3.3

Adjusted Signal

3.3

Raw Pattern Score

100%

Time Factor

2026-10-31

Last Push

6.3K

Stars

Language

153.2M

Lines of Code

341.6K

Files

514.0K

Pattern Hits

2026-10-31

Scan Date

0.04

HC Hit Rate

Risk Review · Payload v1

Use each vector to guide manual verification of the underlying findings.

Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.

Cognitive Ownership Risk 12.8/100 · LOW

Can maintainers explain intent, assumptions, and trade-offs? 492830 finding(s).

Hallucinated Dependency & Supply Chain Risk 0.1/100 · LOW

Are imports declared and package/API names verified? 2746 finding(s).

Agent Over-Engineering Ratio 2.6/100 · LOW

Are wrappers, guards, and repeated structures necessary? 28402 finding(s).

PR Review Velocity Impact 17.5/100 · LOW

Which changes need focused human review? 514014 finding(s).

What These Metrics Mean

Adjusted Signal: Legacy pattern score normalized per 1,000 scanned lines and multiplied by the repository-level time factor. It is not an estimate of AI authorship.
Raw Pattern Score: Sum of severity- and context-weighted pattern findings before applying the time factor.
Time Factor: A coarse multiplier based on repository last-push metadata. It does not identify when individual code was written.
Pattern Hits: Count of configured pattern findings. Review each location and surrounding code before acting.
HC Hit Rate: High- and critical-severity findings per scanned file. Severity is a configured detector weight, not proof of a vulnerability or authorship.
Lines / Files: Scan coverage denominators used by the legacy normalized score.

Pattern-Signal History

This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.

Severity Breakdown

Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.

CRITICAL 31HIGH 12332MEDIUM 7298LOW 494353

Directory Score Breakdown

This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.

Pattern Findings

The scanner identified 514014 distinct pattern matches across 28 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.

Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.

Over-Commented Block477393 hits · 402644 pts

Severity	File	Line	Snippet	Context
LOW	…nd.675x/secureos/optee/drivers/bcm_sotp/src/bcm_sotp.c	41	#define SOTP_PROG_CONTROL 0x0	COMMENT
LOW	…nd.675x/secureos/optee/drivers/bcm_sotp/src/bcm_sotp.c	61	#define SOTP_STAT_0__PROG_OK BIT(2)	COMMENT
LOW	…nd.675x/secureos/optee/plat/plat-bca/platform_config.h	41	#define SECRAM_SIZE (CFG_OPTEE_CORE_SIZE)	COMMENT
LOW	…nd.675x/secureos/optee/plat/plat-bca/platform_config.h	61	#define RANGE_CHK_CONTROL_1_OFFSET 0x818	COMMENT
LOW	…nd.675x/secureos/optee/plat/plat-bca/platform_config.h	161		COMMENT
LOW	…nd.675x/secureos/optee/plat/plat-bca/platform_config.h	181	#if defined(PLATFORM_FLAVOR_4908)	COMMENT
LOW	…nd.675x/secureos/optee/plat/plat-bca/platform_config.h	201	#define RANGE_CHK_UBUS_3_UPP_OFFSET 0x850	COMMENT
LOW	…nd.675x/secureos/optee/plat/plat-bca/platform_config.h	221	#define PMC_MAP_SIZE 0x00100000	COMMENT
LOW	…nd.675x/secureos/optee/plat/plat-bca/platform_config.h	241	#define BOOT_LOOKUP_SIZE 0x00001000	COMMENT
LOW	…nd.675x/secureos/optee/plat/plat-bca/platform_config.h	281	#define CFG_TEE_RAM_PH_SIZE (2 * 1024 * 1024)	COMMENT
LOW	…nd.675x/secureos/optee/plat/plat-bca/platform_config.h	301	#endif /PLATFORM_CONFIG_H/	COMMENT
LOW	…-rt-5.04axhnd.675x/secureos/optee/plat/plat-bca/main.c	21		COMMENT
LOW	…-rt-5.04axhnd.675x/secureos/optee/plat/plat-bca/main.c	41	#include <kernel/tee_time.h>	COMMENT
LOW	…/optee/plat/plat-bca/bcm63138/platform_support_63138.h	41	#define GT_INT_STATUS_OFFSET 0x0000000c /* Global Timer Interrupt Status Register */	COMMENT
LOW	…/optee/plat/plat-bca/bcm63138/platform_support_63138.h	61	#define SCU_SAC_CTRL_INIT 0xF	COMMENT
LOW	…ecureos/optee/plat/plat-bca/bcm_drivers/bpcm_defines.h	41	#endif	COMMENT
LOW	…ecureos/optee/plat/plat-bca/bcm_drivers/bpcm_defines.h	781	#define RCAL_0P5UM_HORZ 2	COMMENT
LOW	…ecureos/optee/pta/pta_sotp/include/bcm_sotp_ser_core.h	41	#define SOTP_SER_WRAPPER_ROW_1 9	COMMENT
LOW	…ecureos/optee/pta/pta_sotp/include/bcm_sotp_ser_core.h	61	#define SOTP_SER_PROD_ID_ROW 17	COMMENT
LOW	…ecureos/optee/pta/pta_sotp/include/bcm_sotp_ser_core.h	81	SOTP_KEY_SEC_SIZE - 1)	COMMENT
LOW	…ecureos/optee/pta/pta_sotp/include/bcm_sotp_ser_core.h	101		COMMENT
LOW	…ecureos/optee/pta/pta_sotp/include/bcm_sotp_ser_core.h	221	} OTP_STATUS;	COMMENT
LOW	…ecureos/optee/pta/pta_sotp/include/bcm_sotp_ser_core.h	241	//OTP_STATUS bcm_read_dev_cfg( dev_config_t *dev_config);	COMMENT
LOW	…optee/apps/teec_hello/include/user_ta_header_defines.h	1	#ifndef USER_TA_HEADER_DEFINES_H	COMMENT
LOW	…5x/secureos/optee/apps/ta_sec_key/include/ta_sec_key.h	101	#define SK_MAX_OBJ_LEN 32	COMMENT
LOW	…nd.675x/targets/fs.src/rom/etc/init.d/x2serdes_init.sh	41	# fieldWrite GPON_GEARBOX_0[cr_xgwan_top_wan_misc_gpon_gearbox_fifo_cfg_0_tx_16bit_order], 0x1	COMMENT
LOW	…nd.675x/targets/fs.src/rom/etc/init.d/x2serdes_init.sh	61	sw 0x80144050 0x105	COMMENT
LOW	…nd.675x/targets/fs.src/rom/etc/init.d/x2serdes_init.sh	81	#sw 0x80144044 0x0	COMMENT
LOW	…nd.675x/targets/fs.src/rom/etc/init.d/x2serdes_init.sh	641	sw 0x8014405c 0x0	COMMENT
LOW	…nd.675x/targets/fs.src/rom/etc/init.d/x2serdes_init.sh	721	#######	COMMENT
LOW	…nd.675x/targets/fs.src/rom/etc/init.d/x2serdes_init.sh	741	#dw 0x80144024 # 0x80061	COMMENT
LOW	…nd.675x/targets/fs.src/rom/etc/init.d/x2serdes_init.sh	801	#sw 0x80144064 0xfffb	COMMENT
LOW	…nd.675x/targets/fs.src/rom/etc/init.d/x2serdes_init.sh	901	#sw 0x8014405c 0x0	COMMENT
LOW	…ter-sysdep.rt-ax86u_pro/bdmf_shell/bdmf_shell_client.c	41	#include <unistd.h>	COMMENT
LOW	….rt-ax86u_pro/bdmf_shell/scripts/xrdp_hw_accel_dump.sh	1	#!/bin/sh	COMMENT
LOW	…hnd.675x/router-sysdep.rt-ax86u_pro/bcm_util/bcm_net.h	81	#endif	COMMENT
LOW	…x/router-sysdep.rt-ax86u_pro/bcm_util/bcm_ethswutils.c	41	#include <unistd.h>	COMMENT
LOW	…rd/libnfnetlink/include/libnfnetlink/linux_nfnetlink.h	1	#ifndef _NFNETLINK_H	COMMENT
LOW	…t-ax86u_pro/urlfilterd/libnfnetlink/src/libnfnetlink.c	41	#include <errno.h>	COMMENT
LOW	…libnetfilter_queue/include/libnetfilter_queue/libipq.h	21	#ifndef _LIBIPQ_H	COMMENT
LOW	…urlfilterd/libnetfilter_queue/src/libnetfilter_queue.c	21		COMMENT
LOW	…75x/router-sysdep.rt-ax86u_pro/fscryptctl/fscryptctl.c	21	* License for the specific language governing permissions and limitations under	COMMENT
LOW	…hnd.675x/router-sysdep.rt-ax86u_pro/fscryptctl/test.py	1	# test.py - Runs tests for the fscryptctl binary	COMMENT
LOW	…d.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc_cmds.c	21	#include <stdlib.h>	COMMENT
LOW	…d.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc_cmds.c	41	#define WP_BLKS_PER_QUERY 32	COMMENT
LOW	…xhnd.675x/router-sysdep.rt-ax86u_pro/mmc-utils/lsmmc.c	41	#include <stdarg.h>	COMMENT
LOW	…4axhnd.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc.h	21		COMMENT
LOW	…4axhnd.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc.h	41	#define EXT_CSD_S_CMD_SET 504	COMMENT
LOW	…4axhnd.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc.h	61	#define EXT_CSD_CACHE_SIZE_2 251	COMMENT
LOW	…4axhnd.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc.h	81	#define EXT_CSD_WR_REL_PARAM 166	COMMENT
LOW	…4axhnd.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc.h	101	#define EXT_CSD_GP_SIZE_MULT_1_1 144	COMMENT
LOW	…4axhnd.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc.h	141	#define EXT_CSD_HPI_IMPL (1<<1)	COMMENT
LOW	…4axhnd.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc.h	161	#define EXT_CSD_PART_CONFIG_ACC_ACK (0x40)	COMMENT
LOW	…4axhnd.675x/router-sysdep.rt-ax86u_pro/mmc-utils/mmc.h	181	#define MMC_RSP_136 (1 << 1) /* 136 bit response */	COMMENT
LOW	…sysdep.rt-ax86u_pro/mmc-utils/3rdparty/hmac_sha/sha2.c	41		COMMENT
LOW	…sysdep.rt-ax86u_pro/mmc-utils/3rdparty/hmac_sha/sha2.h	41	#define SHA224_DIGEST_SIZE ( 224 / 8)	COMMENT
LOW	…uter-sysdep.rt-ax86u_pro/bcm_flashutil/bcm_flashutil.c	41	#include "board.h" /* in bcmdrivers/opensource/include/bcm963xx, for BCM_IMAGE_CFE */	COMMENT
LOW	…sysdep.rt-ax86u_pro/bcm_flashutil/bcm_flashutil_emmc.c	41	#include "bcm_flashutil.h"	COMMENT
LOW	…sysdep.rt-ax86u_pro/bcm_flashutil/bcm_flashutil_emmc.c	61	#endif	COMMENT
LOW	…sysdep.rt-ax86u_pro/bcm_flashutil/bcm_flashutil_nand.c	41	#include "bcm_btrm_gen3_common.h"	COMMENT
477333 more matches not shown…

Cross-File Repetition11023 hits · 55115 pts

Severity	File	Line	Snippet	Context
HIGH	…hnd.675x/router-sysdep.rt-ax86u_pro/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…xhnd.675x/router-sysdep.gt-axe16000/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…d.675x/router-sysdep.gt-ax11000_pro/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…t-5.04axhnd.675x/router-sysdep.xt12/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…hnd.675x/router-sysdep.rt-ax88u_pro/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…4axhnd.675x/router-sysdep.gt-ax6000/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be96u/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be92u/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be88u/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…behnd.4916/router-sysdep.rt-be58_go/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be86u/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…ehnd.4916/router-sysdep.gt-be98_pro/fscryptctl/test.py	0	calls the binary at binary_path with the specified stdin and arguments. if the command completes successfully, returns t	STRING
HIGH	…hnd.675x/router-sysdep.rt-ax86u_pro/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…xhnd.675x/router-sysdep.gt-axe16000/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…d.675x/router-sysdep.gt-ax11000_pro/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…t-5.04axhnd.675x/router-sysdep.xt12/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…hnd.675x/router-sysdep.rt-ax88u_pro/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…4axhnd.675x/router-sysdep.gt-ax6000/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be96u/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be92u/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be88u/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…behnd.4916/router-sysdep.rt-be58_go/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be86u/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…ehnd.4916/router-sysdep.gt-be98_pro/fscryptctl/test.py	0	remounts the filesystem and clears the inode cache.	STRING
HIGH	…hnd.675x/router-sysdep.rt-ax86u_pro/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…xhnd.675x/router-sysdep.gt-axe16000/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…d.675x/router-sysdep.gt-ax11000_pro/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…t-5.04axhnd.675x/router-sysdep.xt12/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…hnd.675x/router-sysdep.rt-ax88u_pro/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…4axhnd.675x/router-sysdep.gt-ax6000/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be96u/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be92u/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be88u/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…behnd.4916/router-sysdep.rt-be58_go/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be86u/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…ehnd.4916/router-sysdep.gt-be98_pro/fscryptctl/test.py	0	this fixture provides a lambda which, when called, passes the first argument as stdin and the subsequent arguments as co	STRING
HIGH	…hnd.675x/router-sysdep.rt-ax86u_pro/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…xhnd.675x/router-sysdep.gt-axe16000/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…d.675x/router-sysdep.gt-ax11000_pro/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…t-5.04axhnd.675x/router-sysdep.xt12/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…hnd.675x/router-sysdep.rt-ax88u_pro/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…4axhnd.675x/router-sysdep.gt-ax6000/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be96u/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be92u/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be88u/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…behnd.4916/router-sysdep.rt-be58_go/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be86u/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…ehnd.4916/router-sysdep.gt-be98_pro/fscryptctl/test.py	0	this fixture creates a new anonymous session keyring and subscribes the process to it. the id of this keyring is returne	STRING
HIGH	…hnd.675x/router-sysdep.rt-ax86u_pro/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…xhnd.675x/router-sysdep.gt-axe16000/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…d.675x/router-sysdep.gt-ax11000_pro/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…t-5.04axhnd.675x/router-sysdep.xt12/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…hnd.675x/router-sysdep.rt-ax88u_pro/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…4axhnd.675x/router-sysdep.gt-ax6000/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be96u/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be92u/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be88u/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…behnd.4916/router-sysdep.rt-be58_go/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…04behnd.4916/router-sysdep.rt-be86u/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
HIGH	…ehnd.4916/router-sysdep.gt-be98_pro/fscryptctl/test.py	0	this fixture returns the mountpoint of the designated testing filesystem. before the path is returned and on cleanup, th	STRING
10963 more matches not shown…

Decorative Section Separators4913 hits · 11802 pts

Severity	File	Line	Snippet	Context
MEDIUM⚡	…impl87/main/components/opensource/libxml2/doc/index.py	7	# =================	COMMENT
MEDIUM	…main/components/opensource/libxml2/bakefile/Readme.txt	33	# -------------------------------------------------------------------------	COMMENT
MEDIUM	…main/components/opensource/libxml2/bakefile/Readme.txt	35	# -------------------------------------------------------------------------	COMMENT
MEDIUM	…ensource/router_tools/libnl/python/examples/nl80211.py	3	# ---------------------------------------------------------	COMMENT
MEDIUM	…s/opensource/char/plat-bcm/impl1/qemu/qemu_init_dsl.sh	92	# --------------------------------------------------------------------------------	COMMENT
MEDIUM	…s/opensource/char/plat-bcm/impl1/qemu/qemu_init_dsl.sh	94	# --------------------------------------------------------------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2178	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2180	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2187	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2189	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2242	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2244	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2254	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2256	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2283	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2285	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2291	// #---------------------------	COMMENT
MEDIUM⚡	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2293	// #---------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	767	// #---------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	769	// #---------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	1364	// #---------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	1366	// #---------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2219	// #---------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2221	// #---------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2268	// #---------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2270	// #---------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2306	// #--------------------------------------	COMMENT
MEDIUM	…5x/bcmdrivers/opensource/phy/phy_drv_158class_serdes.c	2308	// #--------------------------------------	COMMENT
MEDIUM	…xhnd.675x/bootloaders/u-boot-2019.07/tools/img2brec.sh	17	# ===============================================================	COMMENT
MEDIUM	…hnd.675x/bootloaders/u-boot-2019.07/test/fs/fs-test.sh	21	# --------------------------------------------	COMMENT
MEDIUM	…hnd.675x/bootloaders/u-boot-2019.07/test/fs/fs-test.sh	23	# --------------------------------------------	COMMENT
MEDIUM	…-5.04axhnd.675x/bootloaders/u-boot-2019.07/doc/conf.py	524	# ------------------------------------------------------------------------------	STRING
MEDIUM	…-5.04axhnd.675x/bootloaders/u-boot-2019.07/doc/conf.py	527	# ------------------------------------------------------------------------------	STRING
MEDIUM	…ootloaders/u-boot-2019.07/doc/sphinx/kernel_include.py	30	# ==============================================================================	STRING
MEDIUM	…ootloaders/u-boot-2019.07/doc/sphinx/kernel_include.py	32	# ==============================================================================	STRING
MEDIUM⚡	…ootloaders/u-boot-2019.07/doc/sphinx/kernel_include.py	44	# ==============================================================================	STRING
MEDIUM⚡	…ootloaders/u-boot-2019.07/doc/sphinx/kernel_include.py	46	# ==============================================================================	STRING
MEDIUM⚡	…ootloaders/u-boot-2019.07/doc/sphinx/kernel_include.py	55	# ==============================================================================	STRING
MEDIUM⚡	…ootloaders/u-boot-2019.07/doc/sphinx/kernel_include.py	57	# ==============================================================================	STRING
MEDIUM	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	146	# ==============================================================================	COMMENT
MEDIUM	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	148	# ==============================================================================	COMMENT
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	41	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	43	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	52	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	54	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	82	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	84	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	93	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	95	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	105	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	108	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	110	# ==============================================================================	STRING
MEDIUM⚡	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	112	# ==============================================================================	STRING
MEDIUM	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	68	# ==============================================================================	STRING
MEDIUM	…/bootloaders/u-boot-2019.07/doc/sphinx/rstFlatTable.py	70	# ==============================================================================	STRING
MEDIUM	…x/bootloaders/u-boot-2019.07/doc/sphinx/load_config.py	8	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	…x/bootloaders/u-boot-2019.07/doc/sphinx/load_config.py	10	# ------------------------------------------------------------------------------	COMMENT
MEDIUM	….675x/bootloaders/u-boot-2019.07/doc/sphinx/kfigure.py	81	# -------------	STRING
MEDIUM	….675x/bootloaders/u-boot-2019.07/doc/sphinx/kfigure.py	118	# -------------------------------------------	STRING
MEDIUM	….675x/bootloaders/u-boot-2019.07/doc/sphinx/kfigure.py	193	# --------------------------	STRING
4853 more matches not shown…

