5.8

Adjusted Signal

5.8

Raw Pattern Score

100%

Time Factor

2026-10-31

Last Push

3.2K

Stars

Verilog

Language

978.3K

Lines of Code

3.1K

Files

4.1K

Pattern Hits

2026-10-31

Scan Date

0.09

HC Hit Rate

Risk Review · Payload v1

Use each vector to guide manual verification of the underlying findings.

Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.

Cognitive Ownership Risk 15.0/100 · LOW

Can maintainers explain intent, assumptions, and trade-offs? 3119 finding(s).

Hallucinated Dependency & Supply Chain Risk 2.4/100 · LOW

Are imports declared and package/API names verified? 485 finding(s).

Agent Over-Engineering Ratio 10.9/100 · LOW

Are wrappers, guards, and repeated structures necessary? 717 finding(s).

PR Review Velocity Impact 26.9/100 · MEDIUM

Which changes need focused human review? 4120 finding(s).

What These Metrics Mean

Adjusted Signal: Legacy pattern score normalized per 1,000 scanned lines and multiplied by the repository-level time factor. It is not an estimate of AI authorship.
Raw Pattern Score: Sum of severity- and context-weighted pattern findings before applying the time factor.
Time Factor: A coarse multiplier based on repository last-push metadata. It does not identify when individual code was written.
Pattern Hits: Count of configured pattern findings. Review each location and surrounding code before acting.
HC Hit Rate: High- and critical-severity findings per scanned file. Severity is a configured detector weight, not proof of a vulnerability or authorship.
Lines / Files: Scan coverage denominators used by the legacy normalized score.

Pattern-Signal History

This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.

Severity Breakdown

Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.

CRITICAL 0HIGH 289MEDIUM 288LOW 3543

Directory Score Breakdown

This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.

Pattern Findings

The scanner identified 4120 distinct pattern matches across 21 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.

Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.

Over-Commented Block2557 hits · 2350 pts

Severity	File	Line	Snippet	Context
LOW	claude.sh	1	#!/usr/bin/env bash	COMMENT
LOW	tools/workspace_status.sh	1	#!/usr/bin/env bash	COMMENT
LOW	test/install/install_test.sh	1	#!/usr/bin/env bash	COMMENT
LOW	test/install/install_test.sh	61	# a source) so no live bazel is needed. Verifies that install.sh:	COMMENT
LOW	test/shared/bazel_save.sh	1	#!/usr/bin/env bash	COMMENT
LOW	test/sky130hs/sky130hs_ip_global.cfg	1	// The values in this file (specificall HALO_WIDTH_V and CHANNEL_WIDTH_V) have	COMMENT
LOW	include/ord/Timing.h	1	// SPDX-License-Identifier: BSD-3-Clause	COMMENT
LOW	etc/DependencyInstaller.sh	1	#!/usr/bin/env bash	COMMENT
LOW	etc/DependencyInstaller.sh	881	_execute "Extracting or-tools..." tar --strip 1 --dir "${OR_TOOLS_PATH}" -xf "${or_tools_file}"	COMMENT
LOW	etc/find_dup_ids.sh	41	# the check would pass unconditionally. MODULE.bazel is declared as data purely	COMMENT
LOW	etc/run-clang-tidy.sh	1	#!/usr/bin/env bash	COMMENT
LOW	etc/cred_helper.py	1	#!/usr/bin/env python3	COMMENT
LOW	docs/requirements.txt	1	#	COMMENT
LOW	docs/requirements.txt	241	# via	COMMENT
LOW	docs/conf.py	1	# Configuration file for the Sphinx documentation builder.	COMMENT
LOW	docs/contrib/CodingPractices.md	321	#include <odb/defin.h>	COMMENT
LOW	docs/src/test/extract_utils.py	101	def extract_arguments(text):	COMMENT
LOW	docs/src/test/md_roff_compat.py	101		COMMENT
LOW	docs/src/scripts/extract_utils.py	101	def extract_arguments(text):	COMMENT
LOW	docs/src/scripts/md_roff_compat.py	101		COMMENT
LOW	bazel/install.sh	21	# Install binary and runfiles from bazel build.	COMMENT
LOW	bazel/requirements_lock_3_13.txt	941	--hash=sha256:060ca5c9f7ba57a08a1219e547b269fadf125ae25b06b9fa7f66768efb652d6d \	COMMENT
LOW	bazel/downloader.cfg	1	# Downloads from SourceForge try the BCR's Cloudflare mirror first. Every	COMMENT
LOW	bazel/gpu/cuda_placement_new.h	1	// SPDX-License-Identifier: BSD-3-Clause	COMMENT
LOW	bazel/gpu/cuda_placement_new.h	21	//	COMMENT
LOW	…s/github-actions-cron-sync-fork-from-upstream-PII.yaml	41	# To always overwrite master branch, set UPSTREAM_SYNC to the exact	COMMENT
LOW	…kflows/github-actions-cron-sync-fork-from-upstream.yml	41	# To always overwrite master branch, set UPSTREAM_SYNC to the exact	COMMENT
LOW	third-party/CMakeLists.txt	1	###############################################################################	COMMENT
LOW	third-party/CMakeLists.txt	21	##	COMMENT
LOW	…rtle/include/mockturtle/algorithms/cut_enumeration.hpp	41	#include <cstdint>	COMMENT
LOW	…rtle/include/mockturtle/algorithms/cut_enumeration.hpp	1721	}	COMMENT
LOW	…arty/mockturtle/include/mockturtle/algorithms/emap.hpp	41		COMMENT
LOW	…y/mockturtle/include/mockturtle/utils/tech_library.hpp	41		COMMENT
LOW	…d-party/mockturtle/include/mockturtle/networks/aig.hpp	41	#pragma once	COMMENT
LOW	…rd-party/mockturtle/lib/lorina/lorina/detail/utils.hpp	21	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING	COMMENT
LOW	…rd-party/mockturtle/lib/lorina/lorina/detail/utils.hpp	41	#include <numeric>	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	101	#define v_x25 ( x & 4 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	141	#define v_x45 ( v_x44 \| ( v_x44 << 2 ) )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	161	#define v_x59 ( x & 240 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	181	#define v_x75 ( v_x71 \| v_x74 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	261	case 48:	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	281	#define v_x131 ( v_x130 \| ( v_x130 << 4 ) )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	301	#define v_x147 ( v_x40 \| v_x146 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	321	#define v_x163 ( v_x162 \| ( v_x162 << 8 ) )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	341	return v_x177;	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	361	case 59:	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	381	#define v_x211 ( v_x210 << 10 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	401	#define v_x229 ( v_x225 \| v_x228 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	421	#define v_x249 ( v_x248 << 15 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	521	case 93:	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	541	#define v_x299 ( v_x298 \| ( v_x298 << 8 ) )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	561	#define v_x315 ( v_x98 \| v_x314 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	581	#define v_x331 ( v_x100 \| v_x330 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	601	#define v_x347 ( v_x346 \| ( v_x346 << 8 ) )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	621	#define v_x363 ( v_x362 \| ( v_x362 << 16 ) )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	641	#define v_x379 ( v_x376 \| v_x378 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	661	#define v_x395 ( v_x207 << 24 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	681	#define v_x413 ( v_x230 << 26 )	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	701	case 110:	COMMENT
LOW	third-party/mockturtle/lib/kitty/kitty/detail/shift.hpp	721	#define v_x447 ( v_x446 \| ( v_x446 << 2 ) )	COMMENT
2497 more matches not shown…

