Telegram-iOS
This report summarizes scanner evidence for TelegramMessenger/Telegram-iOS, a Swift project with 9,380 GitHub stars. SynthScan examined 6,602,017 lines of code across 20484 source files, recording 14277 pattern matches distributed across 25 syntactic categories. The legacy adjusted pattern signal is 2.8 (Low pattern signal); it is not an authorship estimate.
Use the findings to ask whether maintainers can explain intent, verify dependencies, simplify unnecessary scaffolding, and focus review effort. Risk Payload v1 adds ownership, supply-chain, over-engineering, and review-effort vectors when available. These are prompts for human verification, not probabilities, security findings, or measured maintenance costs.
Use each vector to guide manual verification of the underlying findings.
Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.
Can maintainers explain intent, assumptions, and trade-offs? 13559 finding(s).
Are imports declared and package/API names verified? 513 finding(s).
Are wrappers, guards, and repeated structures necessary? 562 finding(s).
Which changes need focused human review? 14277 finding(s).
This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.
Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.
This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.
The scanner identified 14277 distinct pattern matches across 25 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.
Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | CLAUDE.md | 81 | COMMENT | |
| LOW | tools/main.cpp | 1 | #include <mach-o/arch.h> | COMMENT |
| LOW | Tests/NativeNavigationReference/main.swift | 1 | // A minimal native UIKit navigation app: the reference the custom navigation bar is compared against (footage, lldb). | COMMENT |
| LOW | Tests/NativeNavigationReference/main.swift | 21 | // n screens deep (for pop). Slow-motion: `xcrun simctl spawn <udid> notifyutil -s | COMMENT |
| LOW | Tests/NativeNavigationReference/main.swift | 41 | // and back, with the root's left item Edit <-> a prominent Done); pushed screens have one plain image item (a chat's | COMMENT |
| LOW | Tests/NativeNavigationReference/measure/inject_probe.py | 1 | # Usage (Telegram on the simulator, at the screen to measure): | COMMENT |
| LOW | …s/ComposerHarness/UITests/HarnessEditMenuUITests.swift | 1 | import XCTest | COMMENT |
| LOW | …s/ComposerHarness/UITests/HarnessEditMenuUITests.swift | 61 | /// **Second defect in this family: the FIRST, focusing tap raises the edit menu.** | COMMENT |
| LOW | …oserHarness/UITests/HarnessLongPressCaretUITests.swift | 1 | import XCTest | COMMENT |
| LOW | …s/ComposerHarness/UITests/HarnessTextDragUITests.swift | 1 | import XCTest | COMMENT |
| LOW | …arness/Tests/HarnessDetailsTitleCrossDeleteTests.swift | 1 | import XCTest | COMMENT |
| LOW | …poserHarness/Tests/HarnessAutocorrectMarkerTests.swift | 1 | import XCTest | COMMENT |
| LOW | …poserHarness/Tests/HarnessAutocorrectMarkerTests.swift | 21 | /// **How it was seen.** K1, 2026-09-23, eighth roam, software keyboard driven by `axe touch` on the | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 21 | /// - `insert`: `UIKeyInput.insertText` on `TGIDObservingBlockTextView` — Latin, punctuation, emoji | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 41 | /// clear, then a letter); a very long typed run; pastes of pipe tables, a nested quote and a very long | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 61 | /// | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 81 | /// | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 101 | /// changes something) and `environment` before it (dark / light theme, 340 / 402pt, left in place; reset | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 121 | /// **Invariants after every step** (`violations()`, each re-read once after a further 0.3 s settle | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 141 | /// **At the end of a sequence:** | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 201 | static var lineOps = false | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 221 | /// ordering is not a product defect; the fuzz waits for the paste instead. | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 241 | static var customInserts = false | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 321 | /// Plain text written to the pasteboard, then `paste:` — markdown lists, headings, quotes, code | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 341 | /// body paragraph with no formatting carried over. | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 361 | case keyWalk(down: Bool, from: Int, presses: Int, extend: Bool) | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 1341 | static let compositionLeavesFirstCandidate = "a composition left its first candidate behind" | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 1381 | // detailsSelectionAxis, detailsTitleLost, emptyContainerCopyDropped, detailsAtEndCopyDropped; | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 1401 | // chatInsertRebuildsStructure (`HarnessChatInsertStructureTests`) and emptyTrailingContainerDuplicated | COMMENT |
| LOW | …Harness/Tests/HarnessAuthorLineFallbackFaceTests.swift | 1 | import XCTest | COMMENT |
| LOW | …serHarness/Tests/HarnessCrossBlockPasteUndoTests.swift | 1 | import XCTest | COMMENT |
| LOW | …mposerHarness/Tests/HarnessTableCaretRevealTests.swift | 1 | import XCTest | COMMENT |
| LOW | …mposerHarness/Tests/HarnessTableCaretRevealTests.swift | 21 | /// own run scroll view, which this never touches"), and the run scroll view has no caret logic. | COMMENT |
| LOW | …Tests/HarnessPasteOverPartialTableSelectionTests.swift | 1 | import XCTest | COMMENT |
| LOW | …Tests/HarnessPasteOverPartialTableSelectionTests.swift | 21 | /// [table ( | | "z") …]; the engine drops the emptied cells | COMMENT |
| LOW | …oserHarness/Tests/HarnessMarkdownPasteShapeTests.swift | 1 | import XCTest | COMMENT |
| LOW | …serHarness/Tests/HarnessTypedTextBlockStartTests.swift | 1 | import XCTest | COMMENT |
| LOW | …ness/Tests/HarnessAuthorLineMidClusterCrashTests.swift | 1 | import XCTest | COMMENT |
| LOW | …ness/Tests/HarnessTypedTextBeforeLinkColourTests.swift | 1 | import XCTest | COMMENT |
| LOW | …arness/Tests/HarnessCompositionUndoResidualTests.swift | 1 | import XCTest | COMMENT |
| LOW | …arness/Tests/HarnessCompositionUndoResidualTests.swift | 21 | /// stock `UITextView`'s are. Here no deletion registered a step, so the composition continued a run | COMMENT |
| LOW | …arness/Tests/HarnessCompositionUndoResidualTests.swift | 41 | /// composed → [p "Cob:"] [code "\nl한글"] typed → [p "Cob:"] [code "\nl한글"] [p ""] | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessLineStartKeyTests.swift | 1 | import XCTest | COMMENT |
| LOW | …s/ComposerHarness/Tests/HarnessLineStartKeyTests.swift | 21 | /// | COMMENT |
| LOW | …serHarness/Tests/HarnessPastedForeignColourTests.swift | 1 | import XCTest | COMMENT |
| LOW | …poserHarness/Tests/HarnessLinkRemovalColourTests.swift | 1 | import XCTest | COMMENT |
| LOW | …/ComposerHarness/Tests/HarnessMarkdownPasteTests.swift | 1 | import XCTest | COMMENT |
| LOW | Tests/ComposerHarness/Tests/HarnessRedoCaretTests.swift | 1 | import XCTest | COMMENT |
| LOW | Tests/ComposerHarness/Tests/HarnessRedoCaretTests.swift | 21 | /// the engine text view through lldb — the calls the keyboard, a tap and shake/⌘Z make. Legacy | COMMENT |
| LOW | …serHarness/Tests/HarnessLocalMoveSourceJoinTests.swift | 1 | import XCTest | COMMENT |
| LOW | …serHarness/Tests/HarnessLocalMoveSourceJoinTests.swift | 21 | /// "dden body." as two paragraphs where cut+paste joins them. | COMMENT |
| LOW | …sts/HarnessLegacyBlockFormatUndoAfterTypingTests.swift | 1 | import XCTest | COMMENT |
| LOW | …sts/HarnessLegacyBlockFormatUndoAfterTypingTests.swift | 21 | /// | COMMENT |
| LOW | …erHarness/Tests/HarnessCaptionFragmentPasteTests.swift | 1 | import XCTest | COMMENT |
| LOW | …erHarness/Tests/HarnessCaptionFragmentPasteTests.swift | 21 | /// vanishes (Undo restores it). | COMMENT |
| LOW | …/HarnessLegacyQuoteBackspaceAtDocumentStartTests.swift | 1 | import XCTest | COMMENT |
| LOW | …rness/Tests/HarnessCancelledCompositionUndoTests.swift | 1 | import XCTest | COMMENT |
| LOW | …rness/Tests/HarnessCancelledCompositionUndoTests.swift | 21 | /// whose undo changed nothing. | COMMENT |
| LOW | …Harness/Tests/HarnessAdjacentCustomEmojiRunTests.swift | 1 | import XCTest | COMMENT |
| LOW | …mposerHarness/Tests/HarnessCodeLanguageRedoTests.swift | 1 | import XCTest | COMMENT |
| 12888 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| CRITICAL | docs/superpowers/postbox-refactor-log.md | 252 | - `postbox.transaction { transaction.getPeer / transaction.getPeerCachedData as? CachedGroupData / CachedChannelData; Fo | CODE |
| CRITICAL | docs/superpowers/postbox-refactor-log.md | 480 | No consumer migrations this wave. Known consumers (≥25 call sites across ~15 modules: AvatarVideoNode, DrawingUI, Settin | CODE |
| CRITICAL | docs/superpowers/postbox-refactor-log.md | 490 | Consumer sweep for the wave-19 `shortLivedResourceCachePathPrefix` facade. 22 call sites across 16 modules migrated atom | CODE |
| CRITICAL | submodules/PremiumUI/Sources/GiftOptionItem.swift | 574 | backgroundNode.image = generateStretchableFilledCircleImage(radius: 13.0, color: item.presen | CODE |
| CRITICAL | submodules/PremiumUI/Sources/GiftOptionItem.swift | 601 | backgroundNode.image = generateStretchableFilledCircleImage(radius: 13.0, color: item.presen | CODE |
| CRITICAL | …dules/PremiumUI/Sources/CreateGiveawayFooterItem.swift | 103 | pressedColor: self.item.theme.list.itemCheckColors.fillColor.withMultipliedAlpha(0.9) | CODE |
| CRITICAL | submodules/PremiumUI/Sources/PremiumDemoScreen.swift | 532 | if self.context.sharedContext.immediateExperimentalUISettings.enableReactionOverrides, let value = self.cont | CODE |
