2.1

Adjusted Signal

2.1

Raw Pattern Score

100%

Time Factor

2026-10-31

Last Push

6.5K

Stars

Language

901.3K

Lines of Code

4.6K

Files

1.4K

Pattern Hits

2026-10-31

Scan Date

0.00

HC Hit Rate

Risk Review · Payload v1

Use each vector to guide manual verification of the underlying findings.

Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.

Cognitive Ownership Risk 7.7/100 · LOW

Can maintainers explain intent, assumptions, and trade-offs? 1235 finding(s).

Hallucinated Dependency & Supply Chain Risk 0.6/100 · LOW

Are imports declared and package/API names verified? 14 finding(s).

Agent Over-Engineering Ratio 2.6/100 · LOW

Are wrappers, guards, and repeated structures necessary? 196 finding(s).

PR Review Velocity Impact 9.0/100 · LOW

Which changes need focused human review? 1353 finding(s).

What These Metrics Mean

Adjusted Signal: Legacy pattern score normalized per 1,000 scanned lines and multiplied by the repository-level time factor. It is not an estimate of AI authorship.
Raw Pattern Score: Sum of severity- and context-weighted pattern findings before applying the time factor.
Time Factor: A coarse multiplier based on repository last-push metadata. It does not identify when individual code was written.
Pattern Hits: Count of configured pattern findings. Review each location and surrounding code before acting.
HC Hit Rate: High- and critical-severity findings per scanned file. Severity is a configured detector weight, not proof of a vulnerability or authorship.
Lines / Files: Scan coverage denominators used by the legacy normalized score.

Pattern-Signal History

This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.

Severity Breakdown

Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.

CRITICAL 9HIGH 3MEDIUM 129LOW 1212

Directory Score Breakdown

This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.

Pattern Findings

The scanner identified 1353 distinct pattern matches across 17 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.

Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.

Over-Commented Block987 hits · 986 pts

Severity	File	Line	Snippet	Context
LOW	op-test-sequencer/sequencer/backend/work/iface.go	121	// Prebuilt inserts a pre-built block, skipping block-building.	COMMENT
LOW	op-test-sequencer/sequencer/backend/work/iface.go	141		COMMENT
LOW	op-acceptance-tests/tests/glamsterdam_test.go	201	t.Require().Equal(sequencerUnsafe.ID(), verifierUnsafe.ID(),	COMMENT
LOW	…tance-tests/tests/safeheaddb_elsync/safeheaddb_test.go	21	cfg.VerifierSyncMode = sync.ELSync	COMMENT
LOW	…ce-tests/tests/superfaultproofs/activation_boundary.go	1	package superfaultproofs	COMMENT
LOW	…tance-tests/tests/superfaultproofs/superfaultproofs.go	41	Cfg *rollup.Config	COMMENT
LOW	…tance-tests/tests/superfaultproofs/superfaultproofs.go	121	g := c.Cfg.Genesis.L2Time	COMMENT
LOW	…tance-tests/tests/superfaultproofs/superfaultproofs.go	521	DisputedClaim: padding(consolidateStep),	COMMENT
LOW	…tance-tests/tests/superfaultproofs/superfaultproofs.go	541	// block. Tests 1 / 2 / 3 all assert valid TransitionState (rollover); test 4	COMMENT
LOW	…tance-tests/tests/superfaultproofs/superfaultproofs.go	921	// l1HeadCurrent. The boundary block's batch lands on L1 only after	COMMENT
LOW	…cceptance-tests/tests/interop/seqwindow/expiry_test.go	81		COMMENT
LOW	op-acceptance-tests/tests/interop/loadtest/doc.go	1	// Package loadtest contains interop load tests that run against sysgo networks	COMMENT
LOW	op-acceptance-tests/tests/interop/loadtest/doc.go	21	// Both schedulers decrease throughput if errors are encountered. They exit successfully upon	COMMENT
LOW	…ance-tests/tests/interop/filter/interop_filter_test.go	101	//	COMMENT
LOW	op-acceptance-tests/tests/sdm/init_test.go	81	excessiveRefundTarget string,	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_elp2p/sync_test.go	21	//	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_elp2p/sync_test.go	41	// Enabling ELP2P and eventual validation:	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_elp2p/sync_test.go	61	//	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_elp2p/sync_test.go	81	startNum := sys.L2ELB.BlockRefByLabel(eth.Unsafe).Number	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_elp2p/sync_test.go	161	// Example logs from L2EL(geth)	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_elp2p/sync_test.go	181	// FCU to target block which cannot be validated	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_elp2p/sync_test.go	241	sys.L2ELB.ForkchoiceUpdate(sys.L2EL, targetNum, 0, 0, nil).IsSyncing()	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_elp2p/sync_test.go	301	t.Cleanup(func() {	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_elp2p/sync_test.go	381	sys.L2CLB.Start()	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_clp2p/sync_test.go	21	// First make verifier reach unsafe tip	COMMENT
