Official repository of the AWS SDK for PHP (@awsforphp)
This report summarizes scanner evidence for aws/aws-sdk-php, a PHP project with 6,209 GitHub stars. SynthScan examined 3,432,649 lines of code across 8901 source files, recording 3060 pattern matches distributed across 8 syntactic categories. The legacy adjusted pattern signal is 1.0 (Low pattern signal); it is not an authorship estimate.
Use the findings to ask whether maintainers can explain intent, verify dependencies, simplify unnecessary scaffolding, and focus review effort. Risk Payload v1 adds ownership, supply-chain, over-engineering, and review-effort vectors when available. These are prompts for human verification, not probabilities, security findings, or measured maintenance costs.
Use each vector to guide manual verification of the underlying findings.
Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.
Can maintainers explain intent, assumptions, and trade-offs? 2973 finding(s).
Are imports declared and package/API names verified? 87 finding(s).
Are wrappers, guards, and repeated structures necessary? 2556 finding(s).
Which changes need focused human review? 3060 finding(s).
This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.
Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.
This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.
The scanner identified 3060 distinct pattern matches across 8 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.
Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | features/bootstrap/Aws/Test/PerformanceContext.php | 61 | public function iHaveLoadedMySdkAndItsDependencies() | CODE |
| LOW | features/bootstrap/Aws/Test/PerformanceContext.php | 69 | public function iTakeASnapshotOfMyResources() | CODE |
| LOW | features/bootstrap/Aws/Test/PerformanceContext.php | 111 | public function iCreateAClientForEachService() | CODE |
| LOW | features/bootstrap/Aws/Test/PerformanceContext.php | 125 | public function iCreateAndDiscardClientSForEachService($numClients) | CODE |
| LOW | features/bootstrap/Aws/Test/PerformanceContext.php | 141 | public function iExecuteCommandsOnEachClient($numCommands) | CODE |
| LOW | features/bootstrap/Aws/Test/PerformanceContext.php | 229 | public function iShouldNotHaveLeakedAnyResources() | CODE |
| LOW | features/bootstrap/Aws/Test/PerformanceContext.php | 257 | private function findOperationWithNoRequiredParameters($service) | CODE |
| LOW | …otstrap/Aws/Test/Integ/ClientSideMonitoringContext.php | 126 | public function iHaveLoadedATestManifestFileCalled($filename) | CODE |
| LOW | …otstrap/Aws/Test/Integ/ClientSideMonitoringContext.php | 145 | public function iHaveLoadedATestCaseFileCalled($filename) | CODE |
| LOW | …otstrap/Aws/Test/Integ/ClientSideMonitoringContext.php | 179 | public function iSuccessfullyRunTheTestCasesAgainstATestServer() | CODE |
| LOW | …otstrap/Aws/Test/Integ/ClientSideMonitoringContext.php | 397 | private function sendSocketShutdownMessage() | CODE |
| LOW | tests/HandlerListTest.php | 24 | public function testHandlerCanBeSetInCtor() | CODE |
| LOW | tests/HandlerListTest.php | 32 | public function testHandlerCanBeSetInSetter() | CODE |
| LOW | tests/HandlerListTest.php | 62 | public function testIgnoreWhenNameNotFound() | CODE |
| LOW | tests/HandlerListTest.php | 91 | public function testWrapsInStepOrderWithAppend() | CODE |
| LOW | tests/HandlerListTest.php | 109 | public function testWrapsInStepOrderWithPrepend() | CODE |
| LOW | tests/HandlerListTest.php | 171 | public function testMustExistByNameToPrependOrAppend() | CODE |
| LOW | tests/HandlerListTest.php | 178 | public function testCanInterposeMiddleware() | CODE |
| LOW | tests/PresignUrlMiddlewareTest.php | 19 | public function testDoesNotAddPresignedUrlForNonRequiredOperations() | CODE |
| LOW | tests/PresignUrlMiddlewareTest.php | 40 | public function testAddsPresignedUrlForRequiredOperations() | CODE |
| LOW | tests/PresignUrlMiddlewareTest.php | 87 | public function testNoPreSignedUrlWhenDifferentSourceRegionRequired() | CODE |
| LOW | tests/PresignUrlMiddlewareTest.php | 106 | public function testExtraQueryParametersAreURLEncoded( | CODE |
| LOW | tests/InputValidationMiddlewareTest.php | 22 | public static function getInvalidEndpointExceptions(): array | CODE |
| LOW | tests/InputValidationMiddlewareTest.php | 78 | public function testNoValidationWithoutInputList($input) | CODE |
| LOW⚡ | tests/RetryMiddlewareV2Test.php | 491 | public function testDeciderRetriesWhenStatusCodeMatches() | CODE |
| LOW⚡ | tests/RetryMiddlewareV2Test.php | 501 | public function testDeciderRetriesWhenConnectionError() | CODE |
| LOW⚡ | tests/RetryMiddlewareV2Test.php | 511 | public function testDeciderIgnoresNonAwsExceptions() | CODE |
| LOW⚡ | tests/RetryMiddlewareV2Test.php | 519 | public function testDeciderIgnoresPHPError() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 38 | public function testRetriesForStandardMode( | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 330 | public function testRetriesForAdapativeMode() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 550 | public function testDeciderRetriesWhenAwsErrorCodeMatches($err) | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 557 | public function testDeciderRetriesWhenExceptionStatusCodeMatches() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 573 | public function testDeciderRetriesForRetryableTrait() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 600 | public function testDeciderRetriesForCustomErrorCodes() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 625 | public function testDeciderRetriesForCustomStatusCodes() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 639 | public function testDeciderDoesNotRetryAfterMaxAttempts() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 689 | public function testDelaysExponentiallyWithJitter() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 698 | public function testDelaysWithSomeRandomness() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 713 | public function testRetriesWhenResultMatches() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 746 | public function testRetriesWhenExceptionMatches() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 