connect(	CODE
CRITICAL	zenmap/zenmapGUI/ScanInterface.py	188	self.scan_result.scan_result_notebook.scans_list.cancel_button.connect(	CODE
CRITICAL	zenmap/zenmapGUI/ScanInterface.py	264	self.scan_result.scan_result_notebook.nmap_output.nmap_output.go_to_host(hostname) # noqa	CODE
CRITICAL	zenmap/zenmapGUI/ScanInterface.py	413	model, selection = self.scan_result.scan_result_notebook.scans_list.scans_list.get_selection().get_selected_rows	CODE
CRITICAL	zenmap/zenmapGUI/ScanInterface.py	420	model, selection = self.scan_result.scan_result_notebook.scans_list.scans_list.get_selection().get_selected_rows	CODE
CRITICAL	zenmap/zenmapGUI/ScanInterface.py	610	self.scan_result.scan_result_notebook.nmap_output.nmap_output.show_large_output_message(command) # noqa	CODE
CRITICAL	zenmap/zenmapGUI/ScanInterface.py	885	self.scan_result_notebook.nmap_output.nmap_output.text_view.get_buffer().set_text(msg) # noqa	CODE
CRITICAL	zenmap/zenmapGUI/ScanInterface.py	888	self.scan_result_notebook.nmap_output.nmap_output.text_view.get_buffer().set_text("") # noqa	CODE

Self-Referential Comments82 hits · 166 pts

Severity	File	Line	Snippet	Context
MEDIUM	ltmain.sh	892	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	ltmain.sh	903	# This function implements the same check as func_lalib_p without	COMMENT
MEDIUM	ltmain.sh	926	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	ltmain.sh	935	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	ltmain.sh	963	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	ltmain.sh	1064	# Create a libtool object file (analogous to a ".la" file),	COMMENT
MEDIUM	ltmain.sh	4937	# Create the object directory.	COMMENT
MEDIUM	ltmain.sh	7447	# Create the old-style object.	COMMENT
MEDIUM	ltmain.sh	7467	# Create an invalid libtool object if no PIC, so that we don't	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	77	# This file is dual licensed under the terms of the MIT license	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1541	# This file is dual licensed under the terms of the MIT license	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	1559	# This file is a library for parsing options in your shell scripts along	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2807	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2817	# This function implements the same check as func_lalib_p without	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2840	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2850	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	2875	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	3015	# Create a libtool object file (analogous to a ".la" file),	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	7938	# Create the object directory.	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	10519	# Create the old-style object.	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	10539	# Create an invalid libtool object if no PIC, so that we don't	COMMENT
MEDIUM	libpcre/ltmain.sh	77	# This file is dual licensed under the terms of the MIT license	COMMENT
MEDIUM	libpcre/ltmain.sh	1529	# This file is dual licensed under the terms of the MIT license	COMMENT
MEDIUM	libpcre/ltmain.sh	1547	# This file is a library for parsing options in your shell scripts along	COMMENT
MEDIUM	libpcre/ltmain.sh	2747	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	libpcre/ltmain.sh	2757	# This function implements the same check as func_lalib_p without	COMMENT
MEDIUM	libpcre/ltmain.sh	2780	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	libpcre/ltmain.sh	2790	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	libpcre/ltmain.sh	2815	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	libpcre/ltmain.sh	2955	# Create a libtool object file (analogous to a ".la" file),	COMMENT
MEDIUM	libpcre/ltmain.sh	7752	# Create the object directory.	COMMENT
MEDIUM	libpcre/ltmain.sh	10431	# Create the old-style object.	COMMENT
MEDIUM	libpcre/ltmain.sh	10451	# Create an invalid libtool object if no PIC, so that we don't	COMMENT
MEDIUM	ncat/test/ncat-test.pl	3	# This file contains tests of the external behavior of Ncat.	COMMENT
MEDIUM	ncat/scripts/p0fme.py	82	# Create a key-value dictionary out of the '\|'-separated substrings.	COMMENT
MEDIUM	zenmap/zenmapCore/NmapCommand.py	59	# This file contains the definitions of the NmapCommand class, which represents	COMMENT
MEDIUM	zenmap/zenmapCore/NmapCommand.py	93	"""This class represents an Nmap command line. It is responsible for	STRING
MEDIUM	zenmap/zenmapCore/ScriptArgsParser.py	117	"""This function is responsible for parsing a table; i.e, a string that	STRING
MEDIUM	zenmap/zenmapCore/NetworkInventory.py	164	"""This function is called when a host needs to be added to the hosts	STRING
MEDIUM	zenmap/zenmapCore/UmitConf.py	184	"""This class represents not just one profile, but a whole collection of	STRING
MEDIUM	zenmap/zenmapCore/UmitConf.py	377	"""This class is a wrapper around Profile that provides accessors for the	STRING
MEDIUM	zenmap/zenmapCore/SearchResult.py	495	"""This class is for use by the unit testing code"""	STRING
MEDIUM	zenmap/zenmapCore/NmapParser.py	658	#Create a dict of port -> protocol for all ports scanned	COMMENT
MEDIUM	zenmap/zenmapCore/Name.py	59	# This file contains global definitions of program names. The plain names are	COMMENT
MEDIUM	zenmap/zenmapGUI/SearchGUI.py	86	"""This class is responsible for parsing the search string, and updating	STRING
MEDIUM	zenmap/zenmapGUI/SearchGUI.py	146	"""This class is a VBox that holds the search entry field and buttons on	STRING
MEDIUM	zenmap/zenmapGUI/SearchGUI.py	562	# Create a subcriterion	COMMENT
MEDIUM	zenmap/zenmapGUI/SearchGUI.py	610	"""This function is called when the user selects a different entry in	STRING
MEDIUM	zenmap/zenmapGUI/SearchGUI.py	615	# Create a new subcriterion depending on the selected operator	COMMENT
MEDIUM	zenmap/zenmapGUI/SearchGUI.py	635	"""This class is a base class for all subcriterion types. Depending on the	STRING
MEDIUM	zenmap/zenmapGUI/SearchGUI.py	651	"""This class represents all 'simple' criterion types that need only an	STRING
MEDIUM	zenmap/zenmapGUI/MainWindow.py	409	"""This function is passed as an argument to the SearchWindow.__init__	STRING
MEDIUM	zenmap/zenmapGUI/MainWindow.py	418	"""This function is passed as an argument to the SearchWindow.__init__	STRING
MEDIUM	zenmap/zenmapGUI/DiffCompare.py	311	"""This method is called whenever the diff output might have changed,	STRING
MEDIUM	zenmap/zenmapGUI/ScriptInterface.py	59	# This module is responsible for interface present under "Scripting" tab.	COMMENT
MEDIUM	zenmap/zenmapGUI/ScansListStore.py	66	"""This class is an abstraction for running and completed scans, which are	STRING
MEDIUM	zenmap/zenmapGUI/ScanInterface.py	192	# Create the filter GUI	COMMENT
MEDIUM	libz/os400/make.sh	164	# Create the OS/400 library if it does not exist.	COMMENT
MEDIUM	libz/os400/make.sh	172	# Create the DOCS source file if it does not exist.	COMMENT
MEDIUM	libz/os400/make.sh	195	# Create the OS/400 source program file for the C header files.	COMMENT
22 more matches not shown…