Hyper-Verbose Identifiers9765 hits · 8097 pts

Severity	File	Line	Snippet	Context
LOW	…l/impl87/main/components/opensource/libxml2/gentest.py	302	def add_generated_return_type(name):	CODE
LOW	…l87/main/components/opensource/libxml2/doc/apibuild.py	1914	def serialize_xrefs_functions(self, output):	CODE
LOW	…l87/main/components/opensource/libxml2/doc/apibuild.py	1945	def serialize_xrefs_constructors(self, output):	CODE
LOW	…l87/main/components/opensource/libxml2/doc/apibuild.py	1986	def serialize_xrefs_references(self, output):	CODE
LOW	…mpl87/main/components/opensource/libxml2/doc/news.html	240	add function xmlTextReaderRelaxNGValidateCtxt() (Noam Postavsky),	CODE
LOW	…impl87/main/components/opensource/libxml2/doc/xml.html	952	add function xmlTextReaderRelaxNGValidateCtxt() (Noam Postavsky),	CODE
LOW⚡	…ain/components/opensource/jquerylib/jquery.flot.min.js	10	(function($){$.color={};$.color.make=function(r,g,b,a){var o={};o.r=r\|\|0;o.g=g\|\|0;o.b=b\|\|0;o.a=a!=null?a:1;o.add=functio	CODE
LOW⚡	…ain/components/opensource/jquerylib/jquery.flot.min.js	10	(function($){$.color={};$.color.make=function(r,g,b,a){var o={};o.r=r\|\|0;o.g=g\|\|0;o.b=b\|\|0;o.a=a!=null?a:1;o.add=functio	CODE
LOW	…87/main/components/opensource/jquerylib/jquery.flot.js	985	function getOrCreateAxis(axes, number) {	CODE
LOW	…87/main/components/opensource/jquerylib/jquery.flot.js	1432	function allocateAxisBoxFirstPhase(axis) {	CODE
LOW	…87/main/components/opensource/jquerylib/jquery.flot.js	1517	function allocateAxisBoxSecondPhase(axis) {	CODE
LOW	…87/main/components/opensource/jquerylib/jquery.flot.js	1530	function adjustLayoutForThingsStickingOut() {	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_sta_dynamic.py	133	def test_sta_dynamic_ext_mac_addr_change(dev, apdev):	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_sta_dynamic.py	168	def test_sta_dynamic_ext_mac_addr_change_for_connection(dev, apdev):	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_sta_dynamic.py	217	def test_sta_dynamic_random_mac_addr(dev, apdev):	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_sta_dynamic.py	255	def test_sta_dynamic_random_mac_addr_keep_oui(dev, apdev):	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_sta_dynamic.py	297	def test_sta_dynamic_random_mac_addr_scan(dev, apdev):	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_sta_dynamic.py	314	def test_sta_dynamic_random_mac_addr_scan_keep_oui(dev, apdev):	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_authsrv.py	192	def test_authsrv_testing_options(dev, apdev):	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_authsrv.py	225	def test_authsrv_unknown_user(dev, apdev):	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_authsrv.py	243	def test_authsrv_unknown_client(dev, apdev):	CODE
LOW⚡	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1180	def test_sae_reflection_attack_ecc(dev, apdev):	CODE
LOW⚡	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1185	def test_sae_reflection_attack_ffc(dev, apdev):	CODE
LOW⚡	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1189	def sae_reflection_attack_internal(apdev, dev, group):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	101	def test_sae_pmksa_caching_pmkid(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	136	def test_sae_pmksa_caching_disabled(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	234	def test_sae_group_nego_no_match(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	274	def test_sae_forced_anti_clogging(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	362	def test_sae_and_psk_transition_disable(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	416	def test_sae_missing_password(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	433	def test_sae_key_lifetime_in_memory(dev, apdev, params):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	780	def test_sae_proto_commit_delayed(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	856	def test_sae_proto_commit_replay(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	939	def test_sae_proto_confirm_replay(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1036	def test_sae_proto_hostapd_ecc(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1059	def test_sae_proto_hostapd_ffc(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1121	def test_sae_no_ffc_by_default(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1210	def test_sae_reflection_attack_ecc_internal(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1215	def test_sae_reflection_attack_ffc_internal(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1251	def test_sae_commit_invalid_scalar_element_ap(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1266	def test_sae_commit_invalid_element_ap(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1281	def test_sae_commit_invalid_scalar_element_sta(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1296	def test_sae_commit_invalid_element_sta(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1312	def test_sae_anti_clogging_proto(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1486	def test_sae_bignum_failure_unsafe_group(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1508	def test_sae_invalid_anti_clogging_token_req(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1700	def test_sae_password_id_only(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1712	def test_sae_password_id_pwe_looping(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1730	def test_sae_password_id_pwe_check_ap(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1751	def test_sae_password_id_pwe_check_sta(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1769	def test_sae_forced_anti_clogging_pw_id(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1803	def test_sae_anti_clogging_during_attack(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1858	def run_sae_anti_clogging_during_attack(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	1958	def test_sae_confirm_immediate(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	2105	def test_sae_pwe_loop_only_ap(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	2496	def test_sae_okc_pmk_lifetime(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	2585	def test_sae_and_psk_multiple_passwords(dev, apdev, params):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_wep.py	54	def test_wep_shared_key_auth_not_allowed(dev, apdev):	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_wep.py	68	def test_wep_shared_key_auth_multi_key(dev, apdev):	CODE
LOW⚡	…nsource/router_tools/hostapd/tests/hwsim/test_ap_ft.py	499	def test_ap_ft_pmf_required_mismatch(dev, apdev):	CODE
9705 more matches not shown…

Empty Error Handlers916 hits · 4435 pts

Severity	File	Line	Snippet	Context
HIGH	…source/router_tools/libnl/python/netlink/route/link.py	455	except AttributeError:	CODE
HIGH	…/opensource/router_tools/hostapd/hostapd/wps-ap-nfc.py	57	except Exception as e:	CODE
HIGH	…e/router_tools/hostapd/tests/hwsim/test_hs20_filter.py	102	except socket.timeout:	CODE
HIGH	…e/router_tools/hostapd/tests/hwsim/test_hs20_filter.py	140	except socket.timeout:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_bgscan.py	157	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_bgscan.py	245	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_pmf.py	986	except OSError as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	624	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	2223	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	2299	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	2391	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	2853	except socket.timeout:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3514	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3522	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3530	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3552	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3567	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3580	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3626	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3636	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3643	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	5040	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	5448	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	2470	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	2511	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3506	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	4394	except Exception as e:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	4677	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	4719	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	4730	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	9482	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	9496	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	9526	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	9580	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	9601	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	9609	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	4696	except:	CODE
HIGH	…ce/router_tools/hostapd/tests/hwsim/test_ap_dynamic.py	393	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_radius.py	1439	except pyrad.client.Timeout:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_psk.py	394	except:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_psk.py	2636	except Exception:	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_ap_psk.py	452	except:	CODE
HIGH	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	10137	except OpenSSL.SSL.WantReadError:	CODE
HIGH	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	10152	except OpenSSL.SSL.WantReadError:	CODE
HIGH	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	5051	except socket.timeout:	CODE
HIGH	…e/router_tools/hostapd/tests/hwsim/test_pmksa_cache.py	892	except:	CODE
HIGH	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1223	except dbus.exceptions.DBusException as e:	CODE
HIGH	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	5299	except dbus.exceptions.DBusException as e:	CODE
HIGH	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	580	except dbus.exceptions.DBusException as e:	CODE
HIGH	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1665	except:	CODE
HIGH	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1957	except dbus.exceptions.DBusException as e:	CODE
HIGH	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	2107	except dbus.exceptions.DBusException as e:	CODE
HIGH	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	191	except dbus.exceptions.DBusException as e:	CODE
HIGH	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1967	except dbus.exceptions.DBusException as e:	CODE
HIGH	…nsource/router_tools/hostapd/tests/hwsim/remotehost.py	238	except:	CODE
HIGH	…ce/router_tools/hostapd/tests/hwsim/test_fst_module.py	2540	except HwsimSkip as e:	CODE
HIGH	…ce/router_tools/hostapd/tests/hwsim/test_fst_module.py	1968	except:	CODE
HIGH	…ce/router_tools/hostapd/tests/hwsim/test_fst_module.py	1540	except:	CODE
HIGH	…ce/router_tools/hostapd/tests/hwsim/test_fst_module.py	1545	except:	CODE
HIGH	…ensource/router_tools/hostapd/tests/hwsim/test_scan.py	1775	except ValueError:	CODE
856 more matches not shown…

Self-Referential Comments1626 hits · 4387 pts

Severity	File	Line	Snippet	Context
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	1192	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	1203	# This function implements the same check as func_lalib_p without	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	1226	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	1235	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	1260	# This function is only a basic sanity check; it will hardly flush out	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	1391	# Create a libtool object file (analogous to a ".la" file),	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	5947	# Create the object directory.	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	8561	# Create the old-style object.	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	8581	# Create an invalid libtool object if no PIC, so that we don't	COMMENT
MEDIUM	…pl87/main/components/opensource/libxml2/regressions.py	245	# The following classes are used with the xmlreader interface to interpret the	COMMENT
MEDIUM	…87/main/components/opensource/libxml2/python/libxml.py	234	# This class is the ancestor of all the Node classes. It provides	COMMENT
MEDIUM⚡	…n/components/opensource/libxml2/python/libxml2class.py	239	"""This function is DEPRECATED. Use xmlIsBaseChar_ch or	STRING
MEDIUM⚡	…n/components/opensource/libxml2/python/libxml2class.py	245	"""This function is DEPRECATED. Use xmlIsBlank_ch or	STRING
MEDIUM⚡	…n/components/opensource/libxml2/python/libxml2class.py	251	"""This function is DEPRECATED. Use xmlIsChar_ch or xmlIsCharQ	STRING
MEDIUM⚡	…n/components/opensource/libxml2/python/libxml2class.py	257	"""This function is DEPRECATED. Use xmlIsCombiningQ instead """	STRING
MEDIUM⚡	…n/components/opensource/libxml2/python/libxml2class.py	262	"""This function is DEPRECATED. Use xmlIsDigit_ch or	STRING
MEDIUM⚡	…n/components/opensource/libxml2/python/libxml2class.py	268	"""This function is DEPRECATED. Use xmlIsExtender_ch or	STRING
MEDIUM⚡	…n/components/opensource/libxml2/python/libxml2class.py	274	"""This function is DEPRECATED. Use xmlIsIdeographicQ instead """	STRING
MEDIUM⚡	…n/components/opensource/libxml2/python/libxml2class.py	279	"""This function is DEPRECATED. Use xmlIsPubidChar_ch or	STRING
MEDIUM	…n/components/opensource/libxml2/python/libxml2class.py	1110	"""This function is obsolete. Please see xmlURIFromPath in	STRING
MEDIUM	…n/components/opensource/libxml2/python/libxml2class.py	4239	"""This function provides the current index of the parser	STRING
MEDIUM	…n/components/opensource/libxml2/python/libxml2class.py	4341	"""This function is deprecated, we now always process entities	STRING
MEDIUM	…n/components/opensource/libxml2/python/libxml2class.py	5757	"""This function provides the current index of the parser used	STRING
MEDIUM	…7/main/components/opensource/libxml2/python/libxml2.py	234	# This class is the ancestor of all the Node classes. It provides	COMMENT
MEDIUM⚡	…7/main/components/opensource/libxml2/python/libxml2.py	972	"""This function is DEPRECATED. Use xmlIsBaseChar_ch or	STRING
MEDIUM⚡	…7/main/components/opensource/libxml2/python/libxml2.py	978	"""This function is DEPRECATED. Use xmlIsBlank_ch or	STRING
MEDIUM⚡	…7/main/components/opensource/libxml2/python/libxml2.py	984	"""This function is DEPRECATED. Use xmlIsChar_ch or xmlIsCharQ	STRING
MEDIUM⚡	…7/main/components/opensource/libxml2/python/libxml2.py	990	"""This function is DEPRECATED. Use xmlIsCombiningQ instead """	STRING
MEDIUM⚡	…7/main/components/opensource/libxml2/python/libxml2.py	995	"""This function is DEPRECATED. Use xmlIsDigit_ch or	STRING
MEDIUM⚡	…7/main/components/opensource/libxml2/python/libxml2.py	1001	"""This function is DEPRECATED. Use xmlIsExtender_ch or	STRING
MEDIUM⚡	…7/main/components/opensource/libxml2/python/libxml2.py	1007	"""This function is DEPRECATED. Use xmlIsIdeographicQ instead """	STRING
MEDIUM⚡	…7/main/components/opensource/libxml2/python/libxml2.py	1012	"""This function is DEPRECATED. Use xmlIsPubidChar_ch or	STRING
MEDIUM	…7/main/components/opensource/libxml2/python/libxml2.py	1843	"""This function is obsolete. Please see xmlURIFromPath in	STRING
MEDIUM	…7/main/components/opensource/libxml2/python/libxml2.py	4972	"""This function provides the current index of the parser	STRING
MEDIUM	…7/main/components/opensource/libxml2/python/libxml2.py	5074	"""This function is deprecated, we now always process entities	STRING
MEDIUM	…7/main/components/opensource/libxml2/python/libxml2.py	6490	"""This function provides the current index of the parser used	STRING
MEDIUM	…impl87/main/components/opensource/libxml2/xstc/xstc.py	5	# This file is generated from the MS W3c test suite description file.	COMMENT
MEDIUM⚡	…impl87/main/components/opensource/libxml2/doc/index.py	12	# Create the new database xmlsoft	COMMENT
MEDIUM⚡	…impl87/main/components/opensource/libxml2/doc/index.py	14	# Create a database user 'veillard' and give him passord access	COMMENT
MEDIUM	…in/components/opensource/libxml2/doc/examples/index.py	224	## This file is auto-generated by index.py	COMMENT
MEDIUM	…/main/components/opensource/libxml2/win32/configure.js	206	vf.WriteLine("# This file is generated automatically by " + WScript.ScriptName + ".");	CODE
MEDIUM	…s/opensource/router_tools/libnl/python/netlink/core.py	316	# Create a clone which stores the original state to notice	COMMENT
MEDIUM	…ensource/router_tools/libnl/python/examples/nl80211.py	4	# This file is generated using extract.py using pycparser	COMMENT
MEDIUM	…nents/opensource/router_tools/libnl/python/doc/conf.py	6	# This file is execfile()d with the current directory set to its containing dir.	COMMENT
MEDIUM	…source/phy/Serdes146Class/merlin16_shortfin_internal.h	524	* -# This function is called repeatedly with a byte count of 2 with U16 values to dump.	COMMENT
MEDIUM	…source/phy/Serdes146Class/merlin16_shortfin_internal.h	931	* -# This function is called repeatedly with a byte count of 2 with U16 values to store.	COMMENT
MEDIUM	….675x/bootloaders/u-boot-2019.07/tools/binman/ftest.py	89	# Create a temporary directory for input files	COMMENT
MEDIUM	…x/bootloaders/u-boot-2019.07/tools/buildman/control.py	281	# Create a new builder with the selected options.	COMMENT
MEDIUM	…loaders/u-boot-2019.07/tools/buildman/builderthread.py	138	# Create a default result - it will be overwritte by the call to	COMMENT
MEDIUM	…bootloaders/u-boot-2019.07/tools/patman/patchstream.py	463	# Create a backup file if required	COMMENT
MEDIUM	…bcmbca/phy/Serdes146Class/merlin16_shortfin_internal.h	502	* -# This function is called repeatedly with a byte count of 2 with U16 values to dump.	COMMENT
MEDIUM	…bcmbca/phy/Serdes146Class/merlin16_shortfin_internal.h	909	* -# This function is called repeatedly with a byte count of 2 with U16 values to store.	COMMENT
MEDIUM	…x/bootloaders/u-boot-2019.07/test/py/tests/test_fit.py	13	# Define a base ITS which we can adjust using % and a dictionary	COMMENT
MEDIUM	…x/bootloaders/u-boot-2019.07/test/py/tests/test_fit.py	83	# Define a base FDT - currently we don't use anything in this	STRING
MEDIUM	…bootloaders/u-boot-2019.07/test/py/tests/test_vboot.py	154	# Create a fresh .dtb without the public keys	COMMENT
MEDIUM⚡	…bootloaders/u-boot-2019.07/test/py/tests/test_vboot.py	209	# Create an RSA key pair	COMMENT
MEDIUM⚡	…bootloaders/u-boot-2019.07/test/py/tests/test_vboot.py	216	# Create a certificate containing the public key	COMMENT
MEDIUM⚡	…bootloaders/u-boot-2019.07/test/py/tests/test_vboot.py	220	# Create a number kernel image with zeroes	COMMENT
MEDIUM	…aders/u-boot-2019.07/test/py/tests/test_fs/conftest.py	277	# Create a subdirectory.	COMMENT
MEDIUM	…aders/u-boot-2019.07/test/py/tests/test_fs/conftest.py	291	# Create a small file in this image.	COMMENT
1566 more matches not shown…