| CRITICAL | submodules/PremiumUI/Sources/PremiumDemoScreen.swift | 543 | if self.context.sharedContext.immediateExperimentalUISettings.enableReactionOverrides, let value = self.cont | CODE |
| CRITICAL | …dules/PremiumUI/Sources/PremiumBoostLevelsScreen.swift | 883 | EngineDataMap(peerIds.map(TelegramEngine.EngineData.Item.Peer.Peer.init(id:))) | CODE |
| CRITICAL | …es/Terms of Service/TermsOfServiceControllerNode.swift | 122 | self.contentTextNode.linkHighlightColor = self.presentationData.theme.list.itemAccentColor.withAlphaComponent(0. | CODE |
| CRITICAL | …ces/Data and Storage/KeepMediaDurationPickerItem.swift | 146 | sliderView.backColor = item.theme.list.itemSwitchColors.frameColor.blitOver(item.theme.list.itemBlocksBackgr | CODE |
| CRITICAL | …ces/Data and Storage/KeepMediaDurationPickerItem.swift | 147 | sliderView.startColor = item.theme.list.itemSwitchColors.frameColor.blitOver(item.theme.list.itemBlocksBackg | CODE |
| CRITICAL | …ata and Storage/DataAndStorageSettingsController.swift | 927 | peerIds.map(TelegramEngine.EngineData.Item.Peer.Peer.init(id:)) | CODE |
| CRITICAL | …ces/Data and Storage/SaveIncomingMediaController.swift | 647 | peerIds.map(TelegramEngine.EngineData.Item.Peer.Peer.init(id:)) | CODE |
| CRITICAL | …ingsUI/Sources/Themes/ThemePreviewControllerNode.swift | 270 | let statusSignal = strongSelf.context.sharedContext.accountManager.resources.status(resource: EngineMedi | CODE |
| CRITICAL | …Sources/Privacy and Security/RecentSessionScreen.swift | 127 | EngineDataMap(additionalPeerIds.map(TelegramEngine.EngineData.Item.Peer.Peer.init(id:))), | CODE |
| CRITICAL | …Sources/Privacy and Security/RecentSessionScreen.swift | 128 | EngineDataMap(additionalPeerIds.map(TelegramEngine.EngineData.Item.Peer.IsContact.init(id:))) | CODE |
| CRITICAL | …Sources/Privacy and Security/RecentSessionScreen.swift | 1128 | pressedColor: environment.theme.list.itemCheckColors.fillColor.withMultipliedAlpha(0 | CODE |
| CRITICAL | …ecurity/Recent Sessions/RecentSessionsHeaderItem.swift | 177 | pressedColor: item.theme.list.itemCheckColors.fillColor.withMultipliedAlpha(0.9) | CODE |
| CRITICAL | …/Notifications/NotificationsCategoryItemListItem.swift | 395 | shimmerNode.update(backgroundColor: item.presentationData.theme.list.itemBlocksBackgroundColor, | CODE |
| CRITICAL | …ramUniversalVideoContent/Sources/HLSVideoContent.swift | 498 | resourceId: file.media.resource.id.stringRepresentation.data(using: .utf8)!, | CODE |
| CRITICAL | …VideoContent/Sources/HLSVideoJSNativeContentNode.swift | 267 | resourceId: file.media.resource.id.stringRepresentation.data(using: .utf8)!, | CODE |
| CRITICAL | …lVideoContent/Sources/YoutubeEmbedImplementation.swift | 648 | self.context.sharedContext.mediaManager.universalVideoManager.withUniversalVideoContent(id: content.id) { [weak | CODE |
| CRITICAL | …ules/ItemListVenueItem/Sources/ItemListVenueItem.swift | 436 | shimmerNode.update(backgroundColor: placeholderBackgroundColor, foregroundColor: item.presentati | CODE |
| CRITICAL | …/InstantPageUI/Sources/InstantPageControllerNode.swift | 432 | let widthUpdated = !self.scrollNode.bounds.size.width.isEqual(to: layout.size.width) | CODE |
| CRITICAL | …/InstantPageUI/Sources/InstantPageControllerNode.swift | 435 | if self.scrollNode.bounds.size != layout.size || !self.scrollNode.view.contentInset.top.isEqual(to: scrollInsetT | CODE |
| CRITICAL | …entationData/Sources/DefaultDayPresentationTheme.swift | 269 | withWallpaper: chat.message.incoming.bubble.withWallpaper.withUpdated( | CODE |
| CRITICAL | …entationData/Sources/DefaultDayPresentationTheme.swift | 278 | withoutWallpaper: chat.message.incoming.bubble.withoutWallpaper.withUpdated( | CODE |
| CRITICAL | …entationData/Sources/DefaultDayPresentationTheme.swift | 306 | withWallpaper: chat.message.outgoing.bubble.withWallpaper.withUpdated( | CODE |
| CRITICAL | …entationData/Sources/DefaultDayPresentationTheme.swift | 317 | withoutWallpaper: chat.message.outgoing.bubble.withoutWallpaper.withUpdated( | CODE |
| CRITICAL | …nData/Sources/DefaultDarkTintedPresentationTheme.swift | 311 | withWallpaper: chat.message.outgoing.bubble.withWallpaper.withUpdated( | CODE |
| CRITICAL | …nData/Sources/DefaultDarkTintedPresentationTheme.swift | 322 | withoutWallpaper: chat.message.outgoing.bubble.withoutWallpaper.withUpdated( | CODE |
| CRITICAL | …nData/Sources/DefaultDarkTintedPresentationTheme.swift | 364 | withWallpaper: chat.message.outgoing.bubble.withWallpaper.withUpdated( | CODE |
| CRITICAL | …nData/Sources/DefaultDarkTintedPresentationTheme.swift | 369 | withoutWallpaper: chat.message.outgoing.bubble.withoutWallpaper.withUpdated( | CODE |
| CRITICAL | …ntationData/Sources/DefaultDarkPresentationTheme.swift | 193 | withWallpaper: chat.message.incoming.bubble.withWallpaper.withUpdated( | CODE |
| CRITICAL | …ntationData/Sources/DefaultDarkPresentationTheme.swift | 201 | withoutWallpaper: chat.message.incoming.bubble.withoutWallpaper.withUpdated( | CODE |
| CRITICAL | …ntationData/Sources/DefaultDarkPresentationTheme.swift | 234 | withWallpaper: chat.message.outgoing.bubble.withWallpaper.withUpdated( | CODE |
| CRITICAL | …ntationData/Sources/DefaultDarkPresentationTheme.swift | 245 | withoutWallpaper: chat.message.outgoing.bubble.withoutWallpaper.withUpdated( | CODE |
| CRITICAL | …Data/Sources/Resources/PresentationResourcesChat.swift | 146 | return generateTintedImage(image: UIImage(bundleImageName: "Chat/Message/HeaderArrow"), color: theme.chat.me | CODE |
| CRITICAL | …Data/Sources/Resources/PresentationResourcesChat.swift | 152 | return generateTintedImage(image: UIImage(bundleImageName: "Chat/Message/HeaderArrow"), color: theme.chat.me | CODE |
| CRITICAL | …Data/Sources/Resources/PresentationResourcesChat.swift | 1394 | context.setStrokeColor(theme.chat.message.incoming.secondaryTextColor.withAlphaComponent(1.0).cgColor) | CODE |
| CRITICAL | …stMessageItem/Sources/ListMessageSnippetItemNode.swift | 492 | if item.presentationData.theme.theme.list.itemAccentColor.isEqual(item.presentat | CODE |
| CRITICAL | …stMessageItem/Sources/ListMessageSnippetItemNode.swift | 567 | if item.presentationData.theme.theme.list.itemAccentColor.isEqual(item.presentat | CODE |
| CRITICAL | …/ListMessageItem/Sources/ListMessageFileItemNode.swift | 1181 | strongSelf.restrictionNode.backgroundColor = item.presentationData.theme.theme.list.itemBlocksBa | CODE |
| CRITICAL | …/ListMessageItem/Sources/ListMessageFileItemNode.swift | 1426 | shimmerNode.update(backgroundColor: item.presentationData.theme.theme.list.itemBlocksBackgroundC | CODE |
| CRITICAL | …ntactListUI/Sources/InviteContactsCountPanelNode.swift | 69 | pressedColor: self.theme.list.itemCheckColors.fillColor.withMultipliedAlpha(0.9) | CODE |
| CRITICAL | submodules/ContactListUI/Sources/ContactListNode.swift | 1109 | peerIds.map(TelegramEngine.EngineData.Item.Peer.IsPremiumRequiredForMessaging.init(id:)) | CODE |
| CRITICAL | submodules/ContactListUI/Sources/ContactListNode.swift | 1131 | peerIds.map(TelegramEngine.EngineData.Item.Peer.StoryStats.init(id:)) | CODE |
| CRITICAL | submodules/ContactListUI/Sources/ContactListNode.swift | 1585 | peerIds.map(TelegramEngine.EngineData.Item.Peer.IsPremiumRequiredForMessaging.init(i | CODE |
| CRITICAL | submodules/ContactListUI/Sources/ContactListNode.swift | 1878 | context.engine.data.get(EngineDataMap(peerIds.map(TelegramEngine.EngineData.Item.Peer.Peer.init( | CODE |
| CRITICAL | …ontactListUI/Sources/ContactsSearchContainerNode.swift | 425 | peerIds.map(TelegramEngine.EngineData.Item.Peer.IsPremiumRequiredForMessaging.init(id:)) | CODE |
| CRITICAL | …eactionSelectionNode/Sources/ReactionContextNode.swift | 739 | separatorColor: strongSelf.presentationData.theme.list.itemPlainSeparatorColor.withMultiplie | CODE |
| CRITICAL | …eactionSelectionNode/Sources/ReactionContextNode.swift | 1434 | separatorColor: self.presentationData.theme.list.itemPlainSeparatorColor.withMultipliedAlpha(0.5 | CODE |
| CRITICAL | …ctionSelectionNode/Sources/ReactionSelectionNode.swift | 518 | if let image = generateStickerPlaceholderImage(data: immediateThumbnailData, size: animationDisplayS | CODE |
| CRITICAL | …utPanelNode/Sources/AttachmentTextInputPanelNode.swift | 527 | return EmojiTextAttachmentView(context: context, userLocation: .other, emoji: emoji, file: emoji.file, cache | CODE |
| CRITICAL | …utPanelNode/Sources/AttachmentTextInputPanelNode.swift | 536 | return self.context.engine.data.get(TelegramEngine.EngineData.Item.Configuration.UserLimits.init(isP | CODE |
| CRITICAL | …odules/ContactsPeerItem/Sources/ContactsPeerItem.swift | 766 | transition.updateTintColor(layer: avatarBadgeBackground.layer, color: item.presentationData.theme.list.itemH | CODE |
| CRITICAL | …odules/ContactsPeerItem/Sources/ContactsPeerItem.swift | 772 | transition.updateTintColor(layer: avatarBadgeBackground.layer, color: item.presentationData.theme.list.itemH | CODE |
| CRITICAL | …odules/ContactsPeerItem/Sources/ContactsPeerItem.swift | 1187 | let titleBadgeLayoutAndApplyValue = titleBadgeLayout(TextNodeLayoutArguments(attributedString: NSAttribu | CODE |
| CRITICAL | …odules/ContactsPeerItem/Sources/ContactsPeerItem.swift | 1466 | avatarBadgeBackground.tintColor = item.presentationData.theme.list.itemHighlightedBa | CODE |