Cross-File Repetition279 hits · 1395 pts

Severity	File	Line	Snippet	Context
HIGH	docs/src/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	docs/src/scripts/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/ant/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/upf/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/rcx/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/fin/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/dft/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/psm/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/ppl/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/rsz/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/cts/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/rmp/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/pdn/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/tap/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/fsv/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/pad/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/odb/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/drt/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/wmk/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/gui/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/mpl/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/gpl/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/grt/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/ifp/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/utl/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/par/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/stt/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	src/dpl/test/manpage.py	0	date stamped into a page's footer, as yy/mm/dd. stamping the build date made every generated page differ from one day to	STRING
HIGH	docs/src/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	docs/src/scripts/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/ant/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/upf/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/rcx/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/fin/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/dft/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/psm/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/ppl/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/rsz/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/cts/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/rmp/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/pdn/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/tap/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/fsv/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/pad/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/odb/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/drt/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/wmk/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/gui/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/mpl/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/gpl/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/grt/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/ifp/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/utl/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/par/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/stt/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	src/dpl/test/manpage.py	0	add an example to the manpage. args: description: description of what the example does code: the actual code/command exa	STRING
HIGH	docs/src/test/manpage.py	0	add a reference to the see also section. args: reference: name of the command/function to reference section: manual sect	STRING
HIGH	docs/src/scripts/manpage.py	0	add a reference to the see also section. args: reference: name of the command/function to reference section: manual sect	STRING
HIGH	src/ant/test/manpage.py	0	add a reference to the see also section. args: reference: name of the command/function to reference section: manual sect	STRING
HIGH	src/upf/test/manpage.py	0	add a reference to the see also section. args: reference: name of the command/function to reference section: manual sect	STRING
219 more matches not shown…

Decorative Section Separators207 hits · 585 pts

Severity	File	Line	Snippet	Context
MEDIUM	CMakeLists.txt	305	# ==============================================================================	COMMENT
MEDIUM	CMakeLists.txt	307	# ==============================================================================	COMMENT
MEDIUM	test/timing_report_api.py	42	# ── Summary metrics ─────────────────────────────────────────	COMMENT
MEDIUM	test/timing_report_api.py	48	# ── Endpoint slacks: worst must equal WNS ───────────────────	COMMENT
MEDIUM	test/timing_report_api.py	64	# ── Clock info: sources must connect to the design ──────────	COMMENT
MEDIUM	test/timing_report_api.py	75	# ── Timing paths: structural invariants ─────────────────────	COMMENT
MEDIUM	test/timing_report_api.py	126	# ── Object cross-references on worst path ───────────────────	COMMENT
MEDIUM	test/install/install_test.sh	56	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	test/install/install_test.sh	68	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	include/ord/Timing.h	139	// ── Summary metrics ─────────────────────────────────────────	COMMENT
MEDIUM⚡	include/ord/Timing.h	144	// ── Endpoint slack map (histogram data source) ──────────────	COMMENT
MEDIUM⚡	include/ord/Timing.h	147	// ── Clock domain info ───────────────────────────────────────	COMMENT
MEDIUM⚡	include/ord/Timing.h	150	// ── Timing paths with arc detail ────────────────────────────	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	6	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	8	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	12	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	14	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	90	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	92	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	94	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	96	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	131	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	133	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	140	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	142	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	155	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	157	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	164	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	166	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	889	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	891	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	895	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	897	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	1111	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	1113	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	1119	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	1121	# ==============================================================================	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	1126	# ------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	etc/DependencyInstaller.sh	1128	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	45	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	47	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	110	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	112	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	212	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	214	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	242	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	244	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	279	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	307	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	341	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	343	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	396	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	398	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	427	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	429	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	463	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	465	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	498	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	500	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	etc/DependencyInstaller.sh	539	# ------------------------------------------------------------------------------	COMMENT
147 more matches not shown…