Unused Imports1756 hits · 1670 pts

Severity	File	Line	Context
LOW	…s/opensource/router_tools/libnl/python/netlink/util.py	11	CODE
LOW	…s/opensource/router_tools/libnl/python/netlink/util.py	13	CODE
LOW	…s/opensource/router_tools/libnl/python/netlink/util.py	16	CODE
LOW	…s/opensource/router_tools/libnl/python/netlink/core.py	30	CODE
LOW	…source/router_tools/libnl/python/netlink/route/link.py	37	CODE
LOW	…ensource/router_tools/libnl/python/netlink/route/tc.py	4	CODE
LOW	…rce/router_tools/libnl/python/netlink/route/address.py	8	CODE
LOW	…e/router_tools/libnl/python/netlink/route/qdisc/htb.py	9	CODE
LOW	…/router_tools/libnl/python/netlink/route/links/inet.py	9	CODE
LOW	…/router_tools/libnl/python/netlink/route/links/vlan.py	9	CODE
LOW	…router_tools/libnl/python/netlink/route/links/dummy.py	8	CODE
LOW	…nents/opensource/router_tools/libnl/python/doc/conf.py	14	CODE
LOW	…nents/opensource/router_tools/libnl/python/doc/conf.py	14	CODE
LOW	…/opensource/router_tools/hostapd/hostapd/wps-ap-nfc.py	10	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_hs20_filter.py	8	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_hs20_filter.py	17	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	13	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	15	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	17	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	20	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_nfc_p2p.py	8	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_wep.py	9	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_wep.py	14	CODE
LOW	…nsource/router_tools/hostapd/tests/hwsim/test_ap_ft.py	21	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_tdls.py	14	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_tdls.py	15	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_tdls.py	17	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_suite_b.py	7	CODE
LOW	…/opensource/router_tools/hostapd/tests/hwsim/tshark.py	15	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_bgscan.py	7	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	16	CODE
LOW	…router_tools/hostapd/tests/hwsim/test_p2p_discovery.py	15	CODE
LOW	…urce/router_tools/hostapd/tests/hwsim/test_ap_mixed.py	12	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_mbo.py	17	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_pmf.py	16	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_hapd_ctrl.py	12	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_hapd_ctrl.py	13	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_ieee8021x.py	16	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/wlantest.py	13	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	38	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	44	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	29	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	35	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	35	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	36	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_pasn.py	8	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_pasn.py	10	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_pasn.py	13	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_pasn.py	14	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_pasn.py	15	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_pasn.py	20	CODE
LOW	…ce/router_tools/hostapd/tests/hwsim/test_ap_dynamic.py	16	CODE
LOW	…opensource/router_tools/hostapd/tests/hwsim/test_he.py	15	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_radius.py	21	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_psk.py	16	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_psk.py	22	CODE
LOW	…ce/router_tools/hostapd/tests/hwsim/test_p2p_autogo.py	19	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	22	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_hostapd_oom.py	13	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_macsec.py	18	CODE
1696 more matches not shown…

Excessive Try-Catch Wrapping1493 hits · 1554 pts

Severity	File	Line	Snippet	Context
LOW	…opensource/router_tools/libnl/python/examples/iface.py	51	except Exception as e:	CODE
LOW	…opensource/router_tools/libnl/python/examples/iface.py	90	except Exception as e:	CODE
MEDIUM	…opensource/router_tools/libnl/python/examples/iface.py	11	def msg_handler(m, a):	CODE
LOW	…opensource/router_tools/libnl/python/examples/wiphy.py	100	except Exception as e:	CODE
LOW	…opensource/router_tools/libnl/python/examples/wiphy.py	138	except Exception as e:	CODE
MEDIUM	…opensource/router_tools/libnl/python/examples/wiphy.py	64	def msg_handler(m, a):	CODE
LOW	…/opensource/router_tools/hostapd/hostapd/wps-ap-nfc.py	57	except Exception as e:	CODE
LOW	…/opensource/router_tools/hostapd/hostapd/wps-ap-nfc.py	137	except Exception as e:	CODE
LOW	…/opensource/router_tools/hostapd/hostapd/wps-ap-nfc.py	164	except Exception as e:	CODE
LOW	…/opensource/router_tools/hostapd/hostapd/wps-ap-nfc.py	239	except Exception as e:	CODE
LOW	…/opensource/router_tools/hostapd/hostapd/wps-ap-nfc.py	327	except Exception as e:	CODE
LOW	…nsource/router_tools/hostapd/tests/hwsim/test_ap_ft.py	567	except Exception as e:	CODE
LOW	…nsource/router_tools/hostapd/tests/hwsim/test_ap_ft.py	703	except Exception as e:	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_tdls.py	446	except Exception as e:	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_tdls.py	490	except Exception as e:	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_tdls.py	535	except Exception as e:	CODE
LOW	…/opensource/router_tools/hostapd/tests/hwsim/tshark.py	44	except Exception as e:	CODE
LOW	…/opensource/router_tools/hostapd/tests/hwsim/tshark.py	116	except Exception as e:	CODE
MEDIUM	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	535	def run_ap_vht160_no_dfs(dev, apdev, channel, ht_capab):	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	74	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	118	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	146	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	203	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	232	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	260	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	417	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	490	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	569	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	604	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	677	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	714	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	773	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	1076	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	1108	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	1152	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	1213	except Exception as e:	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_mbo.py	537	except Exception as e:	CODE
LOW⚡	…source/router_tools/hostapd/tests/hwsim/test_ap_pmf.py	1122	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_pmf.py	70	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_pmf.py	231	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_pmf.py	1075	except Exception as e:	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/wlantest.py	146	except Exception as e:	CODE
MEDIUM	…pensource/router_tools/hostapd/tests/hwsim/wlantest.py	143	def get_bss_counter(self, field, bssid):	CODE
LOW⚡	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3506	except Exception as e:	CODE
LOW⚡	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3514	except Exception as e:	CODE
LOW⚡	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3522	except Exception as e:	CODE
LOW⚡	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3530	except Exception as e:	CODE
LOW⚡	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3626	except Exception as e:	CODE
LOW⚡	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3636	except Exception as e:	CODE
LOW⚡	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3643	except Exception as e:	CODE
LOW⚡	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	4394	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3552	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3567	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	3580	except Exception as e:	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	5319	except Exception as e:	STRING
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_pasn.py	44	except Exception as e:	CODE
MEDIUM	…ensource/router_tools/hostapd/tests/hwsim/test_pasn.py	41	def start_pasn_ap(apdev, params):	CODE
LOW	…ce/router_tools/hostapd/tests/hwsim/test_ap_dynamic.py	252	except Exception as e:	CODE
LOW	…ce/router_tools/hostapd/tests/hwsim/test_ap_dynamic.py	523	except Exception as e:	CODE
MEDIUM	…opensource/router_tools/hostapd/tests/hwsim/test_he.py	621	def run_ap_he160_no_dfs(dev, apdev, channel, ht_capab):	CODE
1433 more matches not shown…

AI Slop Vocabulary580 hits · 1473 pts

Severity	File	Line	Snippet	Context
LOW	….rt-ax86u_pro/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	215	# we must have a defaultValue, so just set to NULL	COMMENT
LOW	….rt-ax86u_pro/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	362	# is all caps, e.g. IGD. If so, just return that.	COMMENT
LOW	….rt-ax86u_pro/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	1368	# we already recorded this leaf profile, just return.	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	389	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	3777	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	7589	# This code stresses the "libraries are programs" paradigm to its	COMMENT
MEDIUM	…l87/main/components/opensource/libxml2/doc/xmldtd.html	79	<code>#FIXED</code> if it is the only allowed).</p><p>Notes:</p><ul><li>Usually the attributes pertaining to a given ele	CODE
MEDIUM	…ponents/opensource/jquerylib/jquery.tablesorter.min.js	1740	// fallback to natural sort since it is more robust	COMMENT
MEDIUM	…ce/router_tools/hostapd/tests/hwsim/test_ap_ciphers.py	1120	# Verify that broadcast robust management frames are dropped.	COMMENT
MEDIUM	…ce/router_tools/hostapd/tests/hwsim/test_ap_ciphers.py	1131	# Verify thar unicast robust management frames go through.	COMMENT
MEDIUM	…ensource/router_tools/hostapd/tests/hwsim/test_scan.py	507	# Allow multiple attempts to be more robust under heavy CPU load that can	COMMENT
MEDIUM	…ource/router_tools/hostapd/tests/hwsim/test_ap_hs20.py	2630	# of HT Control field use a non-robust Action Category value.	COMMENT
MEDIUM	…er_tools/wpa_supplicant/tests/hwsim/test_ap_ciphers.py	1120	# Verify that broadcast robust management frames are dropped.	COMMENT
MEDIUM	…er_tools/wpa_supplicant/tests/hwsim/test_ap_ciphers.py	1131	# Verify thar unicast robust management frames go through.	COMMENT
MEDIUM	…e/router_tools/wpa_supplicant/tests/hwsim/test_scan.py	507	# Allow multiple attempts to be more robust under heavy CPU load that can	COMMENT
MEDIUM	…outer_tools/wpa_supplicant/tests/hwsim/test_ap_hs20.py	2630	# of HT Control field use a non-robust Action Category value.	COMMENT
MEDIUM	…x/bcmdrivers/opensource/phy/Serdes146Class/M1_merlin.h	130	//x leverage from the Figure 21 PMD Setup 400MHz (div2 = 0); also refer to ANA_SFI1X_TS16FFC_S6_spec.pdf	COMMENT
MEDIUM	…x/bcmdrivers/opensource/phy/Serdes146Class/M1_merlin.h	168	//x leverage from the Figure 21 PMD Setup 400MHz (div2 = 0); also refer to ANA_SFI1X_TS16FFC_S6_spec.pdf	COMMENT
MEDIUM	…x/bcmdrivers/opensource/phy/Serdes146Class/M1_merlin.h	190	//x leverage from the Figure 21 PMD Setup 400MHz (div2 = 0); also refer to ANA_SFI1X_TS16FFC_S6_spec.pdf	COMMENT
MEDIUM	…x/bcmdrivers/opensource/phy/Serdes146Class/M1_merlin.h	365	//x leverage from figure 28 Force Speed 1G (blackfin)	COMMENT
LOW	…p.gt-axe16000/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	215	# we must have a defaultValue, so just set to NULL	COMMENT
LOW	…p.gt-axe16000/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	362	# is all caps, e.g. IGD. If so, just return that.	COMMENT
LOW	…p.gt-axe16000/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	1368	# we already recorded this leaf profile, just return.	COMMENT
LOW	…t-ax11000_pro/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	215	# we must have a defaultValue, so just set to NULL	COMMENT
LOW	…t-ax11000_pro/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	362	# is all caps, e.g. IGD. If so, just return that.	COMMENT
LOW	…t-ax11000_pro/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	1368	# we already recorded this leaf profile, just return.	COMMENT
LOW	…r-sysdep.xt12/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	215	# we must have a defaultValue, so just set to NULL	COMMENT
LOW	…r-sysdep.xt12/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	362	# is all caps, e.g. IGD. If so, just return that.	COMMENT
LOW	…r-sysdep.xt12/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	1368	# we already recorded this leaf profile, just return.	COMMENT
LOW	….rt-ax88u_pro/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	215	# we must have a defaultValue, so just set to NULL	COMMENT
LOW	….rt-ax88u_pro/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	362	# is all caps, e.g. IGD. If so, just return that.	COMMENT
LOW	….rt-ax88u_pro/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	1368	# we already recorded this leaf profile, just return.	COMMENT
LOW	….675x/bootloaders/u-boot-2019.07/tools/patman/tools.py	213	# If not found, just return the standard, unchanged path	COMMENT
LOW	…675x/bootloaders/u-boot-2019.07/tools/patman/series.py	72	# Otherwise just set the value	COMMENT
MEDIUM	…9.07/drivers/net/bcmbca/phy/Serdes146Class/M1_merlin.h	110	//x leverage from the Figure 21 PMD Setup 400MHz (div2 = 0); also refer to ANA_SFI1X_TS16FFC_S6_spec.pdf	COMMENT
MEDIUM	…9.07/drivers/net/bcmbca/phy/Serdes146Class/M1_merlin.h	148	//x leverage from the Figure 21 PMD Setup 400MHz (div2 = 0); also refer to ANA_SFI1X_TS16FFC_S6_spec.pdf	COMMENT
MEDIUM	…9.07/drivers/net/bcmbca/phy/Serdes146Class/M1_merlin.h	170	//x leverage from the Figure 21 PMD Setup 400MHz (div2 = 0); also refer to ANA_SFI1X_TS16FFC_S6_spec.pdf	COMMENT
MEDIUM	…9.07/drivers/net/bcmbca/phy/Serdes146Class/M1_merlin.h	345	//x leverage from figure 28 Force Speed 1G (blackfin)	COMMENT
MEDIUM	…oaders/u-boot-2019.07/scripts/dtc/update-dtc-source.sh	21	# aren't a big deal. If anyone is interested in making it more robust, the	COMMENT
MEDIUM	…75x/bootloaders/u-boot-2019.07/doc/sphinx/kerneldoc.py	68	# FIXME: make this nicer and more robust against errors	COMMENT
LOW	…dep.gt-ax6000/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	215	# we must have a defaultValue, so just set to NULL	COMMENT
LOW	…dep.gt-ax6000/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	362	# is all caps, e.g. IGD. If so, just return that.	COMMENT
LOW	…dep.gt-ax6000/wlcsm/wlcsm_nvram/generate_from_dm_wl.pl	1368	# we already recorded this leaf profile, just return.	COMMENT
MEDIUM	…5x/kernel/linux-4.19/Documentation/sphinx/kerneldoc.py	80	# FIXME: make this nicer and more robust against errors	COMMENT
LOW	…rnel/linux-4.19/tools/testing/selftests/zram/zram02.sh	35	# memparse() which supports mem suffixes. So here we just use	COMMENT
LOW	…rnel/linux-4.19/tools/testing/selftests/zram/zram01.sh	36	# memparse() which supports mem suffixes. So here we just use	COMMENT
MEDIUM	…l/linux-4.19/tools/arch/sparc/include/asm/barrier_64.h	8	* #51. Essentially, if a memory barrier occurs soon after a mispredicted	COMMENT
MEDIUM	…/net/wireguard/crypto/zinc/poly1305/poly1305-mips64.pl	37	# The return value is placed in $a0. Following coding rules facilitate	COMMENT
MEDIUM	…4.19/drivers/net/ethernet/netronome/nfp/nfp_net_ctrl.h	269	#define NFP_NET_BPF_CAP_RELO (1 << 0) /* seamless reload */	COMMENT
MEDIUM	…/kernel/linux-4.19/drivers/usb/gadget/udc/pxa25x_udc.c	641	// TODO experiment: how robust can fifo mode tweaking be?	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/include/sound/emu10k1.h	874	#define A_SPDIF_RATE_MASK 0x000000e0 /* Any other values for rates, just use 48000 */	COMMENT
LOW	…hnd.675x/kernel/linux-4.19/samples/pktgen/functions.sh	116	# Trick so, program can be run as normal user, will just use "sudo"	COMMENT
MEDIUM	…/kernel/linux-4.19/arch/sparc/include/asm/barrier_64.h	6	* #51. Essentially, if a memory barrier occurs soon after a mispredicted	COMMENT
LOW	…4axhnd.675x/kernel/linux-4.19/scripts/check_extable.sh	26	# __ex_table relocation to your new section is expected), simply add your	COMMENT
MEDIUM	…75x/kernel/linux-4.19/scripts/dtc/update-dtc-source.sh	21	# aren't a big deal. If anyone is interested in making it more robust, the	COMMENT
MEDIUM	…xhnd.675x/kernel/linux-4.19/fs/xfs/libxfs/xfs_shared.h	65	#define XFS_TRANS_NO_WRITECOUNT 0x40 /* do not elevate SB writecount */	COMMENT
MEDIUM	…rt-5.04axhnd.675x/kernel/linux-4.19/fs/affs/amigaffs.h	142	#define FIBF_OWNER 0x000F /* Bits pertaining to owner */	COMMENT
MEDIUM	…wl/impl69/main/components/opensource/libxml2/ltmain.sh	389	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	…wl/impl69/main/components/opensource/libxml2/ltmain.sh	3777	# Sed substitution that helps us do robust quoting. It backslashifies	COMMENT
MEDIUM	…wl/impl69/main/components/opensource/libxml2/ltmain.sh	7589	# This code stresses the "libraries are programs" paradigm to its	COMMENT
520 more matches not shown…