| 379 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | …ces/FFMpeg/ffmpeg-8.1.2/tools/python/tf_sess_config.py | 18 | # ============================================================================== | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/vtr/CMakeLists.txt | 8 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/vtr/CMakeLists.txt | 10 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/vtr/CMakeLists.txt | 60 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/vtr/CMakeLists.txt | 73 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/sdc/CMakeLists.txt | 8 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/sdc/CMakeLists.txt | 21 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/sdc/CMakeLists.txt | 47 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/far/CMakeLists.txt | 8 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/far/CMakeLists.txt | 60 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/far/CMakeLists.txt | 78 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …anionRenderer/ThirdParty/opensubdiv/far/CMakeLists.txt | 91 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …/TelegramUI/Components/RichTextEditor/Host/project.yml | 1 | # ============================================================================================== | COMMENT |
| MEDIUM | …/TelegramUI/Components/RichTextEditor/Host/project.yml | 19 | # ============================================================================================== | COMMENT |
| MEDIUM | …tor/Host/Engine/Scripts/test-export-behavior-kernel.sh | 59 | # --------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …tor/Host/Engine/Scripts/test-export-behavior-kernel.sh | 61 | # --------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …xtEditor/Host/Engine/Scripts/export-behavior-kernel.sh | 13 | # --------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …xtEditor/Host/Engine/Scripts/export-behavior-kernel.sh | 55 | # --------------------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | …s/InputBackend/Routers/FloatingCursorRouterTests.swift | 320 | /// └─────────────────────────────────────────────────────────────────────────────────────────────── | COMMENT |
| MEDIUM | …s/SourceBoundary/InputBackendSourceBoundaryTests.swift | 2865 | // └──────────────────────────────────────────────────────────────────────────────────────── | STRING |
| MEDIUM | …ponents/RichTextEditor/Scripts/ph4b-isolation-sweep.sh | 2 | # ============================================================================================== | COMMENT |
| MEDIUM | …ponents/RichTextEditor/Scripts/ph4b-isolation-sweep.sh | 42 | # ============================================================================================== | COMMENT |
| MEDIUM | …elegramUI/Components/RichTextEditor/Scripts/hostapp.sh | 2 | # ============================================================================================== | COMMENT |
| MEDIUM | …elegramUI/Components/RichTextEditor/Scripts/hostapp.sh | 37 | # ============================================================================================== | COMMENT |
| MEDIUM | …torUIKit/InputBackend/LegacyRichTextInputBackend.swift | 351 | // │ they must come to, because Swift extensions cannot declare stored properties. ──────────────── | COMMENT |
| MEDIUM | …torUIKit/InputBackend/LegacyRichTextInputBackend.swift | 381 | // └─────────────────────────────────────────────────────────────────────────────────────────────── | COMMENT |
| MEDIUM | …utBackend/LegacyRichTextInputBackend+Interaction.swift | 91 | /// ┌─ **FIX ROUND 2 (re-review NF2). THE PARENTHETICAL IS THE FINDING, NOT THE NUMBER.** ─────────────── | COMMENT |
| MEDIUM | …utBackend/LegacyRichTextInputBackend+Interaction.swift | 108 | /// └─────────────────────────────────────────────────────────────────────────────────────────────────── Two consequence | COMMENT |
| MEDIUM | …utBackend/LegacyRichTextInputBackend+Interaction.swift | 164 | /// ┌─ **FIX ROUND 1 (review Major 1). THE ROOT CAUSE IS REUSABLE AND IS THE POINT OF THIS BOX.** ────── | COMMENT |
| MEDIUM | …utBackend/LegacyRichTextInputBackend+Interaction.swift | 195 | /// └─────────────────────────────────────────────────────────────────────────────────────────────────── | COMMENT |
| MEDIUM | …utBackend/LegacyRichTextInputBackend+Interaction.swift | 288 | /// │ A COUNT; IT NO LONGER DOES, AND THAT DELETION IS THE LESSON.** ────────────────────────────── | COMMENT |
| MEDIUM | …utBackend/LegacyRichTextInputBackend+Interaction.swift | 334 | /// └────────────────────────────────────────────────────────────────────────────────────────────── | COMMENT |
| MEDIUM | …utBackend/LegacyRichTextInputBackend+Unwitnessed.swift | 211 | // ───────────────────────────────────────────────────────────────────────────────────────────── | COMMENT |
| MEDIUM | …utBackend/LegacyRichTextInputBackend+Unwitnessed.swift | 218 | // ───────────────────────────────────────────────────────────────────────────────────────────── | COMMENT |
| MEDIUM | …utBackend/LegacyRichTextInputBackend+Unwitnessed.swift | 330 | // ─────────────────────────── end of the Phase-4 inventory ledger ─────────────────────────── | COMMENT |
| MEDIUM | …ation/Animations/CAAnimation+TimingConfiguration.swift | 16 | // ┌──────────────────────────────────┐ | COMMENT |
| MEDIUM | …ation/Animations/CAAnimation+TimingConfiguration.swift | 18 | // └──────────────────────────────────┘ | COMMENT |
| MEDIUM⚡ | …ation/Animations/CAAnimation+TimingConfiguration.swift | 30 | // ┌────────────────────┬───────► | COMMENT |
| MEDIUM⚡ | …ation/Animations/CAAnimation+TimingConfiguration.swift | 32 | // └────────────────────┴───────► | COMMENT |
| MEDIUM⚡ | …ation/Animations/CAAnimation+TimingConfiguration.swift | 34 | // ┌──────────────────────────────────┐ | COMMENT |
| MEDIUM⚡ | …ation/Animations/CAAnimation+TimingConfiguration.swift | 36 | // └──────────────────────────────────┘ | COMMENT |
| MEDIUM | …party/libjxl/libjxl/third_party/highway/CMakeLists.txt | 390 | # -------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | …y/libjxl/libjxl/third_party/brotli/csharp/transpile.sh | 25 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | …y/libjxl/libjxl/third_party/brotli/csharp/transpile.sh | 33 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | …y/libjxl/libjxl/third_party/brotli/csharp/transpile.sh | 42 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | …y/libjxl/libjxl/third_party/brotli/csharp/transpile.sh | 49 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | …y/libjxl/libjxl/third_party/brotli/csharp/transpile.sh | 64 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | …y/libjxl/libjxl/third_party/brotli/csharp/transpile.sh | 73 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | …y/libjxl/libjxl/third_party/brotli/csharp/transpile.sh | 83 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM⚡ | …y/libjxl/libjxl/third_party/brotli/csharp/transpile.sh | 90 | #------------------------------------------------------------------------------- | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 1 | # ---------------------------------- | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 3 | # ---------------------------------- | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 19 | # ----------------------------- | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 21 | # ----------------------------- | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 117 | # ------------------------------------------------ | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 119 | # ------------------------------------------------ | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 161 | # ---------------------------- | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 163 | # ---------------------------- | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 218 | # ------------------------------- | COMMENT |
| MEDIUM | third-party/webp/libwebp/.cmake-format.py | 220 | # ------------------------------- | COMMENT |
| 74 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | submodules/BrowserUI/Sources/BrowserWebContent.swift | 1928 | function tgBrowserDisableWebkitEnterFullscreen(videoElement) { | CODE |
| LOW | submodules/BrowserUI/Sources/BrowserWebContent.swift | 1934 | function tgBrowserDisableFullscreenOnExistingVideos() { | CODE |
| LOW | submodules/BrowserUI/Sources/BrowserWebContent.swift | 1962 | function tgBrowserDisconnectObserver() { | CODE |
| LOW | submodules/BrowserUI/Sources/BrowserWebContent.swift | 1971 | function saveOriginalCssProperties(element) { | CODE |
| LOW | submodules/BrowserUI/Sources/BrowserWebContent.swift | 2004 | function clearOriginalCssProperties(element) { | CODE |
| LOW | submodules/WebUI/Sources/WebAppWebView.swift | 80 | function tgBrowserDisableWebkitEnterFullscreen(videoElement) { | CODE |
| LOW | submodules/WebUI/Sources/WebAppWebView.swift | 86 | function tgBrowserDisableFullscreenOnExistingVideos() { | CODE |
| LOW | submodules/WebUI/Sources/WebAppWebView.swift | 114 | function tgBrowserDisconnectObserver() { | CODE |
| LOW | …ules/TelegramUI/Resources/WebEmbed/HLSVideoPlayer.html | 123 | function playerRequestPictureInPicture() { | CODE |
| LOW | …ules/TelegramUI/Resources/WebEmbed/HLSVideoPlayer.html | 132 | function playerStopPictureInPicture() { | CODE |
| LOW | …st/Engine/Scripts/compare-inline-prediction-results.py | 95 | def compare_exported_directories( | CODE |
| LOW | …or/Host/Engine/Scripts/text_input_keyboard_snapshot.py | 241 | def _verify_snapshot_contents(snapshot, expected_identity): | CODE |
| LOW | …Editor/Host/Engine/Scripts/text_input_live_boundary.py | 100 | def _require_clean_post_state(post_state, provisioning): | CODE |
| LOW | …Editor/Host/Engine/Scripts/text_input_live_boundary.py | 142 | def _validate_restore_summary(summary, expected_identity): | CODE |
| LOW | …Editor/Host/Engine/Scripts/text_input_live_boundary.py | 166 | def _snapshot_keyboard_preferences_xml(keyboard_snapshot): | CODE |
| LOW | …ine/Scripts/validate-text-input-scenario-provenance.py | 37 | def replay_terminal_canonical(scenario): | CODE |
