3.7

Adjusted Signal

3.7

Raw Pattern Score

100%

Time Factor

2026-10-30

Last Push

16.8K

Stars

Language

425.4K

Lines of Code

2.5K

Files

1.1K

Pattern Hits

2026-10-31

Scan Date

0.03

HC Hit Rate

Risk Review · Payload v1

Use each vector to guide manual verification of the underlying findings.

Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.

Cognitive Ownership Risk 10.1/100 · LOW

Can maintainers explain intent, assumptions, and trade-offs? 965 finding(s).

Hallucinated Dependency & Supply Chain Risk 5.3/100 · LOW

Are imports declared and package/API names verified? 78 finding(s).

Agent Over-Engineering Ratio 2.5/100 · LOW

Are wrappers, guards, and repeated structures necessary? 114 finding(s).

PR Review Velocity Impact 17.4/100 · LOW

Which changes need focused human review? 1132 finding(s).

What These Metrics Mean

Adjusted Signal: Legacy pattern score normalized per 1,000 scanned lines and multiplied by the repository-level time factor. It is not an estimate of AI authorship.
Raw Pattern Score: Sum of severity- and context-weighted pattern findings before applying the time factor.
Time Factor: A coarse multiplier based on repository last-push metadata. It does not identify when individual code was written.
Pattern Hits: Count of configured pattern findings. Review each location and surrounding code before acting.
HC Hit Rate: High- and critical-severity findings per scanned file. Severity is a configured detector weight, not proof of a vulnerability or authorship.
Lines / Files: Scan coverage denominators used by the legacy normalized score.

Pattern-Signal History

This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.

Severity Breakdown

Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.

CRITICAL 0HIGH 74MEDIUM 61LOW 997

Directory Score Breakdown

This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.

Pattern Findings

The scanner identified 1132 distinct pattern matches across 18 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.

Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.

Over-Commented Block869 hits · 768 pts

Severity	File	Line	Snippet	Context
LOW	documentation/file_formats/SubGhzFileFormats.md	301	#Custom_preset_name: AM_2	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1	# Doxyfile 1.10.0	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	21	# Use doxygen to compare the used configuration file with the template	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	41	# project for which the documentation is generated. This name is used in the	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	61	# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	81	# and will distribute the generated files over these directories. Enabling this	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	101	# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	121		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	161	# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	181	FULL_PATH_NAMES = NO	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	201		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	221	# such as	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	241	# to treat a multi-line C++ comment block as a detailed description. Set this	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	261		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	281	# "sideeffect=@par Side Effects:^^"	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	301		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	321		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	341	# use: inc=Fortran f=C.	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	361	MARKDOWN_SUPPORT = YES	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	381	MARKDOWN_ID_STYLE = DOXYGEN	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	401	# If you use Microsoft's C++/CLI language, you should set this option to YES to	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	421	# The default value is: YES.	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	441	# (for instance a group of public functions) to be put as a subgroup of that	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	461	# with only public data fields or simple typedef fields will be shown inline in	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	481	# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	501	# encounter. Generating dot graphs in parallel is controlled by the	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	521	# class members and static file members will be hidden unless the	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	541	# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	561	# This flag is only useful for Objective-C code. If set to YES, local methods,	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	581	# The default value is: YES.	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	601		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	621	INTERNAL_DOCS = NO	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	641	# their full class and namespace scopes in the documentation. If set to YES, the	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	661	# the files that are included by a file in the documentation of that file.	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	681	# The default value is: YES.	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	701	# (brief and detailed) documentation of class members so that constructors and	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	721	# be sorted only by class name, not including the namespace part.	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	741	# The default value is: YES.	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	761		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	781	# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	801		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	821	# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	841	# standard output by doxygen. If QUIET is set to YES this implies that the	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	861	WARN_IF_UNDOCUMENTED = NO	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	881	# documentation, but not about the absence of documentation. If EXTRACT_ALL is	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	901	# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined doxygen will not	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	921	WARN_FORMAT = "$file:$line: $text"	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	961	# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	981	# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1081	# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1101		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1121	# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1141	# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1161	# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1181	# Minimum value: 7, maximum value: 10000, default value: 72.	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1201	# The default value is: NO.	COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1221		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1241		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1261		COMMENT
LOW	documentation/doxygen/Doxyfile.cfg	1281	ALPHABETICAL_INDEX = YES	COMMENT
809 more matches not shown…