780 | public function testForwardRejectionWhenExceptionDoesNotMatch() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 810 | public function testForwardValueWhenResultDoesNotMatch() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 832 | public function testRetriesCanBeDisabledOnACommand() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 843 | public function testResultReportsTheNumberOfRetries() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 865 | public function testExceptionReportsTheNumberOfRetries() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 887 | public function testResultReportsTotalRetryDelay() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 909 | public function testExceptionReportsTotalRetryDelay() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 932 | public function testReportsHttpStatsForEachRequest() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 966 | public function testReportsHttpStatsForEachException() | CODE |
| LOW | tests/RetryMiddlewareV2Test.php | 1055 | public function testReportsHttpStatsForEachRequestEvenIfRetryStatsDisabled() | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 118 | public function testAppendsUserAgentHeader() | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 143 | public function testUserAgentContainsValue(array $args, string $expected) | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 169 | public static function userAgentCasesDataProvider(): \Generator | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 260 | public function testUserAgentValueStartsWithSdkVersionString() | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 283 | public function testUserAgentCaptureWaiterMetric() | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 304 | public function testUserAgentCapturePaginatorMetric() | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 328 | public function testUserAgentCaptureRetryConfigMetric( | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 358 | public static function retryConfigMetricProvider(): array | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 629 | public function testUserAgentCaptureGzipRequestCompressionMetric() | CODE |
| LOW | tests/UserAgentMiddlewareTest.php | 661 | public function testUserAgentCaptureResolvedAccountIdMetric() | CODE |
| 2496 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | src/data/iotwireless/2020-11-22/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>AWS IoT Wireless provides bi-directional communication between internet-co | CODE |
| MEDIUM | src/data/forecast/2018-06-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Provides APIs for creating and managing Amazon Forecast resources.</p>', ' | CODE |
| MEDIUM⚡ | src/data/bedrock-runtime/2023-09-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Describes the API operations for running inference using Amazon Bedrock mo | CODE |
| MEDIUM⚡ | src/data/codebuild/2016-10-06/docs-2.json | 457 | "CreateFleetInput$computeType": "<p>Information about the compute resources the compute fleet uses. Available va | CODE |
| MEDIUM⚡ | src/data/codebuild/2016-10-06/docs-2.json | 459 | "Fleet$computeType": "<p>Information about the compute resources the compute fleet uses. Available values includ | CODE |
| MEDIUM⚡ | src/data/codebuild/2016-10-06/docs-2.json | 460 | "ProjectEnvironment$computeType": "<p>Information about the compute resources the build project uses. Available | CODE |
| MEDIUM⚡ | src/data/codebuild/2016-10-06/docs-2.json | 463 | "UpdateFleetInput$computeType": "<p>Information about the compute resources the compute fleet uses. Available va | CODE |
| MEDIUM | src/data/codebuild/2016-10-06/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>CodeBuild</fullname> <p>CodeBuild is a fully managed build service | CODE |
| MEDIUM | src/data/elasticfilesystem/2015-02-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon Elastic File System</fullname> <p>Amazon Elastic File System | CODE |
| MEDIUM | src/data/kinesis/2013-12-02/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon Kinesis Data Streams Service API Reference</fullname> <p>Ama | CODE |
| MEDIUM | src/data/kinesisvideo/2017-09-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p/>', 'operations' => [ 'CreateSignalingChannel' => '<p>Creates a signaling | CODE |
| MEDIUM | src/data/pinpoint/2016-12-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Doc Engage API - Amazon Pinpoint API</p>', 'operations' => [ 'CreateApp' = | CODE |
| MEDIUM | src/data/organizations/2016-11-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Organizations is a web service that enables you to consolidate your multip | CODE |
| MEDIUM | src/data/shield/2016-06-02/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Shield Advanced</fullname> <p>This is the <i>Shield Advanced API Re | CODE |
| MEDIUM | src/data/ssm/2014-11-06/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Web Services Systems Manager is the operations hub for your Amazon | CODE |
| MEDIUM⚡ | …data/partnercentral-selling/2022-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><fullname>Partner Central</fullname> <p>This Amazon Web Services (AWS) Par | CODE |
| MEDIUM | src/data/signer/2017-08-25/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>AWS Signer is a fully managed code-signing service to help you ensure the | CODE |
| MEDIUM⚡ | src/data/lakeformation/2017-03-31/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Lake Formation</fullname> <p>Defines the public endpoint for the La | CODE |
| MEDIUM | src/data/secretsmanager/2017-10-17/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon Web Services Secrets Manager</fullname> <p>Amazon Web Servic | CODE |
| MEDIUM⚡ | src/data/kms/2014-11-01/docs-2.json | 3 | "service": "<fullname>Key Management Service</fullname> <p>Key Management Service (KMS) is an encryption and key manag | CODE |
| MEDIUM⚡ | src/data/kms/2014-11-01/docs-2.json | 8 | "CreateCustomKeyStore": "<p>Creates a <a href=\"https://docs.aws.amazon.com/kms/latest/developerguide/key-store-over | CODE |
| MEDIUM⚡ | src/data/kms/2014-11-01/docs-2.json | 10 | "CreateKey": "<p>Creates a unique customer managed <a href=\"https://docs.aws.amazon.com/kms/latest/developerguide/c | CODE |