Empty Error Handlers20 hits · 100 pts

Severity	File	Line	Snippet	Context
HIGH	zenmap/zenmapCore/NmapCommand.py	171	except Exception:	CODE
HIGH	zenmap/zenmapCore/NmapCommand.py	178	except Exception:	CODE
HIGH	zenmap/zenmapCore/UmitConfigParser.py	83	except Exception:	CODE
HIGH	zenmap/zenmapCore/UmitConfigParser.py	89	except Exception:	CODE
HIGH	zenmap/zenmapCore/NetworkInventory.py	579	except Exception:	CODE
HIGH	zenmap/zenmapCore/NetworkInventory.py	126	except ValueError:	CODE
HIGH	zenmap/zenmapCore/UmitConf.py	81	except ImportError:	CODE
HIGH	zenmap/zenmapCore/UmitConf.py	209	except InterpolationError:	CODE
HIGH	zenmap/zenmapCore/UmitConf.py	224	except NoSectionError:	CODE
HIGH	zenmap/zenmapCore/SearchResult.py	484	except Exception:	CODE
HIGH	zenmap/zenmapCore/I18N.py	80	except ValueError:	CODE
HIGH	zenmap/zenmapCore/I18N.py	91	except locale.Error:	CODE
HIGH	zenmap/zenmapCore/I18N.py	99	except ImportError:	CODE
HIGH	zenmap/zenmapGUI/ScanHostsView.py	173	except Exception:	CODE
HIGH	zenmap/zenmapGUI/Icons.py	107	except GLib.GError:	CODE
HIGH	zenmap/zenmapGUI/ProfileEditor.py	116	except configparser.Error:	CODE
HIGH	zenmap/zenmapGUI/ProfileEditor.py	306	except configparser.Error:	CODE
HIGH	zenmap/zenmapGUI/Print.py	132	except GLib.GError:	CODE
HIGH	zenmap/zenmapGUI/ScanInterface.py	430	except ValueError:	CODE
HIGH	zenmap/zenmapGUI/ScanInterface.py	449	except AttributeError:	CODE