LOW	…eptance-tests/tests/sync/elsync/gap_clp2p/sync_test.go	41	// payload itself (e.g., malformed ExtraData). The CL relays this payload through	COMMENT
LOW	op-acceptance-tests/tests/sync/follow_l2/sync_test.go	21	// assertions.go:387: ERROR[03-31\|11:33:11.255]	COMMENT
LOW	…tests/tests/supernode/interop/head_progression_test.go	21	// - SafeL2 <= LocalSafeL2 at all times (the exception to this might be during a node reset where the local safe has t	COMMENT
LOW	…/supernode/interop/reorg/invalid_message_reorg_test.go	21		COMMENT
LOW	…/supernode/interop/reorg/invalid_message_reorg_test.go	41	sysgo.SkipOnOpGeth(t, "op-geth does not adopt the invalid-message replacement on the light path (#21119)")	COMMENT
LOW	op-sync-tester/synctester/backend/sync_tester.go	341	// forkchoiceUpdated processes a forkchoice state update from the consensus	COMMENT
LOW	op-sync-tester/synctester/backend/sync_tester.go	521	}	COMMENT
LOW	op-sync-tester/synctester/backend/sync_tester.go	701	// returning an InvalidParams error if any are missing or improperly shaped.	COMMENT
LOW	op-sync-tester/synctester/backend/elsync/el_sync.go	21	//	COMMENT
LOW	op-batcher/batcher/config.go	81		COMMENT
LOW	op-batcher/batcher/channel_builder_test.go	81	// transaction as first transaction, using the specified chain ID. Both blocks are minimal	COMMENT
LOW	op-batcher/batcher/channel_config.go	21	// channel open. This allows control over how long a channel is kept open	COMMENT
LOW	op-batcher/batcher/channel_builder.go	261	}	COMMENT
LOW	op-batcher/batcher/channel_builder.go	281	// - ErrChannelTimeoutClose if the consensus channel timeout got too close,	COMMENT
LOW	op-batcher/batcher/channel_manager_test.go	401	// blocks->channels pipeline multiple times. Values are chosen such that a channel	COMMENT
LOW	melange/op-stack-rust.yaml	1	# Consolidated build for the Rust services of the optimism monorepo. kona,	COMMENT
LOW	melange/op-stack-go.yaml	1	# Consolidated build for every Go service of the optimism monorepo. One	COMMENT
LOW	op-service/httputil/timeout.go	21	//	COMMENT
LOW	op-service/txmgr/cli.go	641	RetryInterval time.Duration	COMMENT
LOW	op-service/txmgr/txmgr.go	61		COMMENT
LOW	op-service/txmgr/txmgr.go	81	// is ErrAlreadyReserved, which indicates an incompatible transaction may be stuck in the	COMMENT
LOW	op-service/txmgr/txmgr.go	281	// TxData is the transaction calldata to be used in the constructed tx.	COMMENT
LOW	op-service/tri/tri.go	1	// Kleene’s three-valued logic (K3) enlarges classical logic with an “undefined”	COMMENT
LOW	op-service/github/release/provider.go	41	// an error if the version check fails (e.g., version mismatch or command execution error).	COMMENT
LOW	op-service/github/release/provider.go	101	// progressor reports download progress. Optional; may be nil.	COMMENT
LOW	op-service/testlog/testlog.go	1	// Copyright 2019 The go-ethereum Authors	COMMENT
LOW	op-service/cliflags/pathflag.go	1	// Package cliflags holds custom urfave/cli flag value types that are shared	COMMENT
LOW	op-service/sources/types.go	21		COMMENT
LOW	op-service/sources/receipts_rpc.go	141	"provider_kind", f.provKind, "failed_method", m, "fallback", f.availableReceiptMethods&^m, "err", err)	COMMENT
LOW	op-service/sources/receipts_rpc.go	241	// Available in: standard, everywhere.	COMMENT
LOW	op-service/sources/receipts_rpc.go	261	// Method: debug_getRawReceipts	COMMENT
LOW	op-service/sources/receipts_rpc.go	281	// - QuickNode: undocumented.	COMMENT
LOW	op-service/sources/receipts_rpc.go	301	// Erigon has this available, but does not support block-hash argument to the method:	COMMENT
LOW	op-service/log/logger.go	21	// Logger emits structured log records to an slog.Handler. Record attributes are	COMMENT
LOW	op-service/log/logfilter/logfilter.go	121	func (f Selector) Mute() Statement {	COMMENT
927 more matches not shown…