Cross-Language Confusion237 hits · 1332 pts

Severity	File	Line	Snippet	Context
HIGH	…l87/main/components/opensource/libxml2/doc/apibuild.py	1328	self.lexer.push(token)	CODE
HIGH	…l87/main/components/opensource/libxml2/doc/apibuild.py	1346	self.lexer.push(token)	CODE
HIGH	…l87/main/components/opensource/libxml2/doc/apibuild.py	1400	self.lexer.push(token)	CODE
HIGH	…l87/main/components/opensource/libxml2/doc/apibuild.py	1429	self.lexer.push(token)	CODE
HIGH	…in/components/opensource/libxml2/doc/examples/index.py	243	cd $(srcdir) && xsltproc examples.xsl examples.xml && echo "Rebuilt web page"	CODE
HIGH	…in/components/opensource/libxml2/doc/examples/index.py	252	test -f Makefile.am \|\| rm -f test?.xml	CODE
HIGH	…in/components/opensource/libxml2/doc/examples/index.py	270	Makefile = Makefile + "\ttest -f Makefile.am \|\| test -f test1.xml \|\| $(LN_S) $(srcdir)/test?.xml .\n"	STRING
HIGH	…source/router_tools/libnl/python/netlink/route/link.py	162	return false	CODE
HIGH⚡	…pensource/router_tools/hostapd/tests/hwsim/test_mbo.py	241	filter = 'wlan.fc.type == 0 && wlan.fc.type_subtype == 0x00 && frame.time > "' + timestamp.rstrip() + '"'	CODE
HIGH	…pensource/router_tools/hostapd/tests/hwsim/test_mbo.py	218	"wlan.fc.type == 0 && wlan.fc.type_subtype == 0x00",	CODE
HIGH	…pensource/router_tools/hostapd/tests/hwsim/test_gas.py	173	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…pensource/router_tools/hostapd/tests/hwsim/test_gas.py	1327	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…pensource/router_tools/hostapd/tests/hwsim/test_gas.py	1379	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…pensource/router_tools/hostapd/tests/hwsim/test_gas.py	1418	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…pensource/router_tools/hostapd/tests/hwsim/test_gas.py	1466	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…source/router_tools/hostapd/tests/hwsim/test_kernel.py	120	"wlan.sa == %s && wlan.fc.type_subtype == 0x0d" % addr,	CODE
HIGH	…rce/router_tools/hostapd/tests/hwsim/test_wpas_mesh.py	1422	filt = "wlan.sa==%s && wlan_mgt.fixed.mesh_addr5==%s" % (addr2,	CODE
HIGH⚡	…ce/router_tools/wpa_supplicant/tests/hwsim/test_mbo.py	241	filter = 'wlan.fc.type == 0 && wlan.fc.type_subtype == 0x00 && frame.time > "' + timestamp.rstrip() + '"'	CODE
HIGH	…ce/router_tools/wpa_supplicant/tests/hwsim/test_mbo.py	218	"wlan.fc.type == 0 && wlan.fc.type_subtype == 0x00",	CODE
HIGH	…ce/router_tools/wpa_supplicant/tests/hwsim/test_gas.py	173	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…ce/router_tools/wpa_supplicant/tests/hwsim/test_gas.py	1327	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…ce/router_tools/wpa_supplicant/tests/hwsim/test_gas.py	1379	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…ce/router_tools/wpa_supplicant/tests/hwsim/test_gas.py	1418	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…ce/router_tools/wpa_supplicant/tests/hwsim/test_gas.py	1466	"wlan_mgt.fixed.category_code == 4 && (wlan_mgt.fixed.publicact == 0x0a \|\| wlan_mgt.fixed.publicact	CODE
HIGH	…router_tools/wpa_supplicant/tests/hwsim/test_kernel.py	120	"wlan.sa == %s && wlan.fc.type_subtype == 0x0d" % addr,	CODE
HIGH	…ter_tools/wpa_supplicant/tests/hwsim/test_wpas_mesh.py	1422	filt = "wlan.sa==%s && wlan_mgt.fixed.mesh_addr5==%s" % (addr2,	CODE
HIGH	…ootloaders/u-boot-2019.07/tools/buildman/kconfiglib.py	547	has the value "y", then config.eval("y && (FOO \|\| BAR)") => "y"	STRING
HIGH	…ootloaders/u-boot-2019.07/tools/buildman/kconfiglib.py	1119	kconfiglib.AND. If there is only one operand (i.e., no && or \|\|), then	STRING
HIGH	…ootloaders/u-boot-2019.07/tools/buildman/kconfiglib.py	1135	'm && MODULES' -- see parse_val_and_cond().	STRING
HIGH	…ootloaders/u-boot-2019.07/tools/buildman/kconfiglib.py	1904	default BAR \|\| FOO *	STRING
HIGH	…ootloaders/u-boot-2019.07/tools/buildman/kconfiglib.py	2213	prompt "foo" if A && B	STRING
HIGH	…loaders/u-boot-2019.07/tools/patman/cros_subprocess.py	302	cmd = 'echo fred >/dev/stderr && false \|\| echo bad'	CODE
HIGH	…loaders/u-boot-2019.07/tools/patman/cros_subprocess.py	302	cmd = 'echo fred >/dev/stderr && false \|\| echo bad'	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	208	output = u_boot_console.run_command('fpga load %x %x $filesize && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	218	output = u_boot_console.run_command('fpga load %x %x $filesize && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	225	output = u_boot_console.run_command('fpga loadp %x %x $filesize && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	234	output = u_boot_console.run_command('fpga loadb %x %x $filesize && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	244	output = u_boot_console.run_command('fpga loadb %x %x $filesize && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	251	output = u_boot_console.run_command('fpga loadbp %x %x $filesize && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	285	output = u_boot_console.run_command('fpga loadmk %x %x && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	302	output = u_boot_console.run_command('fpga loadmk %x && echo %s' % (addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	319	output = u_boot_console.run_command('fpga loadmk %x && echo %s' % (dev, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	337	output = u_boot_console.run_command('fpga loadmk && echo %s' % (expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	353	output = u_boot_console.run_command('fpga loadmk %x %x && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	366	output = u_boot_console.run_command('fpga loadmk %x %x:fpga && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	379	output = u_boot_console.run_command('fpga loadmk %x %x:fpga && echo %s' % (dev, addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	394	output = u_boot_console.run_command('fpga loadmk %x:fpga && echo %s' % (addr, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	410	output = u_boot_console.run_command('fpga loadmk %x && echo %s' % (dev, expected_text))	CODE
HIGH⚡	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	427	output = u_boot_console.run_command('fpga loadmk && echo %s' % (expected_text))	CODE
HIGH	…/bootloaders/u-boot-2019.07/test/py/tests/test_fpga.py	502	output = u_boot_console.run_command('fpga loadfs %x %x %x %x %s && echo %s' % (dev, addr, bit_size, block_size, bit,	CODE
HIGH	…nel/linux-4.19/Documentation/target/tcm_mod_builder.py	577	buf += " depends on TARGET_CORE && CONFIGFS_FS\n"	CODE
HIGH	…x/kernel/linux-4.19/tools/power/pm-graph/sleepgraph.py	4226	' if((cpu >= 0 && dname.match("CPU_O[NF]\\\["+cpu+"\\\]")) \|\|\n'\	CODE
HIGH	…x/kernel/linux-4.19/tools/power/pm-graph/sleepgraph.py	4263	' if(total[1] > 0 && total[2] > 0)\n'\	CODE
HIGH	…x/kernel/linux-4.19/tools/power/pm-graph/sleepgraph.py	4288	' if((cpu >= 0 && dname.match("CPU_O[NF]\\\["+cpu+"\\\]")) \|\|\n'\	CODE
HIGH	…x/kernel/linux-4.19/tools/power/pm-graph/sleepgraph.py	4439	' } else if(i > idx1 && i <= idx2) {\n'\	CODE
HIGH	…x/kernel/linux-4.19/tools/power/pm-graph/sleepgraph.py	4467	' document.onmousemove = null;\n'\	CODE
HIGH	…x/kernel/linux-4.19/tools/power/pm-graph/sleepgraph.py	4471	' if(c != 42 && c != 43 && c != 45) return;\n'\	CODE
HIGH	….675x/kernel/linux-4.19/scripts/checkkconfigsymbols.py	177	undefined, defined = check_symbols(args.ignore)	CODE
HIGH	….675x/kernel/linux-4.19/scripts/checkkconfigsymbols.py	180	for symbol in sorted(undefined):	CODE
HIGH	….675x/kernel/linux-4.19/scripts/checkkconfigsymbols.py	371	return undefined, defined_symbols	CODE
177 more matches not shown…

Redundant / Tautological Comments792 hits · 1043 pts

Severity	File	Line	Snippet	Context
LOW	….04axhnd.675x/targets/fs.src/rom/etc/get_rootfs_dev.sh	22	# Set boot_dev to empty string to get from bootline	COMMENT
LOW	….04axhnd.675x/targets/fs.src/rom/etc/get_rootfs_dev.sh	33	# Check if non-block ubi rootfs	COMMENT
LOW	…-sysdep.rt-ax86u_pro/bdmf_shell/scripts/runner_dump.sh	136	## Check if dump enabled	COMMENT
LOW	…-sysdep.rt-ax86u_pro/bdmf_shell/scripts/runner_dump.sh	155	## Check if dump enabled	COMMENT
LOW	…r-sysdep.rt-ax86u_pro/wlan/scripts/bcm-wlan-drivers.sh	62	# Check if PWLCS is enabled or not	COMMENT
LOW	…r-sysdep.rt-ax86u_pro/wlan/scripts/bcm-wlan-drivers.sh	122	# Check if card is a bad card	COMMENT
LOW	…d.675x/router-sysdep.rt-ax86u_pro/wlan/scripts/wifi.sh	59	# Check if we need a system reboot (default no)	COMMENT
LOW	…d.675x/router-sysdep.rt-ax86u_pro/wlan/scripts/wifi.sh	185	#Check if any interface powered down	COMMENT
LOW	…outer-sysdep.rt-ax86u_pro/wlan/nvram/scripts/hndmfg.sh	506	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…ter-sysdep.rt-ax86u_pro/wlan/nvram/scripts/hndnvram.sh	118	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…ter-sysdep.rt-ax86u_pro/wlan/nvram/scripts/hndnvram.sh	145	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…router-sysdep.rt-ax86u_pro/wlan/nvram/scripts/hnddm.sh	92	# Check if the symbolic link to the emmc misc partition exists	COMMENT
LOW	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	2524	# Check if any of the arguments is a wrapper script.	COMMENT
LOW	…wl/impl87/main/components/opensource/libxml2/ltmain.sh	8288	# Loop over the list of objects to be linked.	COMMENT
LOW	…7/main/components/opensource/libpcap_winpcap/runlex.sh	52	# Add this to the list of flags.	COMMENT
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_psk.py	1243	# Check if any more EAPOL-Key frames are seen. If the second 4-way handshake	COMMENT
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_wnm.py	319	# Check if OCV succeeded or failed	COMMENT
LOW	…router_tools/wpa_supplicant/tests/hwsim/test_ap_psk.py	1243	# Check if any more EAPOL-Key frames are seen. If the second 4-way handshake	COMMENT
LOW	…ce/router_tools/wpa_supplicant/tests/hwsim/test_wnm.py	319	# Check if OCV succeeded or failed	COMMENT
LOW	…/net/wl/impl87/main/components/apps/utils/mapgetcfg.sh	57	# Check if it is a wireless interface or not	COMMENT
LOW	…r-sysdep.gt-axe16000/bdmf_shell/scripts/runner_dump.sh	136	## Check if dump enabled	COMMENT
LOW	…r-sysdep.gt-axe16000/bdmf_shell/scripts/runner_dump.sh	155	## Check if dump enabled	COMMENT
LOW	…er-sysdep.gt-axe16000/wlan/scripts/bcm-wlan-drivers.sh	62	# Check if PWLCS is enabled or not	COMMENT
LOW	…er-sysdep.gt-axe16000/wlan/scripts/bcm-wlan-drivers.sh	122	# Check if card is a bad card	COMMENT
LOW	…nd.675x/router-sysdep.gt-axe16000/wlan/scripts/wifi.sh	59	# Check if we need a system reboot (default no)	COMMENT
LOW	…nd.675x/router-sysdep.gt-axe16000/wlan/scripts/wifi.sh	185	#Check if any interface powered down	COMMENT
LOW	…router-sysdep.gt-axe16000/wlan/nvram/scripts/hndmfg.sh	506	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…uter-sysdep.gt-axe16000/wlan/nvram/scripts/hndnvram.sh	118	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…uter-sysdep.gt-axe16000/wlan/nvram/scripts/hndnvram.sh	145	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…/router-sysdep.gt-axe16000/wlan/nvram/scripts/hnddm.sh	92	# Check if the symbolic link to the emmc misc partition exists	COMMENT
LOW	…ysdep.gt-ax11000_pro/bdmf_shell/scripts/runner_dump.sh	136	## Check if dump enabled	COMMENT
LOW	…ysdep.gt-ax11000_pro/bdmf_shell/scripts/runner_dump.sh	155	## Check if dump enabled	COMMENT
LOW	…sysdep.gt-ax11000_pro/wlan/scripts/bcm-wlan-drivers.sh	62	# Check if PWLCS is enabled or not	COMMENT
LOW	…sysdep.gt-ax11000_pro/wlan/scripts/bcm-wlan-drivers.sh	122	# Check if card is a bad card	COMMENT
LOW	…675x/router-sysdep.gt-ax11000_pro/wlan/scripts/wifi.sh	59	# Check if we need a system reboot (default no)	COMMENT
LOW	…675x/router-sysdep.gt-ax11000_pro/wlan/scripts/wifi.sh	185	#Check if any interface powered down	COMMENT
LOW	…ter-sysdep.gt-ax11000_pro/wlan/nvram/scripts/hndmfg.sh	506	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…r-sysdep.gt-ax11000_pro/wlan/nvram/scripts/hndnvram.sh	118	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…r-sysdep.gt-ax11000_pro/wlan/nvram/scripts/hndnvram.sh	145	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…uter-sysdep.gt-ax11000_pro/wlan/nvram/scripts/hnddm.sh	92	# Check if the symbolic link to the emmc misc partition exists	COMMENT
LOW	…x/router-sysdep.xt12/bdmf_shell/scripts/runner_dump.sh	136	## Check if dump enabled	COMMENT
LOW	…x/router-sysdep.xt12/bdmf_shell/scripts/runner_dump.sh	155	## Check if dump enabled	COMMENT
LOW	…5x/router-sysdep.xt12/wlan/scripts/bcm-wlan-drivers.sh	62	# Check if PWLCS is enabled or not	COMMENT
LOW	…5x/router-sysdep.xt12/wlan/scripts/bcm-wlan-drivers.sh	122	# Check if card is a bad card	COMMENT
LOW	…5.04axhnd.675x/router-sysdep.xt12/wlan/scripts/wifi.sh	59	# Check if we need a system reboot (default no)	COMMENT
LOW	…5.04axhnd.675x/router-sysdep.xt12/wlan/scripts/wifi.sh	185	#Check if any interface powered down	COMMENT
LOW	…d.675x/router-sysdep.xt12/wlan/nvram/scripts/hndmfg.sh	506	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…675x/router-sysdep.xt12/wlan/nvram/scripts/hndnvram.sh	118	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…675x/router-sysdep.xt12/wlan/nvram/scripts/hndnvram.sh	145	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…nd.675x/router-sysdep.xt12/wlan/nvram/scripts/hnddm.sh	92	# Check if the symbolic link to the emmc misc partition exists	COMMENT
LOW	…-sysdep.rt-ax88u_pro/bdmf_shell/scripts/runner_dump.sh	136	## Check if dump enabled	COMMENT
LOW	…-sysdep.rt-ax88u_pro/bdmf_shell/scripts/runner_dump.sh	155	## Check if dump enabled	COMMENT
LOW	…r-sysdep.rt-ax88u_pro/wlan/scripts/bcm-wlan-drivers.sh	62	# Check if PWLCS is enabled or not	COMMENT
LOW	…r-sysdep.rt-ax88u_pro/wlan/scripts/bcm-wlan-drivers.sh	122	# Check if card is a bad card	COMMENT
LOW	…d.675x/router-sysdep.rt-ax88u_pro/wlan/scripts/wifi.sh	59	# Check if we need a system reboot (default no)	COMMENT
LOW	…d.675x/router-sysdep.rt-ax88u_pro/wlan/scripts/wifi.sh	185	#Check if any interface powered down	COMMENT
LOW	…outer-sysdep.rt-ax88u_pro/wlan/nvram/scripts/hndmfg.sh	506	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…ter-sysdep.rt-ax88u_pro/wlan/nvram/scripts/hndnvram.sh	118	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…ter-sysdep.rt-ax88u_pro/wlan/nvram/scripts/hndnvram.sh	145	# Check if the symbolic link to the emmc misc1 partition exists	COMMENT
LOW	…router-sysdep.rt-ax88u_pro/wlan/nvram/scripts/hnddm.sh	92	# Check if the symbolic link to the emmc misc partition exists	COMMENT
732 more matches not shown…