| MEDIUM | src/data/kms/2014-11-01/docs-2.json | 23 | "EnableKeyRotation": "<p>Enables <a href=\"https://docs.aws.amazon.com/kms/latest/developerguide/rotating-keys-enabl | CODE |
| MEDIUM | src/data/kms/2014-11-01/docs-2.json | 37 | "ImportKeyMaterial": "<p>Imports or reimports key material into an existing KMS key that was created without key mat | CODE |
| MEDIUM | src/data/kms/2014-11-01/docs-2.json | 58 | "UpdatePrimaryRegion": "<p>Changes the primary key of a multi-Region key. </p> <p>This operation changes the replica | CODE |
| MEDIUM | src/data/kms/2014-11-01/docs-2.json | 80 | "GetParametersForImportRequest$WrappingAlgorithm": "<p>The algorithm you will use with the RSA public key (<code | CODE |
| MEDIUM⚡ | src/data/kms/2014-11-01/docs-2.json | 1096 | "CreateKeyRequest$KeyUsage": "<p>Determines the <a href=\"https://docs.aws.amazon.com/kms/latest/developerguide/ | CODE |
| MEDIUM⚡ | src/data/kms/2014-11-01/docs-2.json | 1098 | "KeyMetadata$KeyUsage": "<p>The <a href=\"https://docs.aws.amazon.com/kms/latest/developerguide/kms-cryptography | CODE |
| MEDIUM | src/data/kms/2014-11-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Key Management Service</fullname> <p>Key Management Service (KMS) i | CODE |
| MEDIUM | src/data/eventbridge/2015-10-07/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon EventBridge helps you to respond to state changes in your Amazon We | CODE |
| LOW | src/data/frauddetector/2019-11-15/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the Amazon Fraud Detector API Reference. This guide is for develop | CODE |
| MEDIUM⚡ | src/data/glue/2017-03-31/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Glue</fullname> <p>Defines the public endpoint for the Glue service | CODE |
| MEDIUM⚡ | src/data/sesv2/2019-09-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon SES API v2</fullname> <p> <a href="http://aws.amazon.com/ses | CODE |
| MEDIUM | src/data/resource-explorer-2/2022-07-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Web Services Resource Explorer is a resource search and discovery s | CODE |
| MEDIUM | src/data/omics/2022-11-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Web Services HealthOmics is a service that helps users such as bioi | CODE |
| MEDIUM⚡ | src/data/mediaconvert/2017-08-29/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => 'AWS Elemental MediaConvert', 'operations' => [ 'AssociateCertificate' => 'Ass | CODE |
| LOW⚡ | src/data/mediaconvert/2017-08-29/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => 'AWS Elemental MediaConvert', 'operations' => [ 'AssociateCertificate' => 'Ass | CODE |
| MEDIUM | src/data/sns/2010-03-31/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon Simple Notification Service</fullname> <p>Amazon Simple Noti | CODE |
| LOW | src/data/datasync/2018-11-09/docs-2.json | 7 | "CreateLocationAzureBlob": "<p>Creates a transfer <i>location</i> for a Microsoft Azure Blob Storage container. Data | CODE |
| MEDIUM | src/data/datasync/2018-11-09/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>DataSync</fullname> <p>In addition to the Amazon Web Services Manag | CODE |
| LOW | src/data/datasync/2018-11-09/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>DataSync</fullname> <p>In addition to the Amazon Web Services Manag | CODE |
| MEDIUM | src/data/cognito-idp/2016-04-18/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>With the Amazon Cognito user pools API, you can configure user pools and a | CODE |
| MEDIUM | src/data/greengrassv2/2020-11-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>IoT Greengrass brings local compute, messaging, data management, sync, and | CODE |
| MEDIUM | src/data/neptunedata/2023-08-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><fullname>Neptune Data API</fullname> <p>The Amazon Neptune data API provi | CODE |
| MEDIUM⚡ | src/data/acm-pca/2017-08-22/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Web Services Private Certificate Authority API Refer | CODE |
| MEDIUM | src/data/b2bi/2022-06-23/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Web Services B2B Data Interchange API Reference</i>. | CODE |
| MEDIUM | src/data/groundstation/2019-05-23/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Welcome to the AWS Ground Station API Reference. AWS Ground Station is a f | CODE |
| MEDIUM | src/data/config/2014-11-12/docs-2.json | 3 | "service": "<fullname>Config</fullname> <p>Config provides a way to keep track of the configurations of all the Amazon | CODE |
| LOW | src/data/config/2014-11-12/docs-2.json | 2024 | "RecordingGroup$includeGlobalResourceTypes": "<p>This option is a bundle which only applies to the global IAM re | CODE |
| MEDIUM | src/data/config/2014-11-12/docs-2.json | 2907 | "base": "<p>Specifies which resource types Config records for configuration changes. By default, Config records co | CODE |
| MEDIUM | src/data/config/2014-11-12/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Config</fullname> <p>Config provides a way to keep track of the con | CODE |
| LOW | src/data/config/2014-11-12/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Config</fullname> <p>Config provides a way to keep track of the con | CODE |
| MEDIUM | src/data/memorydb/2021-01-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>MemoryDB is a fully managed, Redis OSS-compatible, in-memory database that | CODE |
| MEDIUM | src/data/neptune-graph/2023-11-29/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Neptune Analytics is a new analytics database engine for Amazon Neptune th | CODE |
| MEDIUM | src/data/fms/2018-01-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Firewall Manager API Reference</i>. This guide is for devel | CODE |
| MEDIUM | src/data/s3control/2018-08-20/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p> Amazon Web Services S3 Control provides access to Amazon S3 control plane | CODE |
| MEDIUM | src/data/customer-profiles/2020-08-15/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Connect Customer Customer Profiles</fullname> <ul> <li> <p> <a href | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| MEDIUM | src/data/synthetics/2017-10-11/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon CloudWatch Synthetics</fullname> <p>You can use Amazon Cloud | CODE |