Decorative Section Separators99 hits · 328 pts

Severity	File	Line	Snippet	Context
MEDIUM	…st/kona/crates/node/service/src/service/node/rollup.rs	585	// ─── cross-actor channels ───────────────────────────────────────────────────────────	COMMENT
MEDIUM	…st/kona/crates/node/service/src/service/node/rollup.rs	612	// ─── actor construction ─────────────────────────────────────────────────────────────	COMMENT
MEDIUM⚡	rust/kona/crates/node/engine/src/lib.rs	14	//! ┌─────────────┐ ┌──────────────┐ ┌─────────────┐	COMMENT
MEDIUM⚡	rust/kona/crates/node/engine/src/lib.rs	17	//! └─────────────┘ └──────────────┘ └─────────────┘	COMMENT
MEDIUM⚡	rust/kona/crates/node/engine/src/lib.rs	20	//! ┌─────────────┐ ┌──────────────┐ ┌─────────────┐	COMMENT
MEDIUM⚡	rust/kona/crates/node/engine/src/lib.rs	23	//! └─────────────┘ └──────────────┘ └─────────────┘	COMMENT
MEDIUM	rust/op-reth/crates/trie/src/initialize.rs	1501	// ── RecordingStore spy ─────────────────────────────────────────────	COMMENT
MEDIUM	rust/op-reth/crates/trie/src/initialize.rs	1614	// ── Regression tests: address order must be preserved ──────────────	COMMENT
MEDIUM	rust/op-reth/crates/trie/src/initialize.rs	1691	// ── Source DB with a lagging hashed-state/trie frontier ─────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-sdk-components.ts	15	// ─── SDK path helpers ────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-sdk-components.ts	61	// ─── Type resolution helpers ────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-sdk-components.ts	122	// ─── Class / method traversal ────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-sdk-components.ts	189	// ─── JSDoc helpers ───────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-sdk-components.ts	294	// ─── MDX generation ──────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-sdk-components.ts	434	// ─── Public processComponent ─────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-releases.ts	10	// ─── Types ────────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-releases.ts	34	// ─── Configuration ────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-releases.ts	40	// ── optimism repo ──────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-releases.ts	156	// ── infra repo ─────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-releases.ts	179	// ─── GitHub API ───────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-releases.ts	230	// ─── MDX helpers ─────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-releases.ts	384	// ─── Per-component page ───────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-releases.ts	451	// ─── Index page ───────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/generate-releases.ts	491	// ─── Main ─────────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-nav.ts	51	// ─── N1: duplicate nav entries ────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-nav.ts	76	// ─── N2: nav entries without a file ───────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-nav.ts	84	// ─── N3: orphans (pages on disk missing from nav) ─────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-nav.ts	114	// ─── N4: allowlist hygiene ────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/common.ts	11	// ─── Docs root resolution ─────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/common.ts	47	// ─── Path containment ─────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/common.ts	64	// ─── docs.json ────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/common.ts	140	// ─── Filesystem walk ──────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/common.ts	188	// ─── Path helpers ─────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/common.ts	205	// ─── Reporting ────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-redirects.ts	74	// ─── R1: duplicate redirect sources ───────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-redirects.ts	88	// ─── R2 + R3: dead targets and chained redirects ──────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-redirects.ts	106	// ─── R4: redirect sources shadowing live pages ────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-redirects.ts	124	// ─── R5: deleted/moved pages must gain a redirect in the same PR ──────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-redirects.ts	173	// ─── R6: internal links must resolve ──────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-reference.ts	64	// ─── Git tags ─────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-reference.ts	113	// ─── Files ────────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-reference.ts	140	// ─── R1: everything under reference/ is generated ─────────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-reference.ts	163	// ─── R2: no stale or unparseable <Unreleased> callouts ────────────────────────	COMMENT
MEDIUM	docs/public-docs/scripts/lint/validate-reference.ts	222	// ─── R3: manifest tags exist ─────────────────────────────────────────────────	COMMENT
MEDIUM	ops/scripts/test-git-version.sh	20	# ── helpers ────────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	ops/scripts/test-git-version.sh	103	# ── main ───────────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	ops/scripts/test-git-version.sh	156	# ── cleanup & summary ──────────────────────────────────────────────────────────	COMMENT
MEDIUM⚡	op-challenger/game/fault/contracts/oracle.go	402	// ┌─────────────┬────────────────────────────────────────────┐	COMMENT
MEDIUM⚡	op-challenger/game/fault/contracts/oracle.go	404	// ├─────────────┼────────────────────────────────────────────┤	COMMENT
MEDIUM⚡	op-challenger/game/fault/contracts/oracle.go	411	// └─────────────┴────────────────────────────────────────────┘	COMMENT
MEDIUM	.circleci/config.yml	84	# --------------------------------------------------------------------------	COMMENT
MEDIUM	.circleci/config.yml	100	# --------------------------------------------------------------------------	COMMENT
MEDIUM⚡	.circleci/scripts/compute-workflow-conditions.sh	49	# =========================================================	COMMENT
MEDIUM⚡	.circleci/scripts/compute-workflow-conditions.sh	51	# =========================================================	COMMENT
MEDIUM⚡	.circleci/scripts/compute-workflow-conditions.sh	57	# ---------------------------------------------------------	COMMENT
MEDIUM	.circleci/scripts/compute-workflow-conditions.sh	88	# ---------------------------------------------------------	COMMENT
MEDIUM	.circleci/scripts/compute-workflow-conditions.sh	120	# ---------------------------------------------------------	COMMENT
MEDIUM	.circleci/continue/rust-e2e.yml	32	# ============================================================================	COMMENT
MEDIUM	.circleci/continue/rust-e2e.yml	34	# ============================================================================	COMMENT
MEDIUM	.circleci/continue/rust-e2e.yml	118	# ============================================================================	COMMENT
39 more matches not shown…