Slop Phrases569 hits · 1024 pts

Severity	File	Line	Snippet	Context
LOW	…rivers/broadcom/net/wl/impl87/sys/src/shared/siutils.c	5102	/* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */	COMMENT
LOW	…rivers/broadcom/net/wl/impl87/sys/src/shared/sbutils.c	1062	/* don't forget to clear the initiator reject bit */	COMMENT
LOW	…impl87/main/components/opensource/libxml2/doc/index.py	35	# On the Apache configuration, make sure you have php support enabled	COMMENT
MEDIUM	…87/main/components/opensource/libxml2/doc/library.html	38	int terminate);</pre><p>and here is a simple example showing how to use the int	CODE
LOW	…impl87/main/components/opensource/libxml2/doc/xml.html	521	<li>And don't forget to look at the <a	CODE
MEDIUM	…impl87/main/components/opensource/libxml2/doc/xml.html	4995	<p>and here is a simple example showing how to use the interface:</p>	CODE
LOW	…mpl87/main/components/opensource/libxml2/doc/docs.html	32	<li>And don't forget to look at the <a href="http://mail.gnome.org/archives/xml/">mailing-list archive</a>.</li>	CODE
LOW	…n/components/opensource/libxml2/doc/examples/reader3.c	98	* don't forget to free up the doc	COMMENT
MEDIUM	…/main/components/opensource/libxml2/doc/examples/io2.c	34	* for demonstration purposes.	COMMENT
LOW	…/impl87/main/components/opensource/jsonc/json_object.h	252	* ownership through json_object_get (& don't forget to do a json_object_put	COMMENT
LOW	…ensource/jsonc/installbin/include/json-c/json_object.h	252	* ownership through json_object_get (& don't forget to do a json_object_put	COMMENT
LOW	…ponents/opensource/jsonc/doc/html/json__object_8h.html	1377	<p><em>No</em> reference counts will be changed. There is no need to manually adjust reference counts through the json_o	CODE
LOW	…ivers/broadcom/net/wl/impl87/main/src/shared/siutils.c	5102	/* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */	COMMENT
LOW	…ivers/broadcom/net/wl/impl87/main/src/shared/sbutils.c	1062	/* don't forget to clear the initiator reject bit */	COMMENT
LOW	…ers/u-boot-2019.07/drivers/net/fsl-mc/dpio/qbman_sys.h	267	* the power-on state. (Ie. don't forget to reset portals when they are	COMMENT
LOW	release/src-rt-5.04axhnd.675x/hostTools/PerlLib/JSON.pm	1537	if you need this capability (but don't forget to explain why it's needed	CODE
MEDIUM	…rt-5.04axhnd.675x/hostTools/PerlLib/JSON/backportPP.pm	959	my $a = $_[0] \|\| []; # you can use this code to use another array ref object.	CODE
MEDIUM	…rt-5.04axhnd.675x/hostTools/PerlLib/JSON/backportPP.pm	1039	my $o = $_[0] \|\| {}; # you can use this code to use another hash ref object.	CODE
MEDIUM	…nel/linux-4.19/Documentation/sound/cards/multisound.sh	82	# you can use isapnptools. These are described briefly here.	COMMENT
MEDIUM	…nel/linux-4.19/Documentation/sound/cards/multisound.sh	84	# pinnaclecfg is not required; you can use the snd-msnd-pinnacle module	COMMENT
MEDIUM	…nel/linux-4.19/Documentation/sound/cards/multisound.sh	192	# -- OR you can use the following sequence without pinnaclecfg in non-PnP mode:	COMMENT
MEDIUM	…nel/linux-4.19/Documentation/sound/cards/multisound.sh	256	# trouble, you can try the setdigital.c program	COMMENT
MEDIUM	…nel/linux-4.19/Documentation/sound/cards/multisound.sh	268	# When the Pinnacle is in non-PnP mode, you can use the following	COMMENT
MEDIUM	…nel/linux-4.19/Documentation/sound/cards/multisound.sh	349	# want to set it as the input source, you can use this program if you	COMMENT
LOW	…nel/linux-4.19/Documentation/sound/cards/multisound.sh	218	# WARNING--probing isn't supported so try to make sure you have the	COMMENT
LOW	…5x/kernel/linux-4.19/tools/include/uapi/sound/asound.h	114	/* Don't forget to change the following: */	COMMENT
LOW	…5x/kernel/linux-4.19/tools/include/uapi/sound/asound.h	166	/* Don't forget to change the following: */	COMMENT
LOW	…5x/kernel/linux-4.19/tools/include/uapi/sound/asound.h	173	/* Don't forget to change the following: */	COMMENT
MEDIUM	…rnel/linux-4.19/tools/testing/selftests/zram/zram02.sh	31	# or you can use mem suffixes. But in some old kernels, mem	COMMENT
MEDIUM	…rnel/linux-4.19/tools/testing/selftests/zram/zram01.sh	32	# or you can use mem suffixes. But in some old kernels, mem	COMMENT
MEDIUM	…kernel/linux-4.19/tools/testing/ktest/config-bisect.pl	319	# It returns B's config values, but you can use A to see what A was.	COMMENT
LOW	…x/kernel/linux-4.19/drivers/misc/lattice-ecp3-config.c	184	* Don't forget to release the firmware again	COMMENT
MEDIUM	…d.675x/kernel/linux-4.19/drivers/mmc/host/usdhi6rol0.c	1847	/* Set .max_segs to some random number. Feel free to adjust. */	COMMENT
LOW	…hnd.675x/kernel/linux-4.19/drivers/video/fbdev/mxsfb.c	35	* For the developer: Don't forget to set the data bus width to the display	COMMENT
LOW	….675x/kernel/linux-4.19/drivers/video/fbdev/macmodes.c	28	* Order IS important! If you change these, don't forget to update	COMMENT
LOW	…d.675x/kernel/linux-4.19/drivers/gpu/drm/vc4/vc4_drv.h	19	/* Don't forget to update vc4_bo.c: bo_type_names[] when adding to	COMMENT
MEDIUM	…75x/kernel/linux-4.19/drivers/gpu/drm/i915/i915_perf.c	1885	* feature it's worth noting that clock ratio reports have to be	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/drivers/net/plip/plip.c	560	* so don't forget to remove it.	COMMENT
MEDIUM	…kernel/linux-4.19/drivers/net/ethernet/realtek/r8169.c	6408	* Feel free to adjust to your needs.	COMMENT
LOW	…el/linux-4.19/drivers/net/ethernet/xircom/xirc2ps_cs.c	1077	* Note: don't forget to change the ALLOC_SKB to .. +3	COMMENT
LOW	…rnel/linux-4.19/drivers/net/ethernet/toshiba/tc35815.c	1230	/* Reset the hardware here. Don't forget to set the station address. */	COMMENT
LOW	…x-4.19/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c	3841	(don't forget to mark the last one as last,	CODE
LOW	…ernel/linux-4.19/drivers/net/wireless/ath/ath10k/mac.c	8305	* Allow software encryption for all chips. Don't forget to	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/drivers/net/wan/dscc4.c	35	* go DCE on these ports, don't forget to use an adequate cable.	COMMENT
LOW	…5x/kernel/linux-4.19/drivers/usb/storage/unusual_uas.h	28	* and don't forget to CC: the USB development list <linux-usb@vger.kernel.org>	COMMENT
LOW	….04axhnd.675x/kernel/linux-4.19/drivers/usb/dwc2/hcd.c	4184	* Return: a pointer to a struct dwc2_tt. Don't forget to call	COMMENT
LOW	…rnel/linux-4.19/drivers/isdn/hardware/eicon/divacapi.h	158	/* Don't forget to adapt dos.asm after changing the _APPL structure!!!! */	COMMENT
LOW	…hnd.675x/kernel/linux-4.19/drivers/isdn/i4l/isdn_net.c	1381	* so don't forget to remove it.	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/drivers/dma/sun4i-dma.c	880	* may still trigger, so don't forget to disable them.	COMMENT
LOW	…d.675x/kernel/linux-4.19/drivers/edac/amd64_edac_inj.c	172	pr_notice_once("Don't forget to decrease MCE polling interval in\n"	CODE
MEDIUM	…l/linux-4.19/drivers/media/pci/cx23885/cx23885-cards.c	1880	/* For documentation purposes, it's worth noting that this	COMMENT
LOW	…hnd.675x/kernel/linux-4.19/include/uapi/drm/drm_mode.h	78	* When adding a new stereo mode don't forget to adjust DRM_MODE_FLAGS_3D_MAX	COMMENT
LOW	…hnd.675x/kernel/linux-4.19/include/uapi/sound/asound.h	114	/* Don't forget to change the following: */	COMMENT
LOW	…hnd.675x/kernel/linux-4.19/include/uapi/sound/asound.h	166	/* Don't forget to change the following: */	COMMENT
LOW	…hnd.675x/kernel/linux-4.19/include/uapi/sound/asound.h	173	/* Don't forget to change the following: */	COMMENT
LOW	…t-5.04axhnd.675x/kernel/linux-4.19/include/linux/gfp.h	14	* In case of changes, please don't forget to update	COMMENT
LOW	…-5.04axhnd.675x/kernel/linux-4.19/include/linux/init.h	43	* Don't forget to initialize data not at file scope, i.e. within a function,	COMMENT
LOW	…-5.04axhnd.675x/kernel/linux-4.19/include/linux/ipmi.h	320	* Base device for the interface. Don't forget to put this when	COMMENT
LOW	…t-5.04axhnd.675x/kernel/linux-4.19/include/sound/pcm.h	120	/* If you change this don't forget to change rates[] table in pcm_native.c */	COMMENT
LOW	…675x/kernel/linux-4.19/arch/m68k/include/asm/mac_via.h	19	* instead (and don't forget to check rbv_present when using via2!)	COMMENT
509 more matches not shown…

Deep Nesting1170 hits · 910 pts

Severity	File	Line	Context
LOW	…s/opensource/router_tools/libnl/python/netlink/util.py	130	CODE
LOW	…/opensource/router_tools/hostapd/hostapd/wps-ap-nfc.py	267	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	158	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	602	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_sae.py	700	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_tdls.py	498	CODE
LOW	…/opensource/router_tools/hostapd/tests/hwsim/tshark.py	24	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	535	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_vht.py	577	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_ieee8021x.py	167	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_ieee8021x.py	323	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	2436	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_wps.py	2473	CODE
LOW	…opensource/router_tools/hostapd/tests/hwsim/test_he.py	621	CODE
LOW	…opensource/router_tools/hostapd/tests/hwsim/test_he.py	666	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_radius.py	1027	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_radius.py	1156	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_radius.py	1442	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_radius.py	1069	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_radius.py	1186	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_radius.py	1467	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_psk.py	2467	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	81	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	2529	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	3912	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	4608	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	5035	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	5777	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	6289	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	6664	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	7029	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	7240	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	7999	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	9009	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	9119	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	9733	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	10043	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	10107	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	127	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	221	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	3499	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	4431	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	5305	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_hostapd_oom.py	15	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_macsec.py	462	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_vlan.py	570	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_pmksa_cache.py	474	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_pmksa_cache.py	835	CODE
LOW	…e/router_tools/hostapd/tests/hwsim/test_pmksa_cache.py	950	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1280	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1383	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1537	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	6027	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1324	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1425	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	1584	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_dbus.py	6055	CODE
LOW	…nsource/router_tools/hostapd/tests/hwsim/remotehost.py	188	CODE
LOW	…ce/router_tools/hostapd/tests/hwsim/test_fst_module.py	86	CODE
LOW	…ce/router_tools/hostapd/tests/hwsim/test_fst_module.py	193	CODE
1110 more matches not shown…

Fake / Example Data653 hits · 757 pts

Severity	File	Line	Snippet	Context
LOW	…dep.rt-ax86u_pro/fdt/dtc-1.5.1/tests/pylibfdt_tests.py	585	self.fdt.getprop(node, 'placeholder'))	CODE
LOW	…ter-sysdep.rt-ax86u_pro/fdt/dtc-1.5.1/tests/sw_tree1.c	188	CHECK(fdt_property_placeholder(fdt, "placeholder", place_len, &place));	CODE
LOW	…ter-sysdep.rt-ax86u_pro/fdt/dtc-1.5.1/tests/fs_tree1.c	112	mkfile_str("placeholder", "this is a placeholder string\0string2");	CODE
LOW	…uter-sysdep.rt-ax86u_pro/fdt/dtc-1.5.1/tests/lorem.txt	1	Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris eros	CODE
LOW	…uter-sysdep.rt-ax86u_pro/fdt/dtc-1.5.1/tests/lorem.txt	1	Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris eros	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_eap_proto.py	8629	identity="user@example.com", password="password",	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_erp.py	168	f.write('"user@example.com" PSK 0123456789abcdef0123456789abcdef\n')	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_erp.py	179	eap="PSK", identity="user@example.com",	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_eap.py	882	run_ap_wpa2_eap_sim_ext_anonymous(dev, "anonymous@example.org")	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_eap.py	883	run_ap_wpa2_eap_sim_ext_anonymous(dev, "@example.org")	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_eap.py	895	run_ap_wpa2_eap_sim_ext_anonymous(dev, "anonymous@example.org",	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_ap_eap.py	897	run_ap_wpa2_eap_sim_ext_anonymous(dev, "@example.org",	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_wpas_ctrl.py	494	("username", "user@example.com", True),	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_hs20.py	5992	'username': "user@example.com",	CODE
LOW	…ts/opensource/router_tools/hostapd/src/crypto/random.c	52	static u8 dummy_key[20];	CODE
LOW	…ts/opensource/router_tools/hostapd/src/crypto/random.c	108	hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) pool,	CODE
LOW	…ts/opensource/router_tools/hostapd/src/crypto/random.c	114	hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) buf,	CODE
LOW	…ts/opensource/router_tools/hostapd/src/crypto/random.c	223	if (dummy_key_avail == sizeof(dummy_key))	CODE
LOW	…ts/opensource/router_tools/hostapd/src/crypto/random.c	234	res = getrandom(dummy_key + dummy_key_avail,	CODE
LOW	…ts/opensource/router_tools/hostapd/src/crypto/random.c	235	sizeof(dummy_key) - dummy_key_avail, GRND_NONBLOCK);	CODE
LOW	…ts/opensource/router_tools/hostapd/src/crypto/random.c	268	res = read(fd, dummy_key + dummy_key_avail,	CODE
LOW	…ts/opensource/router_tools/hostapd/src/crypto/random.c	269	sizeof(dummy_key) - dummy_key_avail);	CODE
LOW⚡	…ts/opensource/router_tools/hostapd/src/crypto/random.c	280	(unsigned) (sizeof(dummy_key) - dummy_key_avail));	CODE
LOW⚡	…ts/opensource/router_tools/hostapd/src/crypto/random.c	283	if (dummy_key_avail == sizeof(dummy_key)) {	CODE
LOW⚡	…ts/opensource/router_tools/hostapd/src/crypto/random.c	292	(unsigned) dummy_key_avail, (unsigned) sizeof(dummy_key));	CODE
LOW⚡	…ts/opensource/router_tools/hostapd/src/crypto/random.c	333	if (dummy_key_avail == sizeof(dummy_key)) {	CODE
LOW⚡	…ts/opensource/router_tools/hostapd/src/crypto/random.c	338	res = read(sock, dummy_key + dummy_key_avail,	CODE
LOW⚡	…ts/opensource/router_tools/hostapd/src/crypto/random.c	339	sizeof(dummy_key) - dummy_key_avail);	CODE
LOW⚡	…ts/opensource/router_tools/hostapd/src/crypto/random.c	349	(unsigned) (sizeof(dummy_key) - dummy_key_avail));	CODE
LOW⚡	…ts/opensource/router_tools/hostapd/src/crypto/random.c	359	(unsigned) (sizeof(dummy_key) - dummy_key_avail));	CODE
LOW⚡	…ts/opensource/router_tools/hostapd/src/crypto/random.c	363	if (dummy_key_avail == sizeof(dummy_key)) {	CODE
LOW	…nsource/router_tools/hostapd/src/drivers/driver_ndis.c	1083	u8 dummy_key[5] = { 0x11, 0x22, 0x33, 0x44, 0x55 };	CODE
LOW	…nsource/router_tools/hostapd/src/drivers/driver_ndis.c	1095	NULL, 0, dummy_key,	CODE
LOW	…nsource/router_tools/hostapd/src/drivers/driver_ndis.c	1096	sizeof(dummy_key));	CODE
LOW	…ter_tools/wpa_supplicant/tests/hwsim/test_eap_proto.py	8629	identity="user@example.com", password="password",	CODE
LOW	…ce/router_tools/wpa_supplicant/tests/hwsim/test_erp.py	168	f.write('"user@example.com" PSK 0123456789abcdef0123456789abcdef\n')	CODE
LOW	…ce/router_tools/wpa_supplicant/tests/hwsim/test_erp.py	179	eap="PSK", identity="user@example.com",	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/test_ap_eap.py	882	run_ap_wpa2_eap_sim_ext_anonymous(dev, "anonymous@example.org")	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/test_ap_eap.py	883	run_ap_wpa2_eap_sim_ext_anonymous(dev, "@example.org")	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/test_ap_eap.py	895	run_ap_wpa2_eap_sim_ext_anonymous(dev, "anonymous@example.org",	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/test_ap_eap.py	897	run_ap_wpa2_eap_sim_ext_anonymous(dev, "@example.org",	CODE
LOW	…ter_tools/wpa_supplicant/tests/hwsim/test_wpas_ctrl.py	494	("username", "user@example.com", True),	CODE
LOW	…outer_tools/wpa_supplicant/tests/hwsim/test_ap_hs20.py	5992	'username': "user@example.com",	CODE
LOW	…source/router_tools/wpa_supplicant/src/crypto/random.c	52	static u8 dummy_key[20];	CODE
LOW	…source/router_tools/wpa_supplicant/src/crypto/random.c	108	hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) pool,	CODE
LOW	…source/router_tools/wpa_supplicant/src/crypto/random.c	114	hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) buf,	CODE
LOW	…source/router_tools/wpa_supplicant/src/crypto/random.c	223	if (dummy_key_avail == sizeof(dummy_key))	CODE
LOW	…source/router_tools/wpa_supplicant/src/crypto/random.c	234	res = getrandom(dummy_key + dummy_key_avail,	CODE
LOW	…source/router_tools/wpa_supplicant/src/crypto/random.c	235	sizeof(dummy_key) - dummy_key_avail, GRND_NONBLOCK);	CODE
LOW	…source/router_tools/wpa_supplicant/src/crypto/random.c	259	res = read(fd, dummy_key + dummy_key_avail,	CODE
LOW	…source/router_tools/wpa_supplicant/src/crypto/random.c	260	sizeof(dummy_key) - dummy_key_avail);	CODE
LOW⚡	…source/router_tools/wpa_supplicant/src/crypto/random.c	271	(unsigned) (sizeof(dummy_key) - dummy_key_avail));	CODE
LOW⚡	…source/router_tools/wpa_supplicant/src/crypto/random.c	274	if (dummy_key_avail == sizeof(dummy_key)) {	CODE
LOW⚡	…source/router_tools/wpa_supplicant/src/crypto/random.c	283	(unsigned) dummy_key_avail, (unsigned) sizeof(dummy_key));	CODE
LOW⚡	…source/router_tools/wpa_supplicant/src/crypto/random.c	324	if (dummy_key_avail == sizeof(dummy_key)) {	CODE
LOW⚡	…source/router_tools/wpa_supplicant/src/crypto/random.c	329	res = read(sock, dummy_key + dummy_key_avail,	CODE
LOW⚡	…source/router_tools/wpa_supplicant/src/crypto/random.c	330	sizeof(dummy_key) - dummy_key_avail);	CODE
LOW⚡	…source/router_tools/wpa_supplicant/src/crypto/random.c	339	(unsigned) (sizeof(dummy_key) - dummy_key_avail));	CODE
LOW⚡	…source/router_tools/wpa_supplicant/src/crypto/random.c	342	if (dummy_key_avail == sizeof(dummy_key)) {	CODE
LOW	…/router_tools/wpa_supplicant/src/drivers/driver_ndis.c	1083	u8 dummy_key[5] = { 0x11, 0x22, 0x33, 0x44, 0x55 };	CODE
593 more matches not shown…

