1.7

Adjusted Signal

1.7

Raw Pattern Score

100%

Time Factor

2026-10-31

Last Push

10.7K

Stars

C++

Language

10.1M

Lines of Code

23.6K

Files

17.6K

Pattern Hits

2026-10-31

Scan Date

0.00

HC Hit Rate

Risk Review · Payload v1

Use each vector to guide manual verification of the underlying findings.

Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.

Cognitive Ownership Risk 7.8/100 · LOW

Can maintainers explain intent, assumptions, and trade-offs? 17257 finding(s).

Hallucinated Dependency & Supply Chain Risk 0.1/100 · LOW

Are imports declared and package/API names verified? 65 finding(s).

Agent Over-Engineering Ratio 0.3/100 · LOW

Are wrappers, guards, and repeated structures necessary? 315 finding(s).

PR Review Velocity Impact 8.8/100 · LOW

Which changes need focused human review? 17613 finding(s).

What These Metrics Mean

Adjusted Signal: Legacy pattern score normalized per 1,000 scanned lines and multiplied by the repository-level time factor. It is not an estimate of AI authorship.
Raw Pattern Score: Sum of severity- and context-weighted pattern findings before applying the time factor.
Time Factor: A coarse multiplier based on repository last-push metadata. It does not identify when individual code was written.
Pattern Hits: Count of configured pattern findings. Review each location and surrounding code before acting.
HC Hit Rate: High- and critical-severity findings per scanned file. Severity is a configured detector weight, not proof of a vulnerability or authorship.
Lines / Files: Scan coverage denominators used by the legacy normalized score.

Pattern-Signal History

This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.

Severity Breakdown

Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.

CRITICAL 0HIGH 33MEDIUM 388LOW 17192

Directory Score Breakdown

This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.

Pattern Findings

The scanner identified 17613 distinct pattern matches across 20 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.

Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.

Over-Commented Block16851 hits · 15493 pts

Severity	File	Line	Snippet	Context
LOW	…ject/app/src/main/java/org/libsdl/app/SDLActivity.java	1021	// to change size and should wait for surfaceChanged() before we return, so the size	COMMENT
LOW	…ject/app/src/main/java/org/libsdl/app/SDLActivity.java	1481	// Log.v("SDL", "key down: " + keyCode + ", deviceId = " + deviceId + ", source = " + source);	COMMENT
LOW	bgfx/chains/depixelize.json	1	// license:MIT	COMMENT
LOW	bgfx/chains/hlsl.json	1	// license:BSD-3-Clause	COMMENT
LOW	bgfx/chains/hlsl.json	21	"sliders": [	COMMENT
LOW	bgfx/chains/hlsl.json	41	//	COMMENT
LOW	bgfx/chains/hlsl.json	121	{ "type": "float", "name": "round_corner", "text": "Rounded Corner Amount", "default": 0.05, "max": 2.00, "min	COMMENT
LOW	bgfx/chains/hlsl.json	141	// value: Any integer value.	COMMENT
LOW	bgfx/chains/hlsl.json	161	// bilinear (optional): Whether or not to apply bilinear filtering to this render target.	COMMENT
LOW	bgfx/chains/hlsl.json	221	// clear (optional): How to clear the output target for this particular entry.	COMMENT
LOW	bgfx/chains/hlsl.json	241	// condition (optional): The disabler is active when the named slider is either equal or not equal to the reference	COMMENT
LOW	bgfx/chains/hlsl.json	261	{ "type": "slider", "condition": "equal", "combine": "or", "name": "ntsc", "value": 0 }	COMMENT
LOW	bgfx/chains/hlsl.json	281	{ "uniform": "u_b_value", "slider": "b_value" },	COMMENT
LOW	bgfx/chains/hlsl.json	301	//	COMMENT
LOW	bgfx/effects/misc/blit.json	1	// license:BSD-3-Clause	COMMENT
LOW	bgfx/effects/misc/blit.json	41	},	COMMENT
LOW	bgfx/effects/misc/blit.json	61	// values: true, false	COMMENT
LOW	bgfx/effects/misc/blit.json	81	// code if they are used by the shader. These names are:	COMMENT
LOW	bgfx/effects/misc/blit.json	101	// The dimensions, in pixels, of the texture in input pair N. Starts at 0.	COMMENT
LOW	bgfx/effects/misc/blit_palette16.json	1	// license:BSD-3-Clause	COMMENT
LOW	bgfx/effects/misc/blit_palette16.json	41	},	COMMENT
LOW	bgfx/effects/misc/blit_palette16.json	61	// values: true, false	COMMENT
LOW	bgfx/effects/misc/blit_palette16.json	81	// code if they are used by the shader. These names are:	COMMENT
LOW	bgfx/effects/misc/blit_palette16.json	101	// The dimensions, in pixels, of the texture in input pair N. Starts at 0.	COMMENT
LOW	bgfx/effects/pillarbox_right_horizontal/offset_sat.json	1	// license:BSD-3-Clause	COMMENT
LOW	bgfx/effects/default/blit.json	1	// license:BSD-3-Clause	COMMENT
LOW	bgfx/effects/default/blit.json	21		COMMENT
LOW	bgfx/effects/default/blit.json	41	// default: false	COMMENT
LOW	bgfx/effects/default/blit.json	61	// "u_view_dims"	COMMENT
LOW	bgfx/effects/default/blit.json	81	// Valid values: x	COMMENT
LOW	bgfx/effects/pillarbox_left_horizontal/offset_sat.json	1	// license:BSD-3-Clause	COMMENT
LOW	bgfx/effects/unfiltered/blit.json	1	// license:BSD-3-Clause	COMMENT
LOW	bgfx/effects/unfiltered/blit.json	41	},	COMMENT
LOW	bgfx/effects/unfiltered/blit.json	61	// values: true, false	COMMENT
LOW	bgfx/effects/unfiltered/blit.json	81	// code if they are used by the shader. These names are:	COMMENT
LOW	bgfx/effects/unfiltered/blit.json	101	// The dimensions, in pixels, of the texture in input pair N. Starts at 0.	COMMENT
LOW	bgfx/effects/pillarbox_left_vertical/offset_sat.json	1	// license:BSD-3-Clause	COMMENT
LOW	bgfx/effects/hlsl/blit.json	1	// license:BSD-3-Clause	COMMENT
LOW	bgfx/effects/hlsl/blit.json	41	},	COMMENT
LOW	bgfx/effects/hlsl/blit.json	61	// values: true, false	COMMENT
LOW	bgfx/effects/hlsl/blit.json	81	// code if they are used by the shader. These names are:	COMMENT
LOW	bgfx/effects/hlsl/blit.json	101	// The dimensions, in pixels, of the texture in input pair N. Starts at 0.	COMMENT
LOW	bgfx/effects/pillarbox_right_vertical/offset_sat.json	1	// license:BSD-3-Clause	COMMENT
LOW	tests/main.cpp	1	#define CATCH_CONFIG_MAIN	COMMENT
LOW	docs/source/conf.py	1	# -- coding: utf-8 --	COMMENT
LOW	docs/source/conf.py	61	# The version info for the project you're documenting, acts as replacement for	COMMENT
LOW	docs/source/conf.py	81	# directories to ignore when looking for source files.	COMMENT
LOW	docs/source/conf.py	101	# A list of ignored prefixes for module index sorting.	COMMENT
LOW	docs/source/conf.py	121		COMMENT
LOW	docs/source/conf.py	141	#html_static_path = ['_static']	COMMENT
LOW	docs/source/conf.py	161		COMMENT
LOW	docs/source/conf.py	181	# contain a <link> tag referring to it. The value of this option must be the	COMMENT
LOW	docs/source/conf.py	201	# Additional stuff for the LaTeX preamble.	COMMENT
LOW	ini/examples/bt601-525.ini	1	# Example for BT.601 525-line Color Space	COMMENT
LOW	ini/examples/p35.ini	1	# P35 Phosphor	COMMENT
LOW	ini/examples/p4.ini	1	# P4 Phosphor	COMMENT
LOW	ini/examples/bt601-625.ini	1	# Example for BT.601 625-line Color Space	COMMENT
LOW	ini/examples/p7.ini	1	# P7 Phosphor	COMMENT
LOW	ini/examples/p55.ini	1	# P55 Phosphor	COMMENT
LOW	ini/examples/p2.ini	1	# P2 Phosphor	COMMENT
16791 more matches not shown…