Hyper-Verbose Identifiers92 hits · 130 pts

Severity	File	Line	Snippet	Context
LOW	op-alt-da/bindings/dataavailabilitychallenge.go	553	// Solidity: function variableResolutionCostPrecision() view returns(uint256)	COMMENT
LOW	op-alt-da/bindings/dataavailabilitychallenge.go	570	// Solidity: function variableResolutionCostPrecision() view returns(uint256)	COMMENT
LOW	op-alt-da/bindings/dataavailabilitychallenge.go	577	// Solidity: function variableResolutionCostPrecision() view returns(uint256)	COMMENT
LOW⚡	op-alt-da/bindings/dataavailabilitychallenge.go	741	// Solidity: function setResolverRefundPercentage(uint256 _resolverRefundPercentage) returns()	COMMENT
LOW⚡	op-alt-da/bindings/dataavailabilitychallenge.go	748	// Solidity: function setResolverRefundPercentage(uint256 _resolverRefundPercentage) returns()	COMMENT
LOW⚡	op-alt-da/bindings/dataavailabilitychallenge.go	755	// Solidity: function setResolverRefundPercentage(uint256 _resolverRefundPercentage) returns()	COMMENT
LOW	rust/scripts/test_upstream_mirrors.py	39	def test_rejects_invalid_semver(self) -> None:	CODE
LOW	rust/scripts/test_upstream_mirrors.py	48	def test_validates_reth_tokens(self) -> None:	CODE
LOW	rust/scripts/test_upstream_mirrors.py	76	def test_lockfile_preserves_duplicate_versions(self) -> None:	CODE
LOW	rust/scripts/test_upstream_mirrors.py	497	def test_tree_tags_are_found_and_classify_without_errors(self) -> None:	CODE
LOW	rust/scripts/test_upstream_mirrors.py	513	def test_mirrors_recipe_maps_stale_anywhere_in_the_arguments(self) -> None:	CODE
LOW⚡	rust/scripts/test_upstream_mirrors.py	284	def test_invalid_cratesio_version_is_malformed(self) -> None:	STRING
LOW⚡	rust/scripts/test_upstream_mirrors.py	288	def test_duplicate_locked_versions_are_ambiguous(self) -> None:	STRING
LOW⚡	rust/scripts/test_upstream_mirrors.py	295	def test_duplicate_locked_versions_resolve_to_the_workspace_range(self) -> None:	STRING
LOW⚡	rust/scripts/test_upstream_mirrors.py	401	def test_reth_member_crate_with_a_pin_token_names_the_family(self) -> None:	STRING
LOW⚡	rust/scripts/test_upstream_mirrors.py	408	def test_reth_named_cratesio_crates_keep_their_semver(self) -> None:	STRING
LOW⚡	rust/scripts/test_upstream_mirrors.py	412	def test_check_output_names_bad_tag(self) -> None:	STRING
LOW⚡	rust/scripts/test_upstream_mirrors.py	461	def test_check_fails_when_the_tree_has_no_tags(self) -> None:	STRING
LOW⚡	rust/scripts/test_upstream_mirrors.py	471	def test_listing_no_tags_is_not_an_error(self) -> None:	STRING
LOW⚡	rust/scripts/test_upstream_mirrors.py	481	def test_check_fails_closed_on_unknown_status(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	95	def test_lockfile_ignores_non_cratesio_packages(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	111	def test_reth_pin_requires_one_consistent_source(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	129	def test_reth_manifest_tag_accepts_release_and_fork_tags(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	142	def test_reth_manifest_tag_requires_release_or_fork_tag(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	154	def test_reth_pin_compares_complete_revisions(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	165	def test_reth_pin_rejects_missing_or_ambiguous_repo(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	180	def test_find_tags_propagates_unreadable_file(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	189	def test_find_tags_parses_single_line_and_wrapped_tags(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	225	def test_find_tags_ignores_non_doc_mentions(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	234	def test_find_tags_ignores_fenced_doc_examples(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	255	def test_prose_wrapped_onto_the_tag_line_names_the_blank_doc_line(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	307	def test_unselective_workspace_requirements_stay_ambiguous(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	325	def test_reth_statuses_and_token_validation(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	336	def test_reth_release_build_metadata_is_not_ahead(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	345	def test_reth_fork_tag_statuses(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	365	def test_port_statuses_for_cratesio_and_reth(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	382	def test_port_ahead_of_the_pin_is_an_error(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	390	def test_stale_only_excludes_frozen_and_errors(self) -> None:	STRING
LOW	rust/scripts/test_upstream_mirrors.py	449	def test_stale_check_includes_bad_diagnostics(self) -> None:	STRING
LOW	rust/scripts/upstream-mirrors.py	340	def narrow_to_workspace_range(versions: set[str], requirement: str \| None) -> set[str]:	CODE
LOW	op-e2e/bindingspreview/optimismportal2.go	315	// Solidity: function disputeGameFinalityDelaySeconds() view returns(uint256)	COMMENT
LOW	op-e2e/bindingspreview/optimismportal2.go	332	// Solidity: function disputeGameFinalityDelaySeconds() view returns(uint256)	COMMENT
LOW	op-e2e/bindingspreview/optimismportal2.go	339	// Solidity: function disputeGameFinalityDelaySeconds() view returns(uint256)	COMMENT
LOW	op-e2e/bindingspreview/optimismportal2.go	582	// Solidity: function proofMaturityDelaySeconds() view returns(uint256)	COMMENT
LOW	op-e2e/bindingspreview/optimismportal2.go	599	// Solidity: function proofMaturityDelaySeconds() view returns(uint256)	COMMENT
LOW	op-e2e/bindingspreview/optimismportal2.go	606	// Solidity: function proofMaturityDelaySeconds() view returns(uint256)	COMMENT
LOW	op-e2e/bindingspreview/optimismportal2.go	720	// Solidity: function respectedGameTypeUpdatedAt() view returns(uint64)	COMMENT
LOW	op-e2e/bindingspreview/optimismportal2.go	737	// Solidity: function respectedGameTypeUpdatedAt() view returns(uint64)	COMMENT
LOW	op-e2e/bindingspreview/optimismportal2.go	744	// Solidity: function respectedGameTypeUpdatedAt() view returns(uint64)	COMMENT
LOW⚡	op-e2e/bindingspreview/optimismportal2.go	907	// Solidity: function finalizeWithdrawalTransaction((uint256,address,address,uint256,uint256,bytes) _tx) returns()	COMMENT
LOW⚡	op-e2e/bindingspreview/optimismportal2.go	914	// Solidity: function finalizeWithdrawalTransaction((uint256,address,address,uint256,uint256,bytes) _tx) returns()	COMMENT
LOW⚡	op-e2e/bindingspreview/optimismportal2.go	921	// Solidity: function finalizeWithdrawalTransaction((uint256,address,address,uint256,uint256,bytes) _tx) returns()	COMMENT
LOW⚡	op-e2e/bindingspreview/optimismportal2.go	928	// Solidity: function finalizeWithdrawalTransactionExternalProof((uint256,address,address,uint256,uint256,bytes) _tx, ad	COMMENT
LOW⚡	op-e2e/bindingspreview/optimismportal2.go	935	// Solidity: function finalizeWithdrawalTransactionExternalProof((uint256,address,address,uint256,uint256,bytes) _tx, ad	COMMENT
LOW⚡	op-e2e/bindingspreview/optimismportal2.go	942	// Solidity: function finalizeWithdrawalTransactionExternalProof((uint256,address,address,uint256,uint256,bytes) _tx, ad	COMMENT
LOW⚡	op-e2e/bindingspreview/optimismportal2.go	970	// Solidity: function proveWithdrawalTransaction((uint256,address,address,uint256,uint256,bytes) _tx, uint256 _disputeGa	COMMENT
LOW⚡	op-e2e/bindingspreview/optimismportal2.go	977	// Solidity: function proveWithdrawalTransaction((uint256,address,address,uint256,uint256,bytes) _tx, uint256 _disputeGa	COMMENT
LOW⚡	op-e2e/bindingspreview/optimismportal2.go	984	// Solidity: function proveWithdrawalTransaction((uint256,address,address,uint256,uint256,bytes) _tx, uint256 _disputeGa	COMMENT
LOW	op-e2e/bindings/multicall3.go	388	// Solidity: function getCurrentBlockDifficulty() view returns(uint256 difficulty)	COMMENT
LOW	op-e2e/bindings/multicall3.go	405	// Solidity: function getCurrentBlockDifficulty() view returns(uint256 difficulty)	COMMENT
32 more matches not shown…