Cross-Language Confusion (JS/TS)64 hits · 452 pts

Severity	File	Line	Snippet	Context
HIGH⚡	…ons/system/js_app/examples/apps/Scripts/stringutils.js	4	print(lengthOfText);	CODE
HIGH⚡	…ons/system/js_app/examples/apps/Scripts/stringutils.js	9	print(substringResult);	CODE
HIGH⚡	…ons/system/js_app/examples/apps/Scripts/stringutils.js	13	print(result2);	CODE
HIGH⚡	…ons/system/js_app/examples/apps/Scripts/stringutils.js	16	print(upperCaseText);	CODE
HIGH⚡	…ons/system/js_app/examples/apps/Scripts/stringutils.js	19	print(lowerCaseText);	CODE
HIGH	…cations/system/js_app/examples/apps/Scripts/console.js	1	print("print", 1);	CODE
HIGH⚡	…/system/js_app/examples/apps/Scripts/array_buf_test.js	2	print("len =", arr_1.buffer.byteLength);	CODE
HIGH⚡	…/system/js_app/examples/apps/Scripts/array_buf_test.js	5	print("slice len =", arr_2.buffer.byteLength);	CODE
HIGH⚡	…/system/js_app/examples/apps/Scripts/array_buf_test.js	7	print(arr_2[i]);	CODE
HIGH	…ons/system/js_app/examples/apps/Scripts/badusb_demo.js	32	print("USB is connected");	CODE
HIGH	…ons/system/js_app/examples/apps/Scripts/badusb_demo.js	58	print("USB not connected");	CODE
HIGH	…tions/system/js_app/examples/apps/Scripts/uart_echo.js	9	print("0x" + data_view[0].toString(16));	CODE
HIGH	…plications/system/js_app/examples/apps/Scripts/load.js	3	print(result);	CODE
HIGH	…s/system/js_app/examples/apps/Scripts/uart_echo_8e1.js	13	print("0x" + data_view[0].toString(16));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	3	print("math.abs(-5):", math.abs(-5));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	4	print("math.acos(0.5):", math.acos(0.5));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	5	print("math.acosh(2):", math.acosh(2));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	6	print("math.asin(0.5):", math.asin(0.5));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	7	print("math.asinh(2):", math.asinh(2));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	8	print("math.atan(1):", math.atan(1));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	9	print("math.atan2(1, 1):", math.atan2(1, 1));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	10	print("math.atanh(0.5):", math.atanh(0.5));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	11	print("math.cbrt(27):", math.cbrt(27));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	12	print("math.ceil(5.3):", math.ceil(5.3));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	13	print("math.clz32(1):", math.clz32(1));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	14	print("math.cos(math.PI):", math.cos(math.PI));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	15	print("math.exp(1):", math.exp(1));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	16	print("math.floor(5.7):", math.floor(5.7));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	17	print("math.max(3, 5):", math.max(3, 5));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	18	print("math.min(3, 5):", math.min(3, 5));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	