Hyper-Verbose Identifiers63 hits · 70 pts

Severity	File	Line	Snippet	Context
LOW	ndiff/ndifftest.py	432	def test_state_change_unknown(self):	CODE
LOW	ndiff/ndifftest.py	490	def test_port_state_change_unknown(self):	CODE
LOW	ndiff/ndifftest.py	503	def test_port_state_change_multi(self):	CODE
LOW	ndiff/ndiff.py	183	def extraports_to_dom_fragment(self, document):	CODE
LOW	ndiff/ndiff.py	464	def print_script_result_diffs_text(title, script_results_a, script_results_b,	CODE
LOW	ndiff/ndiff.py	480	def script_result_diffs_to_dom_fragment(elem, script_results_a,	CODE
LOW	nselib/sslcert.lua	884	function getPrepareTLSWithoutReconnect(port)	CODE
LOW	zenmap/zenmapCore/NmapOptions.py	1209	def test_canonical_option_names(self):	CODE
LOW	zenmap/zenmapCore/NmapOptions.py	1478	def test_duplicate_input_handling(self):	CODE
LOW	zenmap/zenmapCore/Paths.py	81	def get_extra_executable_search_paths():	CODE
LOW	zenmap/zenmapCore/NetworkInventory.py	521	def test_no_external_modification(self):	CODE
LOW	zenmap/zenmapCore/NetworkInventory.py	548	def test_cancel_and_remove_scan(self):	CODE
LOW	zenmap/zenmapCore/SearchResult.py	540	def test_match_service_version(self):	CODE
LOW	zenmap/zenmapCore/ScriptMetadata.py	367	def get_script_args_from_file(f):	CODE
LOW	zenmap/zenmapCore/ScriptMetadata.py	402	def construct_library_arguments(self):	CODE
LOW	zenmap/zenmapCore/NmapParser.py	654	def get_formatted_finish_date(self):	CODE
LOW	zenmap/zenmapCore/NmapParser.py	873	def _parse_host_tcptssequence(self, attrs):	CODE
LOW⚡	zenmap/zenmapCore/NmapParser.py	1393	def test_consecutive_multiple_classes(self):	CODE
LOW⚡	zenmap/zenmapCore/NmapParser.py	1401	def test_empty_then_populated_match(self):	CODE
LOW⚡	zenmap/zenmapCore/NmapParser.py	1405	def test_populated_empty_populated_matches(self):	CODE
LOW⚡	zenmap/zenmapCore/NmapParser.py	1413	def test_legacy_direct_classes(self):	CODE
LOW	zenmap/zenmapCore/NmapParser.py	1451	def test_existing_xml_fixtures_roundtrip(self):	CODE
LOW	zenmap/radialnet/util/integration.py	268	def make_graph_from_nmap_parser(parser):	CODE
LOW	zenmap/radialnet/gui/ControlWidget.py	827	def __cell_toggle_data_method(self, column, cell, model, it, data):	CODE
LOW	zenmap/radialnet/gui/Image.py	74	def get_pixels_for_cairo_image_surface(pixbuf):	CODE
LOW	zenmap/radialnet/gui/NodeNotebook.py	570	def __create_sequences_widget(self, sequences):	STRING
LOW⚡	zenmap/radialnet/bestwidgets/boxes.py	71	def bw_pack_start_expand_fill(self, widget, padding=0):	CODE
LOW⚡	zenmap/radialnet/bestwidgets/boxes.py	76	def bw_pack_start_expand_nofill(self, widget, padding=0):	CODE
LOW⚡	zenmap/radialnet/bestwidgets/boxes.py	81	def bw_pack_start_noexpand_nofill(self, widget, padding=0):	CODE
LOW⚡	zenmap/radialnet/bestwidgets/boxes.py	91	def bw_pack_end_expand_nofill(self, widget, padding=0):	CODE
LOW⚡	zenmap/radialnet/bestwidgets/boxes.py	96	def bw_pack_end_noexpand_nofill(self, widget, padding=0):	CODE
LOW	zenmap/zenmapGUI/ScanHostsView.py	69	def treemodel_get_addrs_for_sort(model, iter):	CODE
LOW⚡	zenmap/zenmapGUI/NmapOutputProperties.py	245	def highlight_color_dialog_ok(self, widget, color_dialog):	CODE
LOW⚡	zenmap/zenmapGUI/NmapOutputProperties.py	250	def highlight_color_dialog_cancel(self, widget, color_dialog):	CODE
LOW⚡	zenmap/zenmapGUI/NmapOutputProperties.py	253	def highlight_color_dialog_close(self, widget, extra, color_dialog):	CODE
LOW	zenmap/zenmapGUI/OptionBuilder.py	82	def get_option_check_auxiliary_widget(option, ops, check):	CODE
LOW	zenmap/zenmapGUI/NmapOutputViewer.py	252	def replace_buffer_warning_message(self, message):	CODE
LOW	zenmap/zenmapGUI/NmapOutputViewer.py	275	def show_large_output_message(self):	CODE
LOW	zenmap/zenmapGUI/TopologyPage.py	153	def update_radialnet_unchecked(self):	STRING
LOW	zenmap/zenmapGUI/MainWindow.py	530	def _displayed_scan_change_cb(self, widget):	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	91	def text_buffer_insert_nsedoc(buf, nsedoc):	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	247	def script_list_timer_callback(self, process, callback):	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	277	def handle_initial_script_list_output(self, process):	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	322	def update_script_list_from_spec(self, spec):	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	338	def handle_update_script_list_output(self, process):	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	521	def set_script_from_selection(self):	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	646	def add_file_button_clicked_cb(self, button):	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	663	def remove_file_button_clicked_cb(self, button):	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	391	def _displayed_scan_change_cb(self, widget):	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	750	def service_selection_changed(self, widget):	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	755	def service_host_selection_changed(self, selection):	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	850	def set_multiple_service_host(self, service_list):	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	902	def change_to_ports_hosts_tab(self):	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	905	def change_to_nmap_output_tab(self):	CODE
LOW⚡	zenmap/zenmapGUI/ScanOpenPortsPage.py	405	def switch_port_to_list_store(self):	CODE
LOW⚡	zenmap/zenmapGUI/ScanOpenPortsPage.py	410	def switch_port_to_tree_store(self):	CODE
LOW⚡	zenmap/zenmapGUI/ScanOpenPortsPage.py	415	def switch_host_to_list_store(self):	CODE
LOW⚡	zenmap/zenmapGUI/ScanOpenPortsPage.py	420	def switch_host_to_tree_store(self):	CODE
LOW	zenmap/zenmapGUI/higwidgets/higspinner.py	170	def load_animated_from_lookup(self, icon_name=None):	CODE
LOW	zenmap/zenmapGUI/higwidgets/higspinner.py	202	def load_animated_from_filename(self, filename, size):	CODE
3 more matches not shown…