Structural Annotation Overuse59 hits · 110 pts

Severity	File	Line	Snippet	Context
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	125	// Step 1: Send a valid interop tx — should succeed before failsafe	COMMENT
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	133	// Step 2: Enable failsafe — no wait needed; even if op-reth hasn't polled	COMMENT
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	138	// Step 3: Send another init message and try exec — should fail	COMMENT
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	172	// Step 4: Disable failsafe and wait one block for op-reth's poller to pick up the change	COMMENT
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	176	// Step 5: Verify interop txs recover after failsafe is disabled	COMMENT
LOW	op-service/txmgr/txmgr.go	402	// NOTE: This method SHOULD NOT publish the resulting transaction.	COMMENT
LOW⚡	rust/kona/crates/node/disc/src/driver.rs	198	// Step 1: Start the discovery service.	COMMENT
LOW⚡	rust/kona/crates/node/disc/src/driver.rs	206	// Step 2: Bootstrap the discovery table with bootnodes.	COMMENT
LOW⚡	rust/kona/crates/node/disc/src/driver.rs	213	// Step 3: Forward ENRs in the bootstore to the enr receiver.	COMMENT
LOW	rust/kona/crates/node/disc/src/driver.rs	242	// Step 4: Run the core driver loop.	COMMENT
LOW⚡	rust/kona/tests/proofs/batcher_change_test.go	42	// Step 1: Batcher A (default) submits a batch.	COMMENT
LOW⚡	rust/kona/tests/proofs/batcher_change_test.go	49	// Step 2: Change batcher from A to B (Bob) on L1 and replace env.Batcher.	COMMENT
LOW⚡	rust/kona/tests/proofs/batcher_change_test.go	52	// Step 3: Build L2 blocks adopting the batcher change, submit with batcher B.	COMMENT
LOW⚡	rust/kona/tests/proofs/batcher_change_test.go	58	// Step 4: Run the fault proof program. This re-derives the chain from	COMMENT
LOW	rust/op-reth/crates/trie/src/db/store/cursor/mod.rs	88	// Step 1: Pick the minimum key across both cursors.	COMMENT
LOW⚡	rust/op-reth/crates/trie/src/db/store/cursor/mod.rs	102	// Step 2: Advance whichever cursor(s) produced min_key.	COMMENT
LOW⚡	rust/op-reth/crates/trie/src/db/store/cursor/mod.rs	110	// Step 3: Resolve the value at max_block_number.	COMMENT
LOW	.claude/agents/go-code-reviewer.md	30	## Step 0: Lint before reading the diff	COMMENT
LOW	.claude/agents/go-code-reviewer.md	49	## Step 1: Understand context	COMMENT
LOW	.claude/agents/go-code-reviewer.md	56	## Step 2: Review for correctness	COMMENT
LOW	.claude/agents/go-code-reviewer.md	76	## Step 3: Review for reuse and simplicity	COMMENT
LOW	.claude/agents/go-code-reviewer.md	91	## Step 4: Review the tests	COMMENT
LOW	.claude/agents/rust-code-reviewer.md	38	### Step 0: Always run the project's lint recipe first	COMMENT
LOW⚡	.claude/agents/rust-code-reviewer.md	53	### Step 1: Understand Context	COMMENT
LOW⚡	.claude/agents/rust-code-reviewer.md	58	### Step 2: Analyze Structure	COMMENT
LOW⚡	.claude/agents/rust-code-reviewer.md	64	### Step 3: Evaluate Reuse Opportunities	COMMENT
LOW⚡	.claude/agents/rust-code-reviewer.md	70	### Step 4: Suggest Improvements	COMMENT
LOW	.claude/skills/fix-todo/SKILL.md	32	### Step 1: Find the latest scheduled TODO checker job	COMMENT
LOW	.claude/skills/fix-todo/SKILL.md	42	### Step 2: Get the workflow and job details	COMMENT
LOW	.claude/skills/fix-todo/SKILL.md	72	### Step 3: Fetch the job output to find closed issues	COMMENT
LOW	.claude/skills/fix-todo/SKILL.md	86	### Step 4: Parse the closed issue information	COMMENT
LOW	.claude/skills/fix-todo/SKILL.md	93	### Step 5: Find who closed the issue	COMMENT
LOW	.claude/skills/fix-todo/SKILL.md	139	### Step 6: Read the actual TODO line from the file	COMMENT
LOW	.claude/skills/fix-todo/SKILL.md	143	### Step 7: Reopen the issue with proper attribution	COMMENT
LOW	.claude/skills/fix-rust-fmt/SKILL.md	21	### Step 1: Ensure mise tools are installed	COMMENT
LOW	.claude/skills/fix-rust-fmt/SKILL.md	31	### Step 2: Run the formatter	COMMENT
LOW	docs/public-docs/REDIRECTS_GUIDE.md	31	### Step 1: Open `docs.json`	COMMENT
LOW	docs/public-docs/REDIRECTS_GUIDE.md	35	### Step 2: Find the `redirects` array	COMMENT
LOW	docs/public-docs/REDIRECTS_GUIDE.md	52	### Step 3: Add your redirect	COMMENT
LOW	docs/public-docs/REDIRECTS_GUIDE.md	67	### Step 4: Test locally	COMMENT
LOW	op-chain-ops/interopsmoke/smoke.go	1036	// Step 1: Chain A sends a message whose relayed call emits a log on Chain B.	COMMENT
LOW	op-chain-ops/interopsmoke/smoke.go	1056	// Step 2: Chain B relays it invalidly. The relay executes anyway and emits	COMMENT
LOW	op-chain-ops/interopsmoke/smoke.go	1085	// Step 3: Chain A executes the bounced message, which depends on the invalid	COMMENT
LOW	op-chain-ops/interopsmoke/smoke.go	1145	// Step 4: the invalid block goes, and the cascade must follow.	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	211	// Step 1: Build L1 block #1 and mark it as safe	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	221	// Step 2: Build L1 block #2, mark #2 as safe and #1 as finalized	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	232	// Step 3: Submit batch containing current L2 blocks (will be in L1 block #3)	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	240	// Step 4: Build more L2 blocks and submit another batch (L1 block #4)	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	247	// Step 5: Add more L1 blocks #5, #6	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	255	// Step 6: Finalize the L1 block containing the first batch (#3)	COMMENT
LOW	…/deployer/integration_test/cli/bootstrap_forge_test.go	135	// Step 1: Bootstrap superchain with Forge	COMMENT
LOW	…/deployer/integration_test/cli/bootstrap_forge_test.go	151	// Step 2: Bootstrap implementations with Forge	COMMENT
LOW	ops/scripts/nut-provenance-verify/main.go	54	// Step 1: Verify bundle file exists and hash matches.	COMMENT
LOW	ops/scripts/nut-provenance-verify/main.go	70	// Step 2: Verify the bundle was correctly built from the recorded commit.	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	102	// Step 1: Insert a synthetic block (modified extra data) which is built on the parent of	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	112	// Step 2: compute rewind targets for safe and finalized heads, ensuring they do not move	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	119	// Step 3: FCU to the synthetic block to trigger a reorg, removing the target block from	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	131	// Step 4: re-insert the canonical target payload via engine_newPayload. The previous FCU	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	139	// Step 5: FCU to the actual target block.	COMMENT