Decorative Section Separators242 hits · 538 pts

Severity	File	Line	Snippet	Context
MEDIUM	…3rdparty/iconfontheaders/GenerateIconFontCppHeaders.py	4	#------------------------------------------------------------------------------	COMMENT
MEDIUM	…3rdparty/iconfontheaders/GenerateIconFontCppHeaders.py	32	#------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	…3rdparty/iconfontheaders/GenerateIconFontCppHeaders.py	58	#------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	…3rdparty/iconfontheaders/GenerateIconFontCppHeaders.py	66	#------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	…3rdparty/iconfontheaders/GenerateIconFontCppHeaders.py	71	#------------------------------------------------------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	169	# ----------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	178	# --------------------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	480	# -------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	529	# ---------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	575	# ----------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	598	# --------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	622	# ------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	646	# ------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	679	# -------------------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	691	# --------------------------------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	712	# ----------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	731	# --------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	740	# ------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	776	# -----------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	789	# -----------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	801	# -----------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	812	# ---------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	838	# ---------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	886	# -------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	924	# ------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1014	# --------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1030	# --------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1095	# --------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1147	# -------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1177	# ---------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1207	# -----------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1232	# ------------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1261	# ----------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1282	# -------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1295	# -----------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1308	# ----------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1333	# -----------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1350	# ---------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1483	# -----------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1495	# ---------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1512	# ------------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1523	# ---------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1625	# ---------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1648	# --------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1672	# ---------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1773	# ------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1804	# ----------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1832	# ------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1845	# ------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1880	# -----------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1906	# ----------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1919	# ------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1939	# ------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1984	# ----------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2004	# -------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2083	# ---------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2100	# ---------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2122	# -------------------------------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2134	# -----------	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2154	# -------------	COMMENT
182 more matches not shown…

Self-Referential Comments68 hits · 160 pts

Severity	File	Line	Snippet	Context
MEDIUM	docs/source/conf.py	6	# This file is execfile()d with the current directory set to its containing dir.	COMMENT
MEDIUM	3rdparty/benchmark/mingw.py	289	# Create the logger	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	1402	# This file is a library for parsing options in your shell scripts along	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2502	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2512	# This function implements the same check as func_lalib_p without	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2535	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2545	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2570	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	2710	# Create a libtool object file (analogous to a ".la" file),	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	7472	# Create the object directory.	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	10145	# Create the old-style object.	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	10165	# Create an invalid libtool object if no PIC, so that we don't	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	77	# This file is dual licensed under the terms of the MIT license	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	1541	# This file is dual licensed under the terms of the MIT license	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	1559	# This file is a library for parsing options in your shell scripts along	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	2807	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	2817	# This function implements the same check as func_lalib_p without	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	2840	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	2850	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	2875	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	3015	# Create a libtool object file (analogous to a ".la" file),	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	7948	# Create the object directory.	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	10529	# Create the old-style object.	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	10549	# Create an invalid libtool object if no PIC, so that we don't	COMMENT
MEDIUM	3rdparty/utf8proc/data/Manifest.toml	1	# This file is machine-generated - editing it directly is not advised	COMMENT
MEDIUM	3rdparty/zlib/os400/make.sh	164	# Create the OS/400 library if it does not exist.	COMMENT
MEDIUM	3rdparty/zlib/os400/make.sh	172	# Create the DOCS source file if it does not exist.	COMMENT
MEDIUM	3rdparty/zlib/os400/make.sh	195	# Create the OS/400 source program file for the C header files.	COMMENT
MEDIUM	3rdparty/zlib/os400/make.sh	206	# Create the IFS directory for the C header files.	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	1402	# This file is a library for parsing options in your shell scripts along	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	2594	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	2604	# This function implements the same check as func_lalib_p without	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	2627	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	2637	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	2662	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	2802	# Create a libtool object file (analogous to a ".la" file),	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	7570	# Create the object directory.	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	10249	# Create the old-style object.	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	10269	# Create an invalid libtool object if no PIC, so that we don't	COMMENT
MEDIUM	3rdparty/flac/test/generate_streams.sh	7	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/flac/test/test_metaflac.sh	7	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/flac/test/test_seeking.sh	7	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/flac/test/test_grabbag.sh	7	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/flac/test/test_replaygain.sh	7	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/flac/test/test_compression.sh	6	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/flac/test/test_streams.sh	7	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/flac/test/test_flac.sh	7	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/flac/test/test_libFLAC.sh	7	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/flac/test/test_libFLAC++.sh	7	# This file is part the FLAC project. FLAC is comprised of several	COMMENT
MEDIUM	3rdparty/zstd/tests/gzip/init.cfg	1	# This file is sourced by init.sh, before its initialization.	COMMENT
MEDIUM	3rdparty/zstd/tests/gzip/init.sh	136	# The following code attempts to find a shell with support for these features.	COMMENT
MEDIUM	3rdparty/zstd/tests/gzip/init.sh	451	# Create an alias, FOO, for each FOO.exe in this directory.	COMMENT
MEDIUM	3rdparty/zstd/tests/gzip/init.sh	495	# Create a temporary directory, much like mktemp -d does.	COMMENT
MEDIUM	3rdparty/zstd/tests/gzip/help-version.sh	147	# Create a file in the current directory, not in $TMPDIR.	COMMENT
MEDIUM	3rdparty/zstd/tests/gzip/test-driver.sh	26	# This file is maintained in Automake, please report	COMMENT
MEDIUM	3rdparty/portaudio/ltmain.sh	1229	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/portaudio/ltmain.sh	1240	# This function implements the same check as func_lalib_p without	COMMENT
MEDIUM	3rdparty/portaudio/ltmain.sh	1263	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/portaudio/ltmain.sh	1272	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	3rdparty/portaudio/ltmain.sh	1297	# This function is only a basic sanity check; it will hardly flush out	COMMENT
8 more matches not shown…