| LOW | …ine/Scripts/validate-text-input-scenario-provenance.py | 248 | def normalized_evidence_canonical(family, identifier, canonical): | CODE |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 245 | def completed_observation_indexes(self): | CODE |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 422 | def observation_event_from_dict(value): | CODE |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 440 | def observation_restore_response_dict(response): | CODE |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 457 | def _validate_group_and_sequence(token, group_id, sequence_index): | CODE |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 465 | def _validate_batch_for_group(batch_id, group_id, label): | CODE |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 739 | def write_observation_restore_response(path, response): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 79 | def _matches_exported_attachment_name(name, stem, extension): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 90 | def _is_reset_induced_testmanager_crash(export_root, attachment): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 377 | def _snapshot_group_is_resumable(directory, group): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 650 | def _valid_group_xcresult_summary(path): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 680 | def _valid_exported_group_metadata(export_root, group, token_hash): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 708 | def _materialized_batch_is_valid(directory, batch): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1006 | def _canonicalize_authority_marked_range(status): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1324 | def materialize_batched_authority(root): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1388 | def materialize_fresh_authority(root): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1676 | def _expected_test_identifier(subsystem): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1713 | def _validated_checkpoint_package(package, expected): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1782 | def _validated_snapshot_checkpoints(checkpoints, group, require_complete): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1802 | def snapshot_observation_resume_indexes(checkpoints, group): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1809 | def _validated_observation_attempt_map(export_root, attachments, group, | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 2072 | def _validated_group_boundaries(group, boundaries, token_sha256): | CODE |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 2170 | def _materialize_snapshot_attempt_evidence(export_root, partition, | CODE |
| LOW | …Host/Engine/Scripts/compare-ime-composition-results.py | 115 | def validate_stable_identities(host, phases): | CODE |
| LOW | …extEditor/Host/Engine/Scripts/ime_keyboard_contract.py | 134 | def validate_simulator_metadata(contract, metadata): | CODE |
| LOW | …itor/Host/Engine/Scripts/verification_stabilization.py | 152 | def _validate_preflight_metadata(value): | CODE |
| LOW | …itor/Host/Engine/Scripts/verification_stabilization.py | 173 | def _normalize_preflight_metadata(value): | CODE |
| LOW | …xtEditor/Host/Engine/Scripts/generate-contract-data.py | 67 | def remaining_upstream_classes(node, found): | STRING |
| LOW | …/Host/Engine/Scripts/compare-autocorrection-results.py | 96 | def compare_exported_directories( | CODE |
| LOW | …/tests/test_validate_text_input_scenario_provenance.py | 59 | def _write_attachment_evidence( | CODE |
| LOW | …/tests/test_validate_text_input_scenario_provenance.py | 175 | def test_rejects_missing_scenario_identifier(self): | CODE |
| LOW | …/tests/test_validate_text_input_scenario_provenance.py | 187 | def test_rejects_terminal_canonical_mismatch(self): | CODE |
| LOW | …/tests/test_validate_text_input_scenario_provenance.py | 198 | def test_accepts_matching_controlled_evidence(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 202 | def test_snapshot_row_observation_plan_has_eight_physical_hosts(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 238 | def test_snapshot_row_rejects_legacy_and_noncanonical_inventory(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 282 | def test_observation_state_completes_and_retries_only_current_host(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 321 | def test_observation_state_rejects_phase_attempt_and_identity_drift(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 354 | def test_observation_state_rejects_attempt_twenty_one(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 373 | def test_observation_event_and_restore_response_schema_three_round_trip(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 407 | def test_observation_cli_persists_state_and_writes_restore_response(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 467 | def test_plan_interleaves_host_row_and_pass_boundaries_in_one_sequence(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 514 | def test_plan_uses_host_boundaries_for_single_state_sensitive_rows_only(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 526 | def test_builds_and_loads_exact_host_row_and_pass_requests(self): | CODE |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 553 | def test_rejects_missing_extra_wrong_types_and_invalid_scalars(self): | CODE |
| 292 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | tools/animation_sheet.py | 170 | # The window's median change, without the frame itself: robust to the recorder's near-copies. | COMMENT |
| MEDIUM | …poserHarness/Tools/uninstall_harness_from_test_sims.sh | 2 | # pre_action of the harness test runners. The runners reuse one "BAZEL_TEST_<device>_<os>" simulator | COMMENT |
| MEDIUM | …poserHarness/Tools/uninstall_harness_from_test_sims.sh | 4 | # unchanged — the harness is always CFBundleVersion 1 — so without this a run can silently test the | COMMENT |
| LOW | …urces/FFMpeg/ffmpeg-8.1.2/tools/indent_arm_assembly.pl | 101 | # don't try to realign the line at all, just return the input | COMMENT |
| LOW | …urces/FFMpeg/ffmpeg-8.1.2/tools/indent_arm_assembly.pl | 194 | # Not enough space for the label; just add a space between the label | COMMENT |
| MEDIUM | …fmpeg/Sources/FFMpeg/ffmpeg-8.1.2/libavformat/movenc.c | 729 | // in the case of fragmented MP4, utilize the following values as | COMMENT |
| MEDIUM | …fmpeg/Sources/FFMpeg/ffmpeg-8.1.2/libavformat/movenc.c | 749 | // utilize values from properties if we have them available | COMMENT |
| MEDIUM | …eg/Sources/FFMpeg/ffmpeg-8.1.2/libavformat/mpegtsenc.c | 332 | // Here we utilize a pre-defined set of values defined in ARIB TR-B14, | COMMENT |
| LOW | …peg/Sources/FFMpeg/ffmpeg-8.1.2/libavformat/avformat.h | 1421 | #define AVFMT_FLAG_NOFILLIN 0x0010 ///< Do not infer any values from other values, just return what is stored in the | COMMENT |
| MEDIUM | …/ffmpeg/Sources/FFMpeg/ffmpeg-8.1.2/libavcodec/mfenc.c | 187 | // (Certainly any lossy codec will have frames much smaller than 1 second.) | COMMENT |
| MEDIUM | …mpeg/Sources/FFMpeg/ffmpeg-8.1.2/libavcodec/cbs_jpeg.c | 97 | // Definitely too short to be meaningful. | COMMENT |
| MEDIUM | …eg/Sources/FFMpeg/ffmpeg-8.1.2/libavcodec/aac/aacdec.c | 408 | // For everything else, utilize the AV channel position define as a | COMMENT |
| MEDIUM | …ionRenderer/ThirdParty/opensubdiv/far/primvarRefiner.h | 443 | // Essentially copy the parent vertex: | COMMENT |
| MEDIUM | submodules/LegacyComponents/Sources/FLAnimatedImage.m | 172 | // Note: We could leverage `CGImageSourceCreateWithURL` too to add a second initializer `-initWithAnimatedGIFCon | COMMENT |
| MEDIUM | …/TelegramUI/Components/RichTextEditor/Host/project.yml | 26 | # 18.4 — so the class is gated at its highest requirement, and this harness must be able to see | COMMENT |
| MEDIUM | …extEditorUIKitTests/BlockViewVirtualizationTests.swift | 109 | // Target a mid-document box by its actual frame (robust to inter-block spacing) rather than a | COMMENT |
| MEDIUM | …ponents/RichTextEditor/Scripts/ph4b-isolation-sweep.sh | 40 | # result is a measurement rather than a blind harness. Full reasoning in | COMMENT |
| MEDIUM | …TelegramUI/Components/RichTextEditor/Scripts/matrix.sh | 134 | # calling harness enforces a wall-clock cap per call — e.g. `ENGINES=tk2 Scripts/matrix.sh` then | COMMENT |
| MEDIUM | …es/RichTextEditorUIKit/Canvas/DocumentCanvasView.swift | 2173 | /// `probe.frame` before seeding). The robust fix (deferred) is to make the measure framing-independent — | COMMENT |
| MEDIUM | …ate/CoreAnimation/Animations/TransformAnimations.swift | 152 | // in surprising ways that don't happen at runtime. Definitely not ideal. | STRING |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 397 | # Sed substitution that helps us do robust quoting. It backslashifies | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 3852 | # Sed substitution that helps us do robust quoting. It backslashifies | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 7676 | # This code stresses the "libraries are programs" paradigm to its | COMMENT |
| MEDIUM | …rd-party/libjxl/libjxl/third_party/lcms/src/cmsxform.c | 279 | // Certainly, out of gamut | COMMENT |
| MEDIUM | …/libjxl/libjxl/third_party/highway/hwy/nanobenchmark.h | 20 | // prediction hit rates. Uses a robust estimator to summarize the measurements. | COMMENT |
| MEDIUM | …/libjxl/libjxl/third_party/highway/hwy/nanobenchmark.h | 46 | // which is more robust to outliers and skewed data than the mean or median. | COMMENT |
| MEDIUM | …jxl/libjxl/third_party/highway/hwy/robust_statistics.h | 82 | // Half Sample Mode estimator proposed by Bickel in "On a fast, robust | COMMENT |
| MEDIUM | …jxl/libjxl/third_party/highway/hwy/robust_statistics.h | 130 | // Returns a robust measure of variability. | COMMENT |
| MEDIUM | …y/td/TdBinding/SharedHeaders/td/tde2e/td/e2e/e2e_api.h | 241 | // we always have public key. Essentially contact is defined by its public key | COMMENT |
| MEDIUM | …/TdBinding/SharedHeaders/td/tdutils/td/utils/Closure.h | 17 | // Essentially we have: | COMMENT |
| MEDIUM | third-party/mozjpeg/mozjpeg/jpegint.h | 107 | int num_scans_luma; /* # of entries in scan_info array pertaining to luma (used when optimize_scans is TRUE */ | CODE |