| MEDIUM | src/data/runtime.lex/2016-11-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Lex provides both build and runtime endpoints. Each endpoint provid | CODE |
| 141 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | src/data/codebuild/2016-10-06/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>CodeBuild</fullname> <p>CodeBuild is a fully managed build service | CODE |
| MEDIUM | src/data/kinesisvideo/2017-09-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p/>', 'operations' => [ 'CreateSignalingChannel' => '<p>Creates a signaling | CODE |
| MEDIUM⚡ | …data/partnercentral-selling/2022-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><fullname>Partner Central</fullname> <p>This Amazon Web Services (AWS) Par | CODE |
| MEDIUM⚡ | …data/partnercentral-selling/2022-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><fullname>Partner Central</fullname> <p>This Amazon Web Services (AWS) Par | CODE |
| MEDIUM⚡ | …data/partnercentral-selling/2022-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><fullname>Partner Central</fullname> <p>This Amazon Web Services (AWS) Par | CODE |
| MEDIUM | src/data/geo-places/2020-11-19/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p> The Places API enables powerful location search and geocoding capabilitie | CODE |
| MEDIUM⚡ | src/data/lakeformation/2017-03-31/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Lake Formation</fullname> <p>Defines the public endpoint for the La | CODE |
| MEDIUM⚡ | src/data/lakeformation/2017-03-31/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Lake Formation</fullname> <p>Defines the public endpoint for the La | CODE |
| MEDIUM⚡ | src/data/kms/2014-11-01/docs-2.json | 1096 | "CreateKeyRequest$KeyUsage": "<p>Determines the <a href=\"https://docs.aws.amazon.com/kms/latest/developerguide/ | CODE |
| MEDIUM | src/data/kms/2014-11-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Key Management Service</fullname> <p>Key Management Service (KMS) i | CODE |
| MEDIUM | src/data/lookoutequipment/2020-12-15/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Lookout for Equipment is a machine learning service that uses advan | CODE |
| MEDIUM⚡ | src/data/glue/2017-03-31/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Glue</fullname> <p>Defines the public endpoint for the Glue service | CODE |
| MEDIUM⚡ | src/data/glue/2017-03-31/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Glue</fullname> <p>Defines the public endpoint for the Glue service | CODE |
| MEDIUM⚡ | src/data/glue/2017-03-31/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Glue</fullname> <p>Defines the public endpoint for the Glue service | CODE |
| MEDIUM⚡ | src/data/sesv2/2019-09-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon SES API v2</fullname> <p> <a href="http://aws.amazon.com/ses | CODE |
| MEDIUM | …ta/bedrock-agentcore-control/2023-06-05/api-2.json.php | 3 | return [ 'version' => '2.0', 'metadata' => [ 'apiVersion' => '2023-06-05', 'auth' => [ 'aws.auth#sigv4', ], 'endpointPre | CODE |
| MEDIUM⚡ | src/data/bedrock-agentcore/2024-02-28/api-2.json.php | 3 | return [ 'version' => '2.0', 'metadata' => [ 'apiVersion' => '2024-02-28', 'auth' => [ 'aws.auth#sigv4', ], 'endpointPre | CODE |
| MEDIUM⚡ | src/data/bedrock-agentcore/2024-02-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Welcome to the Amazon Bedrock AgentCore Data Plane API reference. Data Pla | CODE |
| MEDIUM⚡ | src/data/bedrock-agentcore/2024-02-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Welcome to the Amazon Bedrock AgentCore Data Plane API reference. Data Pla | CODE |
| MEDIUM⚡ | src/data/wickr/2024-02-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Welcome to the <i>Amazon Web Services Wickr API Reference</i>.</p> <p>The | CODE |
| MEDIUM⚡ | src/data/wickr/2024-02-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Welcome to the <i>Amazon Web Services Wickr API Reference</i>.</p> <p>The | CODE |
| MEDIUM⚡ | src/data/wickr/2024-02-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Welcome to the <i>Amazon Web Services Wickr API Reference</i>.</p> <p>The | CODE |
| MEDIUM | src/data/medialive/2017-10-14/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => 'API for AWS Elemental MediaLive', 'operations' => [ 'AcceptInputDeviceTransfe | CODE |
| MEDIUM⚡ | src/data/mediaconvert/2017-08-29/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => 'AWS Elemental MediaConvert', 'operations' => [ 'AssociateCertificate' => 'Ass | CODE |
| MEDIUM | src/data/cognito-idp/2016-04-18/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>With the Amazon Cognito user pools API, you can configure user pools and a | CODE |
| MEDIUM⚡ | src/data/acm-pca/2017-08-22/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Web Services Private Certificate Authority API Refer | CODE |
| MEDIUM | src/data/customer-profiles/2020-08-15/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Connect Customer Customer Profiles</fullname> <ul> <li> <p> <a href | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| MEDIUM | …a/marketplace-discovery/2026-02-05/examples-1.json.php | 3 | return [ 'version' => '1.0', 'examples' => [ 'GetListing' => [ [ 'input' => [ 'listingId' => 'prodview-sampleSaasId', 'l | CODE |
| MEDIUM | src/data/location/2020-11-19/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>"Suite of geospatial services including Maps, Places, Routes, Tracking, an | CODE |
| MEDIUM | src/data/wafv2/2019-07-29/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>WAF </fullname> <note> <p>This is the latest version of the <b>WAF< | CODE |
| MEDIUM | src/data/iotfleetwise/2021-06-17/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Web Services IoT FleetWise is a fully managed service that you can | CODE |
| MEDIUM | src/data/accessanalyzer/2019-11-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Identity and Access Management Access Analyzer helps you to set, verify, a | CODE |
| MEDIUM⚡ | src/data/lightsail/2016-11-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Lightsail is the easiest way to get started with Amazon Web Service | CODE |