Unused Imports483 hits · 480 pts

Severity	File	Line	Context
LOW	test/timing_api_4.py	2	CODE
LOW	test/helpers.py	6	CODE
LOW	python/openroad/odb.py	4	CODE
LOW	python/openroad/__init__.py	4	CODE
LOW	python/openroad/__init__.py	5	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	10	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	11	CODE
LOW	python/openroad/__init__.py	12	CODE
LOW	python/openroad/__init__.py	12	CODE
LOW	python/openroad/__init__.py	12	CODE
LOW	python/openroad/utl.py	4	CODE
LOW	python/modules/fsv.py	4	CODE
LOW	python/modules/fsv.py	5	CODE
LOW	python/modules/dpl.py	4	CODE
LOW	python/modules/dpl.py	5	CODE
LOW	python/modules/psm.py	4	CODE
LOW	python/modules/psm.py	5	CODE
LOW	python/modules/drt.py	4	CODE
LOW	python/modules/drt.py	5	CODE
LOW	python/modules/odb.py	4	CODE
LOW	python/modules/odb.py	5	CODE
LOW	python/modules/ifp.py	4	CODE
LOW	python/modules/ifp.py	5	CODE
LOW	python/modules/ppl.py	4	CODE
LOW	python/modules/ppl.py	5	CODE
LOW	python/modules/rmp.py	4	CODE
LOW	python/modules/rmp.py	5	CODE
LOW	python/modules/rcx.py	4	CODE
LOW	python/modules/rcx.py	5	CODE
LOW	python/modules/exa.py	4	CODE
LOW	python/modules/exa.py	5	CODE
LOW	python/modules/ant.py	4	CODE
LOW	python/modules/ant.py	5	CODE
LOW	python/modules/cgt.py	4	CODE
LOW	python/modules/cgt.py	5	CODE
LOW	python/modules/wmk.py	4	CODE
LOW	python/modules/wmk.py	5	CODE
LOW	python/modules/tap.py	4	CODE
LOW	python/modules/tap.py	5	CODE
LOW	python/modules/cts.py	4	CODE
LOW	python/modules/cts.py	5	CODE
LOW	python/modules/utl.py	4	CODE
423 more matches not shown…

Self-Referential Comments64 hits · 190 pts

Severity	File	Line	Snippet	Context
MEDIUM	etc/DependencyInstaller.sh	818	# Create a temporary directory for downloads	COMMENT
MEDIUM	etc/cred_helper.py	48	# Create the JSON object with the required format	COMMENT
MEDIUM	docs/src/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	docs/src/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	docs/src/scripts/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	docs/src/scripts/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	bazel/yaml_fmt_test.sh	37	# Create a temporary directory to avoid modifying the user's workspace during testing	COMMENT
MEDIUM	src/ant/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/ant/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/upf/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/upf/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/rcx/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/rcx/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	…rcx/test/rcx_v2/FasterCapModel/scripts/limit_kill.bash	15	# Define the time limit in seconds (e.g., 10 seconds)	COMMENT
MEDIUM	src/rcx/test/rcx_v2/scripts/net_diff_files.py	18	# Create a 3x3 grid of subplots	COMMENT
MEDIUM	src/rcx/test/rcx_v2/scripts/net_diff_files.py	60	# Create a scatter plot	COMMENT
MEDIUM	src/rcx/calibration/run.sh	7	# Create a soft link to openroad executable	COMMENT
MEDIUM	src/rcx/calibration/fasterCap/scripts/limit_kill.bash	15	# Define the time limit in seconds (e.g., 10 seconds)	COMMENT
MEDIUM	src/fin/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/fin/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/dft/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/dft/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/psm/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/psm/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/ppl/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/ppl/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/rsz/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/rsz/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/cts/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/cts/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/rmp/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/rmp/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/pdn/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/pdn/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/tap/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/tap/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/fsv/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/fsv/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/pad/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/pad/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/odb/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/odb/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/drt/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/drt/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/wmk/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/wmk/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/gui/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/gui/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/mpl/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/mpl/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/gpl/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/gpl/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/grt/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/grt/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/ifp/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/ifp/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/utl/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/utl/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
MEDIUM	src/par/test/manpage.py	212	# Create a sample manpage	COMMENT
MEDIUM	src/par/test/manpage.py	252	# Create a temporary directory for the output	COMMENT
4 more matches not shown…