19	print("math.pow(2, 3):", math.pow(2, 3));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	20	print("math.random():", math.random());	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	21	print("math.sign(-5):", math.sign(-5));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	22	print("math.sin(math.PI/2):", math.sin(math.PI / 2));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	23	print("math.sqrt(25):", math.sqrt(25));	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/math.js	24	print("math.trunc(5.7):", math.trunc(5.7));	CODE
HIGH⚡	…ations/system/js_app/examples/apps/Scripts/bad_uart.js	8	print("No CLI response");	CODE
HIGH⚡	…ations/system/js_app/examples/apps/Scripts/bad_uart.js	16	print("key:", serial.readln());	CODE
HIGH⚡	…ations/system/js_app/examples/apps/Scripts/bad_uart.js	18	print("uci cmd not found");	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/path.js	3	print("script has __dirname of" + __dirname);	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/path.js	4	print("script has __filename of" + __filename);	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/path.js	6	print("math.js exist here.");	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/path.js	8	print("math.js does not exist here.");	CODE
HIGH⚡	…ions/system/js_app/examples/apps/Scripts/event_loop.js	5	print("Hi after 1337 ms");	CODE
HIGH⚡	…ions/system/js_app/examples/apps/Scripts/event_loop.js	10	print("Counter two:", counter);	CODE
HIGH⚡	…ions/system/js_app/examples/apps/Scripts/event_loop.js	19	print("Counter one:", counter);	CODE
HIGH	…ons/system/js_app/examples/apps/Scripts/interactive.js	91	print("If you're stuck here, something went wrong, re-run the script")	CODE
HIGH	…ons/system/js_app/examples/apps/Scripts/interactive.js	93	print("\n\nFinished correctly :)")	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/gpio.js	14	print("Commencing blinking (PC3)");	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/gpio.js	21	print("Commencing PWM (PA7)");	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/gpio.js	28	print("Press the button (PC1)");	CODE
HIGH⚡	…plications/system/js_app/examples/apps/Scripts/gpio.js	30	print("PC0 is at", pot.readAnalog(), "mV");	CODE
HIGH⚡	…cations/system/js_app/examples/apps/Scripts/storage.js	4	print("File exists:", storage.fileExists(path));	CODE
HIGH⚡	…cations/system/js_app/examples/apps/Scripts/storage.js	6	print("Writing...");	CODE
HIGH⚡	…cations/system/js_app/examples/apps/Scripts/storage.js	11	print("File exists:", storage.fileExists(path));	CODE
HIGH⚡	…cations/system/js_app/examples/apps/Scripts/storage.js	17	print("Reading...");	CODE
HIGH⚡	…cations/system/js_app/examples/apps/Scripts/storage.js	21	print(text);	CODE
HIGH⚡	…cations/system/js_app/examples/apps/Scripts/storage.js	23	print("Removing...")	CODE
HIGH⚡	…cations/system/js_app/examples/apps/Scripts/storage.js	26	print("Done")	CODE
HIGH⚡	…lications/system/js_app/examples/apps/Scripts/delay.js	1	print("start");	CODE
4 more matches not shown…