Synthetic Comment Markers6 hits · 68 pts

Severity	File	Line	Snippet	Context
HIGH⚡	libpcap/pcap-common.c	618	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	libpcap/pcap-common.c	625	* transport - https://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	libpcap/pcap-common.c	632	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT
HIGH⚡	libpcap/pcap/dlt.h	957	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	libpcap/pcap/dlt.h	964	* transport - https://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	libpcap/pcap/dlt.h	971	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT

Unused Imports67 hits · 66 pts

Severity	File	Line	Context
LOW	ncat/scripts/p0fme.py	3	CODE
LOW	zenmap/zenmapCore/NmapCommand.py	62	CODE
LOW	zenmap/zenmapCore/NmapCommand.py	64	CODE
LOW	zenmap/zenmapCore/Paths.py	69	CODE
LOW	zenmap/zenmapCore/UmitOptionParser.py	62	CODE
LOW	zenmap/zenmapCore/UmitDB.py	60	CODE
LOW	zenmap/zenmapCore/UmitConf.py	61	CODE
LOW	zenmap/zenmapCore/UmitConf.py	68	CODE
LOW	zenmap/zenmapCore/UmitConf.py	79	CODE
LOW	zenmap/zenmapCore/SearchResult.py	67	CODE
LOW	zenmap/zenmapCore/SearchResult.py	249	CODE
LOW	zenmap/zenmapCore/BasePaths.py	61	CODE
LOW	zenmap/zenmapCore/NmapParser.py	59	CODE
LOW	zenmap/zenmapCore/NmapParser.py	79	CODE
LOW	zenmap/radialnet/gui/SaveDialog.py	66	CODE
LOW	zenmap/radialnet/gui/ControlWidget.py	68	CODE
LOW	zenmap/radialnet/gui/LegendWindow.py	67	CODE
LOW	zenmap/radialnet/gui/NodeNotebook.py	68	CODE
LOW	zenmap/radialnet/bestwidgets/__init__.py	62	CODE
LOW	zenmap/radialnet/bestwidgets/textview.py	63	CODE
LOW	zenmap/radialnet/bestwidgets/comboboxes.py	62	CODE
LOW	zenmap/radialnet/bestwidgets/frames.py	62	CODE
LOW	zenmap/zenmapGUI/ScanHostsView.py	66	CODE
LOW	zenmap/zenmapGUI/NmapOutputProperties.py	64	CODE
LOW	zenmap/zenmapGUI/FileChoosers.py	65	CODE
LOW	zenmap/zenmapGUI/FileChoosers.py	67	CODE
LOW	zenmap/zenmapGUI/SearchWindow.py	66	CODE
LOW	zenmap/zenmapGUI/BugReport.py	67	CODE
LOW	zenmap/zenmapGUI/OptionBuilder.py	78	CODE
LOW	zenmap/zenmapGUI/CrashReport.py	72	CODE
LOW	zenmap/zenmapGUI/NmapOutputViewer.py	62	CODE
LOW	zenmap/zenmapGUI/NmapOutputViewer.py	64	CODE
LOW	zenmap/zenmapGUI/NmapOutputViewer.py	67	CODE
LOW	zenmap/zenmapGUI/Icons.py	62	CODE
LOW	zenmap/zenmapGUI/Icons.py	64	CODE
LOW	zenmap/zenmapGUI/ScanRunDetailsPage.py	69	CODE
LOW	zenmap/zenmapGUI/ProfileCombo.py	65	CODE
LOW	zenmap/zenmapGUI/SearchGUI.py	75	CODE
LOW	zenmap/zenmapGUI/About.py	78	CODE
LOW	zenmap/zenmapGUI/MainWindow.py	64	CODE
LOW	zenmap/zenmapGUI/MainWindow.py	94	CODE
LOW	zenmap/zenmapGUI/ScanToolbar.py	67	CODE
LOW	zenmap/zenmapGUI/ProfileEditor.py	77	CODE
LOW	zenmap/zenmapGUI/DiffCompare.py	66	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	97	CODE
LOW	zenmap/zenmapGUI/ScanOpenPortsPage.py	67	CODE
LOW	zenmap/zenmapGUI/ScanNmapOutputPage.py	72	CODE
LOW	zenmap/zenmapGUI/ScanScanListPage.py	67	CODE
LOW	zenmap/zenmapGUI/ScanHostDetailsPage.py	71	CODE
LOW	zenmap/zenmapGUI/higwidgets/gtkutils.py	71	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	69	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	70	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	71	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	72	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	73	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	74	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	75	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	76	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	77	CODE