Verbosity Indicators416 hits · 646 pts

Severity	File	Line	Snippet	Context
LOW	…pl87/main/components/opensource/jquerylib/jquery-ui.js	13442	// IE sets focus asynchronously, so we need to check if focus	COMMENT
LOW	…router_tools/libnl/include/netlink-private/cache-api.h	208	* The purpose of this function is to filter out notifications	COMMENT
LOW	…mponents/opensource/router_tools/hostapd/src/fst/fst.h	139	* Note: The purpose of this function is to allocate and initiate global	COMMENT
LOW	…mponents/opensource/router_tools/hostapd/src/fst/fst.h	147	* Note: The purpose of this function is to deallocate and de-initiate global	COMMENT
LOW	…s/opensource/router_tools/wpa_supplicant/src/fst/fst.h	139	* Note: The purpose of this function is to allocate and initiate global	COMMENT
LOW	…s/opensource/router_tools/wpa_supplicant/src/fst/fst.h	147	* Note: The purpose of this function is to deallocate and de-initiate global	COMMENT
LOW	…04axhnd.675x/bootloaders/u-boot-2019.07/cmd/mtdparts.c	438	* Now we need to check if the partition starts and ends on	COMMENT
LOW	…nd.675x/bootloaders/u-boot-2019.07/drivers/net/e1000.c	3745	/* Now we need to check if the user selected RX ONLY	COMMENT
LOW	…ders/u-boot-2019.07/drivers/ddr/fsl/ddr2_dimm_params.c	142	* The purpose of this function is to compute a suitable	COMMENT
LOW	…ders/u-boot-2019.07/drivers/ddr/fsl/ddr1_dimm_params.c	161	* The purpose of this function is to compute a suitable	COMMENT
LOW	…ers/u-boot-2019.07/board/broadcom/bcmbca/httpd/httpd.c	155	// We need to check if file which we are going to download	COMMENT
LOW	…5x/bootloaders/u-boot-2019.07/arch/x86/cpu/quark/smc.c	2302	* The purpose of this function is to ensure the SEC comes out of reset	COMMENT
LOW	…rs/u-boot-2019.07/scripts/kconfig/streamline_config.pl	564	# If the config has no prompt, then we need to check if a config	COMMENT
LOW	…t-5.04axhnd.675x/bootloaders/u-boot-2019.07/lib/hang.c	16	* The purpose of this function is to stop further execution of code cause	COMMENT
LOW	…nd.675x/kernel/linux-4.19/tools/perf/util/symbol-elf.c	246	* We need to check if we have a .dynsym, so that we can handle the	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/tools/perf/util/color.h	25	* This variable stores the value of color.ui	COMMENT
LOW	…5x/kernel/linux-4.19/tools/perf/arch/arm/util/cs-etm.c	549	* wrapped around. To find we need to check if we have data at the very	COMMENT
LOW	….04axhnd.675x/kernel/linux-4.19/net/mptcp/mptcp_ctrl.c	1225	* So, we need to check if someone else already added the token	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/net/ipv4/tcp_fastopen.c	463	* The following code block is to deal with middle box issues with TFO:	COMMENT
LOW	…c-rt-5.04axhnd.675x/kernel/linux-4.19/net/ipv6/route.c	533	* for now, however, we need to check if it	COMMENT
LOW	…nel/linux-4.19/drivers/infiniband/ulp/ipoib/ipoib_ib.c	1108	* not to break userspace applications, We need to check if the	COMMENT
LOW	…75x/kernel/linux-4.19/drivers/mmc/host/sdhci-of-at91.c	181	* We need to check if we have the requested rate for gck because in	COMMENT
LOW	…nd.675x/kernel/linux-4.19/drivers/acpi/acpica/exmisc.c	159	* We need to check if the shiftcount is larger than the integer bit	COMMENT
LOW	…nd.675x/kernel/linux-4.19/drivers/acpi/acpica/exmisc.c	170	* We need to check if the shiftcount is larger than the integer bit	COMMENT
LOW	…5x/kernel/linux-4.19/drivers/tty/serial/atmel_serial.c	1566	* If the current buffer is full, we need to check if	COMMENT
LOW	…linux-4.19/drivers/staging/rtl8188eu/hal/usb_halinit.c	689	/* 2010/08/09 MH We need to check if we need to turnon or off RF after detecting */	COMMENT
LOW	…inux-4.19/drivers/staging/rtl8723bs/hal/sdio_halinit.c	844	/* 2010/08/09 MH We need to check if we need to turnon or off RF after detecting */	COMMENT
LOW	…hnd.675x/kernel/linux-4.19/drivers/net/fddi/skfp/ess.c	24	* PURPOSE: The purpose of this function is to control	COMMENT
LOW	…/linux-4.19/drivers/net/ethernet/intel/igb/e1000_mac.c	970	/* Now we need to check if the user selected RX ONLY	COMMENT
LOW	…/linux-4.19/drivers/net/ethernet/intel/igb/e1000_mac.c	1125	/* Now we need to check if the user selected Rx ONLY	COMMENT
LOW	…linux-4.19/drivers/net/ethernet/intel/e1000/e1000_hw.c	2145	/* Now we need to check if the user selected Rx	COMMENT
LOW	…x-4.19/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c	2276	* Now we need to check if the user selected Rx ONLY	COMMENT
LOW	…nel/linux-4.19/drivers/net/ethernet/intel/e1000e/mac.c	1097	/* Now we need to check if the user selected Rx ONLY	COMMENT
LOW	…nel/linux-4.19/drivers/net/ethernet/intel/e1000e/mac.c	1230	/* Now we need to check if the user selected Rx ONLY	COMMENT
LOW	…inux-4.19/drivers/net/wireless/intel/iwlwifi/mvm/sta.c	610	* we need to check if the numerical value of X is LARGER than of Y.	COMMENT
LOW	…kernel/linux-4.19/drivers/net/wimax/i2400m/usb-notif.c	242	* We need to check if we have done it before as for example,	COMMENT
LOW	…t-5.04axhnd.675x/kernel/linux-4.19/drivers/atm/lanai.c	1255	* We need to check if the "butt busy" bit is set before	COMMENT
LOW	…5x/kernel/linux-4.19/drivers/scsi/isci/remote_device.c	866	/* we need to check if this request is still valid to continue. */	COMMENT
LOW	…hnd.675x/kernel/linux-4.19/drivers/isdn/hisax/config.c	1477	/* we need to check if further cards can be added */	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/drivers/rtc/rtc-ac100.c	201	* Thus we need to check if the parent exists before	COMMENT
LOW	…675x/kernel/linux-4.19/drivers/mtd/devices/spear_smi.c	596	* The purpose of this function is to ensure a memcpy_toio() with byte writes	COMMENT
LOW	…t-5.04axhnd.675x/kernel/linux-4.19/drivers/base/node.c	451	* We need to check if page belongs to nid only at the boot	COMMENT
LOW	…x-4.19/arch/mips/include/asm/octeon/cvmx-helper-util.h	163	* not a dynamic short packet. We need to check if it is a	COMMENT
LOW	…d.675x/kernel/linux-4.19/arch/arm/mach-omap2/prm3xxx.c	223	* The purpose of this function is to clear any wake-up events latched	COMMENT
LOW	…l/linux-4.19/arch/arm/mach-omap2/omap-mpuss-lowpower.c	218	* The purpose of this function is to manage low power programming	COMMENT
LOW	…ernel/linux-4.19/arch/arm/mach-omap1/board-ams-delta.c	634	* The purpose of this function is to take care of proper initialization of	COMMENT
LOW	…ernel/linux-4.19/arch/arm/mach-omap1/board-ams-delta.c	807	* The purpose of this function is to take care of assignment of GPIO numbers	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	587	# Step 3: Compile the file that holds the list of call sites to mcount.	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	594	# Step 4: Do we have sections that started with local functions?	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	609	# Step 5: set up each local function as a global	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	614	# Step 6: Link the global version to our list.	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	619	# Step 7: Convert the local functions back into local symbols	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	631	# Step 8: Link the object with our list of call sites object.	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	636	# Step 9: Move the result back to the original object.	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	440	# Step 1: find all the local (static functions) and weak symbols.	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	498	# Step 2: find the sections and mcount call sites	COMMENT
LOW	…kernel/linux-4.19/scripts/kconfig/streamline_config.pl	564	# If the config has no prompt, then we need to check if a config	COMMENT
LOW	…e/src-rt-5.04axhnd.675x/kernel/linux-4.19/mm/vmalloc.c	2318	* The purpose of this function is to make sure the vmalloc area	COMMENT
LOW	…src-rt-5.04axhnd.675x/kernel/linux-4.19/fs/eventpoll.c	717	* We need to check if the item is already in the list.	COMMENT
LOW	…src-rt-5.04axhnd.675x/kernel/linux-4.19/fs/eventpoll.c	1884	* an ep, then we need to check if the newly added	COMMENT
356 more matches not shown…

Synthetic Comment Markers60 hits · 525 pts

Severity	File	Line	Snippet	Context
HIGH	…pl87/main/components/opensource/jquerylib/jquery-ui.js	4298	// Format a name, short or long as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/savefile.c	608	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/savefile.c	615	* transport - http://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/savefile.c	622	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/pcap/bpf.h	782	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/pcap/bpf.h	789	* transport - http://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/pcap/bpf.h	796	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT
HIGH	…x/kernel/linux-4.19/tools/include/uapi/linux/netlink.h	59	#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */	COMMENT
HIGH	…axhnd.675x/kernel/linux-4.19/tools/time/udelay_test.sh	7	# at least as long as requested (as compared to ktime).	COMMENT
HIGH	…nd.675x/kernel/linux-4.19/include/uapi/linux/netlink.h	60	#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */	COMMENT
HIGH	…pl69/main/components/opensource/jquerylib/jquery-ui.js	4298	// Format a name, short or long as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/savefile.c	608	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/savefile.c	615	* transport - http://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/savefile.c	622	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/pcap/bpf.h	782	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/pcap/bpf.h	789	* transport - http://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/pcap/bpf.h	796	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT
HIGH	…L.07p2axhnd/kernel/linux-4.1/tools/time/udelay_test.sh	7	# at least as long as requested (as compared to ktime).	COMMENT
HIGH	…pl69/main/components/opensource/jquerylib/jquery-ui.js	4298	// Format a name, short or long as requested	COMMENT
HIGH	…2axhnd.675x/kernel/linux-4.1/tools/time/udelay_test.sh	7	# at least as long as requested (as compared to ktime).	COMMENT
HIGH	…pl51/main/components/opensource/jquerylib/jquery-ui.js	4298	// Format a name, short or long as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/savefile.c	608	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/savefile.c	615	* transport - http://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/savefile.c	622	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/pcap/bpf.h	782	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/pcap/bpf.h	789	* transport - http://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	…/main/components/opensource/libpcap_winpcap/pcap/bpf.h	796	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT
HIGH	…t-5.02axhnd/kernel/linux-4.1/tools/time/udelay_test.sh	7	# at least as long as requested (as compared to ktime).	COMMENT
HIGH	…outer-sysdep.rt-be96u/obuspa/obuspa/src/core/dm_exec.c	107	kDmExecMsg_MtpThreadExited, // Sent to signal that the MTP thread has exited as requested by a scheduled exit	CODE
HIGH	…outer-sysdep.rt-be92u/obuspa/obuspa/src/core/dm_exec.c	107	kDmExecMsg_MtpThreadExited, // Sent to signal that the MTP thread has exited as requested by a scheduled exit	CODE
HIGH	…l103/main/components/opensource/jquerylib/jquery-ui.js	4298	// Format a name, short or long as requested	COMMENT
HIGH	…l105/main/components/opensource/jquerylib/jquery-ui.js	4298	// Format a name, short or long as requested	COMMENT
HIGH	…outer-sysdep.rt-be88u/obuspa/obuspa/src/core/dm_exec.c	107	kDmExecMsg_MtpThreadExited, // Sent to signal that the MTP thread has exited as requested by a scheduled exit	CODE
HIGH	…ter-sysdep.rt-be58_go/obuspa/obuspa/src/core/dm_exec.c	107	kDmExecMsg_MtpThreadExited, // Sent to signal that the MTP thread has exited as requested by a scheduled exit	CODE
HIGH	…outer-sysdep.rt-be86u/obuspa/obuspa/src/core/dm_exec.c	107	kDmExecMsg_MtpThreadExited, // Sent to signal that the MTP thread has exited as requested by a scheduled exit	CODE
HIGH	…er-sysdep.gt-be98_pro/obuspa/obuspa/src/core/dm_exec.c	107	kDmExecMsg_MtpThreadExited, // Sent to signal that the MTP thread has exited as requested by a scheduled exit	CODE
HIGH	…6/kernel/linux-4.19/tools/include/uapi/linux/netlink.h	59	#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */	COMMENT
HIGH	…behnd.4916/kernel/linux-4.19/tools/time/udelay_test.sh	7	# at least as long as requested (as compared to ktime).	COMMENT
HIGH	…nd.4916/kernel/linux-4.19/include/uapi/linux/netlink.h	60	#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */	COMMENT
HIGH	…lzma/CS/7zip/Compress/LzmaAlone/Properties/Settings.cs	3	// This code was generated by a tool.	COMMENT
HIGH	…zma/CS/7zip/Compress/LzmaAlone/Properties/Resources.cs	3	// This code was generated by a tool.	COMMENT
HIGH	release/src/router/ffmpeg/libavformat/avformat.h	1395	#define AVFMT_FLAG_AUTO_BSF 0x200000 ///< Add bitstream filters as requested by the muxer	COMMENT
HIGH	release/src/router/ffmpeg/libavformat/avformat.h	1395	#define AVFMT_FLAG_AUTO_BSF 0x200000 ///< Add bitstream filters as requested by the muxer	COMMENT
HIGH	release/src/router/jq-1.7.1/src/decNumber/decNumber.c	5316	// accumulator bounds are as requested (could underflow)	COMMENT
HIGH	release/src/router/jq-1.7.1/src/decNumber/decNumber.c	5723	// accumulator bounds are as requested (could underflow, but	COMMENT
HIGH	…ect-1.12/pjmedia/src/pjmedia-audiodev/symb_mda_dev.cpp	250	// framesize as requested.	COMMENT
HIGH	release/src/router/ethtool-6.2/uapi/linux/netlink.h	67	#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */	COMMENT
HIGH	release/src/router/dropbear/src/libcrux_mlkem768_sha3.h	220	* This code was generated with the following revisions:	COMMENT
HIGH	release/src/router/dropbear/src/libcrux_mlkem768_sha3.h	762	* This code was generated with the following revisions:	COMMENT
HIGH	release/src/router/dropbear/src/libcrux_mlkem768_sha3.h	872	* This code was generated with the following revisions:	COMMENT
HIGH	release/src/router/dropbear/src/libcrux_mlkem768_sha3.h	5777	* This code was generated with the following revisions:	COMMENT
HIGH	release/src/router/lldpd-1.0.11/include/linux/netlink.h	59	#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */	COMMENT
HIGH	…db-4.8.30/java/src/com/sleepycat/asm/MethodWriter.java	1685	// offsets, and inserts (or removes) bytes as requested.	COMMENT
HIGH	…e2-5.11.0/iproute2-5.11.0/include/uapi/linux/netlink.h	59	#define NLM_F_DUMP_FILTERED 0x20 /* Dump was filtered as requested */	COMMENT
HIGH⚡	release/src/router/libpcap/pcap-common.c	571	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	release/src/router/libpcap/pcap-common.c	578	* transport - http://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	release/src/router/libpcap/pcap-common.c	585	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT
HIGH⚡	release/src/router/libpcap/pcap/bpf.h	861	* FlexRay automotive bus - http://www.flexray.com/ - as requested	COMMENT
HIGH⚡	release/src/router/libpcap/pcap/bpf.h	868	* transport - http://www.mostcooperation.com/ - as requested	COMMENT
HIGH⚡	release/src/router/libpcap/pcap/bpf.h	875	* http://www.lin-subbus.org/ - as requested by Hannes Kaelber	COMMENT