AI Slop Vocabulary51 hits · 140 pts

Severity	File	Line	Snippet	Context
MEDIUM	…oject/app/src/main/java/org/libsdl/app/SDLSurface.java	280	// if we are. We'll leverage our existing mouse motion listener	COMMENT
MEDIUM	3rdparty/sol2/sol/sol.hpp	3012	// Definitely 5.0	COMMENT
LOW⚡	3rdparty/bgfx/examples/39-assao/cs_assao_generate_q.sh	38	#define SSAO_TILT_SAMPLES_ENABLE_AT_QUALITY_PRESET (99) // to disable simply set to 99 or si	COMMENT
LOW⚡	3rdparty/bgfx/examples/39-assao/cs_assao_generate_q.sh	41	#define SSAO_HALOING_REDUCTION_ENABLE_AT_QUALITY_PRESET (1) // to disable simply set to 99 or si	COMMENT
LOW⚡	3rdparty/bgfx/examples/39-assao/cs_assao_generate_q.sh	44	#define SSAO_NORMAL_BASED_EDGES_ENABLE_AT_QUALITY_PRESET (2) // to disable simply set to 99 or si	COMMENT
LOW⚡	3rdparty/bgfx/examples/39-assao/cs_assao_generate_q.sh	47	#define SSAO_DETAIL_AO_ENABLE_AT_QUALITY_PRESET (1) // whether to use DetailAOStrength;	COMMENT
MEDIUM	3rdparty/bgfx/examples/common/shaderlib.sh	376	// https://web.archive.org/web/20190411181934/http://the-witness.net/news/2012/02/seamless-cube-map-filtering/	COMMENT
MEDIUM	3rdparty/bgfx/3rdparty/spirv-cross/spirv_glsl.cpp	301	// Sanity check the iteration count to be robust against a certain class of bugs where	COMMENT
MEDIUM	3rdparty/bgfx/3rdparty/spirv-cross/spirv_glsl.cpp	10427	// Essentially, we can only remove one set of swizzles, since that's what we have control over ...	COMMENT
MEDIUM	3rdparty/bgfx/3rdparty/spirv-cross/spirv_glsl.cpp	10669	// We can look at result type which is more robust.	COMMENT
MEDIUM	3rdparty/bgfx/3rdparty/spirv-cross/spirv_cross.cpp	3741	// Essentially a map of block -> { variables accessed in the basic block }	COMMENT
MEDIUM	3rdparty/bgfx/3rdparty/spirv-cross/spirv_hlsl.cpp	1692	// Sort input and output variables based on, from more robust to less robust:	COMMENT
MEDIUM	…3rdparty/spirv-tools/include/spirv-tools/optimizer.hpp	807	// Creates a graphics robust access pass.	COMMENT
MEDIUM	…dparty/bgfx/3rdparty/spirv-tools/source/diagnostic.cpp	92	case SPV_REQUESTED_TERMINATION: // Essentially success.	CODE
MEDIUM	…party/bgfx/3rdparty/spirv-tools/source/opt/ir_loader.h	32	// libspirv.h so that we can leverage the syntax checks implemented behind it.	COMMENT
MEDIUM	…dparty/bgfx/3rdparty/spirv-tools/source/opt/ccp_pass.h	62	// CCP lattice. Essentially, if all the operands in \|phi\| have the same	COMMENT
MEDIUM	…arty/spirv-tools/source/opt/inst_bindless_check_pass.h	80	// These instrumentation functions utilize GenDebugDirectRead() to read data	COMMENT
MEDIUM	…arty/spirv-tools/source/opt/inst_bindless_check_pass.h	85	// These instrumentation functions utilize GenDebugStreamWrite() to write its	COMMENT
MEDIUM	3rdparty/bgfx/3rdparty/glslang/SPIRV/GlslangToSpv.cpp	4854	// TODO: It would be more robust to do a full recursive verification of the types satisfying SPIR-V rules.	COMMENT
MEDIUM	…rty/glslang/glslang/MachineIndependent/ParseHelper.cpp	7830	// for the parameter to the constructor (passed to this function). Essentially, it converts	COMMENT
MEDIUM	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	8539	// for the parameter to the constructor (passed to this function). Essentially, it converts	COMMENT
MEDIUM	3rdparty/bgfx/3rdparty/dear-imgui/imgui.cpp	6310	// FIXME: Essentially we want to restrict manual resizing to WindowMinSize+Decoration, and allow api resizing to be	COMMENT
MEDIUM	…rty/glsl-optimizer/src/glsl/ir_print_metal_visitor.cpp	977	// take precision from it. This isn't fully robust now, but oh well.	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	331	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	5227	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	3rdparty/libjpeg/ltmain.sh	9167	# This code stresses the "libraries are programs" paradigm to its	COMMENT
MEDIUM	3rdparty/asmjit/asmjit/core/emitter.h	134	//! often. To make the experience of using AsmJit seamless it offers validation features that can be controlled	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	345	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	3rdparty/expat/conftools/ltmain.sh	5631	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	3rdparty/bimg/3rdparty/tinyexr/tinyexr.h	1554	// TODO(syoyo): Add more robust out-of-bounds check in `rleUncompress`.	COMMENT
MEDIUM	3rdparty/asio/src/examples/cpp11/porthopper/client.cpp	73	// Time to switch to a new socket. To ensure seamless handover we will	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	331	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	5319	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	3rdparty/flac/ltmain.sh	9271	# This code stresses the "libraries are programs" paradigm to its	COMMENT
MEDIUM	3rdparty/portaudio/ltmain.sh	397	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	3rdparty/portaudio/ltmain.sh	3852	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	3rdparty/portaudio/ltmain.sh	7681	# This code stresses the "libraries are programs" paradigm to its	COMMENT
MEDIUM	src/mame/pc/pangofun.cpp	279	ROM_LOAD16_BYTE( "bank2.u13", 0x200001, 0x80000, BAD_DUMP CRC(504bf849) SHA1(13a184ec9e176371808938015111f8918cb4df7d)	CODE
MEDIUM	src/mame/misc/ecoinfr.cpp	1710	//These look more like some variant of Astra Gaming hardware than the MAB PCB, but I can't be sure. Certainly they don't	COMMENT
MEDIUM	src/mame/misc/3do_madam.cpp	1308	// Essentially similar as above minus that we already have a source pixel	COMMENT
MEDIUM	src/mame/sega/saturn.cpp	312	// Essentially clears?	COMMENT
MEDIUM	src/mame/tvgames/monkey_king_3b.cpp	205	// Definitely not correct, but toggling somehow keeps things moving	COMMENT
MEDIUM	src/mame/igs/igs036crypt.cpp	314	// while simple, seems to be pretty robust, so few errors should be expected,	COMMENT
MEDIUM	src/mame/nec/pce_cd.cpp	539	// Definitely not here, breaks jleagt94, iganin, macr2036 "press RUN button" prompt	COMMENT
MEDIUM	src/mame/namco/namcos12_cdxa.cpp	278	// Definitely is cs1 but hooking it up breaks the CD drive state seemingly due to timing issues.	COMMENT
MEDIUM	src/mame/kurzweil/krz2000.cpp	349	// Essentially, the 68k's second built-in serial port runs at 31250Hz, which is MIDI baud rate,	COMMENT
MEDIUM	src/lib/formats/ap2_dsk.cpp	70	// if true, use the old, not as robust logic for choosing which copy of a decoded sector to write	COMMENT
MEDIUM	src/devices/video/axell_ag1.cpp	1406	// seamless (the backgrounds are tiled from small cells)	COMMENT
MEDIUM	src/devices/bus/nscsi/pc8801_30.cpp	206	// Definitely not here, breaks jleagt94, iganin, macr2036 "press RUN button" prompt	COMMENT
MEDIUM	src/devices/machine/generalplus_gpl162xx_soc_video.cpp	1086	// where does -19 come from? needed for raster on paccon xevious to fire at correct line for bg scrolling to be seamle	COMMENT
MEDIUM	src/devices/sound/ymz770.cpp	283	// phrase transition is seamless most of the time, but AMM buffer 'contamination' should not be noticeable	COMMENT

Synthetic Comment Markers15 hits · 88 pts

Severity	File	Line	Snippet	Context
HIGH	3rdparty/bgfx/3rdparty/dear-imgui/imgui_draw.cpp	2843	const ImWchar* SrcRanges; // Ranges as requested by user (user is allowed to request too much, e.g. 0x	CODE
HIGH	…lzma/CS/7zip/Compress/LzmaAlone/Properties/Settings.cs	3	// This code was generated by a tool.	COMMENT
HIGH	…zma/CS/7zip/Compress/LzmaAlone/Properties/Resources.cs	3	// This code was generated by a tool.	COMMENT
HIGH	src/emu/debug/debugcpu.cpp	1913	// if we need to skip additional instructions, advance as requested	COMMENT
HIGH	src/emu/debug/debugcpu.cpp	2137	// if we need to skip additional instructions, advance as requested	COMMENT
HIGH	src/mame/misc/crospuzl.cpp	389	ROM_LOAD( "ds2401.bin", 0x00, 0x08, BAD_DUMP CRC(59aa97e0) SHA1(0bd57a57f7274a088bea051cbf9c4c8a02a9ff83) ) // AI-gener	CODE
HIGH	src/mame/misc/tjf_vr0.cpp	1319	ROM_LOAD( "at88sc153.bin", 0x000, 0x100, BAD_DUMP CRC(b8482d63) SHA1(0c43c82b556c01ef4852eb26141913fe28c52cf6) ) // AI-	CODE
HIGH	src/mame/misc/tjf_vr0.cpp	1361	ROM_LOAD( "at88sc153.bin", 0x000, 0x100, BAD_DUMP CRC(e062b61b) SHA1(fa77147fb8a4b48d253de815afec397082b53ff0) ) // AI-	CODE
HIGH	src/mame/misc/tjf_vr0.cpp	1364	ROM_LOAD( "nvram.bin", 0x0000, 0x2000, BAD_DUMP CRC(e36b21e0) SHA1(9a2d4cefc9c0dbc829b72893a002fd73a7ea2a06) ) // AI-ge	CODE
HIGH	src/mame/misc/tjf_vr0.cpp	1378	ROM_LOAD( "at88sc153.bin", 0x000, 0x100, BAD_DUMP CRC(456e82cf) SHA1(f16b213bb45894cfabab570e9c69fd42281f2551) ) // AI-	CODE
HIGH	src/mame/misc/tjf_vr0.cpp	1393	ROM_LOAD( "at88sc153.bin", 0x000, 0x100, BAD_DUMP CRC(3ad5e485) SHA1(c8b63cd6b2d843b7274ffbd0281edaec7f158c01) ) // AI-	CODE
HIGH	src/mame/misc/tjf_vr0.cpp	1396	ROM_LOAD( "nvram.bin", 0x0000, 0x2000, BAD_DUMP CRC(e36b21e0) SHA1(9a2d4cefc9c0dbc829b72893a002fd73a7ea2a06) ) // AI-ge	CODE
HIGH	src/mame/misc/tjf_vr0.cpp	1412	ROM_LOAD( "at88sc153.bin", 0x000, 0x100, BAD_DUMP CRC(456e82cf) SHA1(f16b213bb45894cfabab570e9c69fd42281f2551) ) // AI-	CODE
HIGH	src/mame/misc/tjf_vr0.cpp	1427	ROM_LOAD( "zones.bin", 0x000, 0x100, BAD_DUMP CRC(c46bac53) SHA1(35bfd1468b6b405551830987867a74274adccdd8) ) // AI-gene	CODE
HIGH	src/devices/sound/swp30.cpp	3669	// Clamp/saturate as requested	COMMENT