| MEDIUM⚡ | src/data/lightsail/2016-11-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Lightsail is the easiest way to get started with Amazon Web Service | CODE |
| MEDIUM⚡ | src/data/lightsail/2016-11-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Lightsail is the easiest way to get started with Amazon Web Service | CODE |
| MEDIUM⚡ | …/data/bedrock-agent-runtime/2023-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><note> <p>Amazon Bedrock Agents (now Amazon Bedrock Agents Classic) is no | CODE |
| MEDIUM | src/data/cloudsearchdomain/2013-01-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>You use the AmazonCloudSearch2013 API to upload documents to a search doma | CODE |
| MEDIUM | src/data/neptune/2014-10-31/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon Neptune</fullname> <p>Amazon Neptune is a fast, reliable, fu | CODE |
| MEDIUM | src/data/transfer/2018-11-05/docs-2.json | 1611 | "ProtocolDetails$PassiveIp": "<p> Indicates passive mode, for FTP and FTPS protocols. Enter a single IPv4 addres | CODE |
| MEDIUM | src/data/transfer/2018-11-05/docs-2.json | 1611 | "ProtocolDetails$PassiveIp": "<p> Indicates passive mode, for FTP and FTPS protocols. Enter a single IPv4 addres | CODE |
| MEDIUM⚡ | src/data/transfer/2018-11-05/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Transfer Family offers fully managed support for the transfer of files ove | CODE |
| MEDIUM⚡ | src/data/transfer/2018-11-05/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Transfer Family offers fully managed support for the transfer of files ove | CODE |
| MEDIUM⚡ | src/data/dynamodb/2012-08-10/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon DynamoDB</fullname> <p>Amazon DynamoDB is a fully managed No | CODE |
| MEDIUM | src/data/storagegateway/2013-06-30/docs-2.json | 3 | "service": "<fullname>Storage Gateway Service</fullname> <important> <p>Amazon FSx File Gateway is no longer available | CODE |
| MEDIUM⚡ | src/data/storagegateway/2013-06-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Storage Gateway Service</fullname> <important> <p>Amazon FSx File G | CODE |
| MEDIUM⚡ | src/data/storagegateway/2013-06-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Storage Gateway Service</fullname> <important> <p>Amazon FSx File G | CODE |
| MEDIUM⚡ | src/data/ecs/2014-11-13/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><fullname>Amazon Elastic Container Service</fullname> <p>Amazon Elastic Co | CODE |
| MEDIUM⚡ | src/data/qconnect/2020-10-19/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<ul> <li> <p> <a href="https://docs.aws.amazon.com/connect/latest/APIReferenc | CODE |
| MEDIUM⚡ | src/data/qconnect/2020-10-19/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<ul> <li> <p> <a href="https://docs.aws.amazon.com/connect/latest/APIReferenc | CODE |
| MEDIUM | src/data/workspaces/2015-04-08/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon WorkSpaces Service</fullname> <p>Amazon WorkSpaces enables y | CODE |
| MEDIUM | src/data/codepipeline/2015-07-09/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname> CodePipeline </fullname> <p> <b>Overview</b> </p> <p>This is the C | CODE |
| MEDIUM⚡ | src/data/sqs/2012-11-05/docs-2.json | 631 | "ReceiveMessageRequest$ReceiveRequestAttemptId": "<p>This parameter applies only to FIFO (first-in-first-out) qu | CODE |
| MEDIUM⚡ | src/data/sqs/2012-11-05/docs-2.json | 637 | "SendMessageBatchRequestEntry$MessageDeduplicationId": "<p>This parameter applies only to FIFO (first-in-first-o | CODE |
| MEDIUM⚡ | src/data/sqs/2012-11-05/docs-2.json | 638 | "SendMessageBatchRequestEntry$MessageGroupId": "<p> <code>MessageGroupId</code> is an attribute used in Amazon S | CODE |
| MEDIUM⚡ | src/data/sqs/2012-11-05/docs-2.json | 647 | "SendMessageRequest$MessageDeduplicationId": "<p>This parameter applies only to FIFO (first-in-first-out) queues | CODE |
| MEDIUM⚡ | src/data/sqs/2012-11-05/docs-2.json | 648 | "SendMessageRequest$MessageGroupId": "<p> <code>MessageGroupId</code> is an attribute used in Amazon SQS FIFO (F | CODE |
| MEDIUM | src/data/sqs/2012-11-05/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Welcome to the <i>Amazon SQS API Reference</i>.</p> <p>Amazon SQS is a rel | CODE |
| MEDIUM | src/data/iot/2015-05-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>IoT</fullname> <p>IoT provides secure, bi-directional communication | CODE |
| 53 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM⚡ | src/data/bedrock-runtime/2023-09-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Describes the API operations for running inference using Amazon Bedrock mo | CODE |
| MEDIUM⚡ | src/data/bedrock-runtime/2023-09-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Describes the API operations for running inference using Amazon Bedrock mo | CODE |
| MEDIUM | src/data/ssm/2014-11-06/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Web Services Systems Manager is the operations hub for your Amazon | CODE |
| MEDIUM | src/data/frauddetector/2019-11-15/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the Amazon Fraud Detector API Reference. This guide is for develop | CODE |
| MEDIUM | …a/bedrock-agentcore-control/2023-06-05/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Welcome to the Amazon Bedrock AgentCore Control plane API reference. Contr | CODE |
| MEDIUM⚡ | src/data/bedrock-agentcore/2024-02-28/api-2.json.php | 3 | return [ 'version' => '2.0', 'metadata' => [ 'apiVersion' => '2024-02-28', 'auth' => [ 'aws.auth#sigv4', ], 'endpointPre | CODE |
| MEDIUM⚡ | src/data/bedrock-agentcore/2024-02-28/api-2.json.php | 3 | return [ 'version' => '2.0', 'metadata' => [ 'apiVersion' => '2024-02-28', 'auth' => [ 'aws.auth#sigv4', ], 'endpointPre | CODE |
| MEDIUM⚡ | src/data/bedrock-agentcore/2024-02-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Welcome to the Amazon Bedrock AgentCore Data Plane API reference. Data Pla | CODE |
