A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol
This report presents the forensic synthetic code analysis of geo-tp/ESP32-Bit-Pirate, a C++ project with 5,281 GitHub stars. SynthScan v2.0 examined 195,420 lines of code across 831 source files, recording 706 pattern matches distributed across 7 syntactic categories. The overall adjusted score of 3.7 places this repository in the Likely human-written band.
The scanner applied 160+ deterministic lexical heuristics, multi-line block detectors, abstract syntax tree depth profilers, and a cross-file Jaccard similarity matrix to construct a statistically normalised synthetic code estimate. All matches are individually weighted by severity coefficient and contextual multiplier before summation, and the resulting headline score is temporally discounted to account for the repository's development history relative to the commercial emergence of large language model coding tooling (November 2022 onward).
Longitudinal tracking requires multiple scan runs. Once this repository is re-scanned after new commits land, this chart will visualise how the synthetic code signal evolves over time — enabling you to detect whether AI authorship is growing, stabilising, or being actively corrected by human engineers.
Classifies detected patterns by their diagnostic confidence and structural impact. CRITICAL patterns (coefficient 10) represent definitive synthetic signatures — hallucinated imports, explicit LLM attribution metadata — virtually never produced by human authors. HIGH (5) indicates strong structural tells such as cross-file repetition or cross-linguistic idioms. MEDIUM (2) covers recognisable conversational padding and AI-specific vocabulary. LOW (1) captures subtle indicators like tautological comments and generic boilerplate that require density to carry independent signal.
This horizontal bar chart decomposes the repository's raw synthetic code score by top-level directory, allowing you to pinpoint precisely which modules or components carry the highest AI authorship density. Directories with disproportionately high scores relative to their size warrant targeted manual review: concentrated AI signatures often trace back to mass-generated configuration layers, auto-ported test suites, LLM-scaffolded boilerplate classes, or entire subsystems authored under heavy copilot assistance. Use this view to prioritise your human code-review effort.
The scanner identified 706 distinct pattern matches across 7 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a statistically significant AI authorship indicator. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.
Reading the findings table: The Severity column indicates the diagnostic confidence level (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — comment-context matches receive a ×1.5 weight because LLMs systematically over-annotate. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier as dense clusters constitute far stronger evidence of synthetic authorship than isolated hits.
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | test/test_main.cpp | 1 | #include <unity.h> | COMMENT |
| LOW | test/test_main.cpp | 21 | #include "../src/Analyzers/SubGhzAnalyzer.cpp" | COMMENT |
| LOW | test/test_main.cpp | 41 | #include "../src/Controllers/SpiController.cpp" | COMMENT |
| LOW | test/test_main.cpp | 61 | #include "Transformers/test_PinoutTransformer.cpp" | COMMENT |
| LOW | test/test_main.cpp | 81 | #include "Managers/test_AliasManager.cpp" | COMMENT |
| LOW | test/test_main.cpp | 101 | #include "Controllers/test_ThreeWireController.cpp" | COMMENT |
| LOW | test/Abstracts/test_ANetworkController.cpp | 1 | #include <unity.h> | COMMENT |
| LOW | test/Controllers/test_EthernetController.cpp | 1 | #include <unity.h> | COMMENT |
| LOW | test/Controllers/test_UartController.cpp | 1 | #include <unity.h> | COMMENT |
| LOW | test/Controllers/test_SubGhzController.cpp | 1 | #include <unity.h> | COMMENT |
| LOW | test/Controllers/test_WifiController.cpp | 1 | #include <unity.h> | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 61 | #include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut" | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 81 | #define TONE_PIN PIN_PA3 | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 101 | #define LED_BUILTIN PIN_PA6 // use 2 instead of PIN_PA6 for TinyCore32 | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 141 | COMMENT | |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 161 | #define TONE_PIN 4 | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 201 | ledcWriteTone(TONE_LEDC_CHANNEL, 0); | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 221 | #define APPLICATION_PIN PA2 | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 241 | COMMENT | |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 261 | /* | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 281 | #define IR_RECEIVE_PIN 2 | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 301 | //#define FEEDBACK_LED_IS_ACTIVE_LOW // The RX LED on the M0-Mini is active LOW | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 321 | #define _IR_TIMING_TEST_PIN 7 | COMMENT |
| LOW | …les/SimpleReceiverForHashCodes/PinDefinitionsAndMore.h | 341 | #define STR(x) STR_HELPER(x) | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 61 | #include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut" | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 81 | #define TONE_PIN PIN_PA3 | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 101 | #define LED_BUILTIN PIN_PA6 // use 2 instead of PIN_PA6 for TinyCore32 | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 141 | COMMENT | |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 161 | #define TONE_PIN 4 | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 201 | ledcWriteTone(TONE_LEDC_CHANNEL, 0); | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 221 | #define APPLICATION_PIN PA2 | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 241 | COMMENT | |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 261 | /* | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 281 | #define IR_RECEIVE_PIN 2 | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 301 | //#define FEEDBACK_LED_IS_ACTIVE_LOW // The RX LED on the M0-Mini is active LOW | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 321 | #define _IR_TIMING_TEST_PIN 7 | COMMENT |