TODO Padding57 hits · 81 pts

Severity	File	Line	Snippet	Context
LOW	…rdparty/spirv-tools/source/val/validate_annotation.cpp	285	// TODO: Add validations for all decorations.	COMMENT
LOW	…rdparty/spirv-tools/source/val/validate_annotation.cpp	300	// TODO: Add validations for these decorations.	COMMENT
LOW	…rdparty/spirv-tools/source/val/validate_extensions.cpp	2817	// TODO: Add validation rules for remaining cases as well.	COMMENT
LOW	…rdparty/spirv-tools/source/val/validate_extensions.cpp	3360	// TODO: Add validation rules for remaining cases as well.	COMMENT
LOW	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	190	// TODO: implement.	COMMENT
LOW	3rdparty/bgfx/src/renderer_webgpu.h	530	uint32_t m_frameNum; // TODO: implement (currently stays 0)	CODE
LOW	3rdparty/bgfx/src/renderer_mtl.h	1154	uint32_t m_frameNum; // TODO: implement (currently stays 0)	CODE
LOW	src/mame/pc/pc_t1t.cpp	1178	// TODO: implement PG17 and VPG17 bits when 256K VRAM addressing is understood	COMMENT
LOW	src/mame/pc/teradrive.cpp	550	// TODO: implement bus conflict for 0x40'0000,0x7f'ffff area (if expansion port attached)	COMMENT
LOW	src/mame/acorn/belatra.cpp	113	map(0x00000000, 0x001fffff).rom().region("maincpu", 0x000000); // TODO: implement this as proper flash ROM device	CODE
LOW	src/mame/acorn/aa310.cpp	1132	// TODO: implement A500 keyboard, uses M6500/1 MCU	COMMENT
LOW	src/mame/atari/antic.cpp	2253	// TODO: implement GTIA 9++ Mode	COMMENT
LOW	src/mame/dynax/royalmah.cpp	4280	// TODO: implement extra sound chips. Z80 ROM is scrambled.	COMMENT
LOW	src/mame/ice/calchase.cpp	162	// TODO: implement me once conversion to PCI kicks in	COMMENT
LOW	src/mame/ice/lethalj.cpp	812	// TODO: implement steering wheel properly, identify ticket, identify extra button	COMMENT
LOW	src/mame/olivetti/m20.cpp	891	ROM_START(m44) // TODO: implement different hardware. Split to another driver?	CODE
LOW	src/mame/konami/moo.cpp	430	// TODO: implement sprite dma in k053246_k053247_k055673.cpp	COMMENT
LOW	src/mame/konami/xexex.cpp	412	// TODO: implement sprite dma in k053246_k053247_k055673.cpp	COMMENT
LOW	src/mame/konami/rungun.cpp	474	// TODO: implement sprite dma in k053246_k053247_k055673.cpp	COMMENT
LOW	src/mame/konami/gijoe.cpp	359	// TODO: implement sprite dma in k053246_k053247_k055673.cpp	COMMENT
LOW	src/mame/konami/simpsons.cpp	604	// TODO: implement sprite dma in k053246_k053247_k055673.cpp	COMMENT
LOW	src/mame/konami/vendetta.cpp	571	// TODO: implement sprite dma in k053246_k053247_k055673.cpp	COMMENT
LOW	src/mame/psion/mc600.cpp	483	m_asic2->read_pd_cb().set([this]() { m_rtc32 ^= 1; return m_rtc32 << 6; }); // TODO: implement RTC32 output from ASIC3	CODE
LOW	src/mame/sord/m5.cpp	1351	//TODO: implement switch to enable this hack	COMMENT
LOW	src/mame/amiga/amigaaga.cpp	673	// TODO: implement for ham and dualpf, below	COMMENT
LOW	src/mame/oberheim/matrix6.cpp	193	// TODO: implement.	COMMENT
LOW	src/mame/oberheim/matrix6.cpp	198	// TODO: implement.	COMMENT
LOW	src/mame/oberheim/xpander.cpp	1020	const u8 d2 = 1; // TODO: implement.	CODE
LOW	src/mame/oberheim/xpander_vb.cpp	144	.channel_a = nullptr, // TODO: implement.	CODE
LOW	src/mame/nec/pc88va_v.cpp	1216	// TODO: implement OFX (different than the other modes, unused by all known SW dumps)	COMMENT
LOW	src/mame/xerox/notetaker.cpp	842	m_ep_cpu->set_disable(); // TODO: implement the cpu control bits so this doesn't execute garbage/zeroes before its firm	CODE
LOW	src/mame/taito/wyvernf0.cpp	645	// TODO: implement bottom speaker routing	COMMENT
LOW	src/mame/sharp/x1twin.cpp	128	PORT_START("IOSYS") //TODO: implement front-panel DIP-SW here	CODE
LOW	src/mame/sony/news_68k_iop.cpp	616	// TODO: implement AST (Asynchronous System Trap)	COMMENT
LOW	src/devices/video/wd90c26.cpp	33	// TODO: implement the extra unlocks	COMMENT
LOW	src/devices/video/pc_vga_tseng.cpp	260	// TODO: implement KEY protection	COMMENT
LOW	src/devices/video/82c425.cpp	426	// TODO: implement 4-level gray scale scheme (shouldn't use gray scale palette)	COMMENT
LOW	src/devices/cpu/patinhofeio/patinho_feio.cpp	96	//TODO: implement handling of these special purpose registers	COMMENT
LOW	src/devices/cpu/scudsp/scudsp.cpp	716	// TODO: implement this rule for B-Bus	COMMENT
LOW	src/devices/cpu/es5510/es5510.cpp	1009	// TODO: implement i/o writing.	COMMENT
LOW	src/devices/cpu/tlcs900/tmp95c063.cpp	247	// TODO: implement timers 4-7	COMMENT
LOW	src/devices/cpu/avr8/avr8.cpp	3174	// TODO: implement timer 3. trying to fire these interrupts will crash arduboy games!	COMMENT
LOW	src/devices/cpu/avr8/avr8.cpp	3187	// TODO: implement timer 4. trying to fire these interrupts will crash arduboy games!	COMMENT
LOW	src/devices/cpu/avr8/avr8.cpp	3200	// TODO: implement timer 5	COMMENT
LOW	src/devices/bus/isa/gus.cpp	255	// TODO: implement proper panning	COMMENT
LOW	src/devices/bus/tanbus/mpvdu.cpp	37	//m_screen->set_screen_update("mc6845", FUNC(mc6845_device::screen_update)); // TODO: implement interlace in mc6845	COMMENT
LOW	src/devices/bus/tanbus/ravdu.cpp	38	//m_screen->set_screen_update("mc6845", FUNC(mc6845_device::screen_update)); // TODO: implement interlace in mc6845	COMMENT
LOW	src/devices/bus/multibus/labtam_z80sbc.cpp	332	// TODO: implement iei/ieo on z80sio	COMMENT
LOW	src/devices/bus/multibus/labtam_z80sbc.cpp	337	// TODO: implement iei/ieo on am9519	COMMENT
LOW	src/devices/bus/spectrum/beta128.cpp	46	//PORT_CONFSETTING(0x02, "Reset") // TODO: implement RESET callback	COMMENT
LOW	src/devices/bus/ata/gdrom.cpp	357	// TODO: implement SEEK & standby	COMMENT
LOW	src/devices/machine/68561mpcc.cpp	873	// TODO: implement Idle bit	COMMENT
LOW	src/devices/machine/68230pit.cpp	183	// TODO: implement priorities and support nested interrupts	COMMENT
LOW	src/devices/machine/68230pit.cpp	192	// TODO: implement priorities and support nested interrupts for the H1-H4 sources	COMMENT
LOW	src/devices/machine/it8671f.cpp	241	// TODO: implement extra LFSR writes for ISA PnP mode	COMMENT
LOW	src/devices/sound/hc55516.h	45	// TODO: implement this beyond a do-nothing stub	COMMENT
LOW	src/devices/sound/upd931.cpp	305	// TODO: implement this. ct8000 always writes 0 since it uses the external VCO vibrato instead	COMMENT