| MEDIUM | src/data/chatbot/2017-10-11/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>The <i>AWS Chatbot API Reference</i> provides descriptions, API request pa | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json | 400 | "base": "<p>The creator mode specific admin controls configured for an Amazon Q Business application. Determines w | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json | 406 | "base": "<p>The chat orchestration specific admin controls configured for an Amazon Q Business application. Determ | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json | 406 | "base": "<p>The chat orchestration specific admin controls configured for an Amazon Q Business application. Determ | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json | 406 | "base": "<p>The chat orchestration specific admin controls configured for an Amazon Q Business application. Determ | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json | 746 | "ChatSyncInput$chatMode": "<p>The <code>chatMode</code> parameter determines the chat modes available to Amazon | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json | 747 | "ConfigurationEvent$chatMode": "<p>The chat modes available to an Amazon Q Business end user.</p> <ul> <li> <p> | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json | 751 | "base": "<p>Configuration information for Amazon Q Business conversation modes.</p> <p>For more information, see < | CODE |
| MEDIUM | src/data/qbusiness/2023-11-27/docs-2.json | 1046 | "base": "<p>Configuration information required to invoke chat in <code>CREATOR_MODE</code>.</p> <p>For more inform | CODE |
| MEDIUM | src/data/qbusiness/2023-11-27/docs-2.json | 2837 | "base": "<p>Configuration information required to invoke chat in <code>PLUGIN_MODE</code>.</p> <p>For more informa | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| MEDIUM⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| MEDIUM | src/data/opensearch/2021-01-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Use the Amazon OpenSearch Service configuration API to create, configure, | CODE |
| MEDIUM | src/data/bedrock-agent-runtime/2023-07-26/docs-2.json | 2058 | "InvokeInlineAgentRequest$guardrailConfiguration": "<p> The <a href=\"https://docs.aws.amazon.com/bedrock/latest | CODE |
| MEDIUM | src/data/bedrock-agent-runtime/2023-07-26/docs-2.json | 2964 | "InvokeInlineAgentRequest$foundationModel": "<p> The <a href=\"https://docs.aws.amazon.com/bedrock/latest/usergu | CODE |
| MEDIUM⚡ | …/data/bedrock-agent-runtime/2023-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><note> <p>Amazon Bedrock Agents (now Amazon Bedrock Agents Classic) is no | CODE |
| MEDIUM⚡ | …/data/bedrock-agent-runtime/2023-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><note> <p>Amazon Bedrock Agents (now Amazon Bedrock Agents Classic) is no | CODE |
| MEDIUM⚡ | …/data/bedrock-agent-runtime/2023-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><note> <p>Amazon Bedrock Agents (now Amazon Bedrock Agents Classic) is no | CODE |
| MEDIUM⚡ | src/data/ecs/2014-11-13/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><fullname>Amazon Elastic Container Service</fullname> <p>Amazon Elastic Co | CODE |
| MEDIUM⚡ | src/data/qconnect/2020-10-19/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<ul> <li> <p> <a href="https://docs.aws.amazon.com/connect/latest/APIReferenc | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/api-2.json.php | 3 | return [ 'version' => '2.0', 'metadata' => [ 'apiVersion' => '2023-04-20', 'auth' => [ 'aws.auth#sigv4', 'smithy.api#htt | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 16 | "CreateGuardrail": "<p>Creates a guardrail to block topics and to implement safeguards for your generative AI applic | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 110 | "UpdateGuardrail": "<p>Updates a guardrail with the values you specify.</p> <ul> <li> <p>Specify a <code>name</code> | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 3111 | "base": "<p>Contains filter strengths for harmful content. Guardrails support the following content filters to det | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 3126 | "base": "<p>Contains filter strengths for harmful content. Guardrails support the following content filters to det | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 3165 | "GuardrailContentFiltersTier$tierName": "<p>The tier that your guardrail uses for content filters. Valid values | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 3166 | "GuardrailContentFiltersTierConfig$tierName": "<p>The tier that your guardrail uses for content filters. Valid v | CODE |
| MEDIUM⚡ | src/data/bedrock/2023-04-20/docs-2.json | 3260 | "GuardrailContextualGroundingTier$tierName": "<p>The tier that your guardrail uses for contextual grounding. Val | CODE |
| MEDIUM⚡ | src/data/bedrock/2023-04-20/docs-2.json | 3261 | "GuardrailContextualGroundingTierConfig$tierName": "<p>The tier that your guardrail uses for contextual groundin | CODE |
| MEDIUM⚡ | src/data/bedrock/2023-04-20/docs-2.json | 3265 | "base": "<p>The system-defined guardrail profile that you're using with your guardrail. Guardrail profiles define | CODE |
| MEDIUM⚡ | src/data/bedrock/2023-04-20/docs-2.json | 3267 | "CreateGuardrailRequest$crossRegionConfig": "<p>The system-defined guardrail profile that you're using with your | CODE |
| MEDIUM⚡ | src/data/bedrock/2023-04-20/docs-2.json | 3268 | "UpdateGuardrailRequest$crossRegionConfig": "<p>The system-defined guardrail profile that you're using with your | CODE |
| MEDIUM⚡ | src/data/bedrock/2023-04-20/docs-2.json | 3272 | "base": "<p>Contains details about the system-defined guardrail profile that you're using with your guardrail for | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 3287 | "GuardrailCrossRegionDetails$guardrailProfileId": "<p>The ID of the guardrail profile that your guardrail is usi | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 3293 | "GuardrailCrossRegionConfig$guardrailProfileIdentifier": "<p>The ID or Amazon Resource Name (ARN) of the guardra | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 3448 | "GuardrailPiiEntityConfig$type": "<p>Configure guardrail type when the PII entity is detected.</p> <p>The follow | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 3667 | "GuardrailTopicsTier$tierName": "<p>The tier that your guardrail uses for denied topic filters. Valid values inc | CODE |