LOW	zenmap/zenmapGUI/higwidgets/__init__.py	78	CODE
7 more matches not shown…

Excessive Try-Catch Wrapping42 hits · 49 pts

Severity	File	Line	Snippet	Context
LOW	ndiff/ndifftest.py	720	except Exception as e:	CODE
MEDIUM	ndiff/ndifftest.py	717	def test_well_formed(self):	CODE
LOW	zenmap/zenmapCore/RecentScans.py	70	except Exception:	CODE
LOW	zenmap/zenmapCore/NmapCommand.py	171	except Exception:	CODE
LOW	zenmap/zenmapCore/NmapCommand.py	178	except Exception:	CODE
LOW	zenmap/zenmapCore/TargetList.py	70	except Exception:	CODE
LOW	zenmap/zenmapCore/Paths.py	154	except Exception:	CODE
LOW⚡	zenmap/zenmapCore/UmitConfigParser.py	79	except Exception:	CODE
LOW⚡	zenmap/zenmapCore/UmitConfigParser.py	83	except Exception:	CODE
LOW⚡	zenmap/zenmapCore/UmitConfigParser.py	89	except Exception:	CODE
LOW	zenmap/zenmapCore/UmitConfigParser.py	119	except Exception as e:	CODE
LOW	zenmap/zenmapCore/NetworkInventory.py	579	except Exception:	CODE
LOW	zenmap/zenmapCore/UmitDB.py	73	except Exception:	CODE
LOW	zenmap/zenmapCore/UmitDB.py	165	except Exception:	CODE
LOW	zenmap/zenmapCore/UmitConf.py	160	except Exception:	CODE
LOW	zenmap/zenmapCore/UmitConf.py	211	except Exception:	CODE
LOW	zenmap/zenmapCore/UmitConf.py	218	except Exception:	CODE
LOW	zenmap/zenmapCore/UmitConf.py	441	except Exception:	CODE
MEDIUM	zenmap/zenmapCore/UmitConf.py	157	def get_converted_save_time(self):	CODE
MEDIUM	zenmap/zenmapCore/UmitConf.py	206	def _get_it(self, profile, attribute, fallback=None):	CODE
MEDIUM	zenmap/zenmapCore/UmitConf.py	221	def _set_it(self, profile, attribute, value=''):	CODE
LOW	zenmap/zenmapCore/SearchResult.py	446	except Exception as e:	CODE
LOW	zenmap/zenmapCore/SearchResult.py	484	except Exception:	CODE
LOW	zenmap/radialnet/gui/Application.py	137	except Exception as e:	CODE
LOW	zenmap/radialnet/gui/Toolbar.py	256	except Exception as e:	CODE
LOW	zenmap/zenmapGUI/ScanHostsView.py	173	except Exception:	CODE
MEDIUM	zenmap/zenmapGUI/ScanHostsView.py	169	def _remove_scrolled_child(self):	CODE
LOW	zenmap/zenmapGUI/NmapOutputViewer.py	257	except Exception:	CODE
LOW	zenmap/zenmapGUI/MainWindow.py	430	except Exception as e:	CODE
LOW	zenmap/zenmapGUI/MainWindow.py	557	except Exception as e:	CODE
LOW	zenmap/zenmapGUI/MainWindow.py	707	except Exception as ex:	CODE
LOW	zenmap/zenmapGUI/DiffCompare.py	203	except Exception as e:	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	235	except Exception as e:	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	250	except Exception:	CODE
MEDIUM	zenmap/zenmapGUI/ScriptInterface.py	247	def script_list_timer_callback(self, process, callback):	CODE
LOW	zenmap/zenmapGUI/App.py	81	except Exception:	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	510	except Exception as e:	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	547	except Exception as e:	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	579	except Exception:	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	596	except Exception as e:	CODE
LOW	zenmap/zenmapGUI/ScanNmapOutputPage.py	100	except Exception as e:	CODE
LOW	zenmap/install_scripts/windows/setup.sh	37	except Exception:	STRING