Deep Nesting77 hits · 75 pts

Severity	File	Line	Context
LOW	scripts/minimaws/lib/lxparse.py	199	CODE
LOW	scripts/minimaws/lib/lxparse.py	383	CODE
LOW	scripts/minimaws/lib/auxverbs.py	29	CODE
LOW	scripts/minimaws/lib/auxverbs.py	41	CODE
LOW	scripts/minimaws/lib/auxverbs.py	131	CODE
LOW	scripts/minimaws/lib/auxverbs.py	171	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	71	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	138	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	167	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	197	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	222	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	242	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	453	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	568	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	622	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	686	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	822	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	879	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	947	CODE
LOW	3rdparty/benchmark/mingw.py	55	CODE
LOW	3rdparty/benchmark/.ycm_extra_conf.py	79	CODE
LOW	3rdparty/zstd/tests/automated_benchmarking.py	260	CODE
LOW	3rdparty/zstd/tests/test-license.py	136	CODE
LOW	3rdparty/zstd/tests/fuzz/fuzz.py	736	CODE
LOW	3rdparty/zstd/tests/cli-tests/run.py	132	CODE
LOW	3rdparty/zstd/tests/cli-tests/run.py	583	CODE
LOW	3rdparty/zstd/contrib/freestanding_lib/freestanding.py	115	CODE
LOW	3rdparty/zstd/contrib/freestanding_lib/freestanding.py	149	CODE
LOW	3rdparty/zstd/contrib/freestanding_lib/freestanding.py	261	CODE
LOW	3rdparty/zstd/contrib/freestanding_lib/freestanding.py	523	CODE
LOW	3rdparty/zstd/contrib/freestanding_lib/freestanding.py	573	CODE
LOW	3rdparty/zstd/contrib/freestanding_lib/freestanding.py	614	CODE
LOW	3rdparty/catch/scripts/generateSingleHeader.py	47	CODE
LOW	src/tools/discrepancy-spotter.py	13	CODE
LOW	src/tools/discrepancy-fixer.py	13	CODE
LOW	src/devices/cpu/mcs96/mcs96make.py	71	CODE
LOW	src/devices/cpu/mcs96/mcs96make.py	120	CODE
LOW	src/devices/cpu/z80/z80make.py	71	CODE
LOW	src/devices/cpu/z80/z80make.py	162	CODE
LOW	src/devices/cpu/z80/z80make.py	261	CODE
LOW	src/devices/cpu/m6502/m6502make.py	17	CODE
LOW	src/devices/cpu/m6502/m6502make.py	87	CODE
LOW	src/devices/cpu/m6502/m6502make.py	236	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	825	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	885	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	934	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	1756	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	1879	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	1913	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	2003	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	886	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	938	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	1779	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	1914	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	2004	CODE
LOW	src/devices/cpu/m68000/m68kmake.py	210	CODE
LOW	src/devices/cpu/dsp563xx/dsp563xx-make.py	66	CODE
LOW	src/devices/cpu/dsp563xx/dsp563xx-make.py	85	CODE
LOW	src/devices/cpu/dsp563xx/dsp563xx-make.py	108	CODE
LOW	src/devices/cpu/dsp563xx/dsp563xx-make.py	133	CODE
17 more matches not shown…

Structural Annotation Overuse30 hits · 56 pts

Severity	File	Line	Snippet	Context
LOW	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	158	// Step 1: Create the if merge block for structured modules.	COMMENT
LOW	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	228	// Step 2: Build a new preheader for \|loop_\|, use the old one	COMMENT
LOW⚡	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	345	// Step 3: Duplicate \|loop_\|.	COMMENT
LOW⚡	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	354	// Step 4: Specialize the loop. //	COMMENT
LOW⚡	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	361	// Step 5: Connect convergent edges to the landing pads. //	COMMENT
LOW	…y/bgfx/3rdparty/spirv-tools/source/val/validate_id.cpp	59	/// NOTE: This function does NOT check module scoped functions which are	COMMENT
LOW	…fx/3rdparty/spirv-tools/source/val/validate_layout.cpp	356	// NOTE: This function does not handle CFG related validation	COMMENT
LOW	3rdparty/bgfx/3rdparty/glslang/SPIRV/SpvBuilder.cpp	3311	// Step 2: Construct a matrix from that array.	COMMENT
LOW	3rdparty/bgfx/3rdparty/glslang/SPIRV/GlslangToSpv.cpp	4825	// NOTE: This function can handle any store request; if it's not special it	COMMENT
LOW⚡	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	7751	// Step 1: If there's an exact match, use it.	COMMENT
LOW⚡	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	7754	// Step 3: Re-select after type promotion is applied, to find proper candidate.	COMMENT
LOW⚡	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	7756	// Step 1: If there's an exact match, use it.	COMMENT
LOW	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	7812	// Step 3: Re-select after type promotion, to find proper candidate	COMMENT
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui.cpp	3160	// Step 0: Let you process the first element (regardless of it being visible or not, so we can measure the element h	COMMENT
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui.cpp	3177	// Step 1: Let the clipper infer height from first range	COMMENT
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui.cpp	16892	// Step 0: stack query	COMMENT
LOW	3rdparty/asmjit/asmjit/core.h	1013	//! // NOTE: This function expects that the section has already an offset and	COMMENT
LOW	3rdparty/asmjit/asmjit/x86/x86builder.h	161	//! // NOTE: This function doesn't cover all possible constructs. It ignores instructions that write	COMMENT
LOW	3rdparty/glm/manual.md	2125	#### Step 1: Setup our GLM Fork	COMMENT
LOW	3rdparty/glm/manual.md	2138	#### Step 2: Synchronizing our fork	COMMENT
LOW	3rdparty/glm/manual.md	2164	#### Step 3: Modifying our GLM Fork	COMMENT
LOW	3rdparty/glm/manual.md	2207	#### Step 4: Submitting a Pull Request	COMMENT
LOW⚡	src/mame/nokia/mikromik_v.cpp	38	// Step 1: Instead of 8, set MCFG_I8275_CHARACTER_WIDTH(10) at the end of this file	COMMENT
LOW⚡	src/mame/nokia/mikromik_v.cpp	39	// Step 2: Make sure i8275_device::recompute_parameters() is called in i8275_device::device_start()	COMMENT
LOW⚡	src/mame/nokia/mikromik_v.cpp	40	// Step 3: Fill in missing 2 pixels in the screen bitmap by repeating last column of the char bitmap	COMMENT
LOW⚡	src/mame/namco/ygv608.cpp	1148	// Step 1: fold a coordinate into the HDS/VDS camera space.	COMMENT
LOW⚡	src/mame/namco/ygv608.cpp	1158	// Step 2: camera coordinate -> pixmap coordinate. wrap == false means the chip	COMMENT
LOW⚡	src/mame/sony/news_68k_iop.cpp	851	// Step 1: Get IDROM word address and byte offset	COMMENT
LOW⚡	src/mame/sony/news_68k_iop.cpp	855	// Step 2: Get target data byte	COMMENT
LOW⚡	src/mame/sony/news_68k_iop.cpp	858	// Step 3: Apply bit mask to get one of two data bits from the byte-encoded nibble and set DCD	COMMENT

Slop Phrases29 hits · 54 pts

Severity	File	Line	Snippet	Context
LOW	hash/sol20_cass.xml	777	Note for #3: Don't forget to SET S=80 from the monitor before playing the game, otherwise the game speed is way to fast.	CODE
MEDIUM	scripts/minimaws/minimaws.py	12	## Before you can use the scripts, you need to load MAME system	COMMENT
MEDIUM	scripts/minimaws/minimaws.py	20	## After you've loaded the database, you can use query commands. Most	COMMENT
MEDIUM	3rdparty/bgfx/examples/48-drawindirect/drawindirect.cpp	376	// This is done here for demonstration purposes	COMMENT
MEDIUM	3rdparty/bgfx/3rdparty/dear-imgui/imgui_widgets.cpp	6967	// Tip: pass a non-visible label (e.g. "##hello") then you can use the space to draw other text or image.	COMMENT
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui.cpp	874	- 2017/08/25 (1.52) - io.MousePos needs to be set to ImVec2(-FLT_MAX,-FLT_MAX) when mouse is unavailable/missing. Previ	CODE
LOW	3rdparty/asmjit/asmjit/x86/x86assembler.h	487	//! // Let's just emit 'sub zsp, 0' for now, but don't forget to use LONG form.	COMMENT
LOW	3rdparty/asmjit/asmjit/x86/x86assembler.h	503	//! a.long_().sub(zsp, stack_size); // Patch the code; don't forget to use LONG form.	COMMENT
LOW	3rdparty/bimg/3rdparty/lodepng/lodepng.cpp	70	lodepng source code. Don't forget to remove "static" if you copypaste them	CODE
MEDIUM	3rdparty/pugixml/docs/quickstart.html	576	<p>The complete pugixml source consists of three files - one source file, <code>pugixml.cpp</code>, and two header files	CODE
MEDIUM	3rdparty/pugixml/docs/quickstart.html	665	<p>Parsing result object can be implicitly converted to <code>bool</code>; if you do not want to handle parsing errors t	CODE
MEDIUM	3rdparty/pugixml/docs/quickstart.html	794	<p>If your C++ compiler supports range-based for-loop (this is a C++11 feature, supported by Microsoft V	CODE
MEDIUM	3rdparty/pugixml/docs/quickstart.html	1004	<p>To enhance interoperability pugixml provides functions for saving document to any object which implements C++	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	832	<p>The complete pugixml source consists of three files - one source file, <code>pugixml.cpp</code>, and two header files	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	892	<p>In addition to adding pugixml project to your workspace, you’ll have to make sure that your application links w	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	1204	<code>xml_document</code> is the owner of the entire document structure; it is a non-copyable class. The interface of <c	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	1712	<p>In addition to the status code, parsing result has an <code>offset</code> member, which contains the offset of last s	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	2062	Apart from structural information (parent, child nodes, attributes), nodes can have name and value, both of which are st	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	2270	If your C++ compiler supports range-based for-loop (this is a C++11 feature, supported by Microsoft Visu	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	2314	<p>When using C++20, you can also use nodes as well as objects returned by <code>children()</code> and <code>att	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	2666	As discussed before, nodes can have name and value, both of which are strings. Depending on node type, name or value may	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	3059	With the help of previously described functions, it is possible to create trees with any contents and structure, includi	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	3292	<p>To enhance interoperability pugixml provides functions for saving document to any object which implements C++	CODE
MEDIUM	3rdparty/pugixml/docs/manual.html	3882	<p>If you’re using query objects, you can change the variable values before <code>evaluate</code>/<code>select</co	CODE
LOW	3rdparty/portaudio/test/patest_dither.c	188	printf("\n(Don't forget to turn the VOLUME DOWN after listening so carefully.)\n");	CODE
LOW	3rdparty/portaudio/src/common/pa_process.c	1505	\|\| streamCallbackResult == paAbort ); / don't forget to pass in a valid callback result value */	CODE
LOW	src/mame/misc/videoart.cpp	142	// note: if palette gets tweaked, don't forget to update internal artwork too	COMMENT
LOW	src/mame/toaplan/rallybik.cpp	52	Don't forget to turn the "TEST" Switch OFF when time is over on bonus stage,	CODE
LOW	src/mame/sony/pve500.cpp	14	(Don't forget to unlock the keyboard by using the UI TOGGLE key)	CODE