Hallucination Indicators9 hits · 90 pts

Severity	File	Line	Snippet	Context
CRITICAL	rust/alloy-op-evm/src/lib.rs	409	if self.inner.0.ctx.tx.tx_type() !=	CODE
CRITICAL	rust/alloy-op-evm/src/lib.rs	414	if self.inner.0.ctx.cfg.spec.is_enabled_in(OpSpecId::ISTHMUS) {	CODE
CRITICAL	rust/op-reth/crates/flashblocks/src/worker.rs	704	assert_eq!(first.pending_state.execution_outcome.result.receipts.len(), 2);	CODE
CRITICAL	rust/op-reth/crates/node/tests/it/derived_attributes.rs	187	let block = payload.execution_payload.payload_inner.payload_inner.payload_inner.clone();	CODE
CRITICAL	op-e2e/interop/supersystem.go	464	return s.worldOutput.L1.Genesis.Config.ChainID.String()	CODE
CRITICAL	op-e2e/actions/helpers/user.go	397	tx, err := s.L1.env.Bindings.OptimismPortal.DepositTransaction(&s.L1.txOpts, toAddr, depositTransferValue, depositGas,	CODE
CRITICAL	op-e2e/actions/helpers/user.go	404	tx, err = s.L1.env.Bindings.OptimismPortal.DepositTransaction(&s.L1.txOpts, toAddr, depositTransferValue, depositGas, i	CODE
CRITICAL	op-e2e/actions/helpers/user.go	503	tx, err := s.L1.env.Bindings.OptimismPortal.ProveWithdrawalTransaction(	CODE
CRITICAL	op-e2e/actions/helpers/user.go	535	tx, err := s.L1.env.Bindings.OptimismPortal.FinalizeWithdrawalTransaction(	CODE

Verbosity Indicators36 hits · 73 pts

Severity	File	Line	Snippet	Context
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	125	// Step 1: Send a valid interop tx — should succeed before failsafe	COMMENT
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	133	// Step 2: Enable failsafe — no wait needed; even if op-reth hasn't polled	COMMENT
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	138	// Step 3: Send another init message and try exec — should fail	COMMENT
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	172	// Step 4: Disable failsafe and wait one block for op-reth's poller to pick up the change	COMMENT
LOW⚡	…ance-tests/tests/interop/filter/interop_filter_test.go	176	// Step 5: Verify interop txs recover after failsafe is disabled	COMMENT
LOW⚡	rust/kona/crates/node/disc/src/driver.rs	198	// Step 1: Start the discovery service.	COMMENT
LOW⚡	rust/kona/crates/node/disc/src/driver.rs	206	// Step 2: Bootstrap the discovery table with bootnodes.	COMMENT
LOW⚡	rust/kona/crates/node/disc/src/driver.rs	213	// Step 3: Forward ENRs in the bootstore to the enr receiver.	COMMENT
LOW	rust/kona/crates/node/disc/src/driver.rs	242	// Step 4: Run the core driver loop.	COMMENT
LOW⚡	rust/kona/tests/proofs/batcher_change_test.go	42	// Step 1: Batcher A (default) submits a batch.	COMMENT
LOW⚡	rust/kona/tests/proofs/batcher_change_test.go	49	// Step 2: Change batcher from A to B (Bob) on L1 and replace env.Batcher.	COMMENT
LOW⚡	rust/kona/tests/proofs/batcher_change_test.go	52	// Step 3: Build L2 blocks adopting the batcher change, submit with batcher B.	COMMENT
LOW⚡	rust/kona/tests/proofs/batcher_change_test.go	58	// Step 4: Run the fault proof program. This re-derives the chain from	COMMENT
LOW	rust/op-reth/crates/trie/src/db/store/cursor/mod.rs	88	// Step 1: Pick the minimum key across both cursors.	COMMENT
LOW⚡	rust/op-reth/crates/trie/src/db/store/cursor/mod.rs	102	// Step 2: Advance whichever cursor(s) produced min_key.	COMMENT
LOW⚡	rust/op-reth/crates/trie/src/db/store/cursor/mod.rs	110	// Step 3: Resolve the value at max_block_number.	COMMENT
LOW	op-chain-ops/interopsmoke/smoke.go	1036	// Step 1: Chain A sends a message whose relayed call emits a log on Chain B.	COMMENT
LOW	op-chain-ops/interopsmoke/smoke.go	1056	// Step 2: Chain B relays it invalidly. The relay executes anyway and emits	COMMENT
LOW	op-chain-ops/interopsmoke/smoke.go	1085	// Step 3: Chain A executes the bounced message, which depends on the invalid	COMMENT
LOW	op-chain-ops/interopsmoke/smoke.go	1145	// Step 4: the invalid block goes, and the cascade must follow.	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	211	// Step 1: Build L1 block #1 and mark it as safe	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	221	// Step 2: Build L1 block #2, mark #2 as safe and #1 as finalized	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	232	// Step 3: Submit batch containing current L2 blocks (will be in L1 block #3)	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	240	// Step 4: Build more L2 blocks and submit another batch (L1 block #4)	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	247	// Step 5: Add more L1 blocks #5, #6	COMMENT
LOW⚡	op-e2e/actions/supernode/rewind_test.go	255	// Step 6: Finalize the L1 block containing the first batch (#3)	COMMENT
LOW	…/deployer/integration_test/cli/bootstrap_forge_test.go	135	// Step 1: Bootstrap superchain with Forge	COMMENT
LOW	…/deployer/integration_test/cli/bootstrap_forge_test.go	151	// Step 2: Bootstrap implementations with Forge	COMMENT
LOW	op-deployer/pkg/deployer/pipeline/init.go	107	// If the state has been applied, we need to check if any immutable	COMMENT
LOW	ops/scripts/nut-provenance-verify/main.go	54	// Step 1: Verify bundle file exists and hash matches.	COMMENT
LOW	ops/scripts/nut-provenance-verify/main.go	70	// Step 2: Verify the bundle was correctly built from the recorded commit.	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	102	// Step 1: Insert a synthetic block (modified extra data) which is built on the parent of	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	112	// Step 2: compute rewind targets for safe and finalized heads, ensuring they do not move	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	119	// Step 3: FCU to the synthetic block to trigger a reorg, removing the target block from	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	131	// Step 4: re-insert the canonical target payload via engine_newPayload. The previous FCU	COMMENT
LOW⚡	…/supernode/chain_container/engine_controller/rewind.go	139	// Step 5: FCU to the actual target block.	COMMENT