Hyper-Verbose Identifiers187 hits · 182 pts

Severity	File	Line	Snippet	Context
LOW	test/helpers.py	18	def if_bazel_change_working_dir_to(test_dir):	CODE
LOW	python/openroad/openroad_test.py	25	def test_thread_count_without_tech(self):	CODE
LOW	python/openroad/openroad_test.py	41	def test_design_without_block(self):	CODE
LOW	python/openroad/openroad_test.py	46	def test_several_techs_in_one_process(self):	CODE
LOW	python/openroad/modules_test.py	24	def test_every_module_loads_from_one_library(self):	CODE
LOW⚡	python/openroad/modules_test.py	45	def test_finder_only_claims_openroad_modules(self):	CODE
LOW⚡	python/openroad/modules_test.py	54	def test_tools_have_their_own_namespaces(self):	CODE
LOW⚡	python/openroad/modules_test.py	62	def test_objects_cross_modules(self):	CODE
LOW	etc/code_coverage_test.py	17	def test_static_bazel_uses_uncached_local_capture(self):	CODE
LOW	etc/code_coverage_test.py	32	def test_static_keeps_the_cmake_capture(self):	CODE
LOW	etc/code_coverage_test.py	43	def test_static_fails_when_capture_percentage_is_missing(self):	CODE
LOW	etc/code_coverage_test.py	53	def test_static_fails_when_capture_percentage_is_low(self):	CODE
LOW	etc/code_coverage_test.py	64	def test_upload_reuses_the_archive_without_running_a_capture(self):	CODE
LOW	etc/code_coverage_test.py	84	def test_upload_accepts_a_version_for_a_legacy_archive(self):	CODE
LOW	etc/code_coverage_test.py	96	def test_upload_requires_an_archive(self):	CODE
LOW	etc/code_coverage_test.py	119	def test_plain_text_initialization_error_is_reported(self):	CODE
LOW	etc/test_whittle.py	243	def test_parse_counts_with_extra_output(self):	CODE
LOW	etc/test_whittle.py	250	def test_cut_db_calls_openroad(self, mock_run):	CODE
LOW	etc/test_whittle.py	266	def test_cleanup_db_calls_openroad(self, mock_run):	CODE
LOW	docs/src/test/extract_utils.py	246	def check_function_signatures(text1, text2):	STRING
LOW	docs/src/test/helpers.py	18	def if_bazel_change_working_dir_to(test_dir):	CODE
LOW	docs/src/scripts/man_tcl_check.py	12	def test_command_counts_match(self):	CODE
LOW	docs/src/scripts/extract_utils.py	246	def check_function_signatures(text1, text2):	STRING
LOW	docs/src/scripts/test_extract_utils.py	19	def test_checker_off_excluded(self):	STRING
LOW	docs/src/scripts/test_extract_utils.py	51	def test_proc_redirect_counted(self):	STRING
LOW	docs/src/scripts/test_extract_utils.py	64	def test_proc_redirect_does_not_consume_next_command(self):	STRING
LOW	docs/src/scripts/test_extract_utils.py	118	def test_checker_off_no_spaces(self):	STRING
LOW	docs/src/scripts/test_extract_utils.py	127	def test_checker_off_on_multiline_closing_brace(self):	STRING
LOW	docs/src/scripts/test_extract_utils.py	155	def test_checker_off_excluded(self):	STRING
LOW	bazel/stamp_version_test.py	19	def test_overwrites_placeholder(self):	CODE
LOW	bazel/stamp_version_test.py	25	def test_shorter_version_clears_old_text(self):	CODE
LOW	bazel/stamp_version_test.py	57	def test_missing_version_keeps_placeholder(self):	CODE
LOW	bazel/stamp_version_binary_test.py	25	def test_stamped_binary_reports_version(self):	CODE
LOW	src/ant/test/ant_man_tcl_check.py	12	def test_command_counts_match(self):	CODE
LOW	src/ant/test/extract_utils.py	246	def check_function_signatures(text1, text2):	STRING
LOW	src/ant/test/ant_api.py	22	def test_check_antennas_counts(self):	CODE
LOW	src/ant/test/ant_api.py	27	def test_check_antennas_arguments(self):	CODE
LOW	src/ant/test/ant_api.py	61	def test_ratio_margin_lowers_required(self):	CODE
LOW	src/ant/test/helpers.py	18	def if_bazel_change_working_dir_to(test_dir):	CODE
LOW	src/upf/test/extract_utils.py	246	def check_function_signatures(text1, text2):	STRING
LOW	src/upf/test/upf_man_tcl_check.py	12	def test_command_counts_match(self):	CODE
LOW	src/rcx/test/extract_utils.py	246	def check_function_signatures(text1, text2):	STRING
LOW	src/rcx/test/test_dielectric_epsilon.py	168	def test_shapeorder_uses_global_dielectric_index(self):	STRING
LOW	src/rcx/test/test_dielectric_epsilon.py	180	def test_no_indexerror_at_topmost_dielectric(self):	STRING
LOW	src/rcx/test/test_dielectric_epsilon.py	197	def test_dielectric_fill_panel_uses_correct_neighbor_epsilon(self):	STRING
LOW⚡	src/rcx/test/test_dielectric_epsilon.py	217	def test_unmatched_dielectric_name_raises(self):	STRING
LOW⚡	src/rcx/test/test_dielectric_epsilon.py	226	def test_duplicate_dielectric_name_raises(self):	STRING
LOW⚡	src/rcx/test/test_dielectric_epsilon.py	234	def test_safe_diel_epsilon_clamps_both_ends(self):	STRING
LOW	src/rcx/test/rcx_man_tcl_check.py	12	def test_command_counts_match(self):	CODE
LOW	src/rcx/test/rcx_aux.py	11	def set_extraction_rules_file(design, *, filename=""):	CODE
LOW	src/rcx/test/helpers.py	18	def if_bazel_change_working_dir_to(test_dir):	CODE
LOW	…asterCapModel/scripts/UniversalFormat2FasterCap_923.py	606	def write_dielectric_side_panels(	CODE
LOW	…asterCapModel/scripts/UniversalFormat2FasterCap_923.py	699	def write_dielectric_bottom_panel(	CODE
LOW	…asterCapModel/scripts/UniversalFormat2FasterCap_923.py	741	def write_dielectric_top_panel(	CODE
LOW	…asterCapModel/scripts/UniversalFormat2FasterCap_923.py	960	def insert_dielectric_into_pattern_file(	CODE
LOW	…asterCapModel/scripts/UniversalFormat2FasterCap_923.py	988	def insert_conductor_into_pattern_file(	CODE
LOW	…ion/fasterCap/scripts/UniversalFormat2FasterCap_923.py	576	def write_dielectric_side_panels(	CODE
LOW	…ion/fasterCap/scripts/UniversalFormat2FasterCap_923.py	669	def write_dielectric_bottom_panel(	CODE
LOW	…ion/fasterCap/scripts/UniversalFormat2FasterCap_923.py	711	def write_dielectric_top_panel(	CODE
LOW	…ion/fasterCap/scripts/UniversalFormat2FasterCap_923.py	930	def insert_dielectric_into_pattern_file(	CODE
127 more matches not shown…