AI Response Leakage7 hits · 52 pts

Severity	File	Line	Snippet	Context
HIGH	…y/bgfx/3rdparty/spirv-tools/source/util/small_vector.h	38	// TODO: I have implemented the public member functions from \|std::vector\| that	COMMENT
HIGH	3rdparty/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	263	/// <remarks>In this implementation, this method does nothing. This is because excessive	COMMENT
HIGH	3rdparty/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	273	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT
HIGH	3rdparty/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	290	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT
HIGH	src/mame/midw8080/nl_280zzzap.cpp	776	// the original, so I've added a voltage-limiting AFUNC to the op-amp	COMMENT
HIGH	src/mame/taito/nl_sspeedr.cpp	438	// the original, so I've added a voltage-limiting AFUNC to the op-amp	COMMENT
HIGH	src/lib/netlist/macro/nlm_opamp_lib.cpp	176	// The Motorola schematics do not label components, so I've created my	COMMENT

Excessive Try-Catch Wrapping42 hits · 46 pts

Severity	File	Line	Snippet	Context
MEDIUM	regtests/jedutil/jedtest.py	68	print("Error: JED test named " + test.name + " failed during viewing (" + stderr.decode('latin-1').strip() +	CODE
LOW	…3rdparty/iconfontheaders/GenerateIconFontCppHeaders.py	527	except Exception as e:	CODE
LOW	3rdparty/zstd/tests/DEPRECATED-test-zstd-speed.py	74	except Exception:	CODE
LOW	3rdparty/zstd/tests/DEPRECATED-test-zstd-speed.py	370	except Exception as e:	CODE
MEDIUM	3rdparty/zstd/tests/DEPRECATED-test-zstd-speed.py	71	def does_command_exist(command):	CODE
LOW	3rdparty/zstd/tests/fuzz/fuzz.py	397	except Exception as e:	STRING
LOW	3rdparty/zstd/tests/fuzz/fuzz.py	583	except Exception as e:	STRING
LOW	3rdparty/zstd/tests/fuzz/fuzz.py	636	except Exception as e:	STRING
LOW	3rdparty/zstd/tests/fuzz/fuzz.py	660	except Exception as e:	STRING
LOW	3rdparty/zstd/tests/fuzz/fuzz.py	739	except Exception as e:	STRING
LOW	3rdparty/zstd/tests/fuzz/fuzz.py	814	except Exception as e:	STRING
LOW	3rdparty/zstd/tests/fuzz/fuzz.py	839	except Exception as e:	STRING
MEDIUM	3rdparty/zstd/tests/fuzz/fuzz.py	905	print("Error: No such command {} (pass -h for help)".format(command))	STRING
MEDIUM	3rdparty/zstd/tests/fuzz/fuzz.py	394	def build(args):	CODE
MEDIUM	3rdparty/zstd/tests/fuzz/fuzz.py	580	def libfuzzer_cmd(args):	CODE
MEDIUM	3rdparty/zstd/tests/fuzz/fuzz.py	633	def afl(args):	CODE
MEDIUM	3rdparty/zstd/tests/fuzz/fuzz.py	651	def regression(args):	CODE
MEDIUM	3rdparty/zstd/tests/fuzz/fuzz.py	736	def gen(args):	CODE
MEDIUM	3rdparty/zstd/tests/fuzz/fuzz.py	807	def minimize(args):	CODE
MEDIUM	3rdparty/zstd/tests/fuzz/fuzz.py	833	def zip_cmd(args):	CODE
LOW	src/tools/discrepancy-spotter.py	39	except Exception as e:	CODE
LOW	src/tools/discrepancy-fixer.py	30	except Exception as e:	CODE
LOW	src/tools/discrepancy-fixer.py	68	except Exception as e:	CODE
LOW	src/devices/cpu/mcs96/mcs96make.py	78	except Exception:	STRING
LOW	src/devices/cpu/mcs96/mcs96make.py	186	except Exception:	STRING
LOW	src/devices/cpu/z80/z80make.py	169	except Exception:	STRING
LOW	src/devices/cpu/z80/z80make.py	344	except Exception:	STRING
LOW	src/devices/cpu/m6502/m6502make.py	23	except Exception:	CODE
LOW	src/devices/cpu/m6502/m6502make.py	55	except Exception:	CODE
LOW	src/devices/cpu/m6502/m6502make.py	264	except Exception:	STRING
LOW	src/devices/cpu/m6502/m6502make.py	278	except Exception:	STRING
LOW	src/devices/cpu/m68000/m68kmake.py	264	except Exception:	CODE
LOW	src/devices/cpu/m68000/m68kmake.py	332	except Exception:	CODE
LOW	src/devices/cpu/m68000/m68kmake.py	338	except Exception:	CODE
MEDIUM	src/devices/cpu/m68000/m68kmake.py	261	def __init__(self, path):	CODE
LOW	src/devices/cpu/m6809/m6809make.py	21	except Exception:	CODE
LOW	src/devices/cpu/h8/h8make.py	304	except Exception:	STRING
LOW	src/devices/cpu/h8/h8make.py	495	except Exception:	STRING
LOW	src/devices/cpu/h8500/h8500make.py	459	except Exception:	CODE
LOW	src/devices/cpu/h8500/h8500make.py	740	except Exception:	CODE
MEDIUM	src/devices/cpu/h8500/h8500make.py	142	def is_valid_scope(s):	CODE
LOW	src/devices/cpu/tms57002/tmsmake.py	441	except Exception:	CODE

Verbosity Indicators23 hits · 45 pts

Severity	File	Line	Snippet	Context
LOW	…oject/app/src/main/java/org/libsdl/app/SDLSurface.java	279	// We need to check if we're in relative mouse mode and get the axis offset rather than the x/y values	COMMENT
LOW	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	158	// Step 1: Create the if merge block for structured modules.	COMMENT
LOW	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	228	// Step 2: Build a new preheader for \|loop_\|, use the old one	COMMENT
LOW⚡	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	345	// Step 3: Duplicate \|loop_\|.	COMMENT
LOW⚡	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	354	// Step 4: Specialize the loop. //	COMMENT
LOW⚡	…3rdparty/spirv-tools/source/opt/loop_unswitch_pass.cpp	361	// Step 5: Connect convergent edges to the landing pads. //	COMMENT
LOW	3rdparty/bgfx/3rdparty/glslang/SPIRV/SpvBuilder.cpp	3311	// Step 2: Construct a matrix from that array.	COMMENT
LOW⚡	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	7751	// Step 1: If there's an exact match, use it.	COMMENT
LOW⚡	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	7754	// Step 3: Re-select after type promotion is applied, to find proper candidate.	COMMENT
LOW⚡	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	7756	// Step 1: If there's an exact match, use it.	COMMENT
LOW	…bgfx/3rdparty/glslang/glslang/HLSL/hlslParseHelper.cpp	7812	// Step 3: Re-select after type promotion, to find proper candidate	COMMENT
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui.cpp	3160	// Step 0: Let you process the first element (regardless of it being visible or not, so we can measure the element h	COMMENT
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui.cpp	3177	// Step 1: Let the clipper infer height from first range	COMMENT
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui.cpp	16892	// Step 0: stack query	COMMENT
LOW	3rdparty/bx/3rdparty/catch/catch_amalgamated.cpp	4874	// No children have started. We need to check if they _can_	COMMENT
LOW⚡	src/mame/nokia/mikromik_v.cpp	38	// Step 1: Instead of 8, set MCFG_I8275_CHARACTER_WIDTH(10) at the end of this file	COMMENT
LOW⚡	src/mame/nokia/mikromik_v.cpp	39	// Step 2: Make sure i8275_device::recompute_parameters() is called in i8275_device::device_start()	COMMENT
LOW⚡	src/mame/nokia/mikromik_v.cpp	40	// Step 3: Fill in missing 2 pixels in the screen bitmap by repeating last column of the char bitmap	COMMENT
LOW⚡	src/mame/namco/ygv608.cpp	1148	// Step 1: fold a coordinate into the HDS/VDS camera space.	COMMENT
LOW⚡	src/mame/namco/ygv608.cpp	1158	// Step 2: camera coordinate -> pixmap coordinate. wrap == false means the chip	COMMENT
LOW⚡	src/mame/sony/news_68k_iop.cpp	851	// Step 1: Get IDROM word address and byte offset	COMMENT
LOW⚡	src/mame/sony/news_68k_iop.cpp	855	// Step 2: Get target data byte	COMMENT
LOW⚡	src/mame/sony/news_68k_iop.cpp	858	// Step 3: Apply bit mask to get one of two data bits from the byte-encoded nibble and set DCD	COMMENT