| LOW | lib/IRremote/examples/UnitTest/PinDefinitionsAndMore.h | 341 | #define STR(x) STR_HELPER(x) | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 61 | #include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut" | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 81 | #define TONE_PIN PIN_PA3 | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 101 | #define LED_BUILTIN PIN_PA6 // use 2 instead of PIN_PA6 for TinyCore32 | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 141 | COMMENT | |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 161 | #define TONE_PIN 4 | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 201 | ledcWriteTone(TONE_LEDC_CHANNEL, 0); | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 221 | #define APPLICATION_PIN PA2 | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 241 | COMMENT | |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 261 | /* | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 281 | #define IR_RECEIVE_PIN 2 | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 301 | //#define FEEDBACK_LED_IS_ACTIVE_LOW // The RX LED on the M0-Mini is active LOW | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 321 | #define _IR_TIMING_TEST_PIN 7 | COMMENT |
| LOW | …xamples/ReceiveAndSendHob2Hood/PinDefinitionsAndMore.h | 341 | #define STR(x) STR_HELPER(x) | COMMENT |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 61 | #include "ATtinySerialOut.hpp" // Available as Arduino library "ATtinySerialOut" | COMMENT |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 81 | #define TONE_PIN PIN_PA3 | COMMENT |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 101 | #define LED_BUILTIN PIN_PA6 // use 2 instead of PIN_PA6 for TinyCore32 | COMMENT |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 141 | COMMENT | |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 161 | #define TONE_PIN 4 | COMMENT |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 201 | ledcWriteTone(TONE_LEDC_CHANNEL, 0); | COMMENT |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 221 | #define APPLICATION_PIN PA2 | COMMENT |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 241 | COMMENT | |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 261 | /* | COMMENT |
| LOW | …remote/examples/SendAndReceive/PinDefinitionsAndMore.h | 281 | #define IR_RECEIVE_PIN 2 | COMMENT |
| 617 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | lib/IRremote/changelog.md | 32 | - Added convenience function isIRReceiverAttachedForTinyReceiver(). | CODE |
| LOW | lib/IRremote/changelog.md | 81 | - Split ISR into ISR and function IRPinChangeInterruptHandler(). | CODE |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 1102 | // Undefine ISR, because we register/call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 1408 | // Undefine ISR, because we register/call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 1483 | // Undefine ISR, because we register/call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 1624 | // Undefine ISR, because we call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 1730 | // Undefine ISR, because we register/call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 1787 | // Undefine ISR, because we register/call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 1869 | // Undefine ISR, because we call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 1931 | // Undefine ISR, because we register/call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 1973 | // Undefine ISR, because we register/call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | lib/IRremote/src/private/IRTimer.hpp | 2003 | // Undefine ISR, because we register/call the plain function IRReceiveTimerInterruptHandler() | COMMENT |
| LOW | webui/scripts.h | 532 | function extractPromptAndTypedPart(lineWithoutAnsi) { | CODE |
| LOW | webui/scripts.h | 590 | function filterIncomingTerminalData(data) { | CODE |
| LOW | webui/scripts.h | 837 | function saveGeminiApiKeyToStorage() { | CODE |
| LOW | webui/scripts.h | 858 | function clearGeminiApiKeyFromStorage() { | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | lib/RF24/RF24.cpp | 2216 | // Else set level as requested | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW⚡ | src/Services/UartService.cpp | 331 | byte** dummy_data = (byte**)malloc(sizeof(byte*) * totalBlocks); | CODE |
| LOW⚡ | src/Services/UartService.cpp | 334 | dummy_data[i] = nullptr; | CODE |
| LOW⚡ | src/Services/UartService.cpp | 340 | .data_arr = dummy_data, | CODE |
| LOW | src/Services/UartService.cpp | 351 | free(dummy_data); | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | test/Adapters/irtoy_tx_stress.py | 151 | except Exception as exc: | CODE |
| LOW | test/Adapters/irtoy_replay.py | 125 | except Exception as exc: | CODE |
| LOW | test/Adapters/irtoy_record_replay.py | 168 | except Exception as exc: | CODE |
| LOW | test/Adapters/irtoy_smoke_test.py | 80 | except Exception as exc: | CODE |
| LOW | test/Adapters/subghz_raw_cdc_adapter_test.py | 176 | except Exception as exc: | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | .github/workflows/cd.yml | 185 | # Create a fresh history containing only the latest upstream builds. | COMMENT |
| MEDIUM | …/examples_uno_q/rf24_encoderadiodetails/python/main.py | 194 | """This function is called repeatedly by the App framework.""" | STRING |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | lib/SX126x-Arduino/src/mac/region/RegionAU915.cpp | 407 | // the node shall utilize 125KHz channels. | COMMENT |