Decorative Section Separators38 hits · 90 pts

Severity	File	Line	Snippet	Context
MEDIUM⚡	documentation/doxygen/Doxyfile.cfg	2293	#---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	documentation/doxygen/Doxyfile.cfg	2295	#---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	documentation/doxygen/Doxyfile.cfg	2305	#---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	documentation/doxygen/Doxyfile.cfg	2307	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	26	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	28	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	515	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	517	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	836	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	838	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	942	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	944	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1185	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1187	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1272	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1274	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1292	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1294	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1958	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1960	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2141	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2143	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2197	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2199	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2241	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2243	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2275	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2277	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2331	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2333	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2369	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2371	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2448	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2450	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2494	#---------------------------------------------------------------------------	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	2496	#---------------------------------------------------------------------------	COMMENT
MEDIUM	applications/system/snake_game/snake_game.c	414	// ┌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┐	COMMENT
MEDIUM	applications/system/snake_game/snake_game.c	430	// └╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌┘	COMMENT

Excessive Try-Catch Wrapping40 hits · 52 pts

Severity	File	Line	Snippet	Context
LOW	scripts/update.py	258	except Exception as e:	CODE
LOW	scripts/send_firebase_notification.py	11	except Exception as e:	CODE
LOW	scripts/send_firebase_notification.py	22	except Exception as e:	CODE
MEDIUM	scripts/send_firebase_notification.py	7	def __init__(self, service_account_file):	CODE
MEDIUM	scripts/send_firebase_notification.py	15	def send(self, title, body, condition):	CODE
LOW	scripts/selfupdate.py	63	except Exception as e:	CODE
LOW	scripts/hs.py	119	except Exception as e:	CODE
LOW	scripts/runfap.py	98	except Exception as e:	CODE
LOW	scripts/assets.py	278	except Exception as e:	STRING
LOW	scripts/storage.py	18	except Exception as e:	CODE
MEDIUM	scripts/storage.py	19	print(f"Error: {e}")	CODE
LOW	scripts/storage.py	125	except Exception:	CODE
MEDIUM	scripts/storage.py	14	def wrapper(args, *kwargs):	CODE
LOW	scripts/slideshow.py	37	except Exception as e:	CODE
LOW	scripts/testops.py	137	except Exception as e:	CODE
LOW	scripts/sconsdist.py	123	except Exception as ex:	CODE
LOW	scripts/wifi_board.py	52	except Exception as e:	CODE
LOW	scripts/wifi_board.py	75	except Exception as e:	CODE
LOW	scripts/wifi_board.py	173	except Exception as e:	CODE
LOW	scripts/wifi_board.py	204	except Exception as e:	CODE
MEDIUM	scripts/wifi_board.py	166	def update(self):	CODE
LOW	scripts/fwflash.py	255	except Exception:	CODE
MEDIUM	scripts/fwflash.py	251	def _valid_ip(self, address):	CODE
LOW	scripts/fbt_tools/fbt_apps.py	119	except Exception:	CODE
LOW	scripts/fbt_tools/fbt_apps.py	140	except Exception as e:	CODE
MEDIUM	scripts/fbt_tools/fbt_apps.py	113	def LoadAppManifest(env, entry):	CODE
LOW	scripts/flipper/storage.py	177	except Exception:	CODE
LOW	scripts/flipper/storage.py	220	except Exception:	CODE
LOW	scripts/flipper/utils/openocd.py	114	except Exception as e:	CODE
LOW	scripts/flipper/utils/openocd.py	123	except Exception as e:	CODE
LOW	scripts/fbt/version.py	29	except Exception as e:	CODE
MEDIUM	scripts/fbt/version.py	12	def get_fast_git_version_id():	CODE
LOW	scripts/fbt/appmanifest.py	226	except Exception as e:	CODE
LOW⚡	scripts/debug/FreeRTOS/FreeRTOSgdb/Task.py	30	except Exception as exc:	CODE
MEDIUM⚡	scripts/debug/FreeRTOS/FreeRTOSgdb/Task.py	31	print("Error Initializing Task Inspector: %s" % str(exc))	CODE
LOW⚡	scripts/debug/FreeRTOS/FreeRTOSgdb/Task.py	38	except Exception as exc:	CODE
LOW	scripts/debug/FreeRTOS/FreeRTOSgdb/List.py	33	except Exception as exc:	CODE
MEDIUM	scripts/debug/FreeRTOS/FreeRTOSgdb/List.py	26	def Assign(self, listObj):	CODE
LOW	scripts/debug/FreeRTOS/FreeRTOSgdb/QueueTools.py	103	except Exception as exc:	CODE
LOW	scripts/debug/PyCortexMDebug/cmdebug/svd_gdb.py	102	except Exception as e:	CODE

Empty Error Handlers7 hits · 35 pts

Severity	File	Line	Snippet	Context
HIGH	scripts/testops.py	133	except:	CODE
HIGH	scripts/guruguru.py	40	except KeyboardInterrupt:	CODE
HIGH	scripts/fbt_tools/openocd.py	41	except KeyError:	CODE
HIGH	scripts/fbt_tools/fwbin.py	70	except KeyError:	CODE
HIGH	scripts/debug/FreeRTOS/FreeRTOSgdb/List.py	33	except Exception as exc:	CODE
HIGH	scripts/debug/PyCortexMDebug/cmdebug/svd_gdb.py	53	except:	CODE
HIGH	scripts/debug/PyCortexMDebug/cmdebug/svd.py	413	except ValueError:	CODE