Deep Nesting144 hits · 144 pts

Severity	File	Line	Context
LOW	etc/bazel-cache-summary.py	82	CODE
LOW	etc/whittle.py	327	CODE
LOW	etc/whittle.py	436	CODE
LOW	docs/src/test/extract_utils.py	174	CODE
LOW	docs/src/test/md_roff_compat.py	17	CODE
LOW	docs/src/test/md_roff_compat.py	38	CODE
LOW	docs/src/test/md_roff_compat.py	142	CODE
LOW	docs/src/scripts/extract_utils.py	174	CODE
LOW	docs/src/scripts/md_roff_compat.py	17	CODE
LOW	docs/src/scripts/md_roff_compat.py	38	CODE
LOW	docs/src/scripts/md_roff_compat.py	142	CODE
LOW	bazel/manpages_impl.py	45	CODE
LOW	src/ant/test/extract_utils.py	174	CODE
LOW	src/ant/test/md_roff_compat.py	17	CODE
LOW	src/ant/test/md_roff_compat.py	38	CODE
LOW	src/ant/test/md_roff_compat.py	142	CODE
LOW	src/upf/test/extract_utils.py	174	CODE
LOW	src/upf/test/md_roff_compat.py	17	CODE
LOW	src/upf/test/md_roff_compat.py	38	CODE
LOW	src/upf/test/md_roff_compat.py	142	CODE
LOW	src/rcx/test/extract_utils.py	174	CODE
LOW	src/rcx/test/md_roff_compat.py	17	CODE
LOW	src/rcx/test/md_roff_compat.py	38	CODE
LOW	src/rcx/test/md_roff_compat.py	142	CODE
LOW	…asterCapModel/scripts/UniversalFormat2FasterCap_923.py	242	CODE
LOW	…asterCapModel/scripts/UniversalFormat2FasterCap_923.py	315	CODE
LOW	…asterCapModel/scripts/UniversalFormat2FasterCap_923.py	1002	CODE
LOW	src/rcx/test/rcx_v2/scripts/net_diff_files.py	384	CODE
LOW	…ion/fasterCap/scripts/UniversalFormat2FasterCap_923.py	212	CODE
LOW	…ion/fasterCap/scripts/UniversalFormat2FasterCap_923.py	285	CODE
LOW	…ion/fasterCap/scripts/UniversalFormat2FasterCap_923.py	972	CODE
LOW	src/rcx/rule_scripts/UniversalFormat2FasterCap_923.py	212	CODE
LOW	src/rcx/rule_scripts/UniversalFormat2FasterCap_923.py	285	CODE
LOW	src/rcx/rule_scripts/UniversalFormat2FasterCap_923.py	972	CODE
LOW	src/fin/test/extract_utils.py	174	CODE
LOW	src/fin/test/md_roff_compat.py	17	CODE
LOW	src/fin/test/md_roff_compat.py	38	CODE
LOW	src/fin/test/md_roff_compat.py	142	CODE
LOW	src/dft/test/extract_utils.py	174	CODE
LOW	src/dft/test/md_roff_compat.py	17	CODE
LOW	src/dft/test/md_roff_compat.py	38	CODE
LOW	src/dft/test/md_roff_compat.py	142	CODE
LOW	src/psm/test/extract_utils.py	174	CODE
LOW	src/psm/test/md_roff_compat.py	17	CODE
LOW	src/psm/test/md_roff_compat.py	38	CODE
LOW	src/psm/test/md_roff_compat.py	142	CODE
LOW	src/ppl/test/extract_utils.py	174	CODE
LOW	src/ppl/test/ppl_aux.py	9	CODE
LOW	src/ppl/test/ppl_aux.py	288	CODE
LOW	src/ppl/test/md_roff_compat.py	17	CODE
LOW	src/ppl/test/md_roff_compat.py	38	CODE
LOW	src/ppl/test/md_roff_compat.py	142	CODE
LOW	src/rsz/test/extract_utils.py	174	CODE
LOW	src/rsz/test/md_roff_compat.py	17	CODE
LOW	src/rsz/test/md_roff_compat.py	38	CODE
LOW	src/rsz/test/md_roff_compat.py	142	CODE
LOW	src/cts/test/extract_utils.py	174	CODE
LOW	src/cts/test/md_roff_compat.py	17	CODE
LOW	src/cts/test/md_roff_compat.py	38	CODE
LOW	src/cts/test/md_roff_compat.py	142	CODE
84 more matches not shown…