Fake / Example Data32 hits · 44 pts

Severity	File	Line	Snippet	Context
LOW	3rdparty/bgfx/examples/20-nanovg/nanovg.cpp	1100	const char* text = "This is longer chunk of text.\n \n Would have used lorem ipsum but she was busy jumping over t	CODE
LOW⚡	3rdparty/bgfx/3rdparty/dear-imgui/imgui_demo.cpp	7365	ImGui::TextWrapped("Lorem ipsum dolor sit amet");	CODE
LOW⚡	3rdparty/bgfx/3rdparty/dear-imgui/imgui_demo.cpp	7365	ImGui::TextWrapped("Lorem ipsum dolor sit amet");	CODE
LOW⚡	3rdparty/bgfx/3rdparty/dear-imgui/imgui_demo.cpp	7367	ImGui::Text("Lorem ipsum dolor sit amet");	CODE
LOW⚡	3rdparty/bgfx/3rdparty/dear-imgui/imgui_demo.cpp	7367	ImGui::Text("Lorem ipsum dolor sit amet");	CODE
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui_demo.cpp	9158	ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor i	CODE
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui_demo.cpp	9158	ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor i	CODE
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui_demo.cpp	10015	ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut	CODE
LOW	3rdparty/bgfx/3rdparty/dear-imgui/imgui_demo.cpp	10015	ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut	CODE
LOW⚡	3rdparty/asmjit/asmjit/core/codeholder.cpp	1389	uint32_t dummy_id;	CODE
LOW⚡	3rdparty/asmjit/asmjit/core/codeholder.cpp	1394	EXPECT_EQ(code.new_named_label_id(Out(dummy_id), "", SIZE_MAX, LabelType::kAnonymous), Error::kOk);	CODE
LOW⚡	3rdparty/asmjit/asmjit/core/codeholder.cpp	1397	EXPECT_EQ(code.new_named_label_id(Out(dummy_id), "", SIZE_MAX, LabelType::kGlobal), Error::kInvalidLabelName);	CODE
LOW⚡	3rdparty/asmjit/asmjit/core/codeholder.cpp	1401	EXPECT_EQ(code.new_named_label_id(Out(dummy_id), "NamedLabel1", SIZE_MAX, LabelType::kGlobal), Error::kLabelAlreadyDef	CODE
LOW⚡	3rdparty/asmjit/asmjit/core/codeholder.cpp	1408	EXPECT_EQ(code.new_named_label_id(Out(dummy_id), "NamedLabel2", SIZE_MAX, LabelType::kGlobal), Error::kLabelAlreadyDef	CODE
LOW	3rdparty/zstd/tests/loremOut.h	12	* Generate @size bytes of compressible data using lorem ipsum generator into	COMMENT
LOW	3rdparty/zstd/tests/fullbench.c	932	* if @compressibility < 0.0, use Lorem Ipsum generator	COMMENT
LOW	3rdparty/zstd/tests/loremOut.c	12	* Generates a stream of Lorem ipsum paragraphs to stdout,	COMMENT
LOW	…ty/zstd/contrib/seekable_format/tests/seekable_tests.c	272	{ char const inBuffer[] = "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididu	CODE
LOW	…ty/zstd/contrib/seekable_format/tests/seekable_tests.c	272	{ char const inBuffer[] = "Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididu	CODE
LOW	3rdparty/zstd/programs/lorem.h	11	/* lorem ipsum generator */	COMMENT
LOW	3rdparty/zstd/programs/lorem.h	17	* Generate @size bytes of compressible data using lorem ipsum generator	COMMENT
LOW	3rdparty/zstd/programs/benchzstd.h	128	* if @compressibility < 0.0, uses the lorem ipsum generator	COMMENT
LOW	3rdparty/zstd/programs/README.md	133	If no file is provided, the benchmark will use a procedurally generated "lorem ipsum" content.	CODE
LOW	3rdparty/zstd/programs/zstd.1.md	674	When no `FILE` is provided, the benchmark will use a procedurally generated `lorem ipsum` text.	CODE
LOW	3rdparty/zstd/programs/benchzstd.c	1015	name = "Lorem ipsum";	CODE
LOW⚡	3rdparty/zstd/programs/lorem.c	13	* This is a very simple lorem ipsum generator	COMMENT
LOW⚡	3rdparty/zstd/programs/lorem.c	20	* The resulting compression / ratio curve of the lorem ipsum generator	COMMENT
LOW⚡	3rdparty/zstd/programs/lorem.c	25	* The compression ratio achievable on the generated lorem ipsum	COMMENT
LOW	3rdparty/zstd/programs/lorem.c	240	/* It's "common" for lorem ipsum generators to start with the same first	COMMENT
LOW	3rdparty/zstd/programs/zstdcli.c	872	double compressibility = -1.0; /* lorem ipsum generator */	CODE
LOW	src/frontend/mame/ui/custui.cpp	555	char const *const bottomtext[] = { _("Sample text - Lorem ipsum dolor sit amet, consectetur adipiscing elit.") };	CODE
LOW	src/frontend/mame/ui/custui.cpp	555	char const *const bottomtext[] = { _("Sample text - Lorem ipsum dolor sit amet, consectetur adipiscing elit.") };	CODE

Cross-Language Confusion7 hits · 29 pts

Severity	File	Line	Snippet	Context
HIGH	3rdparty/zstd/tests/automated_benchmarking.py	103	os.system("cd ../ && make -j && cd tests")	CODE
HIGH	3rdparty/zstd/contrib/freestanding_lib/freestanding.py	55	Handles && and \|\|.	STRING
HIGH	src/devices/cpu/m68000/m68000gen.py	2215	source.append("\tif(m_icount <= %s && access_to_be_redone()) {" % ("m_bcount" if gen_mode &	CODE
HIGH⚡	src/devices/cpu/h8500/h8500make.py	97	'imm': "(m_ir[0] == 0x04 \|\| m_ir[0] == 0x0c)",	STRING
HIGH⚡	src/devices/cpu/h8500/h8500make.py	98	'absb': "(m_ir[0] == 0x05 \|\| m_ir[0] == 0x0d)",	STRING
HIGH⚡	src/devices/cpu/h8500/h8500make.py	99	'absw': "(m_ir[0] == 0x15 \|\| m_ir[0] == 0x1d)",	STRING
HIGH	src/devices/cpu/tms57002/tmsmake.py	71	" if(r < -2147483648 \|\| r > 2147483647) {\n"	CODE

Unused Imports26 hits · 26 pts

Severity	File	Line	Context
LOW	scripts/minimaws/lib/wsgiserve.py	15	CODE
LOW	3rdparty/zstd/tests/check_size.py	13	CODE
LOW	3rdparty/zstd/tests/test-zstd-versions.py	19	CODE
LOW	3rdparty/zstd/tests/DEPRECATED-test-zstd-speed.py	20	CODE
LOW	3rdparty/zstd/tests/test-license.py	13	CODE
LOW	3rdparty/zstd/contrib/freestanding_lib/freestanding.py	13	CODE
LOW	3rdparty/catch/scripts/approve.py	3	CODE
LOW	3rdparty/catch/scripts/approve.py	7	CODE
LOW	3rdparty/catch/scripts/developBuild.py	3	CODE
LOW	3rdparty/catch/scripts/generateSingleHeader.py	3	CODE
LOW	3rdparty/catch/scripts/fixWhitespace.py	3	CODE
LOW	3rdparty/catch/scripts/releaseCommon.py	1	CODE
LOW	3rdparty/catch/scripts/releaseCommon.py	4	CODE
LOW	3rdparty/catch/scripts/releaseCommon.py	6	CODE
LOW	3rdparty/catch/scripts/approvalTests.py	3	CODE
LOW	3rdparty/catch/scripts/majorRelease.py	3	CODE
LOW	3rdparty/catch/scripts/minorRelease.py	3	CODE
LOW	3rdparty/catch/scripts/patchRelease.py	3	CODE
LOW	src/devices/cpu/mcs96/mcs96make.py	5	CODE
LOW	src/devices/cpu/z80/z80make.py	4	CODE
LOW	src/devices/cpu/m6502/m6502make.py	5	CODE
LOW	src/devices/cpu/m68000/m68kmake.py	7	CODE
LOW	src/devices/cpu/dsp563xx/dsp563xx-make.py	4	CODE
LOW	src/devices/cpu/h8/h8make.py	4	CODE
LOW	src/devices/cpu/h8500/h8500make.py	4	CODE
LOW	src/devices/cpu/tms57002/tmsmake.py	5	CODE