Deep Nesting28 hits · 28 pts

Severity	File	Line	Context
LOW	scripts/fastfap.py	70	CODE
LOW	scripts/imglint.py	57	CODE
LOW	scripts/runfap.py	45	CODE
LOW	scripts/assets.py	118	CODE
LOW	scripts/storage.py	148	CODE
LOW	scripts/testops.py	76	CODE
LOW	scripts/sconsdist.py	159	CODE
LOW	scripts/wifi_board.py	166	CODE
LOW	scripts/fwflash.py	166	CODE
LOW	scripts/infrared.py	20	CODE
LOW	scripts/lint.py	51	CODE
LOW	scripts/lint.py	68	CODE
LOW	scripts/fbt_tools/fbt_extapps.py	441	CODE
LOW	scripts/fbt_tools/fbt_extapps.py	142	CODE
LOW	scripts/fbt_tools/pvsstudio.py	28	CODE
LOW	scripts/flipper/utils/templite.py	93	CODE
LOW	scripts/ufbt/site_init.py	8	CODE
LOW	scripts/fbt/appmanifest.py	417	CODE
LOW	scripts/fbt/sdk/collector.py	107	CODE
LOW	scripts/fbt/sdk/cache.py	170	CODE
LOW	scripts/debug/FreeRTOS/FreeRTOSgdb/List.py	45	CODE
LOW	scripts/debug/FreeRTOS/FreeRTOSgdb/HandleRegistry.py	50	CODE
LOW	scripts/debug/PyCortexMDebug/cmdebug/svd_gdb.py	118	CODE
LOW	scripts/debug/PyCortexMDebug/cmdebug/svd_gdb.py	165	CODE
LOW	scripts/debug/PyCortexMDebug/cmdebug/svd_gdb.py	208	CODE
LOW	scripts/debug/PyCortexMDebug/cmdebug/svd.py	151	CODE
LOW	scripts/debug/PyCortexMDebug/cmdebug/svd.py	258	CODE
LOW	site_scons/site_init.py	11	CODE

Hyper-Verbose Identifiers23 hits · 23 pts

Severity	File	Line	Snippet	Context
LOW	scripts/fastfap.py	43	def serialize_relsection_data(data: dict[UniqueRelData, list[int]]) -> bytes:	CODE
LOW	scripts/wifi_board.py	159	def find_wifi_board_bootloader_port(self):	CODE
LOW	scripts/wifi_board.py	162	def find_wifi_board_bootloader_port_damn_windows(self):	CODE
LOW	scripts/fwflash.py	218	def blackmagic_find_networked(serial: str):	CODE
LOW	scripts/lint.py	118	def _apply_file_naming_convention(self, sources: list, dry_run: bool = False):	CODE
LOW	scripts/fbt_tools/fbt_extapps.py	218	def _configure_deps_and_aliases(self, app_artifacts: FlipperExternalAppInfo):	CODE
LOW	scripts/fbt_tools/fbt_extapps.py	338	def _embed_app_metadata_emitter(target, source, env):	CODE
LOW	scripts/fbt_tools/fbt_extapps.py	368	def generate_embed_app_metadata_actions(source, target, env, for_signature):	CODE
LOW	scripts/fbt_tools/fbt_resources.py	10	def __generate_resources_dist_entries(env):	CODE
LOW	scripts/fbt_tools/compilation_db.py	61	def changed_since_last_build_node(child, target, prev_ni, node):	CODE
LOW	scripts/fbt_tools/compilation_db.py	77	def emit_compilation_db_entry(target, source, env):	CODE
LOW	scripts/fbt_tools/compilation_db.py	115	def compilation_db_entry_action(target, source, env, **kw):	CODE
LOW	scripts/fbt_tools/fbt_sdk.py	46	def _api_amalgam_gen_origin_header(target, source, env):	CODE
LOW	scripts/fbt_tools/fbt_sdk.py	186	def _deploy_sdk_header_tree_action(target, source, env):	CODE
LOW	scripts/fbt_tools/fbt_sdk.py	191	def _deploy_sdk_header_tree_emitter(target, source, env):	CODE
LOW	scripts/flipper/utils/stm32wb55.py	240	def option_bytes_id_to_address(self, id: int) -> int:	CODE
LOW	scripts/flipper/utils/stm32wb55.py	256	def flash_dump_status_register(self):	CODE
LOW	scripts/fbt/version.py	7	def get_git_commit_unix_timestamp():	CODE
LOW	scripts/fbt/appmanifest.py	326	def _check_if_app_target_supported(self, app_name: str):	CODE
LOW	scripts/fbt/appmanifest.py	374	def get_incompatible_ext_apps(self):	CODE
LOW	scripts/fbt/sdk/collector.py	82	def process_source_file_for_sdk(self, file_path: str):	CODE
LOW	scripts/fbt/sdk/collector.py	93	def stringify_array_dimension(size_descr):	CODE
LOW	site_scons/fbt_extra/util.py	12	def should_gen_cdb_and_link_dir(env, requested_targets):	CODE