Deep Nesting48 hits · 48 pts

Severity	File	Line	Context
LOW	ndiff/ndifftest.py	734	CODE
LOW	ndiff/ndiff.py	480	CODE
LOW	ndiff/ndiff.py	1470	CODE
LOW	ndiff/ndiff.py	735	CODE
LOW	ndiff/ndiff.py	810	CODE
LOW	ndiff/ndiff.py	1039	CODE
LOW	ndiff/ndiff.py	1069	CODE
LOW	ndiff/ndiff.py	1157	CODE
LOW	ndiff/ndiff.py	1371	CODE
LOW	zenmap/zenmapCore/RecentScans.py	65	CODE
LOW	zenmap/zenmapCore/NmapCommand.py	152	CODE
LOW	zenmap/zenmapCore/TargetList.py	65	CODE
LOW	zenmap/zenmapCore/NmapOptions.py	166	CODE
LOW	zenmap/zenmapCore/NmapOptions.py	326	CODE
LOW	zenmap/zenmapCore/NmapOptions.py	565	CODE
LOW	zenmap/zenmapCore/NetworkInventory.py	84	CODE
LOW	zenmap/zenmapCore/NetworkInventory.py	162	CODE
LOW	zenmap/zenmapCore/NSEDocParser.py	87	CODE
LOW	zenmap/zenmapCore/SearchResult.py	314	CODE
LOW	zenmap/zenmapCore/ScriptMetadata.py	229	CODE
LOW	zenmap/zenmapCore/ScriptMetadata.py	131	CODE
LOW	zenmap/zenmapCore/ScriptMetadata.py	289	CODE
LOW	zenmap/zenmapCore/NmapParser.py	657	CODE
LOW	zenmap/zenmapCore/NmapParser.py	898	CODE
LOW	zenmap/zenmapCore/NmapParser.py	969	CODE
LOW	zenmap/zenmapCore/NmapParser.py	1075	CODE
LOW	zenmap/radialnet/core/XMLHandler.py	130	CODE
LOW	zenmap/radialnet/core/XMLHandler.py	166	CODE
LOW	zenmap/radialnet/core/Coordinate.py	168	CODE
LOW	zenmap/radialnet/util/integration.py	125	CODE
LOW	zenmap/radialnet/gui/RadialNet.py	216	CODE
LOW	zenmap/radialnet/gui/RadialNet.py	547	CODE
LOW	zenmap/radialnet/gui/RadialNet.py	569	CODE
LOW	zenmap/radialnet/gui/RadialNet.py	617	CODE
LOW	zenmap/radialnet/gui/RadialNet.py	812	CODE
LOW	zenmap/radialnet/gui/RadialNet.py	1241	CODE
LOW	zenmap/radialnet/gui/RadialNet.py	1418	CODE
LOW	zenmap/radialnet/gui/RadialNet.py	1697	CODE
LOW	zenmap/radialnet/gui/ControlWidget.py	856	CODE
LOW	zenmap/zenmapGUI/OptionBuilder.py	82	CODE
LOW	zenmap/zenmapGUI/SearchGUI.py	112	CODE
LOW	zenmap/zenmapGUI/SearchGUI.py	309	CODE
LOW	zenmap/zenmapGUI/MainWindow.py	806	CODE
LOW	zenmap/zenmapGUI/DiffCompare.py	343	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	91	CODE
LOW	zenmap/zenmapGUI/ScriptInterface.py	495	CODE
LOW	zenmap/zenmapGUI/ScanInterface.py	460	CODE
LOW	zenmap/zenmapGUI/ScanScanListPage.py	70	CODE