| MEDIUM | …ird-party/boringssl/src/crypto/perlasm/x86_64-xlate.pl | 1820 | # To facilitate composing of .pdata structures, auto-generated "gear" | COMMENT |
| MEDIUM | …gssl/src/crypto/fipsmodule/sha/asm/sha1-armv4-large.pl | 700 | # this fix-up provides Thumb encoding in conjunction with INST | COMMENT |
| MEDIUM⚡ | …boringssl/src/crypto/fipsmodule/sha/asm/sha1-x86_64.pl | 25 | # capacity to fully utilize SHA-1 parallelism. Therefore this fresh | COMMENT |
| MEDIUM | third-party/boringssl/src/include/openssl/ssl.h | 4139 | // reports the correct alert to the client and is more robust in case of | COMMENT |
| MEDIUM | third-party/webrtc/absl/absl/debugging/stacktrace.h | 27 | // Note: stack traces in Abseil that do not utilize a symbolizer will result in | COMMENT |
| MEDIUM | third-party/webrtc/absl/absl/log/scoped_mock_log.h | 57 | // // Simple robust setup, ignores unexpected logs. | COMMENT |
| MEDIUM | third-party/webrtc/absl/absl/log/check.h | 29 | // compromise. It is also more robust and portable to deliberately terminate | COMMENT |
| MEDIUM | third-party/webrtc/absl/absl/log/absl_check.h | 27 | // compromise. It is also more robust and portable to deliberately terminate | COMMENT |
| MEDIUM | …party/webrtc/absl/absl/random/bernoulli_distribution.h | 159 | // greater than or equal to 1, the same would be true for `p`. Certainly `p` | COMMENT |
| MEDIUM | …party/webrtc/absl/absl/random/internal/nanobenchmark.h | 19 | // prediction hit rates. Uses a robust estimator to summarize the measurements. | COMMENT |
| MEDIUM | …party/webrtc/absl/absl/random/internal/nanobenchmark.h | 45 | // which is more robust to outliers and skewed data than the mean or median. | COMMENT |
| MEDIUM | third-party/webrtc/absl/absl/base/options.h | 39 | // Diamond dependency problems can be avoided if all packages utilize the same | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | …ces/FFMpeg/ffmpeg-8.1.2/tools/python/tf_sess_config.py | 3 | # This file is part of FFmpeg. | COMMENT |
| MEDIUM | …rces/FFMpeg/ffmpeg-8.1.2/compat/solaris/make_sunver.pl | 8 | # This file is free software; you can redistribute it and/or modify it | COMMENT |
| MEDIUM | …les/ffmpeg/Sources/FFMpeg/ffmpeg-8.1.2/doc/texi2pod.pl | 5 | # This file is part of GNU CC. | COMMENT |
| MEDIUM | …bmodules/ffmpeg/Sources/FFMpeg/ffmpeg-8.1.2/doc/t2h.pm | 7 | # This file is part of FFmpeg. | COMMENT |
| MEDIUM | …ird-party/libjxl/libjxl/tools/scripts/build_cleaner.py | 27 | # This file is generated, do not modify by manually. | COMMENT |
| MEDIUM | …ird-party/libjxl/libjxl/tools/conformance/generator.py | 89 | # Create the test descriptor file. | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 1229 | # This function is only a basic sanity check; it will hardly flush out | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 1240 | # This function implements the same check as func_lalib_p without | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 1263 | # This function is only a basic sanity check; it will hardly flush out | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 1272 | # This function is only a basic sanity check; it will hardly flush out | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 1297 | # This function is only a basic sanity check; it will hardly flush out | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 1433 | # Create a libtool object file (analogous to a ".la" file), | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 6029 | # Create the object directory. | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 8651 | # Create the old-style object. | COMMENT |
| MEDIUM | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 8671 | # Create an invalid libtool object if no PIC, so that we don't | COMMENT |
| MEDIUM | …ty/libjxl/libjxl/third_party/skcms/infra/bots/bazel.py | 32 | # Create a temporary directory for the Bazel cache. | COMMENT |
| MEDIUM | third-party/webp/libwebp/xcframeworkbuild.sh | 215 | # Create a temporary target directory for each <platform>[-<variant>]. | COMMENT |
| MEDIUM | third-party/webp/libwebp/infra/compile_android.sh | 116 | # Create a fresh build directory | COMMENT |
| MEDIUM | third-party/webp/libwebp/swig/libwebp.py | 233 | # This file is compatible with both classic and new-style classes. | COMMENT |
| MEDIUM | third-party/libvpx/build-libvpx-bazel.sh | 112 | # Create a vpx_config.h shim that, based on preprocessor settings for the | COMMENT |
| MEDIUM | third-party/libvpx/build-libvpx-bazel.sh | 192 | # Create the vpx_config.h shim that allows usage of vpx_config.h from | COMMENT |
| MEDIUM | …arty/boringssl/src/crypto/test/asm/trampoline-armv4.pl | 16 | # This file defines helper functions for crypto/test/abi_test.h on 32-bit | COMMENT |
| MEDIUM | …arty/boringssl/src/crypto/test/asm/trampoline-armv8.pl | 16 | # This file defines helper functions for crypto/test/abi_test.h on aarch64. See | COMMENT |
| MEDIUM | …rty/boringssl/src/crypto/test/asm/trampoline-x86_64.pl | 16 | # This file defines helper functions for crypto/test/abi_test.h on x86_64. See | COMMENT |
| MEDIUM | …-party/boringssl/src/crypto/test/asm/trampoline-x86.pl | 16 | # This file defines helper functions for crypto/test/abi_test.h on x86. See | COMMENT |
| MEDIUM | …crypto/fipsmodule/ec/make_ec_scalar_base_mult_tests.go | 52 | fmt.Printf(`# This file contains multiples of the base point for various curves. The point | CODE |
| MEDIUM | …crypto/fipsmodule/ec/make_ec_scalar_base_mult_tests.go | 55 | # This file is generated by make_ec_scalar_base_mult_tests.go | COMMENT |
| MEDIUM⚡ | …/boringssl/src/crypto/fipsmodule/aes/asm/aesv8-armx.pl | 17 | # This module implements support for ARMv8 AES instructions. The | COMMENT |
| MEDIUM⚡ | …oringssl/src/crypto/fipsmodule/aes/asm/aesni-x86_64.pl | 17 | # This module implements support for Intel AES-NI extension. In | COMMENT |
| MEDIUM⚡ | …y/boringssl/src/crypto/fipsmodule/aes/asm/aesni-x86.pl | 17 | # This module implements support for Intel AES-NI extension. In | COMMENT |
| MEDIUM | …dependencies/base/third_party/libevent/event_rpcgen.py | 1124 | # Create the right entry | COMMENT |
| MEDIUM | build-system/Make/TartBuild.py | 920 | # Create the VM | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | submodules/AsyncDisplayKit/Source/ASDisplayNode.mm | 1941 | // NOTE: This method must be dealloc-safe (should not retain self). | COMMENT |
| LOW | …tEngineEditor/RichTextEngineEditorView+Clipboard.swift | 426 | // Step 1: the raw text, undoing to the pre-paste document. | COMMENT |
| LOW | …tEngineEditor/RichTextEngineEditorView+Clipboard.swift | 438 | // Step 2: the parsed content over the same range, undoing to the raw text. | COMMENT |
| LOW | …rces/RichTextEditorUIKit/Canvas/BlockBackingView.swift | 30 | isUserInteractionEnabled = false // Step 1: pure passthrough; Step 2 enables an inner scroll view | CODE |
| LOW | …arty/brotli/scripts/dictionary/step-01-download-rfc.py | 1 | # Step 01 - download RFC7932. | COMMENT |
| LOW | …i/scripts/dictionary/step-04-generate-java-literals.py | 1 | # Step 04 - generate Java literals. | COMMENT |
| LOW | …_party/brotli/scripts/dictionary/step-02-rfc-to-bin.py | 1 | # Step 02 - parse RFC. | COMMENT |
| LOW | …arty/brotli/scripts/dictionary/step-03-validate-bin.py | 1 | # Step 03 - validate raw dictionary file. | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 96 | // Step 1: range reduction to [0, 2pi) | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 101 | // Step 2: range reduction to [0, pi] | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 103 | // Step 3: range reduction to [0, pi/2] | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 106 | // Step 4: Taylor-like approximation, scaled by 2**0.75 to make angle | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 114 | // Step 5: angle duplication. | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 118 | // Step 6: change sign if needed. | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 600 | // Step 2: Read trailing ones signs | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 606 | // Step 3: Read remaining levels | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 628 | // Step 4: Read total_zeros | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 637 | // Step 5: Read run_before for each coefficient and place in output | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 713 | // Step 2: Write coeff_token | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 716 | // Step 3: Write trailing ones signs (in reverse order) | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 721 | // Step 4: Write remaining levels | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 746 | // Step 5: Write total_zeros (if TotalCoeff < max_num_coeff) | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 752 | // Step 6: Compute and write run_before values | COMMENT |
| LOW | third-party/subcodec/src/cavlc.cpp | 587 | // Step 1: Read coeff_token | COMMENT |
| LOW | third-party/subcodec/src/cavlc.cpp | 652 | // Step 6: Place coefficients in zig-zag order | COMMENT |
| LOW | third-party/subcodec/src/cavlc.cpp | 678 | // Step 1: Scan coefficients to find non-zeros | COMMENT |
| LOW | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 174 | // Step 1: Initial point prediction | COMMENT |
| LOW | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 240 | // Step 1: Initial point prediction | COMMENT |
| LOW⚡ | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 1066 | // Step 1: diamond search | COMMENT |
| LOW⚡ | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 1069 | // Step 2: CROSS search | COMMENT |
| LOW⚡ | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 1077 | // Step 1: diamond search + cross | COMMENT |
| LOW⚡ | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 1080 | // Step 2: FeatureSearch | COMMENT |
| LOW | …nh264/src/codec/encoder/core/src/svc_base_layer_md.cpp | 2031 | //Step 3: SubP16 MD | COMMENT |