Redundant / Tautological Comments14 hits · 21 pts

Severity	File	Line	Snippet	Context
LOW	scripts/wifi_board.py	63	# Check if channel found	COMMENT
LOW	scripts/flipper/utils/stm32wb55.py	145	# Check if flash is already unlocked	COMMENT
LOW	scripts/flipper/utils/stm32wb55.py	156	# Check if flash is unlocked	COMMENT
LOW	scripts/flipper/utils/stm32wb55.py	165	# Check if options is already unlocked	COMMENT
LOW	scripts/flipper/utils/stm32wb55.py	176	# Check if options is unlocked	COMMENT
LOW	scripts/flipper/utils/stm32wb55.py	185	# Check if options is already locked	COMMENT
LOW	scripts/flipper/utils/stm32wb55.py	196	# Check if options is locked	COMMENT
LOW	scripts/flipper/utils/stm32wb55.py	205	# Check if flash is already locked	COMMENT
LOW	scripts/flipper/utils/stm32wb55.py	216	# Check if flash is locked	COMMENT
LOW	scripts/flipper/utils/stm32wb55.py	241	# Check if this option byte (dword) is mapped to a register	COMMENT
LOW	scripts/flipper/utils/programmer_openocd.py	186	# Check if this option byte (dword) is mapped to a register	COMMENT
LOW	scripts/flipper/utils/programmer_openocd.py	212	# Open file, check that it aligned to 8 bytes	COMMENT
LOW	scripts/fbt/fapassets.py	81	# Write files count	COMMENT
LOW	scripts/fbt/fapassets.py	102	# Write files	COMMENT

Self-Referential Comments7 hits · 21 pts

Severity	File	Line	Snippet	Context
MEDIUM	scripts/debug/FreeRTOS/FreeRTOS.py	6	# This file contains some python code that utilizes the GDB API	COMMENT
MEDIUM	scripts/debug/FreeRTOS/FreeRTOSgdb/Task.py	6	# This file contains the implementation of a class to use for	COMMENT
MEDIUM	scripts/debug/FreeRTOS/FreeRTOSgdb/List.py	6	# This file contains the class for inspecting	COMMENT
MEDIUM	scripts/debug/FreeRTOS/FreeRTOSgdb/EventGroup.py	6	# This file contains the implementation of a Event Group Inspector	COMMENT
MEDIUM	scripts/debug/FreeRTOS/FreeRTOSgdb/Types.py	6	# This file contains the implementation of some	COMMENT
MEDIUM	scripts/debug/FreeRTOS/FreeRTOSgdb/QueueTools.py	6	# This file contains the implementation of a Queue Inspector	COMMENT
MEDIUM	scripts/debug/FreeRTOS/FreeRTOSgdb/GDBCommands.py	6	# This file contains the implementation of some custom	COMMENT

Slop Phrases7 hits · 16 pts

Severity	File	Line	Snippet	Context
MEDIUM	documentation/doxygen/Doxyfile.cfg	343	# Note: For files without extension you can use no_extension as a placeholder.	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	980	# If the value of the INPUT tag contains directories, you can use the	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1072	# If the value of the INPUT tag contains directories, you can use the	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1095	# If the value of the EXAMPLE_PATH tag contains directories, you can use the	COMMENT
LOW	applications/services/gui/view.h	202	* @warning Don't forget to commit model changes	COMMENT
LOW	lib/drivers/bq27220.h	21	* - Don't forget to reset chip before writing new config.	COMMENT
LOW	lib/mjs/mjs_gc.c	316	* If we ever bring it back, don't forget to mark it	COMMENT