AI Slop Vocabulary15 hits · 45 pts

Severity	File	Line	Snippet	Context
MEDIUM	op-service/locks/rwmap.go	10	// although it does not utilize Go generics.	COMMENT
MEDIUM	op-service/sources/batching/test/generic_stub.go	95	// So leverage json.Unmarshal to set the out value correctly.	COMMENT
MEDIUM	op-service/sources/batching/test/abi_stub.go	75	// So leverage json.Unmarshal to set the out value correctly.	COMMENT
MEDIUM	op-up/install.sh	6	# [foundrup]: https://foundry.paradigm.xyz	COMMENT
MEDIUM	op-chain-ops/foundry/sourcefs.go	25	// optionally, the source-map FS can utilize the build-data of a specific compiler-profile.	COMMENT
MEDIUM	op-chain-ops/script/script.go	86	// only known contracts may utilize cheatcodes and logging	COMMENT
MEDIUM	op-chain-ops/script/script.go	322	// AllowCheatcodes allows the given address to utilize the cheatcodes and logging precompiles	COMMENT
MEDIUM	op-chain-ops/genesis/config.go	828	// A production L2 deployment does not utilize this configuration,	COMMENT
MEDIUM	op-node/benchmarks/batchbuilding_test.go	208	// to leverage optimizations in the Batch Linked List	COMMENT
MEDIUM	op-node/benchmarks/batchbuilding_test.go	276	// to leverage optimizations in the Batch Linked List	COMMENT
MEDIUM	op-node/benchmarks/batchbuilding_test.go	337	// to leverage optimizations in the Batch Linked List	COMMENT
MEDIUM	op-node/node/node.go	495	// Ping the Beacon API on startup to be more robust against connection issues.	COMMENT
MEDIUM	op-challenger/game/scheduler/coordinator_test.go	280	// This makes the inflight game metric more robust.	COMMENT
MEDIUM	.circleci/scripts/test-decision-tree.sh	24	# --- Test harness ---	COMMENT
MEDIUM	op-devstack/dsl/operator_fee.go	166	// to make the test robust to any other traffic on the chain.	COMMENT

Redundant / Tautological Comments22 hits · 34 pts

Severity	File	Line	Snippet	Context
LOW	…cceptance-tests/scripts/generate-flaky-tests-report.sh	83	# Check if we got a valid response	COMMENT
LOW	…cceptance-tests/scripts/generate-flaky-tests-report.sh	104	# Check if the response contains flaky_tests	COMMENT
LOW	…cceptance-tests/scripts/generate-flaky-tests-report.sh	178	# Check if HTML file was generated and has content	COMMENT
LOW	justfiles/uptodate.sh	2	# Check if a target file is up to date relative to source files/directories.	COMMENT
LOW	…-docs/create-l2-rollup-example/scripts/setup-rollup.sh	8	# Check if running in Docker	COMMENT
LOW	…-docs/create-l2-rollup-example/scripts/setup-rollup.sh	404	# Check if we're on the correct kona-node tag	COMMENT
LOW	…eate-l2-rollup-example/scripts/download-op-deployer.sh	127	# Check if this release has op-deployer assets for our platform	COMMENT
LOW	…/contracts-bedrock/test/kontrol/scripts/run-kontrol.sh	70	# Check if kontrol_prove_report.xml exists in the container and copy it out if it does	COMMENT
LOW	…edrock/test/kontrol/scripts/make-summary-deployment.sh	31	# Set trap to call cleanup function on exit	COMMENT
LOW	…tracts-bedrock/test/kontrol/scripts/json/clean_json.py	51	# Check if a file path is provided as a command line argument	COMMENT
LOW⚡	…edrock/test/kontrol/scripts/json/reverse_key_values.py	37	# Check if both input and output file paths are provided	COMMENT
LOW	…/contracts-bedrock/scripts/checks/check-semver-diff.sh	169	# Check if the contract file exists.	COMMENT
LOW	…/contracts-bedrock/scripts/checks/check-semver-diff.sh	198	# Check if the versions were extracted successfully.	COMMENT
LOW	…/contracts-bedrock/scripts/checks/check-semver-diff.sh	209	# Check if the version changed.	COMMENT
LOW	…tracts-bedrock/scripts/checks/check-junit-tests-ran.sh	14	# Set ALLOW_EMPTY_TEST_RUN to a reason to deliberately accept a run with zero tests.	COMMENT
LOW	…ntracts-bedrock/scripts/checks/check-file-unchanged.sh	4	# Check if both arguments are provided	COMMENT
LOW	…ntracts-bedrock/scripts/checks/check-file-unchanged.sh	13	# Check if the file exists	COMMENT
LOW	ops/scripts/todo-checker.sh	85	# Check if it's just a number or a number with a leading #	COMMENT
LOW	ops/scripts/todo-checker.sh	117	# Check if issue was found	COMMENT
LOW	ops/scripts/latest-versions.sh	130	# Print results in JSON format	COMMENT
LOW	.circleci/continue/main.yml	434	# Check if this is just "main" (baseline with no features)	COMMENT
LOW	.circleci/continue/main.yml	443	# Check if this feature is in the system features registry	COMMENT