Cross-Language Confusion (JS/TS)68 hits · 468 pts

Severity	File	Line	Snippet	Context
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	7	print(" initialized: " + device.get_is_initialized());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	8	print(" usec since initialized: " + device.get_usec_since_initialized());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	9	print(" subsystem: " + device.get_subsystem());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	10	print(" devtype: " + device.get_devtype());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	11	print(" name: " + device.get_name());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	12	print(" number: " + device.get_number());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	13	print(" sysfs_path: " + device.get_sysfs_path());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	14	print(" driver: " + device.get_driver());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	15	print(" action: " + device.get_action());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	16	print(" seqnum: " + device.get_seqnum());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	17	print(" device type: " + device.get_device_type());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	18	print(" device number: " + device.get_device_number());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	19	print(" device file: " + device.get_device_file());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	20	print(" device file symlinks: " + device.get_device_file_symlinks());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	21	print(" tags: " + device.get_tags());	CODE
HIGH⚡	…/src/router/udev-173/extras/gudev/seed-example-enum.js	24	print(" " + keys[n] + "=" + device.get_property(keys[n]));	CODE
HIGH	…/src/router/udev-173/extras/gudev/seed-example-enum.js	37	print("");	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	9	print (" subsystem: " + device.get_subsystem ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	10	print (" devtype: " + device.get_devtype ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	11	print (" name: " + device.get_name ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	12	print (" number: " + device.get_number ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	13	print (" sysfs_path: " + device.get_sysfs_path ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	14	print (" driver: " + device.get_driver ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	15	print (" action: " + device.get_action ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	16	print (" seqnum: " + device.get_seqnum ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	17	print (" device type: " + device.get_device_type ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	18	print (" device number: " + device.get_device_number ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	19	print (" device file: " + device.get_device_file ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	20	print (" device file symlinks: " + device.get_device_file_symlinks ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	21	print (" foo: " + device.get_sysfs_attr_as_strv ("stat"));	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	24	print (" " + keys[n] + "=" + device.get_property (keys[n]));	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	29	print ("action " + action + " on device " + device.get_sysfs_path());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	31	print ("");	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	39	print ("block device: " + block_devices[n].get_device_file ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	46	print ("query_by_device_number 0x810 -> null");	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	48	print ("query_by_device_number 0x810 -> " + d.get_device_file ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	51	print ("--------------------------------------------------------------------------");	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	54	print ("");	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	60	print ("query_by_sysfs_path (\"/sys/block/sda1\") -> " + d.get_device_file ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	63	print ("query_by_subsystem_and_name (\"block\", \"sda2\") -> " + d.get_device_file ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	66	print ("query_by_device_file (\"/dev/sda\") -> " + d.get_device_file ());	CODE
HIGH⚡	…lease/src/router/udev-173/extras/gudev/seed-example.js	69	print ("query_by_device_file (\"/dev/block/8:0\") -> " + d.get_device_file ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	13	print (" subsystem: " + device.get_subsystem ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	14	print (" devtype: " + device.get_devtype ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	15	print (" name: " + device.get_name ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	16	print (" number: " + device.get_number ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	17	print (" sysfs_path: " + device.get_sysfs_path ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	18	print (" driver: " + device.get_driver ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	19	print (" action: " + device.get_action ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	20	print (" seqnum: " + device.get_seqnum ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	21	print (" device type: " + device.get_device_type ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	22	print (" device number: " + device.get_device_number ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	23	print (" device file: " + device.get_device_file ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	24	print (" device file symlinks: " + device.get_device_file_symlinks ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	25	print (" foo: " + device.get_sysfs_attr_as_strv ("stat"));	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	28	print (" " + keys[n] + "=" + device.get_property (keys[n]));	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	33	print ("action " + action + " on device " + device.get_sysfs_path());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	35	print ("");	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	43	print ("block device: " + block_devices[n].get_device_file ());	CODE
HIGH⚡	release/src/router/udev-173/extras/gudev/gjs-example.js	50	print ("query_by_device_number 0x810 -> null");	CODE
8 more matches not shown…

Hallucination Indicators31 hits · 310 pts

Severity	File	Line	Snippet	Context
CRITICAL	…/main/components/opensource/jquerylib/jquery-ui.min.js	10	(function(a,b){function c(b,c){var e=b.nodeName.toLowerCase();if("area"===e){var f=b.parentNode,g=f.name,h;return!b.href	CODE
CRITICAL	…in/components/opensource/jquerylib/jquery-2.0.3.min.js	9	};"inprogress"===i&&(i=n.shift(),r--),i&&("fx"===t&&n.unshift("inprogress"),delete o.stop,i.call(e,s,o)),!r&&o&&o.empty.	CODE
CRITICAL	…ootloaders/u-boot-2019.07/doc/sphinx/kernel_include.py	104	self.state.document.settings.record_dependencies.add(path)	CODE
CRITICAL	…rnel/linux-4.19/Documentation/sphinx/kernel_include.py	104	self.state.document.settings.record_dependencies.add(path)	CODE
CRITICAL	…/main/components/opensource/jquerylib/jquery-ui.min.js	10	(function(a,b){function c(b,c){var e=b.nodeName.toLowerCase();if("area"===e){var f=b.parentNode,g=f.name,h;return!b.href	CODE
CRITICAL	…in/components/opensource/jquerylib/jquery-2.0.3.min.js	9	};"inprogress"===i&&(i=n.shift(),r--),i&&("fx"===t&&n.unshift("inprogress"),delete o.stop,i.call(e,s,o)),!r&&o&&o.empty.	CODE
CRITICAL	…/main/components/opensource/jquerylib/jquery-ui.min.js	10	(function(a,b){function c(b,c){var e=b.nodeName.toLowerCase();if("area"===e){var f=b.parentNode,g=f.name,h;return!b.href	CODE
CRITICAL	…in/components/opensource/jquerylib/jquery-2.0.3.min.js	9	};"inprogress"===i&&(i=n.shift(),r--),i&&("fx"===t&&n.unshift("inprogress"),delete o.stop,i.call(e,s,o)),!r&&o&&o.empty.	CODE
CRITICAL	…/main/components/opensource/jquerylib/jquery-ui.min.js	10	(function(a,b){function c(b,c){var e=b.nodeName.toLowerCase();if("area"===e){var f=b.parentNode,g=f.name,h;return!b.href	CODE
CRITICAL	…in/components/opensource/jquerylib/jquery-2.0.3.min.js	9	};"inprogress"===i&&(i=n.shift(),r--),i&&("fx"===t&&n.unshift("inprogress"),delete o.stop,i.call(e,s,o)),!r&&o&&o.empty.	CODE
CRITICAL	…/main/components/opensource/jquerylib/jquery-ui.min.js	10	(function(a,b){function c(b,c){var e=b.nodeName.toLowerCase();if("area"===e){var f=b.parentNode,g=f.name,h;return!b.href	CODE
CRITICAL	…in/components/opensource/jquerylib/jquery-2.0.3.min.js	9	};"inprogress"===i&&(i=n.shift(),r--),i&&("fx"===t&&n.unshift("inprogress"),delete o.stop,i.call(e,s,o)),!r&&o&&o.empty.	CODE
CRITICAL	…/main/components/opensource/jquerylib/jquery-ui.min.js	10	(function(a,b){function c(b,c){var e=b.nodeName.toLowerCase();if("area"===e){var f=b.parentNode,g=f.name,h;return!b.href	CODE
CRITICAL	…in/components/opensource/jquerylib/jquery-2.0.3.min.js	9	};"inprogress"===i&&(i=n.shift(),r--),i&&("fx"===t&&n.unshift("inprogress"),delete o.stop,i.call(e,s,o)),!r&&o&&o.empty.	CODE
CRITICAL	…ootloaders/u-boot-2019.07/doc/sphinx/kernel_include.py	104	self.state.document.settings.record_dependencies.add(path)	CODE
CRITICAL	…rnel/linux-4.19/Documentation/sphinx/kernel_include.py	104	self.state.document.settings.record_dependencies.add(path)	CODE
CRITICAL	…er/lighttpd-1.4.39/external_file/js/smbdav-main.min.js	272	"top"?b.targetHeight:b.at[1]==="bottom"?-b.targetHeight:0,l=-2*b.offset[1];if(c<0){if(d=a.top+h+k+l+b.collisionHeight-e-	CODE
CRITICAL	…ighttpd-1.4.39/external_file/js/smbdav-main.app.min.js	68	(function(a){a.widget("mobile.tabbar",a.mobile.navbar,{_create:function(){this.element.addClass("ui-footer ui-footer-fix	CODE
CRITICAL	…c/router/lighttpd-1.4.39/external_file/js/jquery-ui.js	6	!function(t){"use strict";"function"==typeof define&&define.amd?define(["jquery"],t):t(jQuery)}(function(V){"use strict"	CODE
CRITICAL	…/src/router/lighttpd-1.4.39/external_file/js/jquery.js	2	!function(e,t){"use strict";"object"==typeof module&&"object"==typeof module.exports?module.exports=e.document?t(e,!0):f	CODE
CRITICAL	…-1.4.39/external_file/js/jplayer/jquery.jplayer.min.js	85	this.internal.fullscreenchangeHandler&&document.removeEventListener(a.event.fullscreenchange,this.internal.fullscreencha	CODE
CRITICAL	release/src/router/www/calendar/jquery-ui.js	6	!function(t){"use strict";"function"==typeof define&&define.amd?define(["jquery"],t):t(jQuery)}(function(V){"use strict"	CODE
CRITICAL	…ase/src/router/www/sysdep/FUNCTION/ROG_UI/js/loader.js	150	d(a,c);e(f)},google.a.c.ea?(google.a.c.ea=!1,google.a.c.zb(google.a.c.i.prefix+"/"+a+"/loader.js",window.document,e)):e(	CODE
CRITICAL	…/router/www/sysdep/FUNCTION/ROG_UI/charts/45/loader.js	46	google.a.b.i.prefix);K.s("google.visualization.CssPath",google.a.b.i.css_prefix.replace(G,google.a.b.i.prefix).replace(I	CODE
CRITICAL	release/src/router/www/js/jquery.js	2	!function(e,t){"use strict";"object"==typeof module&&"object"==typeof module.exports?module.exports=e.document?t(e,!0):f	CODE
CRITICAL	…/src/router/www/dashboard/datatables/datatables.min.js	106	!function(e){var a,i;"function"==typeof define&&define.amd?define(["jquery","datatables.net"],function(t){return e(t,win	CODE
CRITICAL	…object-manager-example/gdbus-example-objectmanager.xml	14	org.gtk.GDBus.Example.ObjectManager.Animal.Poke() method to	CODE
CRITICAL	…se/src/router/db-4.8.30/docs/java/deprecated-list.html	141	<TD><A HREF="com/sleepycat/persist/evolve/EvolveConfig.html#cloneConfig()">com.sleepycat.persist.evolve.EvolveConfig.clo	CODE
CRITICAL	…se/src/router/db-4.8.30/docs/java/deprecated-list.html	228	<TD><A HREF="com/sleepycat/bind/tuple/TupleBase.html#newOutput()">com.sleepycat.bind.tuple.TupleBase.newOutput()</A>	CODE
CRITICAL	…se/src/router/db-4.8.30/docs/java/deprecated-list.html	233	<TD><A HREF="com/sleepycat/bind/tuple/TupleBase.html#newOutput(byte[])">com.sleepycat.bind.tuple.TupleBase.newOutput(byt	CODE
CRITICAL	…uter/db-4.8.30/docs/programmer_reference/java_faq.html	123	at com.sleepycat.bind.serial.StoredClassCatalog.getClassInfo(StoredClassCatalog.java:211)	CODE

Structural Annotation Overuse137 hits · 234 pts

Severity	File	Line	Snippet	Context
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	587	# Step 3: Compile the file that holds the list of call sites to mcount.	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	594	# Step 4: Do we have sections that started with local functions?	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	609	# Step 5: set up each local function as a global	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	614	# Step 6: Link the global version to our list.	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	619	# Step 7: Convert the local functions back into local symbols	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	631	# Step 8: Link the object with our list of call sites object.	COMMENT
LOW⚡	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	636	# Step 9: Move the result back to the original object.	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	440	# Step 1: find all the local (static functions) and weak symbols.	COMMENT
LOW	…04axhnd.675x/kernel/linux-4.19/scripts/recordmcount.pl	498	# Step 2: find the sections and mcount call sites	COMMENT
LOW⚡	…02L.07p2axhnd/kernel/linux-4.1/scripts/recordmcount.pl	550	# Step 3: Compile the file that holds the list of call sites to mcount.	COMMENT
LOW⚡	…02L.07p2axhnd/kernel/linux-4.1/scripts/recordmcount.pl	557	# Step 4: Do we have sections that started with local functions?	COMMENT
LOW⚡	…02L.07p2axhnd/kernel/linux-4.1/scripts/recordmcount.pl	572	# Step 5: set up each local function as a global	COMMENT
LOW⚡	…02L.07p2axhnd/kernel/linux-4.1/scripts/recordmcount.pl	577	# Step 6: Link the global version to our list.	COMMENT
LOW⚡	…02L.07p2axhnd/kernel/linux-4.1/scripts/recordmcount.pl	582	# Step 7: Convert the local functions back into local symbols	COMMENT
LOW⚡	…02L.07p2axhnd/kernel/linux-4.1/scripts/recordmcount.pl	594	# Step 8: Link the object with our list of call sites object.	COMMENT
LOW⚡	…02L.07p2axhnd/kernel/linux-4.1/scripts/recordmcount.pl	599	# Step 9: Move the result back to the original object.	COMMENT
LOW	…02L.07p2axhnd/kernel/linux-4.1/scripts/recordmcount.pl	411	# Step 1: find all the local (static functions) and weak symbols.	COMMENT
LOW	…02L.07p2axhnd/kernel/linux-4.1/scripts/recordmcount.pl	469	# Step 2: find the sections and mcount call sites	COMMENT
LOW⚡	….02axhnd.675x/kernel/linux-4.1/scripts/recordmcount.pl	550	# Step 3: Compile the file that holds the list of call sites to mcount.	COMMENT
LOW⚡	….02axhnd.675x/kernel/linux-4.1/scripts/recordmcount.pl	557	# Step 4: Do we have sections that started with local functions?	COMMENT
LOW⚡	….02axhnd.675x/kernel/linux-4.1/scripts/recordmcount.pl	572	# Step 5: set up each local function as a global	COMMENT
LOW⚡	….02axhnd.675x/kernel/linux-4.1/scripts/recordmcount.pl	577	# Step 6: Link the global version to our list.	COMMENT
LOW⚡	….02axhnd.675x/kernel/linux-4.1/scripts/recordmcount.pl	582	# Step 7: Convert the local functions back into local symbols	COMMENT
LOW⚡	….02axhnd.675x/kernel/linux-4.1/scripts/recordmcount.pl	594	# Step 8: Link the object with our list of call sites object.	COMMENT
LOW⚡	….02axhnd.675x/kernel/linux-4.1/scripts/recordmcount.pl	599	# Step 9: Move the result back to the original object.	COMMENT
LOW	….02axhnd.675x/kernel/linux-4.1/scripts/recordmcount.pl	411	# Step 1: find all the local (static functions) and weak symbols.	COMMENT
LOW	….02axhnd.675x/kernel/linux-4.1/scripts/recordmcount.pl	469	# Step 2: find the sections and mcount call sites	COMMENT
LOW⚡	…-rt-5.02axhnd/kernel/linux-4.1/scripts/recordmcount.pl	550	# Step 3: Compile the file that holds the list of call sites to mcount.	COMMENT
LOW⚡	…-rt-5.02axhnd/kernel/linux-4.1/scripts/recordmcount.pl	557	# Step 4: Do we have sections that started with local functions?	COMMENT
LOW⚡	…-rt-5.02axhnd/kernel/linux-4.1/scripts/recordmcount.pl	572	# Step 5: set up each local function as a global	COMMENT
LOW⚡	…-rt-5.02axhnd/kernel/linux-4.1/scripts/recordmcount.pl	577	# Step 6: Link the global version to our list.	COMMENT
LOW⚡	…-rt-5.02axhnd/kernel/linux-4.1/scripts/recordmcount.pl	582	# Step 7: Convert the local functions back into local symbols	COMMENT
LOW⚡	…-rt-5.02axhnd/kernel/linux-4.1/scripts/recordmcount.pl	594	# Step 8: Link the object with our list of call sites object.	COMMENT
LOW⚡	…-rt-5.02axhnd/kernel/linux-4.1/scripts/recordmcount.pl	599	# Step 9: Move the result back to the original object.	COMMENT
LOW	…-rt-5.02axhnd/kernel/linux-4.1/scripts/recordmcount.pl	411	# Step 1: find all the local (static functions) and weak symbols.	COMMENT
LOW	…-rt-5.02axhnd/kernel/linux-4.1/scripts/recordmcount.pl	469	# Step 2: find the sections and mcount call sites	COMMENT
LOW	…er-sysdep.rt-be96u/obuspa/obuspa/src/core/data_model.c	3091	dm_instances_t inst; // NOTE: This function only makes use of the node aspect of this structure	CODE
LOW	…sysdep.rt-be96u/obuspa/obuspa/src/core/path_resolver.c	431	// NOTE: This function may be called recursively if it is time to call the refresh instances vendor hook	COMMENT
LOW	…/router-sysdep.rt-be96u/obuspa/obuspa/src/core/stomp.c	1757	// NOTE: This function is non-blocking, and will return an eror if it needs to read	COMMENT
LOW	…uter-sysdep.rt-be96u/obuspa/obuspa/src/core/wsclient.c	851	// NOTE: This function takes ownership of host, path and cont_endpoint_id from the message	COMMENT
LOW	…uter-sysdep.rt-be96u/obuspa/obuspa/src/core/wsclient.c	1062	// NOTE: This function takes ownership of cont_endpoint_id from the message	COMMENT
LOW	…uter-sysdep.rt-be96u/obuspa/obuspa/src/core/wsclient.c	1082	// NOTE: This function takes ownership of host and path from the message	COMMENT
LOW	…er-sysdep.rt-be96u/obuspa/obuspa/src/include/usp_api.h	249	// NOTE: This function returns a value which may be overridden by an entry in the USP database	COMMENT
LOW	…er-sysdep.rt-be96u/obuspa/obuspa/src/include/usp_api.h	253	// NOTE: This function returns a value which may be overridden by an entry in the USP database	COMMENT
LOW	…er-sysdep.rt-be92u/obuspa/obuspa/src/core/data_model.c	3091	dm_instances_t inst; // NOTE: This function only makes use of the node aspect of this structure	CODE
LOW	…sysdep.rt-be92u/obuspa/obuspa/src/core/path_resolver.c	431	// NOTE: This function may be called recursively if it is time to call the refresh instances vendor hook	COMMENT
LOW	…/router-sysdep.rt-be92u/obuspa/obuspa/src/core/stomp.c	1757	// NOTE: This function is non-blocking, and will return an eror if it needs to read	COMMENT
LOW	…uter-sysdep.rt-be92u/obuspa/obuspa/src/core/wsclient.c	851	// NOTE: This function takes ownership of host, path and cont_endpoint_id from the message	COMMENT
LOW	…uter-sysdep.rt-be92u/obuspa/obuspa/src/core/wsclient.c	1062	// NOTE: This function takes ownership of cont_endpoint_id from the message	COMMENT
LOW	…uter-sysdep.rt-be92u/obuspa/obuspa/src/core/wsclient.c	1082	// NOTE: This function takes ownership of host and path from the message	COMMENT
LOW	…er-sysdep.rt-be92u/obuspa/obuspa/src/include/usp_api.h	249	// NOTE: This function returns a value which may be overridden by an entry in the USP database	COMMENT
LOW	…er-sysdep.rt-be92u/obuspa/obuspa/src/include/usp_api.h	253	// NOTE: This function returns a value which may be overridden by an entry in the USP database	COMMENT
LOW	…er-sysdep.rt-be88u/obuspa/obuspa/src/core/data_model.c	3091	dm_instances_t inst; // NOTE: This function only makes use of the node aspect of this structure	CODE
LOW	…sysdep.rt-be88u/obuspa/obuspa/src/core/path_resolver.c	431	// NOTE: This function may be called recursively if it is time to call the refresh instances vendor hook	COMMENT
LOW	…/router-sysdep.rt-be88u/obuspa/obuspa/src/core/stomp.c	1757	// NOTE: This function is non-blocking, and will return an eror if it needs to read	COMMENT
LOW	…uter-sysdep.rt-be88u/obuspa/obuspa/src/core/wsclient.c	851	// NOTE: This function takes ownership of host, path and cont_endpoint_id from the message	COMMENT
LOW	…uter-sysdep.rt-be88u/obuspa/obuspa/src/core/wsclient.c	1062	// NOTE: This function takes ownership of cont_endpoint_id from the message	COMMENT
LOW	…uter-sysdep.rt-be88u/obuspa/obuspa/src/core/wsclient.c	1082	// NOTE: This function takes ownership of host and path from the message	COMMENT
LOW	…er-sysdep.rt-be88u/obuspa/obuspa/src/include/usp_api.h	249	// NOTE: This function returns a value which may be overridden by an entry in the USP database	COMMENT
LOW	…er-sysdep.rt-be88u/obuspa/obuspa/src/include/usp_api.h	253	// NOTE: This function returns a value which may be overridden by an entry in the USP database	COMMENT
77 more matches not shown…