Cross-File Repetition3 hits · 15 pts

Severity	File	Snippet	Context
HIGH	scripts/debug/PyCortexMDebug/PyCortexMDebug.py	this file is part of pycortexmdebug pycortexmdebug is free software: you can redistribute it and/or modify it under the	STRING
HIGH	scripts/debug/PyCortexMDebug/cmdebug/svd_gdb.py	this file is part of pycortexmdebug pycortexmdebug is free software: you can redistribute it and/or modify it under the	STRING
HIGH	scripts/debug/PyCortexMDebug/cmdebug/svd.py	this file is part of pycortexmdebug pycortexmdebug is free software: you can redistribute it and/or modify it under the	STRING

Unused Imports12 hits · 12 pts

Severity	File	Line	Context
LOW	scripts/update.py	12	CODE
LOW	scripts/serial_cli_perf.py	4	CODE
LOW	scripts/assets.py	4	CODE
LOW	scripts/testops.py	7	CODE
LOW	scripts/power.py	6	CODE
LOW	scripts/infrared.py	3	CODE
LOW	scripts/infrared.py	6	CODE
LOW	scripts/debug/FreeRTOS/FreeRTOS.py	22	CODE
LOW	scripts/debug/FreeRTOS/FreeRTOS.py	24	CODE
LOW	scripts/debug/FreeRTOS/FreeRTOSgdb/HandleRegistry.py	12	CODE
LOW	scripts/debug/FreeRTOS/FreeRTOSgdb/GDBCommands.py	14	CODE
LOW	scripts/debug/PyCortexMDebug/cmdebug/svd_gdb.py	22	CODE

Verbosity Indicators7 hits · 10 pts

Severity	File	Line	Snippet	Context
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1187	// Step 1: Perform full authentication once	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1242	// Step 2: Perform nested authentication multiple times	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1411	// Step 1: Perform full authentication once	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1427	// Step 2: Perform nested authentication a variable number of times to get nt_enc at a different PRNG offset	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1644	// Step 1: Perform full authentication once	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1661	// Step 2: Collect nested nt and parity	COMMENT
LOW	lib/mjs/common/str_util.h	151	* The purpose of this function is to parse comma separated string without	COMMENT

Structural Annotation Overuse6 hits · 9 pts

Severity	File	Line	Snippet	Context
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1187	// Step 1: Perform full authentication once	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1242	// Step 2: Perform nested authentication multiple times	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1411	// Step 1: Perform full authentication once	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1427	// Step 2: Perform nested authentication a variable number of times to get nt_enc at a different PRNG offset	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1644	// Step 1: Perform full authentication once	COMMENT
LOW	lib/nfc/protocols/mf_classic/mf_classic_poller.c	1661	// Step 2: Collect nested nt and parity	COMMENT

AI Slop Vocabulary2 hits · 3 pts

Severity	File	Line	Snippet	Context
MEDIUM	documentation/doxygen/Doxyfile.cfg	1352	# it is more robust and this tag (HTML_STYLESHEET) will in the future become	COMMENT
MEDIUM	documentation/doxygen/Doxyfile.cfg	1362	# standard style sheet and is therefore more robust against future updates.	COMMENT

AI Structural Patterns2 hits · 2 pts

Severity	File	Line	Snippet	Context
LOW	scripts/flipper/utils/openocd.py	144		CODE
LOW	scripts/flipper/utils/openocd.py	169		CODE

Fake / Example Data2 hits · 2 pts

Severity	File	Line	Snippet	Context
LOW	applications/system/js_app/examples/apps/Scripts/gui.js	59	text: "This is a very long string that demonstrates the TextBox view. Use the D-Pad to scroll backwards and forw	CODE
LOW	applications/system/js_app/examples/apps/Scripts/gui.js	59	text: "This is a very long string that demonstrates the TextBox view. Use the D-Pad to scroll backwards and forw	CODE

Modern Structural Boilerplate1 hit · 1 pts

Severity	File	Line	Snippet	Context
LOW	scripts/debug/flipperapps.py	243	def set_debug_mode(self, mode: bool) -> None:	CODE

flipperdevices/flipperzero-firmware

Open-Source Code Quality, Security and Technical Debt Review