Hyper-Verbose Identifiers24 hits · 26 pts

Severity	File	Line	Snippet	Context
LOW	scripts/minimaws/lib/dbaccess.py	777	def get_machine_softwarelists(self, machine):	CODE
LOW	scripts/minimaws/lib/dbaccess.py	804	def get_softwarelist_software(self, id, pattern):	CODE
LOW	scripts/minimaws/lib/dbaccess.py	820	def get_softwarelist_machines(self, id):	CODE
LOW	scripts/minimaws/lib/dbaccess.py	869	def get_softwarepart_features(self, part):	CODE
LOW	scripts/minimaws/lib/dbaccess.py	924	def add_softwaresharedfeattype(self, name):	CODE
LOW	scripts/minimaws/lib/dbaccess.py	927	def add_softwarepartfeaturetype(self, name):	CODE
LOW	scripts/minimaws/lib/wsgiserve.py	602	def softwarelist_listing_page(self, pattern):	CODE
LOW	3rdparty/benchmark/tools/gbench/report.py	69	def generate_difference_report(json1, json2, use_color=True):	CODE
LOW	…3rdparty/iconfontheaders/GenerateIconFontCppHeaders.py	109	def get_intermediate_representation( cls ):	CODE
LOW	3rdparty/asmjit/tools/tablegen-x86.js	909	function normalizeOpcodeComponents(components) {	CODE
LOW	3rdparty/zstd/tests/automated_benchmarking.py	73	def get_builds_for_latest_hash():	CODE
LOW	3rdparty/zstd/tests/automated_benchmarking.py	145	def benchmark_dictionary_single(executable, filenames_directory, dictionary_filename, level, iterations):	CODE
LOW	3rdparty/zstd/tests/automated_benchmarking.py	172	def parse_regressions_and_labels(old_cspeed, new_cspeed, old_dspeed, new_dspeed, baseline_build, test_build):	CODE
LOW	3rdparty/zstd/tests/automated_benchmarking.py	221	def get_regressions_dictionary(baseline_build, test_build, filenames_directory, dictionary_filename, levels, iterations)	CODE
LOW	3rdparty/zstd/tests/DEPRECATED-test-zstd-speed.py	92	def send_email_with_attachments(branch, commit, last_commit, args, text, results_files,	CODE
LOW	3rdparty/portaudio/pa_compare_def_files.py	48	def clear_cmake_exclude_condition_prefix(sym):	CODE
LOW⚡	src/devices/cpu/m68000/m68000gen.py	1971	def generate_intermediate_code_from_instruction(ir, irmask, name, gen_mode):	CODE
LOW⚡	src/devices/cpu/m68000/m68000gen.py	1981	def generate_intermediate_code_from_state(state, gen_mode):	CODE
LOW⚡	src/devices/cpu/m68000/m68000gen.py	1992	def handler_name_for_instruction(ii):	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	934	def generate_base_code_for_microcode(ir, irmask, madr, tvn, group01):	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	1879	def generate_code_from_blocks(blocks, ir, irmask, tvn, priv, group01):	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	1959	def generate_intermediate_code(a1, a2, a3, ir, irmask, tvn, critical, priv, group01, gen_mode, name):	CODE
LOW	src/devices/cpu/m68000/m68000gen.py	2003	def generate_source_from_code(code, gen_mode):	CODE
LOW	src/devices/cpu/dsp563xx/dsp563xx-make.py	1065	def check_move_npar_collisions(self):	CODE

Redundant / Tautological Comments24 hits · 22 pts

Severity	File	Line	Snippet	Context
LOW	3rdparty/benchmark/.ycm_extra_conf.py	26	# Set this to the absolute path to the folder (NOT the file!) containing the	COMMENT
LOW	3rdparty/libjpeg/ltmain.sh	623	# Set func_arith_result to the result of evaluating TERMs.	COMMENT
LOW	3rdparty/libjpeg/ltmain.sh	647	# Set func_basename_result to FILE with everything up to and including	COMMENT
LOW	3rdparty/libjpeg/ltmain.sh	813	# Set func_len_result to the length of STRING. STRING may not	COMMENT
LOW	3rdparty/libjpeg/ltmain.sh	1031	# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.	COMMENT
LOW	3rdparty/libjpeg/ltmain.sh	3911	# Check if any of the arguments is a wrapper script.	COMMENT
LOW	3rdparty/libjpeg/ltmain.sh	9868	# Loop over the list of objects to be linked.	COMMENT
LOW	3rdparty/expat/conftools/ltmain.sh	379	# Check if we can use backslash as IFS='\' separator, and set	COMMENT
LOW	3rdparty/expat/conftools/ltmain.sh	666	# Set func_arith_result to the result of evaluating TERMs.	COMMENT
LOW	3rdparty/expat/conftools/ltmain.sh	690	# Set func_basename_result to FILE with everything up to and including	COMMENT
LOW	3rdparty/expat/conftools/ltmain.sh	856	# Set func_len_result to the length of STRING. STRING may not	COMMENT
LOW	3rdparty/expat/conftools/ltmain.sh	1074	# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.	COMMENT
LOW	3rdparty/expat/conftools/ltmain.sh	4294	# Check if any of the arguments is a wrapper script.	COMMENT
LOW	3rdparty/expat/conftools/ltmain.sh	10252	# Loop over the list of objects to be linked.	COMMENT
LOW	3rdparty/zlib/os400/make.sh	66	# Set LINK to "YES" if the module has been compiled.	COMMENT
LOW	3rdparty/flac/ltmain.sh	623	# Set func_arith_result to the result of evaluating TERMs.	COMMENT
LOW	3rdparty/flac/ltmain.sh	647	# Set func_basename_result to FILE with everything up to and including	COMMENT
LOW	3rdparty/flac/ltmain.sh	813	# Set func_len_result to the length of STRING. STRING may not	COMMENT
LOW	3rdparty/flac/ltmain.sh	1031	# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.	COMMENT
LOW	3rdparty/flac/ltmain.sh	4003	# Check if any of the arguments is a wrapper script.	COMMENT
LOW	3rdparty/flac/ltmain.sh	9972	# Loop over the list of objects to be linked.	COMMENT
LOW	3rdparty/portaudio/ltmain.sh	2593	# Check if any of the arguments is a wrapper script.	COMMENT
LOW	3rdparty/portaudio/ltmain.sh	8382	# Loop over the list of objects to be linked.	COMMENT
LOW	src/devices/cpu/m68000/m68000gen.py	1753	# Check if rx or ry is used in generated code and if it targets a data	COMMENT

Empty Error Handlers4 hits · 20 pts

Severity	File	Line	Snippet	Context
HIGH	scripts/minimaws/minimaws.py	143	except KeyboardInterrupt:	CODE
HIGH	scripts/minimaws/lib/wsgiserve.py	839	except BaseException as e:	CODE
HIGH	scripts/minimaws/lib/wsgiserve.py	894	except BaseException as e:	CODE
HIGH	3rdparty/zstd/tests/rateLimiter.py	40	except (KeyboardInterrupt, BrokenPipeError) as e:	CODE

Modern Structural Boilerplate3 hits · 3 pts

Severity	File	Line	Snippet	Context
LOW	3rdparty/benchmark/tools/gbench/__init__.py	8	__all__ = []	CODE
LOW	3rdparty/zstd/tests/cli-tests/run.py	489	def _setup_once(self) -> None:	CODE
LOW	3rdparty/zstd/tests/cli-tests/run.py	505	def _setup(self, test_basename: str) -> None:	CODE

Example Usage Blocks1 hit · 2 pts

Severity	File	Line	Snippet	Context
LOW	3rdparty/zlib/contrib/minizip/skipset.h	20	// Example usage:	COMMENT

mamedev/mame

Open-Source Code Quality, Security and Technical Debt Review