| LOW | third-party/boringssl/src/include/openssl/ssl.h | 617 | // NOTE: This function must be queried again whenever the handshake state | COMMENT |
| LOW | third-party/boringssl/src/include/openssl/ssl.h | 1340 | // NOTE: This function assumes the caller does not use |SSL_clear| to reuse | COMMENT |
| LOW | third-party/webrtc/absl/absl/status/status.h | 497 | // NOTE: This function should only be called when converting to an associated | COMMENT |
| LOW | third-party/webrtc/absl/absl/status/status.h | 588 | // NOTE: This function does nothing if the Status is ok. | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | tools/animation_sheet.py | 211 | CODE | |
| LOW | tools/animation_sheet.py | 289 | CODE | |
| LOW | tools/animation_sheet.py | 365 | CODE | |
| LOW | tools/ipadiff.py | 229 | CODE | |
| LOW | …ditor/Host/Engine/Scripts/text_input_snapshot_group.py | 153 | CODE | |
| LOW | …or/Host/Engine/Scripts/text_input_keyboard_snapshot.py | 61 | CODE | |
| LOW | …or/Host/Engine/Scripts/text_input_keyboard_snapshot.py | 310 | CODE | |
| LOW | …Editor/Host/Engine/Scripts/text_input_live_boundary.py | 188 | CODE | |
| LOW | …ine/Scripts/validate-text-input-scenario-provenance.py | 37 | CODE | |
| LOW | …ine/Scripts/validate-text-input-scenario-provenance.py | 158 | CODE | |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 56 | CODE | |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 840 | CODE | |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 271 | CODE | |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 528 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 239 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 377 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 487 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 744 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 961 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1013 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1215 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1388 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 1564 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 2251 | CODE | |
| LOW | …RichTextEditor/Host/Engine/Scripts/text_input_batch.py | 2554 | CODE | |
| LOW | …itor/Host/Engine/Scripts/verification_stabilization.py | 101 | CODE | |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 526 | CODE | |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 553 | CODE | |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 585 | CODE | |
| LOW | …Engine/Scripts/tests/test_text_input_group_protocol.py | 614 | CODE | |
| LOW | …ost/Engine/Scripts/tests/test_ime_keyboard_contract.py | 369 | CODE | |
| LOW | …ost/Engine/Scripts/tests/test_ime_keyboard_contract.py | 411 | CODE | |
| LOW | …tor/Host/Engine/Scripts/tests/test_text_input_batch.py | 66 | CODE | |
| LOW | …tor/Host/Engine/Scripts/tests/test_text_input_batch.py | 2326 | CODE | |
| LOW | …/Engine/Scripts/tests/test_text_input_test_commands.py | 197 | CODE | |
| LOW | …/Engine/Scripts/tests/test_text_input_test_commands.py | 1328 | CODE | |
| LOW | …/Engine/Scripts/tests/test_text_input_test_commands.py | 1879 | CODE | |
| LOW | …/Engine/Scripts/tests/test_text_input_live_boundary.py | 117 | CODE | |
| LOW | …/Engine/Scripts/tests/test_text_input_live_boundary.py | 510 | CODE | |
| LOW | …/Engine/Scripts/tests/test_text_input_live_boundary.py | 551 | CODE | |
| LOW | …/Engine/Scripts/tests/test_text_input_live_boundary.py | 569 | CODE | |
| LOW | …/Engine/Scripts/tests/test_text_input_live_boundary.py | 629 | CODE | |
| LOW | …/Engine/Scripts/tests/test_text_input_live_boundary.py | 135 | CODE | |
| LOW | …s/RichTextEditor/Scripts/scan-private-runtime-names.py | 73 | CODE | |
| LOW | …party/yasm/yasm-1.3.0/modules/arch/x86/gen_x86_insn.py | 533 | CODE | |
| LOW | …party/yasm/yasm-1.3.0/modules/arch/x86/gen_x86_insn.py | 148 | CODE | |
| LOW | …d-party/libjxl/libjxl/tools/benchmark/metrics/plots.py | 57 | CODE | |
| LOW | …caling_coefficients/generate_upscaling_coefficients.py | 169 | CODE | |
| LOW | …d-party/libjxl/libjxl/tools/optimizer/apply_simplex.py | 52 | CODE | |
| LOW | third-party/libjxl/libjxl/tools/scripts/check_author.py | 17 | CODE | |
| LOW | …xl/tools/scripts/demo_progressive_saliency_encoding.py | 53 | CODE | |
| LOW | …xl/tools/scripts/demo_progressive_saliency_encoding.py | 77 | CODE | |
| LOW | third-party/libjxl/libjxl/tools/scripts/build_stats.py | 262 | CODE | |
| LOW | …ird-party/libjxl/libjxl/tools/conformance/generator.py | 21 | CODE | |
| LOW | …d-party/libjxl/libjxl/tools/conformance/conformance.py | 76 | CODE | |
| LOW | …d-party/libjxl/libjxl/tools/conformance/conformance.py | 104 | CODE | |
| LOW | …libjxl/libjxl/third_party/highway/docs/mm-converter.py | 77 | CODE | |
| LOW | …i/scripts/dictionary/step-04-generate-java-literals.py | 56 | CODE | |
| LOW | third-party/libyuv/third_party/libyuv/cleanup_links.py | 74 | CODE | |
| LOW | third-party/libyuv/third_party/libyuv/cleanup_links.py | 41 | CODE | |
| 14 more matches not shown… | ||||
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | …s/ffmpeg/Sources/FFMpeg/ffmpeg-8.1.2/tools/zmqshell.py | 62 | except KeyboardInterrupt: | CODE |
| HIGH | …xl/tools/scripts/demo_progressive_saliency_encoding.py | 160 | except OSError: | CODE |
| HIGH | …/libjxl/third_party/brotli/python/tests/_test_utils.py | 114 | except OSError: | CODE |
| HIGH | …/libjxl/third_party/brotli/python/tests/_test_utils.py | 118 | except OSError: | CODE |
| HIGH | third-party/webp/libwebp/swig/libwebp.py | 43 | except NameError: | CODE |
| HIGH | build-system/Make/TartBuild.py | 229 | except Exception: | CODE |
| HIGH | build-system/Make/TartBuild.py | 233 | except Exception: | CODE |
| HIGH | build-system/Make/TartBuild.py | 322 | except (ValueError, OSError): | CODE |
| HIGH | build-system/Make/TartBuild.py | 312 | except Exception: | CODE |
| HIGH | build-system/Make/TartBuild.py | 639 | except ValueError: | CODE |
| HIGH | build-system/Make/TartBuild.py | 819 | except Exception: | CODE |
| HIGH | build-system/Make/TartBuild.py | 526 | except ProcessLookupError: | CODE |
| HIGH | build-system/Make/Make.py | 1581 | except KeyboardInterrupt: | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | …ramUniversalVideoContent/Sources/HLSVideoContent.swift | 471 | print("Error writing cached file to disk") | CODE |
| MEDIUM | …VideoContent/Sources/HLSVideoJSNativeContentNode.swift | 240 | print("Error writing cached file to disk") | CODE |
| MEDIUM | …reExtensionContext/Sources/ShareExtensionContext.swift | 584 | print("Error: \(error)") | CODE |
| MEDIUM | …reExtensionContext/Sources/ShareExtensionContext.swift | 599 | print("Error: \(error)") | CODE |
| LOW | …Engine/Scripts/run-text-input-batched-certification.sh | 154 | except Exception: | CODE |
| LOW | …or/Host/Engine/Scripts/text_input_keyboard_snapshot.py | 205 | except Exception as error: | CODE |
| LOW | …or/Host/Engine/Scripts/text_input_keyboard_snapshot.py | 380 | except Exception as error: | CODE |
| MEDIUM | …or/Host/Engine/Scripts/text_input_keyboard_snapshot.py | 61 | def _sqlite_description(path): | CODE |
| LOW | …Editor/Host/Engine/Scripts/text_input_live_boundary.py | 318 | except Exception as error: | CODE |
| LOW | …Editor/Host/Engine/Scripts/text_input_live_boundary.py | 329 | except Exception as restart_error: | CODE |
| LOW | …Editor/Host/Engine/Scripts/text_input_live_boundary.py | 355 | except Exception as error: | CODE |
| MEDIUM | …Editor/Host/Engine/Scripts/text_input_live_boundary.py | 61 | def _invoke(runner, command, input_text=None): | CODE |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 734 | except Exception: | CODE |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 756 | except Exception: | CODE |
| LOW | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 786 | except Exception: | CODE |
| MEDIUM | …ditor/Host/Engine/Scripts/text_input_group_protocol.py | 136 | def observation_plan(group): | CODE |
| LOW | …t/Engine/Scripts/text_input_keyboard_mutation_audit.py | 197 | except Exception: | CODE |
| LOW | …tor/Host/Engine/Scripts/english_us_keyboard_profile.py | 189 | except Exception: | CODE |
| MEDIUM | …hCore2/Sources/Charts/Renderes/BaseChartRenderer.swift | 134 | print("Error: Unexpecated bounds range!") | CODE |
| MEDIUM | …phCore/Sources/Charts/Renderes/BaseChartRenderer.swift | 116 | print("Error: Unexpecated bounds range!") | CODE |
| MEDIUM | …/Media/ConvertOpusToAAC/Sources/ConvertOpusToAAC.swift | 59 | print("Error: \(e)") | CODE |
| LOW | …xl/tools/scripts/demo_progressive_saliency_encoding.py | 68 | except Exception as exn: | CODE |
| MEDIUM | third-party/libjxl/libjxl/tools/scripts/build_stats.py | 381 | print('Error: %s exceeds stack limit: %d vs %d' % ( | CODE |
| MEDIUM | build-system/GenerateStrings/GenerateStrings.py | 35 | print("Error opening file %s with encoding %s: %s" % (filename, encoding, e.message)) | CODE |
| LOW | build-system/GenerateStrings/GenerateStrings.py | 36 | except Exception as e: | CODE |
| MEDIUM | …ystem/SwiftTL/Sources/SwiftTL/DescriptionParsing.swift | 94 | print("Error while parsing line:\n\(line)\n") | CODE |
| MEDIUM | …ystem/SwiftTL/Sources/SwiftTL/DescriptionParsing.swift | 103 | print("Error while parsing line:\n\(line)\n") | CODE |
| MEDIUM | …ystem/SwiftTL/Sources/SwiftTL/DescriptionParsing.swift | 165 | print("Error while parsing line (layer \(layerNumber)):\n\(line)\n") | CODE |
| MEDIUM | build-system/SwiftTL/Sources/SwiftTL/main.swift | 23 | print("Error: --swift-file-count takes a number") | CODE |
| MEDIUM | build-system/SwiftTL/Sources/SwiftTL/main.swift | 30 | print("Error: Unknown argument: \(arg)") | CODE |
| MEDIUM | build-system/SwiftTL/Sources/SwiftTL/main.swift | 56 | print("Error: --objc-output=<dir> is required for the flat schema") | CODE |
| MEDIUM | build-system/SwiftTL/Sources/SwiftTL/main.swift | 102 | print("Error: \(e)") | CODE |