Redundant / Tautological Comments37 hits · 40 pts

Severity	File	Line	Snippet	Context
LOW	ltmain.sh	1710	# Check if any of the arguments is a wrapper script.	COMMENT
LOW	ltmain.sh	7179	# Loop over the list of objects to be linked.	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	379	# Check if we can use backslash as IFS='\' separator, and set	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	666	# Set func_arith_result to the result of evaluating TERMs.	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	690	# Set func_basename_result to FILE with everything up to and including	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	856	# Set func_len_result to the length of STRING. STRING may not	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	1074	# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	4294	# Check if any of the arguments is a wrapper script.	COMMENT
LOW	libdnet-stripped/config/ltmain.sh	10242	# Loop over the list of objects to be linked.	COMMENT
LOW	libpcre/ltmain.sh	379	# Check if we can use backslash as IFS='\' separator, and set	COMMENT
LOW	libpcre/ltmain.sh	654	# Set func_arith_result to the result of evaluating TERMs.	COMMENT
LOW	libpcre/ltmain.sh	678	# Set func_basename_result to FILE with everything up to and including	COMMENT
LOW	libpcre/ltmain.sh	844	# Set func_len_result to the length of STRING. STRING may not	COMMENT
LOW	libpcre/ltmain.sh	1062	# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.	COMMENT
LOW	libpcre/ltmain.sh	4159	# Check if any of the arguments is a wrapper script.	COMMENT
LOW	libpcre/ltmain.sh	10154	# Loop over the list of objects to be linked.	COMMENT
LOW	zenmap/zenmapCore/NetworkInventory.py	174	# Check if new_port is already present in old_host's ports	COMMENT
LOW	zenmap/zenmapCore/NetworkInventory.py	196	# Check if defunct_port is in ports	COMMENT
LOW	zenmap/zenmapCore/NetworkInventory.py	346	# Add the filename to the list of saved filenames	COMMENT
LOW	zenmap/zenmapCore/UmitDB.py	292	# Verify if data base exists and if it does have the required tables.	COMMENT
LOW	zenmap/zenmapCore/UmitConf.py	76	# Check if running on Maemo	COMMENT
LOW	zenmap/zenmapCore/SearchResult.py	144	# Check if the port is parsable, if not return False silently	COMMENT
LOW	zenmap/zenmapCore/SearchResult.py	253	# Check if we have any fuzzy operators ("~") in our string	COMMENT
LOW	zenmap/zenmapCore/SearchResult.py	321	# Check if they're parsable, if not return False silently	COMMENT
LOW	zenmap/zenmapGUI/SearchGUI.py	136	# Check if we have any dir: operators in our map, and if so, add them	COMMENT
LOW	zenmap/zenmapGUI/MainWindow.py	499	# Check if the selected filename is a directory. If not, we take	COMMENT
LOW	zenmap/zenmapGUI/DiffCompare.py	346	# Check if any old background processes have finished.	COMMENT
LOW	zenmap/zenmapGUI/ScriptInterface.py	286	# Check if any scripts were output; if not, Nmap is probably too old.	COMMENT
LOW	libz/os400/make.sh	66	# Set LINK to "YES" if the module has been compiled.	COMMENT
LOW	libssh2/ltmain.sh	379	# Check if we can use backslash as IFS='\' separator, and set	COMMENT
LOW	libssh2/ltmain.sh	666	# Set func_arith_result to the result of evaluating TERMs.	COMMENT
LOW	libssh2/ltmain.sh	690	# Set func_basename_result to FILE with everything up to and including	COMMENT
LOW	libssh2/ltmain.sh	856	# Set func_len_result to the length of STRING. STRING may not	COMMENT
LOW	libssh2/ltmain.sh	1074	# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.	COMMENT
LOW	libssh2/ltmain.sh	4171	# Check if any of the arguments is a wrapper script.	COMMENT
LOW	libssh2/ltmain.sh	10166	# Loop over the list of objects to be linked.	COMMENT
LOW	libssh2/os400/initscript.sh	142	# Set LINK to "YES" if the module has been compiled.	COMMENT