| MEDIUM | src/data/bedrock/2023-04-20/docs-2.json | 3668 | "GuardrailTopicsTierConfig$tierName": "<p>The tier that your guardrail uses for denied topic filters. Valid valu | CODE |
| MEDIUM⚡ | src/data/bedrock/2023-04-20/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Describes the API operations for creating, managing, fine-turning, and eva | CODE |
| MEDIUM⚡ | src/data/bedrock/2023-04-20/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Describes the API operations for creating, managing, fine-turning, and eva | CODE |
| MEDIUM | src/data/eks/2017-11-01/docs-2.json | 1980 | "NodegroupUpdateConfig$updateStrategy": "<p>The configuration for the behavior to follow during a node group ver | CODE |
| MEDIUM⚡ | src/data/eks/2017-11-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Elastic Kubernetes Service (Amazon EKS) is a managed service that m | CODE |
| MEDIUM⚡ | src/data/eks/2017-11-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Elastic Kubernetes Service (Amazon EKS) is a managed service that m | CODE |
| MEDIUM⚡ | src/data/eks/2017-11-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Elastic Kubernetes Service (Amazon EKS) is a managed service that m | CODE |
| MEDIUM | src/data/batch/2016-08-10/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Batch</fullname> <p>Using Batch, you can run batch computing worklo | CODE |
| MEDIUM⚡ | src/data/bedrock-agent/2023-06-05/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><note> <p>Amazon Bedrock Agents (now Amazon Bedrock Agents Classic) is no | CODE |
| MEDIUM⚡ | src/data/bedrock-agent/2023-06-05/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><note> <p>Amazon Bedrock Agents (now Amazon Bedrock Agents Classic) is no | CODE |
| MEDIUM⚡ | src/data/bedrock-agent/2023-06-05/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><note> <p>Amazon Bedrock Agents (now Amazon Bedrock Agents Classic) is no | CODE |
| MEDIUM | src/data/states/2016-11-23/docs-2.json | 28 | "RedriveExecution": "<p>Restarts unsuccessful executions of Standard workflows that didn't complete successfully in | CODE |
| 9 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | tests/CloudFront/SignerTest.php | 46 | $filename = tempnam(sys_get_temp_dir(), 'cloudfront-fake-key'); | CODE |
| LOW | tests/Api/Serializer/RestJsonSerializerTest.php | 873 | 'pathParams' => ['id' => 'user@example.com'], | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 66 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 73 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 78 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 89 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 96 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 101 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 112 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 119 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 124 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 177 | 'Message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 184 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 189 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 199 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 347 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 354 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 359 | 'message' => 'lorem ipsum', | CODE |
| LOW | tests/Api/ErrorParser/RpcV2CborErrorParserTest.php | 210 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 72 | '{ "__Type": "foo", "Message": "lorem ipsum" }', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 77 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 81 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 152 | '{ "__Type": "foo", "Message": "lorem ipsum" }', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 157 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 161 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 172 | '{ "__Type": "foo", "Message": "lorem ipsum" }', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 177 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 181 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 192 | '{ "__Type": "foo", "Message": "lorem ipsum" }', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 197 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/JsonRpcErrorParserTest.php | 201 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 65 | '{ "type": "client", "message": "lorem ipsum", "code": "foo" }', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 70 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 75 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 85 | '{"message": "lorem ipsum"}', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 90 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 94 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 175 | '{"message": "lorem ipsum"}', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 180 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 184 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 192 | '{ "type": "client", "message": "lorem ipsum", "code": "NonExistentException" }', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 197 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 202 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 211 | '{ "type": "client", "Message": "lorem ipsum", "code": "NonExistentException" }', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 216 | 'message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 217 | 'Message' => 'lorem ipsum', | CODE |
| LOW⚡ | tests/Api/ErrorParser/RestJsonErrorParserTest.php | 222 | 'Message' => 'lorem ipsum', | CODE |
| LOW | src/data/ssm/2014-11-06/smoke.json.php | 3 | return [ 'version' => 1, 'defaultRegion' => 'us-west-2', 'testCases' => [ [ 'operationName' => 'ListDocuments', 'input' | CODE |
| LOW | src/data/ssm/2014-11-06/smoke.json | 13 | "Name": "'fake-name'" | CODE |
| LOW | src/data/cloudwatchomni/2025-01-01/examples-1.json | 1697 | "displayName": "Jane Doe", | CODE |
| LOW | src/data/cloudwatchomni/2025-01-01/examples-1.json.php | 3 | return [ 'version' => '1.0', 'examples' => [ 'CreateAccessGrant' => [ [ 'input' => [ 'name' => 'analyst-read-access', 'c | CODE |