| MEDIUM | build-system/Make/TartBuild.py | 204 | def _describe_holder(self) -> str: | CODE |
| LOW | build-system/Make/TartBuild.py | 131 | except Exception as e: | CODE |
| LOW | build-system/Make/TartBuild.py | 208 | except Exception: | CODE |
| LOW | build-system/Make/TartBuild.py | 229 | except Exception: | CODE |
| LOW | build-system/Make/TartBuild.py | 233 | except Exception: | CODE |
| LOW | build-system/Make/TartBuild.py | 312 | except Exception: | CODE |
| LOW | build-system/Make/TartBuild.py | 392 | except Exception as e: | CODE |
| LOW | build-system/Make/TartBuild.py | 528 | except Exception as e: | CODE |
| LOW | build-system/Make/TartBuild.py | 625 | except Exception as e: | CODE |
| LOW | build-system/Make/TartBuild.py | 666 | except Exception as e: | CODE |
| LOW | build-system/Make/TartBuild.py | 703 | except Exception as e: | CODE |
| LOW | build-system/Make/TartBuild.py | 734 | except Exception as e: | CODE |
| LOW | build-system/Make/TartBuild.py | 812 | except Exception as e: | CODE |
| LOW | build-system/Make/TartBuild.py | 819 | except Exception: | CODE |
| LOW | build-system/Make/TartBuild.py | 864 | except Exception as e: | CODE |
| LOW | build-system/Make/TartBuild.py | 950 | except Exception as e: | CODE |
| LOW | build-system/Make/DeployBuild.py | 114 | except Exception as e: | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …tEngineEditor/RichTextEngineEditorView+Clipboard.swift | 426 | // Step 1: the raw text, undoing to the pre-paste document. | COMMENT |
| LOW | …tEngineEditor/RichTextEngineEditorView+Clipboard.swift | 438 | // Step 2: the parsed content over the same range, undoing to the raw text. | COMMENT |
| LOW | …rces/RichTextEditorUIKit/Canvas/BlockBackingView.swift | 30 | isUserInteractionEnabled = false // Step 1: pure passthrough; Step 2 enables an inner scroll view | CODE |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 96 | // Step 1: range reduction to [0, 2pi) | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 101 | // Step 2: range reduction to [0, pi] | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 103 | // Step 3: range reduction to [0, pi/2] | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 106 | // Step 4: Taylor-like approximation, scaled by 2**0.75 to make angle | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 114 | // Step 5: angle duplication. | COMMENT |
| LOW⚡ | third-party/libjxl/libjxl/lib/jxl/fast_math-inl.h | 118 | // Step 6: change sign if needed. | COMMENT |
| LOW | …arty/libjxl/libjxl/lib/jxl/modular/transform/palette.h | 44 | // The purpose of this function is solely to extend the interpretation of | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 600 | // Step 2: Read trailing ones signs | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 606 | // Step 3: Read remaining levels | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 628 | // Step 4: Read total_zeros | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 637 | // Step 5: Read run_before for each coefficient and place in output | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 713 | // Step 2: Write coeff_token | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 716 | // Step 3: Write trailing ones signs (in reverse order) | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 721 | // Step 4: Write remaining levels | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 746 | // Step 5: Write total_zeros (if TotalCoeff < max_num_coeff) | COMMENT |
| LOW⚡ | third-party/subcodec/src/cavlc.cpp | 752 | // Step 6: Compute and write run_before values | COMMENT |
| LOW | third-party/subcodec/src/cavlc.cpp | 587 | // Step 1: Read coeff_token | COMMENT |
| LOW | third-party/subcodec/src/cavlc.cpp | 652 | // Step 6: Place coefficients in zig-zag order | COMMENT |
| LOW | third-party/subcodec/src/cavlc.cpp | 678 | // Step 1: Scan coefficients to find non-zeros | COMMENT |
| LOW | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 174 | // Step 1: Initial point prediction | COMMENT |
| LOW | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 240 | // Step 1: Initial point prediction | COMMENT |
| LOW⚡ | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 1066 | // Step 1: diamond search | COMMENT |
| LOW⚡ | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 1069 | // Step 2: CROSS search | COMMENT |
| LOW⚡ | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 1077 | // Step 1: diamond search + cross | COMMENT |
| LOW⚡ | …264/src/codec/encoder/core/src/svc_motion_estimate.cpp | 1080 | // Step 2: FeatureSearch | COMMENT |
| LOW | …nh264/src/codec/encoder/core/src/svc_base_layer_md.cpp | 2031 | //Step 3: SubP16 MD | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | Tests/NativeNavigationReference/measure/inject_probe.py | 36 | if (zR2.origin.y < 140 && zR2.origin.x > 290 && zR2.size.width < 200) [zFound addObject:zV]; | CODE |
| HIGH | …/Engine/Scripts/tests/test_text_input_test_commands.py | 569 | "print 26.5 || print 23F73\n" | CODE |
| HIGH | …y/yasm/yasm-1.3.0/tools/python-yasm/pyxelator/lexer.py | 222 | #self.stack.push( self.get_state() ) | COMMENT |
| HIGH | …dependencies/base/third_party/libevent/event_rpcgen.py | 889 | if (!msg->%(name)s_set || offset < 0 || offset >= msg->%(name)s_length) | CODE |
| HIGH | …dependencies/base/third_party/libevent/event_rpcgen.py | 903 | if (!msg->%(name)s_set || off < 0 || off >= msg->%(name)s_length) | CODE |
| HIGH | build-system/GenerateStrings/GenerateStrings.py | 406 | if (range.index >= 0 && range.index < arguments.count) { | CODE |
| HIGH⚡ | build-system/Make/TartBuild.py | 1068 | hdiutil attach "$METAL_DMG" -mountpoint /Volumes/MetalToolchainCryptex -nobrowse -quiet || true | CODE |
| HIGH⚡ | build-system/Make/TartBuild.py | 1075 | xcrun metal --version || true | CODE |
| HIGH⚡ | build-system/Make/TartBuild.py | 1076 | xcrun -f metallib || true | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | …/Sources/RLottieCore/rlottie/src/lottie/lottieitem.cpp | 119 | // check if cached frame is same as requested frame. | COMMENT |
| HIGH | …peg/Sources/FFMpeg/ffmpeg-8.1.2/libavformat/avformat.h | 1436 | #define AVFMT_FLAG_AUTO_BSF 0x200000 ///< Add bitstream filters as requested by the muxer | COMMENT |
| HIGH | …peg/Sources/FFMpeg/ffmpeg-8.1.2/libavformat/avformat.h | 1436 | #define AVFMT_FLAG_AUTO_BSF 0x200000 ///< Add bitstream filters as requested by the muxer | COMMENT |
| HIGH | …or/Host/Engine/Tests/IDBlockTextViewIntegrationTests.m | 2735 | /// requested is applied as requested, and a correction issued THROUGH THE CONTROLLER'S API from | COMMENT |
| HIGH | submodules/MtProtoKit/Sources/GCDAsyncSocket.m | 4616 | // even if it didn't read as much data as requested. So we need to watch out for that. | COMMENT |
| HIGH | third-party/webp/libwebp/imageio/webpdec.c | 217 | // Need to wipe out the alpha value, as requested. | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …tor/Host/Engine/Scripts/test-generate-contract-data.py | 3 | CODE | |
| LOW | third-party/yasm/yasm-1.3.0/tools/python-yasm/setup.py | 30 | CODE | |
| LOW | …sm/yasm-1.3.0/tools/python-yasm/tests/test_bytecode.py | 1 | CODE | |
| LOW | …sm/yasm-1.3.0/tools/python-yasm/tests/test_bytecode.py | 1 | CODE | |
| LOW | …sm/yasm-1.3.0/tools/python-yasm/tests/test_bytecode.py | 2 | CODE | |
| LOW | …sm/yasm-1.3.0/tools/python-yasm/tests/test_bytecode.py | 2 | CODE | |
| LOW | …/yasm/yasm-1.3.0/tools/python-yasm/pyxelator/genpyx.py | 17 | CODE | |
| LOW | …sm/yasm-1.3.0/tools/python-yasm/pyxelator/wrap_yasm.py | 14 | CODE | |
| LOW | …sm/yasm-1.3.0/tools/python-yasm/pyxelator/wrap_yasm.py | 17 | CODE | |
| LOW | …ird-party/libjxl/libjxl/tools/benchmark/metrics/iqa.py | 18 | CODE | |
| LOW | …l/libjxl/tools/optimizer/update_jpegli_global_scale.py | 13 | CODE | |
| LOW | …rd-party/libjxl/libjxl/tools/optimizer/simplex_fork.py | 19 | CODE | |
| LOW | …rd-party/libjxl/libjxl/tools/optimizer/simplex_fork.py | 20 | CODE | |
| LOW | …rd-party/libjxl/libjxl/tools/optimizer/simplex_fork.py | 21 | CODE | |
| LOW | …rd-party/libjxl/libjxl/tools/optimizer/simplex_fork.py | 23 | CODE | |
| LOW | …rd-party/libjxl/libjxl/tools/optimizer/simplex_fork.py | 26 | CODE | |
| LOW | …xl/tools/scripts/demo_progressive_saliency_encoding.py | 29 | CODE | |
| LOW | …xl/tools/scripts/demo_progressive_saliency_encoding.py | 30 | CODE | |
| LOW | …xl/tools/scripts/demo_progressive_saliency_encoding.py | 31 | CODE | |
| LOW | …ird-party/libjxl/libjxl/tools/conformance/generator.py | 18 | CODE | |
| LOW | …d-party/libjxl/libjxl/third_party/highway/docs/conf.py | 14 | CODE | |
| LOW | …d-party/libjxl/libjxl/third_party/brotli/python/bro.py | 4 | CODE | |
| LOW | …/libjxl/third_party/brotli/python/tests/_test_utils.py | 1 | CODE | |
| LOW | …ty/boringssl/src/crypto/hpke/translate_test_vectors.py | 26 | CODE | |
| LOW | …webrtc/pffft/third_party/pffft/generate_seed_corpus.py | 6 | CODE | |
| LOW | …webrtc/pffft/third_party/pffft/generate_seed_corpus.py | 7 | CODE | |
| LOW | build-system/GenerateStrings/GenerateStrings.py | 11 | CODE | |
| LOW | build-system/Make/GenerateProfiles.py | 1 | CODE | |
| LOW | build-system/Make/GenerateProfiles.py | 4 | CODE | |
| LOW | build-system/Make/GenerateProfiles.py | 6 | CODE | |
| LOW | build-system/Make/GenerateProfiles.py | 7 | CODE | |
| LOW | build-system/Make/GenerateProfiles.py | 11 | CODE | |
| LOW | build-system/Make/ProjectGeneration.py | 1 | CODE | |
| LOW | build-system/Make/ProjectGeneration.py | 5 | CODE | |
| LOW | build-system/Make/BazelLocation.py | 3 | CODE | |
| LOW | build-system/Make/BazelLocation.py | 9 | CODE | |
| LOW | build-system/Make/BazelLocation.py | 9 | CODE | |
| LOW | build-system/Make/TartBuild.py | 21 | CODE | |
| LOW | build-system/Make/DeployBuild.py | 8 | CODE | |
| LOW | build-system/Make/Make.py | 7 | CODE | |
| LOW | build-system/Make/Make.py | 12 | CODE | |
| LOW | build-system/Make/Make.py | 15 | CODE | |