Structural Annotation Overuse68 hits · 124 pts

Severity	File	Line	Snippet	Context
LOW	etc/CodeCoverage.sh	126	# Step 1: Initialize a build. Fetch a cloud upload url.	COMMENT
LOW	etc/CodeCoverage.sh	144	# Step 2: Store response data to use in later stages.	COMMENT
LOW⚡	etc/CodeCoverage.sh	164	# Step 3: Upload the tarball to the Cloud.	COMMENT
LOW⚡	etc/CodeCoverage.sh	173	# Step 4: Trigger the build on Scan.	COMMENT
LOW	docs/user/Bazel-developer-activities.md	129	## Step 1: Read Starlark with intent	COMMENT
LOW	docs/user/Bazel-developer-activities.md	140	## Step 2: Learn by tracing one macro end-to-end	COMMENT
LOW⚡	docs/user/Bazel-developer-activities.md	151	## Step 3: Make no-op/refactor-safe edits first	COMMENT
LOW⚡	docs/user/Bazel-developer-activities.md	161	## Step 4: Introduce behavior changes behind clear conditions	COMMENT
LOW⚡	docs/user/Bazel-developer-activities.md	169	## Step 5: Validate like a maintainer	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	41	### Step 1: Parse Input Data	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	47	### Step 2: Analyze Label Semantics	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	59	### Step 3: Establish General Labeling Principles	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	69	### Step 4: Triage Issues	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	78	### Step 5: Construct Output	COMMENT
LOW	src/dbSta/src/DmpCeffLambertWDelayCalc.md	198	#### Step 1: Dominant-Pole Reduction	COMMENT
LOW	src/dbSta/src/DmpCeffLambertWDelayCalc.md	208	#### Step 2: Target Threshold Equation	COMMENT
LOW	src/dbSta/src/DmpCeffLambertWDelayCalc.md	223	#### Step 3: Transforming into $w e^w = \xi$	COMMENT
LOW	src/dbSta/src/DmpCeffLambertWDelayCalc.md	248	#### Step 4: Applying Lambert $W$	COMMENT
LOW	src/par/src/Refiner.cpp	207	// Step 1 : found all the boundary hyperedges	COMMENT
LOW	src/par/src/Refiner.cpp	221	// Step 2: check all the non-fixed vertices	COMMENT
LOW⚡	src/par/src/Refiner.cpp	244	// Step 1 : found all the boundary hyperedges	COMMENT
LOW⚡	src/par/src/Refiner.cpp	252	// Step 2: check all the non-fixed vertices	COMMENT
LOW	src/par/src/Refiner.cpp	523	// Step 1: check the cut cost	COMMENT
LOW	src/par/src/Refiner.cpp	550	// Step 2: check timing cost	COMMENT
LOW⚡	src/par/src/PriorityQueue.cpp	94	// Step 1: check the left child first	COMMENT
LOW⚡	src/par/src/PriorityQueue.cpp	100	// Step 2: check the right child second	COMMENT
LOW⚡	src/par/src/PriorityQueue.cpp	207	// Step 1: check if current index is less than left child	COMMENT
LOW⚡	src/par/src/PriorityQueue.cpp	214	// Step 2: check if the max index is less than right child	COMMENT
LOW⚡	src/par/src/KWayPMRefine.cpp	52	// Step 1: determine the matching score	COMMENT
LOW⚡	src/par/src/KWayPMRefine.cpp	59	// Step 2: update the solution based on calculated maximum matching	COMMENT
LOW	src/par/src/KWayPMRefine.cpp	98	// Step 1: determine the matching score	COMMENT
LOW	src/par/src/KWayPMRefine.cpp	121	// Step 2: update the solution based on calculated maximum matching	COMMENT
LOW	src/par/src/TritonPart.cpp	1564	// Step 1: find the top_n critical timing paths	COMMENT
LOW	src/par/src/TritonPart.cpp	1913	// Step 1 : create all the coarsening, partitionig and refinement class	COMMENT
LOW	src/par/src/ArtNetSpec.cpp	186	// Step 1: find the top_n critical timing paths	COMMENT
LOW⚡	src/par/src/ILPRefine.cpp	39	// Step 1: identify all the boundary vertices (boundary vertices will not	COMMENT
LOW⚡	src/par/src/ILPRefine.cpp	43	// Step 2: extract the related information	COMMENT
LOW⚡	src/par/src/Evaluator.cpp	652	// Step 1: calculate the path_timing_cost_	COMMENT
LOW⚡	src/par/src/Evaluator.cpp	658	// Step 2: calculate the hyperedge timing cost	COMMENT
LOW⚡	src/par/src/Evaluator.cpp	668	// Step 3: traverse all the paths and lay the path weight on corresponding	COMMENT
LOW	src/par/src/Evaluator.cpp	795	// Step 2: update the path_timing_attr_.	COMMENT
LOW	src/par/src/Partitioner.cpp	115	// Step 1: check fixed vertices	COMMENT
LOW	src/par/src/Partitioner.cpp	126	// Step 2: put all the vertices related to critical timing paths together	COMMENT
LOW⚡	src/par/src/Partitioner.cpp	139	// Step 3: check remaining vertices	COMMENT
LOW⚡	src/par/src/Partitioner.cpp	147	// Step 4: concatenate path_vertices and vertices	COMMENT
LOW	src/par/src/Partitioner.cpp	324	// Step 1: check fixed vertices	COMMENT
LOW	src/par/src/Partitioner.cpp	340	// Step 2: sort remaining vertices based on vertex	COMMENT
LOW	src/par/src/Coarsener.cpp	724	// Step 1: identify the contracted hyperedges	COMMENT
LOW	src/par/src/Coarsener.cpp	828	// Step 2: identify all the timing paths	COMMENT
LOW	src/par/src/Coarsener.cpp	916	// Step 3: create the contracted hypergraph	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	79	// Step 1: run initial partitioning with different random seed	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	80	// Step 2: run cut-overlay clustering to enhance the solution	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	81	// Step 3: Guided v-cycle	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	83	// Step 1: run initial partitioning with different random seed	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	144	// Step 1: run coarsening	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	145	// Step 2: run initial partitioning	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	146	// Step 3: run refinement	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	147	// Step 4: cut-overlay clustering and ILP-based partitioning	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	149	// Step 1: run coarsening	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	152	// Step 2: run initial partitioning	COMMENT
8 more matches not shown…