| LOW | src/data/qapps/2023-11-27/api-2.json.php | 3 | return [ 'version' => '2.0', 'metadata' => [ 'apiVersion' => '2023-11-27', 'auth' => [ 'aws.auth#sigv4', ], 'endpointPre | CODE |
| LOW | src/data/qapps/2023-11-27/api-2.json | 2380 | "placeholder":{"shape":"Placeholder"}, | CODE |
| LOW | src/data/qapps/2023-11-27/api-2.json | 2395 | "placeholder":{"shape":"Placeholder"}, | CODE |
| LOW | src/data/wafv2/2019-07-29/smoke.json.php | 3 | return [ 'version' => 1, 'defaultRegion' => 'us-east-1', 'testCases' => [ [ 'operationName' => 'ListWebACLs', 'input' => | CODE |
| LOW | src/data/wafv2/2019-07-29/smoke.json | 16 | "Name": "fake_name", | CODE |
| LOW | src/data/amplifyuibuilder/2021-08-11/api-2.json.php | 3 | return [ 'version' => '2.0', 'metadata' => [ 'apiVersion' => '2021-08-11', 'endpointPrefix' => 'amplifyuibuilder', 'json | CODE |
| LOW | src/data/amplifyuibuilder/2021-08-11/api-2.json | 1324 | "placeholder":{"shape":"String"}, | CODE |
| LOW | src/data/iam/2010-05-08/smoke.json.php | 3 | return [ 'version' => 1, 'defaultRegion' => 'us-east-1', 'testCases' => [ [ 'operationName' => 'ListUsers', 'input' => [ | CODE |
| LOW | src/data/iam/2010-05-08/smoke.json | 13 | "UserName": "fake_user" | CODE |
| 27 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | CONTRIBUTING.md | 127 | Items reviewed in this way must include a statement like "generated by AI | CODE |
| HIGH⚡ | …data/partnercentral-selling/2022-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><fullname>Partner Central</fullname> <p>This Amazon Web Services (AWS) Par | CODE |
| HIGH⚡ | …data/partnercentral-selling/2022-07-26/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><fullname>Partner Central</fullname> <p>This Amazon Web Services (AWS) Par | CODE |
| HIGH⚡ | src/data/sesv2/2019-09-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon SES API v2</fullname> <p> <a href="http://aws.amazon.com/ses | CODE |
| HIGH⚡ | src/data/sesv2/2019-09-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Amazon SES API v2</fullname> <p> <a href="http://aws.amazon.com/ses | CODE |
| HIGH | src/data/acm-pca/2017-08-22/docs-2.json | 722 | "base": "<p>Certificate revocation information used by the <a href=\"https://docs.aws.amazon.com/privateca/latest/ | CODE |
| HIGH⚡ | src/data/acm-pca/2017-08-22/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Web Services Private Certificate Authority API Refer | CODE |
| HIGH⚡ | src/data/acm-pca/2017-08-22/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Web Services Private Certificate Authority API Refer | CODE |
| HIGH⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| HIGH⚡ | src/data/qbusiness/2023-11-27/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>This is the <i>Amazon Q Business</i> API Reference. Amazon Q Business is a | CODE |
| HIGH | src/data/resiliencehub/2020-04-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Resilience Hub helps you proactively prepare and protect your Amazon Web S | CODE |
| HIGH | src/data/resiliencehub/2020-04-30/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Resilience Hub helps you proactively prepare and protect your Amazon Web S | CODE |
| HIGH⚡ | …data/elasticloadbalancingv2/2015-12-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Elastic Load Balancing</fullname> <p>A load balancer distributes in | CODE |
| HIGH⚡ | …data/elasticloadbalancingv2/2015-12-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>Elastic Load Balancing</fullname> <p>A load balancer distributes in | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | src/data/omics/2022-11-28/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Amazon Web Services HealthOmics is a service that helps users such as bioi | CODE |
| HIGH⚡ | src/data/mediaconvert/2017-08-29/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => 'AWS Elemental MediaConvert', 'operations' => [ 'AssociateCertificate' => 'Ass | CODE |
| HIGH⚡ | src/data/transfer/2018-11-05/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p>Transfer Family offers fully managed support for the transfer of files ove | CODE |
| HIGH | src/data/cloudtrail/2013-11-01/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<fullname>CloudTrail</fullname> <p>This is the CloudTrail API Reference. It p | CODE |
| HIGH | src/data/identitystore/2020-06-15/docs-2.json.php | 3 | return [ 'version' => '2.0', 'service' => '<p><note> <p> IAM Identity Center uses the <code>sso</code>, <code>sso-direct | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | tests/Token/BedrockTokenProviderTest.php | 441 | 'service' => 'bedrock', | COMMENT |
| LOW | tests/Token/BedrockTokenProviderTest.php | 461 | // 'operation' => 'listTagsForResource', | COMMENT |
| LOW | tests/Crypto/EncryptionDecryptionTraitV3Test.php | 201 | $algorithmSuite, | COMMENT |
| LOW | tests/S3/Crypto/InstructionFileMetadataStrategyTest.php | 81 | $this->assertArrayHasKey(MetadataEnvelope::KEY_COMMITMENT_V3, $updatedArgs['Metadata']); | COMMENT |
| LOW | tests/Api/Serializer/ComplianceTest.php | 21 | use Aws\Api\Serializer\Ec2ParamBuilder; | COMMENT |
| LOW | src/AwsClient.php | 721 | COMMENT | |
| LOW | src/Crypto/MetadataEnvelope.php | 21 | //# and MUST be prepended to all S3EC metadata mapkeys. | COMMENT |
| LOW | src/Crypto/MetadataEnvelope.php | 41 | //= type=implication | COMMENT |
| LOW | src/Crypto/MetadataEnvelope.php | 61 | //= ../specification/s3-encryption/data-format/content-metadata.md#content-metadata-mapkeys | COMMENT |
| LOW | src/Crypto/MetadataEnvelope.php | 161 | //= ../specification/s3-encryption/data-format/content-metadata.md#content-metadata-mapkeys | COMMENT |
| LOW | src/Crypto/EncryptionTraitV3.php | 381 | //= type=implication | COMMENT |
| LOW | src/Crypto/EncryptionTraitV3.php | 401 | //= type=implication | COMMENT |
| LOW | src/S3/Crypto/InstructionFileMetadataStrategy.php | 61 | //# In the V3 format, the mapkeys "x-amz-c", "x-amz-d", and "x-amz-i" MUST be stored exclusively in the Object M | COMMENT |
| LOW | src/S3/Crypto/S3EncryptionClientV3.php | 101 | * @param string|null $instructionFileSuffix Suffix for a client wide | COMMENT |
| LOW | src/S3/Crypto/S3EncryptionClientV3.php | 121 | //= type=implication | COMMENT |