| LOW | build-system/Make/Make.py | 15 | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | …sm/yasm-1.3.0/tools/python-yasm/pyxelator/work_unit.py | 0 | (c) 2002, 2003, 2004, 2005 simon burton <simon@arrowtheory.com> released under gnu lgpl license. | STRING |
| HIGH | …sm/yasm-1.3.0/tools/python-yasm/pyxelator/wrap_yasm.py | 0 | (c) 2002, 2003, 2004, 2005 simon burton <simon@arrowtheory.com> released under gnu lgpl license. | STRING |
| HIGH | …/yasm/yasm-1.3.0/tools/python-yasm/pyxelator/cparse.py | 0 | (c) 2002, 2003, 2004, 2005 simon burton <simon@arrowtheory.com> released under gnu lgpl license. | STRING |
| HIGH | …arty/yasm/yasm-1.3.0/tools/python-yasm/pyxelator/ir.py | 0 | cdecl.py - parse c declarations (c) 2002, 2003, 2004, 2005 simon burton <simon@arrowtheory.com> released under gnu lgpl | STRING |
| HIGH | …m/yasm-1.3.0/tools/python-yasm/pyxelator/parse_core.py | 0 | cdecl.py - parse c declarations (c) 2002, 2003, 2004, 2005 simon burton <simon@arrowtheory.com> released under gnu lgpl | STRING |
| HIGH | …y/yasm/yasm-1.3.0/tools/python-yasm/pyxelator/lexer.py | 0 | cdecl.py - parse c declarations (c) 2002, 2003, 2004, 2005 simon burton <simon@arrowtheory.com> released under gnu lgpl | STRING |
| HIGH | …ty/yasm/yasm-1.3.0/tools/python-yasm/pyxelator/node.py | 0 | cdecl.py - parse c declarations (c) 2002, 2003, 2004, 2005 simon burton <simon@arrowtheory.com> released under gnu lgpl | STRING |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …s/ComposerHarness/Tests/HarnessComposerFuzzTests.swift | 1483 | String(repeating: "lorem ipsum dolor ", count: 20), | CODE |
| LOW | …ss/Tests/HarnessWidthChangeSelectionDisplayTests.swift | 13 | /// "lorem ipsum…" (6 x), caret at 60, 402 → 300 caretRect (0, 72) cursor view still at (205, 26) | COMMENT |
| LOW | …ss/Tests/HarnessWidthChangeSelectionDisplayTests.swift | 40 | private static let text = String(repeating: "lorem ipsum dolor sit amet ", count: 6) | CODE |
| LOW | …ss/Tests/HarnessWidthChangeSelectionDisplayTests.swift | 40 | private static let text = String(repeating: "lorem ipsum dolor sit amet ", count: 6) | CODE |
| LOW | Tests/ComposerHarness/docs/findings.md | 106 | | 2026-09-24 | Engine: after a WIDTH change (rotation, Split View, an iPad size-class change), the drawn cursor and sele | CODE |
| LOW | …stMessageItem/Sources/ListMessageSnippetItemNode.swift | 417 | // "user@example.com" would open example.com, with "user" as a login. | COMMENT |
| LOW | …s/WebProxyTransport/Tests/WebProxyTransportTests.swift | 167 | XCTAssertNil(WebProxyConfiguration.canonicalHost("user@example.com")) | CODE |
| LOW | …odules/TextFormat/Tests/SelfReferentialLinkTests.swift | 29 | XCTAssertTrue(chatInputLinkIsSelfReferential(text: "user@example.com", url: "mailto:user@example.com")) | CODE |
| LOW | …modules/TelegramCore/Tests/NetworkTelemetryTests.swift | 452 | let other = NetworkEngineRequest(payload: Data(), metadata: WrappedRequestMetadata(metadata: "custom user@exampl | CODE |
| LOW | submodules/PhotoResources/Sources/PhotoResources.swift | 2670 | if let url = getAppBundle().url(forResource: "durgerking", withExtension: "placeholder"), let data = try? Da | CODE |
| LOW | submodules/TelegramApi/schema.json | 1 | {"constructors":[{"id":"-1132882121","predicate":"boolFalse","params":[],"type":"Bool"},{"id":"-1720552011","predicate": | CODE |
| LOW | submodules/LegacyComponents/Sources/TGImageView.m | 133 | UIImage *placeholderImage = [[TGImageManager instance] loadAttributeSyncForUri:uri attribute:@"placeholder"] | CODE |
| LOW | …modules/TelegramUI/Resources/Readability/ReaderMode.js | 2 | !function(e,t){"object"==typeof exports&&"undefined"!=typeof module?module.exports=t():"function"==typeof define&&define | CODE |
| LOW | …ts/CameraScreen/Sources/CaptureControlsComponent.swift | 1290 | galleryButtonId = "placeholder" | CODE |
| LOW | …RichTextEditorCoreTests/SelfReferentialLinkTests.swift | 20 | XCTAssertTrue(linkIsSelfReferential(text: "user@example.com", url: "mailto:user@example.com")) | CODE |
| LOW | …ramUI/Components/ShareScreen/Sources/ShareScreen.swift | 935 | subtitle.append(AnimatedTextComponent.Item(id: "placeholder", isUnbreakable: true, content: .text(string | CODE |
| LOW | …Wallet/WalletSendScreen/Sources/WalletSendScreen.swift | 2807 | id: "placeholder", | CODE |
| LOW | …ransactionScreen/Sources/WalletTransactionScreen.swift | 3313 | id: "placeholder", | CODE |
| LOW | submodules/Stripe/PublicHeaders/Stripe/STPAddress.h | 46 | * The user's full name (e.g. "Jane Doe") | COMMENT |
| LOW | …rd-party/SwiftMath/Sources/MathRender/MTMathList.swift | 364 | string += "{\(self.numerator?.description ?? "placeholder")}{\(self.denominator?.description ?? "placeholder")}" | CODE |
| LOW | …rd-party/SwiftMath/Sources/MathRender/MTMathList.swift | 413 | string += "{\(self.radicand?.description ?? "placeholder")}" | CODE |
| LOW | …em/SwiftTL/Sources/SwiftTL/Parser/Parsers/Prefix.swift | 31 | /// var input = "Lorem ipsum dolor"[...] | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …ram/WatchApp/tgwatch Watch App/Chats/ChatRowView.swift | 152 | preview: "Mom: don't forget to call your grandmother", | CODE |
| LOW | …s/ffmpeg/Sources/FFMpeg/ffmpeg-8.1.2/libavformat/dss.c | 269 | /* We make one byte-step here. Don't forget to add offset. */ | COMMENT |
| MEDIUM | submodules/MtProtoKit/Sources/GCDAsyncSocket.m | 4329 | // As mentioned earlier, there are encrypted packets coming across the TCP stream. | COMMENT |
| MEDIUM | …les/Stripe/PublicHeaders/Stripe/STPBackendAPIAdapter.h | 34 | * Retrieve the cards to be displayed inside a payment context. On your backend, retrieve the Stripe customer associate | COMMENT |
| MEDIUM | third-party/yasm/yasm-1.3.0/frontends/yasm/yasm.xml | 322 | As discussed above, this option may be followed by other | CODE |
| LOW | third-party/yasm/yasm-1.3.0/libyasm/expr.c | 654 | * But don't forget to subtract one for the expr itself! | COMMENT |
| LOW | …ty/libjxl/libjxl/third_party/skcms/src/Transform_inl.h | 679 | // TODO: don't forget to optimize gather_32(). | COMMENT |
| LOW | third-party/webp/libwebp/examples/unicode.h | 109 | // Don't forget to free wargv before returning (e.g. from main). | COMMENT |
| LOW | third-party/wamr/core/config.h | 509 | * Note: on platforms with lazy function binding, don't forget to consider | COMMENT |
| LOW | …rty/boringssl/src/crypto/fipsmodule/md5/asm/md5-586.pl | 107 | # make sure to do 'D' first, not 'B', else we clash with | COMMENT |
| LOW | …rty/boringssl/src/crypto/fipsmodule/md5/asm/md5-586.pl | 125 | # make sure to do 'D' first, not 'B', else we clash with | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 2593 | # Check if any of the arguments is a wrapper script. | COMMENT |
| LOW | third-party/libjxl/libjxl/third_party/lcms/ltmain.sh | 8377 | # Loop over the list of objects to be linked. | COMMENT |
| LOW | …hird_party/libyuv/tools_libyuv/autoroller/roll_deps.py | 469 | # Check if an update is necessary. | COMMENT |
| LOW | …dependencies/base/third_party/libevent/event_rpcgen.py | 237 | # Check if it was decoded completely | COMMENT |
| LOW | build-system/Make/GenerateProfiles.py | 110 | # Check if the removal actually failed by trying to extract | COMMENT |
| LOW | build-system/Make/BazelLocation.py | 31 | # Read the file in chunks to avoid using too much memory | COMMENT |
| LOW | build-system/Make/TartBuild.py | 594 | # Check if the VM appears in the list with "running" status | COMMENT |
| LOW | build-system/Make/TartBuild.py | 744 | # Check if local_path is a directory | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …ffmpeg/Sources/FFMpeg/ffmpeg-8.1.2/libavcodec/j2kenc.c | 1673 | // TODO: implement setting non-standard precinct size | COMMENT |
| LOW | …peg/Sources/FFMpeg/ffmpeg-8.1.2/libavcodec/opus/silk.c | 677 | // TODO: implement error recovery | COMMENT |
| LOW | submodules/Postbox/Sources/MessageHistoryView.swift | 525 | //TODO:implement | COMMENT |
| LOW | submodules/Postbox/Sources/MessageHistoryView.swift | 548 | //TODO:implement | COMMENT |
| LOW | submodules/TelegramUI/Sources/ChatHistoryListNode.swift | 1162 | //TODO:implement | COMMENT |
| LOW | submodules/TelegramUI/Sources/ChatHistoryListNode.swift | 2144 | //TODO:implement | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | third-party/libjxl/libjxl/lib/jxl/enc_optimize.h | 92 | // Usage example: | COMMENT |
| LOW | third-party/webp/libwebp/examples/img2webp.c | 13 | // Example usage: | COMMENT |
| LOW | third-party/webrtc/absl/absl/synchronization/mutex.h | 168 | // Example usage: | COMMENT |
| LOW | third-party/webrtc/absl/absl/hash/internal/hash.h | 98 | // Example usage: | COMMENT |
| LOW | …rty/webrtc/absl/absl/debugging/internal/vdso_support.h | 30 | // Example usage: | COMMENT |
| LOW | …ird-party/webrtc/absl/absl/base/internal/raw_logging.h | 39 | // Usage example: | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | third-party/boringssl/src/crypto/dh_extra/params.c | 332 | // I've implemented the second simple method :-). | COMMENT |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| HIGH | …arty/libjxl/libjxl/third_party/brotli/python/brotli.py | 26 | Compress a byte string. Args: string (bytes): The input data. mode (int, optional): The compression mod | STRING |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | …party/yasm/yasm-1.3.0/modules/arch/x86/gen_x86_insn.py | 379 | CODE | |
| LOW | third-party/libjxl/libjxl/tools/conformance/lcms2.py | 55 | CODE | |
| LOW | …libjxl/libjxl/third_party/highway/docs/mm-converter.py | 44 | CODE | |
| LOW | …dependencies/base/third_party/libevent/event_rpcgen.py | 1269 | CODE | |
| LOW | build-system/Make/TartBuild.py | 974 | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| MEDIUM | …sm/yasm-1.3.0/tools/python-yasm/pyxelator/wrap_yasm.py | 34 | CODE |
| Severity | File | Line | Snippet | Context |
|---|---|---|---|---|
| LOW | build-system/Make/TartBuild.py | 23 | logger = logging.getLogger(__name__) | CODE |