Verbosity Indicators60 hits · 110 pts

Severity	File	Line	Snippet	Context
LOW	etc/CodeCoverage.sh	126	# Step 1: Initialize a build. Fetch a cloud upload url.	COMMENT
LOW	etc/CodeCoverage.sh	144	# Step 2: Store response data to use in later stages.	COMMENT
LOW⚡	etc/CodeCoverage.sh	164	# Step 3: Upload the tarball to the Cloud.	COMMENT
LOW⚡	etc/CodeCoverage.sh	173	# Step 4: Trigger the build on Scan.	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	41	### Step 1: Parse Input Data	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	47	### Step 2: Analyze Label Semantics	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	59	### Step 3: Establish General Labeling Principles	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	69	### Step 4: Triage Issues	COMMENT
LOW⚡	.github/commands/openroad-scheduled-triage.toml	78	### Step 5: Construct Output	COMMENT
LOW	src/odb/src/defin/definReader.cpp	88	// We need to check if the inst is sequential to decide what is a	COMMENT
LOW	src/par/src/Refiner.cpp	207	// Step 1 : found all the boundary hyperedges	COMMENT
LOW	src/par/src/Refiner.cpp	221	// Step 2: check all the non-fixed vertices	COMMENT
LOW⚡	src/par/src/Refiner.cpp	244	// Step 1 : found all the boundary hyperedges	COMMENT
LOW⚡	src/par/src/Refiner.cpp	252	// Step 2: check all the non-fixed vertices	COMMENT
LOW	src/par/src/Refiner.cpp	523	// Step 1: check the cut cost	COMMENT
LOW	src/par/src/Refiner.cpp	550	// Step 2: check timing cost	COMMENT
LOW⚡	src/par/src/PriorityQueue.cpp	94	// Step 1: check the left child first	COMMENT
LOW⚡	src/par/src/PriorityQueue.cpp	100	// Step 2: check the right child second	COMMENT
LOW⚡	src/par/src/PriorityQueue.cpp	207	// Step 1: check if current index is less than left child	COMMENT
LOW⚡	src/par/src/PriorityQueue.cpp	214	// Step 2: check if the max index is less than right child	COMMENT
LOW⚡	src/par/src/KWayPMRefine.cpp	52	// Step 1: determine the matching score	COMMENT
LOW⚡	src/par/src/KWayPMRefine.cpp	59	// Step 2: update the solution based on calculated maximum matching	COMMENT
LOW	src/par/src/KWayPMRefine.cpp	98	// Step 1: determine the matching score	COMMENT
LOW	src/par/src/KWayPMRefine.cpp	121	// Step 2: update the solution based on calculated maximum matching	COMMENT
LOW	src/par/src/TritonPart.cpp	1564	// Step 1: find the top_n critical timing paths	COMMENT
LOW	src/par/src/TritonPart.cpp	1913	// Step 1 : create all the coarsening, partitionig and refinement class	COMMENT
LOW	src/par/src/ArtNetSpec.cpp	186	// Step 1: find the top_n critical timing paths	COMMENT
LOW⚡	src/par/src/ILPRefine.cpp	39	// Step 1: identify all the boundary vertices (boundary vertices will not	COMMENT
LOW⚡	src/par/src/ILPRefine.cpp	43	// Step 2: extract the related information	COMMENT
LOW⚡	src/par/src/Evaluator.cpp	652	// Step 1: calculate the path_timing_cost_	COMMENT
LOW⚡	src/par/src/Evaluator.cpp	658	// Step 2: calculate the hyperedge timing cost	COMMENT
LOW⚡	src/par/src/Evaluator.cpp	668	// Step 3: traverse all the paths and lay the path weight on corresponding	COMMENT
LOW	src/par/src/Evaluator.cpp	795	// Step 2: update the path_timing_attr_.	COMMENT
LOW	src/par/src/Partitioner.cpp	115	// Step 1: check fixed vertices	COMMENT
LOW	src/par/src/Partitioner.cpp	126	// Step 2: put all the vertices related to critical timing paths together	COMMENT
LOW⚡	src/par/src/Partitioner.cpp	139	// Step 3: check remaining vertices	COMMENT
LOW⚡	src/par/src/Partitioner.cpp	147	// Step 4: concatenate path_vertices and vertices	COMMENT
LOW	src/par/src/Partitioner.cpp	324	// Step 1: check fixed vertices	COMMENT
LOW	src/par/src/Partitioner.cpp	340	// Step 2: sort remaining vertices based on vertex	COMMENT
LOW	src/par/src/Coarsener.cpp	724	// Step 1: identify the contracted hyperedges	COMMENT
LOW	src/par/src/Coarsener.cpp	828	// Step 2: identify all the timing paths	COMMENT
LOW	src/par/src/Coarsener.cpp	916	// Step 3: create the contracted hypergraph	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	79	// Step 1: run initial partitioning with different random seed	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	80	// Step 2: run cut-overlay clustering to enhance the solution	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	81	// Step 3: Guided v-cycle	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	83	// Step 1: run initial partitioning with different random seed	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	144	// Step 1: run coarsening	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	145	// Step 2: run initial partitioning	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	146	// Step 3: run refinement	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	147	// Step 4: cut-overlay clustering and ILP-based partitioning	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	149	// Step 1: run coarsening	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	152	// Step 2: run initial partitioning	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	171	// Step 3: run refinement	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	179	// Step 4: cut-overlay clustering and ILP-based partitioning	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	232	// Step 1: run coarsening	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	233	// Step 2: run refinement	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	235	// Step 1: run coarsening	COMMENT
LOW⚡	src/par/src/Multilevel.cpp	238	// Step 2: run initial refinement	COMMENT
LOW	src/par/src/Multilevel.cpp	108	// Step 2: run cut-overlay clustering to enhance the solution	COMMENT
LOW	src/par/src/Multilevel.cpp	121	// Step 3: Guided v-cycle. Note that hgraph has been updated.	COMMENT

Empty Error Handlers9 hits · 45 pts

Severity	File	Line	Snippet	Context
HIGH	etc/whittle.py	324	except ProcessLookupError:	CODE
HIGH	src/fsv/test/field_solver_python.py	114	except RuntimeError:	CODE
HIGH	src/fsv/test/field_solver_python.py	101	except ValueError:	CODE
HIGH	src/fsv/test/field_solver_python.py	107	except ValueError:	CODE
HIGH	src/wmk/test/numeric_options.py	49	except RuntimeError:	CODE
HIGH	src/ifp/test/init_floorplan_gap.py	37	except Exception:	CODE
HIGH	src/ifp/test/init_floorplan_gap.py	43	except Exception:	CODE
HIGH	src/ifp/test/init_floorplan_gap.py	48	except Exception:	CODE
HIGH	src/ifp/test/init_floorplan_gap.py	53	except Exception:	CODE

AI Slop Vocabulary11 hits · 30 pts

Severity	File	Line	Snippet	Context
LOW	test/shared/regression.sh	11	# just use the path of the regression script, but we can't since $0 points to	COMMENT
MEDIUM	docs/src/test/bazel_developer_activities_check.py	18	# Normalize for robust matching while preserving readability in errors.	COMMENT
LOW	.github/workflows/github-actions-macos-bazel.yml	54	# and just use the anon read path.	COMMENT
MEDIUM	src/web/src/tile-request.js	327	// zoom-animation frames and robust even if zoomSnap:0 is re-enabled.	COMMENT
MEDIUM	src/web/src/tile_generator.cpp	4292	// Anchor on absolute multiples of `step` (seamless across tiles). Integer	COMMENT
MEDIUM	src/web/src/tile_generator.cpp	5040	// space so the hatch is seamless across tile boundaries.	COMMENT
MEDIUM	src/web/src/tile_generator.h	1166	// hatch stays seamless across tile boundaries. Only meaningful when	COMMENT
MEDIUM	src/odb/src/defin/definReader.cpp	380	// definition was read). Be robust and create it if it does not.	COMMENT
MEDIUM	src/gpl/src/nesterovBase.cpp	3114	// copy density to utilize FFT	COMMENT
MEDIUM	src/gpl/src/nesterovBase.cpp	5328	// Essentially, the function being integrated is the product	COMMENT
MEDIUM	src/grt/src/cugr/src/GridGraph.cpp	579	// First non-zero via resistance is the reference (normally layer 0; robust	COMMENT