Self-Referential Comments9 hits · 27 pts

Severity	File	Line	Snippet	Context
MEDIUM	op-core/superchain/bundle/sync-superchain.sh	66	# Create a simple mapping of chain id -> config name to make looking up chains by their ID easier.	COMMENT
MEDIUM	…-docs/create-l2-rollup-example/scripts/setup-rollup.sh	85	# Create a 40-character hex address (20 bytes)	COMMENT
MEDIUM	…/contracts-bedrock/test/kontrol/scripts/run-kontrol.sh	96	# Define the function to run on failure	COMMENT
MEDIUM	…/contracts-bedrock/scripts/checks/check-semver-diff.sh	104	# Create a temporary directory.	COMMENT
MEDIUM	…bedrock/scripts/checks/test-validation/exclusions.toml	2	# This file contains lists of paths and test names that should be excluded	COMMENT
MEDIUM	ops/prestate-reproducibility/build-prestates.sh	40	# Create a detached worktree - we'll checkout specific tags in the build functions	COMMENT
MEDIUM	.circleci/routing.yml	3	# This file is the single source of truth for WHAT workflows run; the policy	COMMENT
MEDIUM	.circleci/continue/rust-e2e.yml	4	# This file contains E2E tests that depend on both kona and op-reth.	COMMENT
MEDIUM	.circleci/continue/rust-ci.yml	4	# This file contains all Rust CI commands, parameterized jobs, crate-specific jobs, and workflows.	COMMENT

Synthetic Comment Markers2 hits · 15 pts

Severity	File	Line	Snippet	Context
HIGH	cannon/cmd/run.go	431	// Enable debug/stats tracking as requested	COMMENT
HIGH	op-devstack/sysgo/subproc.go	108	// If the process is still running, request an interrupt as requested. We avoid	COMMENT

Modern AI Meta-Vocabulary4 hits · 10 pts

Severity	File	Line	Snippet	Context
MEDIUM	rust/kona/sp1/programs/super-range/src/main.rs	1	//! SP1 guest scaffold for unified super-root range and consolidation proofs.	COMMENT
MEDIUM	docs/public-docs/create-l2-rollup-example/README.md	119	├── docker-compose.yml # Service orchestration	CODE
MEDIUM	docs/ai/devfeatures.md	128	- #21662 tracks removing the SuperRootGamesMigration flag and its remaining scaffolding.	CODE
MEDIUM	op-faucet/cmd/testdata/empty.yaml	1	# intentionally empty, to test-run the service scaffolding without creating any faucet instances.	COMMENT

Excessive Try-Catch Wrapping5 hits · 9 pts

Severity	File	Line	Snippet	Context
MEDIUM⚡	…edrock/test/kontrol/scripts/json/reverse_key_values.py	30	print(f"Error: File not found: {input_file}")	CODE
MEDIUM⚡	…edrock/test/kontrol/scripts/json/reverse_key_values.py	33	print(f"Error: Invalid JSON format in file: {input_file}")	CODE
LOW	ops/check-changed/main.py	105	except Exception:	CODE
LOW	ops/check-changed/main.py	187	except Exception:	CODE
LOW	op-challenger/scripts/check-game-block-hashes.sh	50	except Exception: print("RETRY"); sys.exit()	CODE

Magic Placeholder Names1 hit · 8 pts

Severity	File	Line	Snippet	Context
HIGH	docs/public-docs/create-l2-rollup-example/README.md	94	# L1_RPC_URL="https://eth-sepolia.g.alchemy.com/v2/YOUR_API_KEY"	COMMENT

Deep Nesting6 hits · 6 pts

Severity	File	Line	Context
LOW	rust/scripts/test_upstream_mirrors.py	142	CODE
LOW	rust/scripts/upstream-mirrors.py	94	CODE
LOW	rust/scripts/upstream-mirrors.py	187	CODE
LOW	rust/scripts/upstream-mirrors.py	258	CODE
LOW	rust/scripts/upstream-mirrors.py	298	CODE
LOW	rust/scripts/upstream-mirrors.py	363	CODE

Example Usage Blocks3 hits · 4 pts

Severity	File	Line	Snippet	Context
LOW	ops/scripts/compute-git-versions.sh	8	# Usage:	COMMENT
LOW	op-challenger/scripts/check-game-block-hashes.sh	10	# Usage:	COMMENT
LOW	.circleci/scripts/test-decision-tree.sh	7	# Usage:	COMMENT

Unused Imports2 hits · 2 pts

Severity	File	Line	Snippet	Context
LOW	rust/scripts/test_upstream_mirrors.py	4		CODE
LOW	rust/scripts/upstream-mirrors.py	25		CODE

Fake / Example Data2 hits · 2 pts

Severity	File	Line	Snippet	Context
LOW	ops/scripts/test-git-version.sh	53	git -C "${repo}" config user.email "test@test.com"	CODE
LOW	ops/scripts/nut-provenance-verify/main_test.go	21	{"git", "config", "user.email", "test@test.com"},	CODE

ethereum-optimism/optimism

Open-Source Code Quality, Security and Technical Debt Review