AI Slop Vocabulary14 hits · 32 pts

Severity	File	Line	Snippet	Context
MEDIUM	ltmain.sh	210	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	ltmain.sh	2719	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	ltmain.sh	6531	# This code stresses the "libraries are programs" paradigm to its	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	345	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	libdnet-stripped/config/ltmain.sh	5631	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	libpcre/ltmain.sh	345	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	libpcre/ltmain.sh	5475	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	libpcre/ltmain.sh	9453	# This code stresses the "libraries are programs" paradigm to its	COMMENT
MEDIUM	zenmap/zenmapCore/NmapOptions.py	5	# getopt_long_only_extras, which is like getopt_long_only with robust	COMMENT
MEDIUM	zenmap/zenmapCore/NmapOptions.py	39	# A primary design consideration was robust handling of unknown options. That	COMMENT
LOW	nping/nping-dev/test/test_nping.sh	1228	t PAYLOAD_12 "Test raw hex payload specification, specifying bogus hex data #9 (just pass empty quotes) Expected: error	CODE
MEDIUM	libssh2/ltmain.sh	345	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	libssh2/ltmain.sh	5487	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	libssh2/ltmain.sh	9465	# This code stresses the "libraries are programs" paradigm to its	COMMENT

AI Response Leakage4 hits · 30 pts

Severity	File	Line	Snippet	Context
HIGH	zenmap/zenmapCore/NmapOptions.py	59	# relative order when rendered again to output. In this example "-x -e eth0"	COMMENT
HIGH	libz/contrib/dotzlib/DotZLib/GZipStream.cs	263	/// <remarks>In this implementation, this method does nothing. This is because excessive	COMMENT
HIGH	libz/contrib/dotzlib/DotZLib/GZipStream.cs	273	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT
HIGH	libz/contrib/dotzlib/DotZLib/GZipStream.cs	290	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT

Modern Structural Boilerplate14 hits · 14 pts

Severity	File	Line	Snippet	Context
LOW	zenmap/radialnet/__init__.py	59	__all__ = ["bestwidgets", "core", "gui", "util"]	CODE
LOW	zenmap/zenmapGUI/higwidgets/higdialogs.py	65	__all__ = ['HIGDialog', 'HIGAlertDialog']	CODE
LOW	zenmap/zenmapGUI/higwidgets/higspinner.py	65	__all__ = ['HIGSpinner']	CODE
LOW	zenmap/zenmapGUI/higwidgets/higlabels.py	65	__all__ = [	CODE
LOW	zenmap/zenmapGUI/higwidgets/higprogressbars.py	65	__all__ = ['HIGLabeledProgressBar']	CODE
LOW	zenmap/zenmapGUI/higwidgets/higboxes.py	65	__all__ = ['HIGHBox', 'HIGVBox']	CODE
LOW	zenmap/zenmapGUI/higwidgets/gtkutils.py	65	__all__ = ['gtk_version_major', 'gtk_version_minor', 'gtk_version_release',	CODE
LOW	zenmap/zenmapGUI/higwidgets/higbuttons.py	65	__all__ = ['HIGButton', 'HIGToggleButton']	CODE
LOW	zenmap/zenmapGUI/higwidgets/higframe.py	65	__all__ = ['HIGFrame']	CODE
LOW	zenmap/zenmapGUI/higwidgets/higtextviewers.py	65	__all__ = ['HIGTextView']	CODE
LOW	zenmap/zenmapGUI/higwidgets/higtables.py	65	__all__ = ['HIGTable']	CODE
LOW	zenmap/zenmapGUI/higwidgets/higlogindialogs.py	65	__all__ = ['HIGLoginDialog']	CODE
LOW	zenmap/zenmapGUI/higwidgets/higscrollers.py	65	__all__ = ['HIGScrolledWindow']	CODE
LOW	zenmap/zenmapGUI/higwidgets/higexpanders.py	65	__all__ = ['HIGExpander']	CODE

Slop Phrases5 hits · 9 pts

Severity	File	Line	Snippet	Context
MEDIUM	nselib/http.lua	83	-- Each element is a table containing the HTTP result, as discussed above.	CODE
LOW	nselib/http.lua	2803	--@param pattern The pattern we're searching for. Don't forget to escape '-',	CODE
MEDIUM	docs/refguide.xml	1998	<para>Enables version detection, as discussed above.	CODE
MEDIUM	docs/refguide.xml	2186	<para>Enables OS detection, as discussed above.	CODE
MEDIUM	docs/refguide.xml	3802	directed to the given filename. As discussed above, this	CODE

Example Usage Blocks1 hit · 2 pts

Severity	File	Line	Snippet	Context
LOW	libz/contrib/minizip/skipset.h	20	// Example usage:	COMMENT

Verbosity Indicators1 hit · 2 pts

Severity	File	Line	Snippet	Context
LOW	libssh2/src/session.h	69	* For functions that returns a pointer, we need to check if the API is	COMMENT

nmap/nmap

Open-Source Code Quality, Security and Technical Debt Review