Excessive Try-Catch Wrapping20 hits · 27 pts

Severity	File	Line	Snippet	Context
LOW	etc/file_to_string.py	34	except Exception as e:	CODE
MEDIUM	etc/file_to_string.py	35	print(f"Error reading {file_name}: {e}")	CODE
MEDIUM	etc/whittle.py	423	print(f"Error Code found: {error}")	CODE
LOW	docs/src/test/man_tcl_params.py	94	except Exception as e:	CODE
LOW	src/cts/test/no_clocks.py	21	except Exception as inst:	CODE
LOW	src/cts/test/no_sinks.py	23	except Exception as inst:	CODE
LOW	src/pdn/test/offgrid.py	30	except Exception as inst:	CODE
LOW	src/pdn/test/max_width.py	26	except Exception as inst:	CODE
LOW	src/pdn/test/min_width.py	30	except Exception as inst:	CODE
LOW	src/pdn/test/widthtable.py	25	except Exception as inst:	CODE
MEDIUM	src/dbSta/src/fit_pade.py	33	print(f"Error: Could not find dataset at {args.csv_path}")	CODE
MEDIUM	src/odb/doc/generate_railroad_diagrams.py	136	print("Error: Missing required tool(s) in src/odb/doc/tools/:", file=sys.stderr)	CODE
MEDIUM	src/odb/doc/generate_railroad_diagrams.py	161	print(f"Error: grammar file not found: {y_file}", file=sys.stderr)	CODE
LOW⚡	src/ifp/test/init_floorplan_gap.py	37	except Exception:	CODE
LOW⚡	src/ifp/test/init_floorplan_gap.py	43	except Exception:	CODE
LOW⚡	src/ifp/test/init_floorplan_gap.py	48	except Exception:	CODE
LOW⚡	src/ifp/test/init_floorplan_gap.py	53	except Exception:	CODE
LOW	src/utl/test/test_error.py	5	except Exception as inst:	CODE
LOW	src/dpl/test/obstruction2.py	16	except Exception as inst:	CODE
LOW	src/dpl/test/check1.py	13	except Exception as inst:	CODE

AI Structural Patterns14 hits · 14 pts

Severity	File	Line	Context
LOW	src/rcx/test/rcx_aux.py	15	CODE
LOW	src/rcx/test/rcx_aux.py	75	CODE
LOW	src/psm/test/pdnsim_aux.py	8	CODE
LOW	src/rsz/test/rsz_aux.py	40	CODE
LOW	src/rsz/test/rsz_aux.py	78	CODE
LOW	src/cts/test/cts_aux.py	7	CODE
LOW	src/rmp/test/rmp_aux.py	44	CODE
LOW	src/pdn/test/pdn_aux.py	182	CODE
LOW	src/pdn/test/pdn_aux.py	269	CODE
LOW	src/pdn/test/pdn_aux.py	398	CODE
LOW	src/pdn/test/pdn_aux.py	526	CODE
LOW	src/pdn/test/pdn_aux.py	607	CODE
LOW	src/drt/test/drt_aux.py	9	CODE
LOW	src/par/test/par_aux.py	10	CODE

Example Usage Blocks8 hits · 12 pts

Severity	File	Line	Snippet	Context
LOW	claude.sh	6	# Usage:	COMMENT
LOW	etc/find_messages.py	6	# Usage:	COMMENT
LOW	src/web/src/embed_font.py	7	# Usage:	COMMENT
LOW	src/utl/include/utl/prometheus/gauge.h	148	/// Example usage:	COMMENT
LOW	src/utl/include/utl/prometheus/counter.h	120	/// Example usage:	COMMENT
LOW	src/utl/include/utl/prometheus/family.h	379	/// Example usage:	COMMENT
LOW	src/utl/include/utl/prometheus/histogram.h	162	/// Example usage:	COMMENT
LOW	src/utl/include/utl/prometheus/summary.h	154	/// Example usage:	COMMENT

Modern AI Meta-Vocabulary3 hits · 11 pts

Severity	File	Line	Snippet	Context
MEDIUM⚡	src/web/src/edit-dialogs.js	11	// modal scaffold and CSS as menu-bar.js's file dialog.	COMMENT
MEDIUM⚡	src/web/src/edit-dialogs.js	13	// ── Shared modal scaffold ────────────────────────────────────────────────────	COMMENT
MEDIUM	src/grt/src/cugr/src/PatternRoute.cpp	258	nullptr)); // direction -> num_dag_nodes_ -> scaffold node	CODE

Cross-Language Confusion1 hit · 2 pts

Severity	File	Line	Snippet	Context
HIGH	src/fsv/test/golden/fv3d_golden.py	13	python3 -m venv venv && venv/bin/pip install numpy scipy pyamg	STRING

TODO Padding1 hit · 2 pts

Severity	File	Line	Snippet	Context
LOW	src/pdn/src/via_repair.cpp	133	// TODO: implement generate via	COMMENT

Slop Phrases1 hit · 1 pts

Severity	File	Line	Snippet	Context
LOW	third-party/lodepng/lodepng.cpp	74	lodepng source code. Don't forget to remove "static" if you copypaste them	CODE

Fake / Example Data1 hit · 1 pts

Severity	File	Line	Snippet	Context
LOW	src/web/test/js/test-inspector.js	165	describe('placeholder', () => {	CODE

Modern Structural Boilerplate1 hit · 1 pts

Severity	File	Line	Snippet	Context
LOW	src/odb/src/codeGenerator/parser.py	66	def set_comment_str(self, comment: str) -> None:	CODE

Redundant / Tautological Comments1 hit · 1 pts

Severity	File	Line	Snippet	Context
LOW	etc/DependencyInstaller.sh	823	# Check if a system-installed version of OR-Tools is present	COMMENT

The-OpenROAD-Project/OpenROAD

Open-Source Code Quality, Security and Technical Debt Review