AI Structural Patterns199 hits · 167 pts

Severity	File	Line	Context
LOW	…nsource/router_tools/hostapd/tests/hwsim/test_ap_ft.py	131	CODE
LOW	…nsource/router_tools/hostapd/tests/hwsim/test_ap_ft.py	1001	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_radius.py	1154	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	362	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	1003	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	3880	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_macsec.py	265	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_macsec.py	731	CODE
LOW	…ce/router_tools/hostapd/tests/hwsim/test_fst_config.py	316	CODE
LOW	…ce/router_tools/hostapd/tests/hwsim/test_fst_config.py	336	CODE
LOW	…opensource/router_tools/hostapd/tests/hwsim/hostapd.py	453	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dfs.py	29	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_wpas_mesh.py	348	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/hwsim_utils.py	35	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/hwsim_utils.py	82	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/hwsim_utils.py	169	CODE
LOW	…urce/router_tools/hostapd/tests/hwsim/wpasupplicant.py	205	CODE
LOW	…urce/router_tools/hostapd/tests/hwsim/wpasupplicant.py	798	CODE
LOW	…urce/router_tools/hostapd/tests/hwsim/wpasupplicant.py	1528	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/p2p_utils.py	274	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_wnm.py	36	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_hs20.py	4653	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_ibss.py	51	CODE
LOW	…ensource/router_tools/hostapd/tests/hwsim/test_fils.py	662	CODE
LOW	…opensource/router_tools/hostapd/tests/remote/rutils.py	461	CODE
LOW	…opensource/router_tools/hostapd/tests/remote/rutils.py	521	CODE
LOW	…/router_tools/wpa_supplicant/tests/hwsim/test_ap_ft.py	131	CODE
LOW	…/router_tools/wpa_supplicant/tests/hwsim/test_ap_ft.py	1001	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/test_radius.py	1154	CODE
LOW	…ce/router_tools/wpa_supplicant/tests/hwsim/test_dpp.py	362	CODE
LOW	…ce/router_tools/wpa_supplicant/tests/hwsim/test_dpp.py	1003	CODE
LOW	…ce/router_tools/wpa_supplicant/tests/hwsim/test_dpp.py	3880	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/test_macsec.py	265	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/test_macsec.py	731	CODE
LOW	…er_tools/wpa_supplicant/tests/hwsim/test_fst_config.py	316	CODE
LOW	…er_tools/wpa_supplicant/tests/hwsim/test_fst_config.py	336	CODE
LOW	…rce/router_tools/wpa_supplicant/tests/hwsim/hostapd.py	453	CODE
LOW	…ce/router_tools/wpa_supplicant/tests/hwsim/test_dfs.py	29	CODE
LOW	…ter_tools/wpa_supplicant/tests/hwsim/test_wpas_mesh.py	348	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/hwsim_utils.py	35	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/hwsim_utils.py	82	CODE
LOW	…router_tools/wpa_supplicant/tests/hwsim/hwsim_utils.py	169	CODE
LOW	…uter_tools/wpa_supplicant/tests/hwsim/wpasupplicant.py	205	CODE
LOW	…uter_tools/wpa_supplicant/tests/hwsim/wpasupplicant.py	798	CODE
LOW	…uter_tools/wpa_supplicant/tests/hwsim/wpasupplicant.py	1528	CODE
LOW	…e/router_tools/wpa_supplicant/tests/hwsim/p2p_utils.py	274	CODE
LOW	…ce/router_tools/wpa_supplicant/tests/hwsim/test_wnm.py	36	CODE
LOW	…outer_tools/wpa_supplicant/tests/hwsim/test_ap_hs20.py	4653	CODE
LOW	…e/router_tools/wpa_supplicant/tests/hwsim/test_ibss.py	51	CODE
LOW	…e/router_tools/wpa_supplicant/tests/hwsim/test_fils.py	662	CODE
LOW	…rce/router_tools/wpa_supplicant/tests/remote/rutils.py	461	CODE
LOW	…rce/router_tools/wpa_supplicant/tests/remote/rutils.py	521	CODE
LOW	…675x/bootloaders/u-boot-2019.07/tools/dtoc/fdt_util.py	113	CODE
LOW	…/bootloaders/u-boot-2019.07/test/py/multiplexed_log.py	338	CODE
LOW	…linux-4.19/tools/testing/selftests/bpf/test_offload.py	465	CODE
LOW	…linux-4.19/tools/testing/selftests/bpf/test_offload.py	481	CODE
LOW	…nsource/router_tools/hostapd/tests/hwsim/test_ap_ft.py	131	CODE
LOW	…source/router_tools/hostapd/tests/hwsim/test_radius.py	1155	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	307	CODE
LOW	…pensource/router_tools/hostapd/tests/hwsim/test_dpp.py	940	CODE
139 more matches not shown…

AI Response Leakage14 hits · 100 pts

Severity	File	Line	Snippet	Context
HIGH	…-3.5.8/docs/htmldocs/Samba3-ByExample/ntmigration.html	186	to be migrated are shown in <a class="link" href="ntmigration.html#NT4DUM" title="Figure�9.2.�View of Accounts in NT4 D	CODE
HIGH	…a-3.5.8/lib/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	263	/// <remarks>In this implementation, this method does nothing. This is because excessive	COMMENT
HIGH	…a-3.5.8/lib/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	273	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT
HIGH	…a-3.5.8/lib/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	290	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT
HIGH	release/src/router/rsyslog/tests/asynwr_deadlock.sh	3	# caused a deadlock on shutdown. I have added it to the test suite to automatically	COMMENT
HIGH	release/src/router/rsyslog/tests/asynwr_deadlock_2.sh	3	# caused a deadlock on shutdown. I have added it to the test suite to automatically	COMMENT
HIGH	…/src/router/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	263	/// <remarks>In this implementation, this method does nothing. This is because excessive	COMMENT
HIGH	…/src/router/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	273	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT
HIGH	…/src/router/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	290	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT
HIGH	…source/docs/htmldocs/Samba3-ByExample/ntmigration.html	186	to be migrated are shown in <a class="link" href="ntmigration.html#NT4DUM" title="Figure�9.2.�View of Accounts in NT4 D	CODE
HIGH	…/source/lib/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	263	/// <remarks>In this implementation, this method does nothing. This is because excessive	COMMENT
HIGH	…/source/lib/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	273	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT
HIGH	…/source/lib/zlib/contrib/dotzlib/DotZLib/GZipStream.cs	290	/// <remarks>In this implementation this property is not supported</remarks>	COMMENT
HIGH	release/src/router/busybox/debianutils/run_parts.c	34	//config: In this implementation of run-parts some features (such as report	COMMENT

Modern Structural Boilerplate93 hits · 93 pts

Severity	File	Line	Snippet	Context
LOW	…s/opensource/router_tools/libnl/python/netlink/core.py	38	__all__ = [	CODE
LOW	…source/router_tools/libnl/python/netlink/route/link.py	40	__all__ = [	CODE
LOW	…ensource/router_tools/libnl/python/netlink/route/tc.py	6	__all__ = [	CODE
LOW	…rce/router_tools/libnl/python/netlink/route/address.py	12	__all__ = [	CODE
LOW	…/router_tools/libnl/python/netlink/route/links/inet.py	11	__all__ = [	CODE
LOW	…router_tools/libnl/python/netlink/route/links/dummy.py	11	__all__ = [	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_nfc_p2p.py	10	logger = logging.getLogger(__name__)	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_vlan.py	13	logger = logging.getLogger(__name__)	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_ap_config.py	11	logger = logging.getLogger(__name__)	CODE
LOW	…outer_tools/wpa_supplicant/tests/hwsim/test_nfc_p2p.py	10	logger = logging.getLogger(__name__)	CODE
LOW	…outer_tools/wpa_supplicant/tests/hwsim/test_ap_vlan.py	13	logger = logging.getLogger(__name__)	CODE
LOW	…ter_tools/wpa_supplicant/tests/hwsim/test_ap_config.py	11	logger = logging.getLogger(__name__)	CODE
LOW	…5x/bootloaders/u-boot-2019.07/tools/patman/__init__.py	1	__all__ = ['checkpatch', 'command', 'commit', 'cros_subprocess',	CODE
LOW	…s/opensource/router_tools/libnl/python/netlink/core.py	38	__all__ = [	CODE
LOW	…source/router_tools/libnl/python/netlink/route/link.py	40	__all__ = [	CODE
LOW	…ensource/router_tools/libnl/python/netlink/route/tc.py	6	__all__ = [	CODE
LOW	…rce/router_tools/libnl/python/netlink/route/address.py	12	__all__ = [	CODE
LOW	…/router_tools/libnl/python/netlink/route/links/inet.py	11	__all__ = [	CODE
LOW	…router_tools/libnl/python/netlink/route/links/dummy.py	11	__all__ = [	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_nfc_p2p.py	10	logger = logging.getLogger(__name__)	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_vlan.py	13	logger = logging.getLogger(__name__)	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_ap_config.py	11	logger = logging.getLogger(__name__)	CODE
LOW	…outer_tools/wpa_supplicant/tests/hwsim/test_nfc_p2p.py	10	logger = logging.getLogger(__name__)	CODE
LOW	…outer_tools/wpa_supplicant/tests/hwsim/test_ap_vlan.py	13	logger = logging.getLogger(__name__)	CODE
LOW	…ter_tools/wpa_supplicant/tests/hwsim/test_ap_config.py	11	logger = logging.getLogger(__name__)	CODE
LOW	…s/opensource/router_tools/libnl/python/netlink/core.py	38	__all__ = [	CODE
LOW	…source/router_tools/libnl/python/netlink/route/link.py	40	__all__ = [	CODE
LOW	…ensource/router_tools/libnl/python/netlink/route/tc.py	6	__all__ = [	CODE
LOW	…rce/router_tools/libnl/python/netlink/route/address.py	12	__all__ = [	CODE
LOW	…/router_tools/libnl/python/netlink/route/links/inet.py	11	__all__ = [	CODE
LOW	…router_tools/libnl/python/netlink/route/links/dummy.py	11	__all__ = [	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_nfc_p2p.py	10	logger = logging.getLogger(__name__)	CODE
LOW	…ource/router_tools/hostapd/tests/hwsim/test_ap_vlan.py	13	logger = logging.getLogger(__name__)	CODE
LOW	…rce/router_tools/hostapd/tests/hwsim/test_ap_config.py	11	logger = logging.getLogger(__name__)	CODE
LOW	…outer_tools/wpa_supplicant/tests/hwsim/test_nfc_p2p.py	10	logger = logging.getLogger(__name__)	CODE
LOW	…outer_tools/wpa_supplicant/tests/hwsim/test_ap_vlan.py	13	logger = logging.getLogger(__name__)	CODE
LOW	…ter_tools/wpa_supplicant/tests/hwsim/test_ap_config.py	11	logger = logging.getLogger(__name__)	CODE
LOW	…s/opensource/router_tools/libnl/python/netlink/core.py	38	__all__ = [	CODE
LOW	…source/router_tools/libnl/python/netlink/route/link.py	40	__all__ = [	CODE
LOW	…ensource/router_tools/libnl/python/netlink/route/tc.py	6	__all__ = [	CODE
LOW	…rce/router_tools/libnl/python/netlink/route/address.py	12	__all__ = [	CODE
LOW	…/router_tools/libnl/python/netlink/route/links/inet.py	11	__all__ = [	CODE
LOW	…router_tools/libnl/python/netlink/route/links/dummy.py	11	__all__ = [	CODE
LOW	…s/opensource/router_tools/libnl/python/netlink/core.py	38	__all__ = [	CODE
LOW	…source/router_tools/libnl/python/netlink/route/link.py	40	__all__ = [	CODE
LOW	…ensource/router_tools/libnl/python/netlink/route/tc.py	6	__all__ = [	CODE
LOW	…rce/router_tools/libnl/python/netlink/route/address.py	12	__all__ = [	CODE
LOW	…/router_tools/libnl/python/netlink/route/links/inet.py	11	__all__ = [	CODE
LOW	…router_tools/libnl/python/netlink/route/links/dummy.py	11	__all__ = [	CODE
LOW	…s/opensource/router_tools/libnl/python/netlink/core.py	38	__all__ = [	CODE
LOW	…source/router_tools/libnl/python/netlink/route/link.py	40	__all__ = [	CODE
LOW	…ensource/router_tools/libnl/python/netlink/route/tc.py	6	__all__ = [	CODE
LOW	…rce/router_tools/libnl/python/netlink/route/address.py	12	__all__ = [	CODE
LOW	…/router_tools/libnl/python/netlink/route/links/inet.py	11	__all__ = [	CODE
LOW	…router_tools/libnl/python/netlink/route/links/dummy.py	11	__all__ = [	CODE
LOW	…16/bootloaders/u-boot-2019.07/tools/patman/__init__.py	1	__all__ = ['checkpatch', 'command', 'commit', 'cros_subprocess',	CODE
LOW	release/src/router/libnl/python/netlink/core.py	38	__all__ = [	CODE
LOW	release/src/router/libnl/python/netlink/route/link.py	40	__all__ = [	CODE
LOW	release/src/router/libnl/python/netlink/route/tc.py	6	__all__ = [	CODE
LOW	…lease/src/router/libnl/python/netlink/route/address.py	12	__all__ = [	CODE
33 more matches not shown…

Example Usage Blocks56 hits · 87 pts

Severity	File	Line	Snippet	Context
LOW	…04axhnd.675x/bootloaders/u-boot-2019.07/tools/rkmux.py	5	# Usage:	COMMENT
LOW	…ootloaders/u-boot-2019.07/test/stdint/test-includes.sh	8	# Usage:	COMMENT
LOW	….675x/bootloaders/u-boot-2019.07/scripts/checkstack.pl	18	# Usage:	COMMENT
LOW	…75x/kernel/linux-4.19/Documentation/s390/config3270.sh	5	# Usage:	COMMENT
LOW	…l/linux-4.19/tools/memory-model/scripts/checklitmus.sh	10	# Usage:	COMMENT
LOW	…inux-4.19/tools/memory-model/scripts/checkalllitmus.sh	11	# Usage:	COMMENT
LOW	…5.04axhnd.675x/kernel/linux-4.19/scripts/checkstack.pl	20	# Usage:	COMMENT
LOW	…4axhnd.675x/kernel/linux-4.19/scripts/checksyscalls.sh	9	# Usage:	COMMENT
LOW	…/wl/impl69/main/components/chipscripts/abandon-diff.py	10	# Usage:	COMMENT
LOW	…xhnd/kernel/linux-4.1/Documentation/s390/config3270.sh	5	# Usage:	COMMENT
LOW	…axhnd/kernel/linux-4.1/arch/x86/tools/calc_run_size.sh	6	# Usage:	COMMENT
LOW	…5.02L.07p2axhnd/kernel/linux-4.1/scripts/checkstack.pl	19	# Usage:	COMMENT
LOW	…2L.07p2axhnd/kernel/linux-4.1/scripts/checksyscalls.sh	8	# Usage:	COMMENT
LOW	…675x/kernel/linux-4.1/Documentation/s390/config3270.sh	5	# Usage:	COMMENT
LOW	….675x/kernel/linux-4.1/arch/x86/tools/calc_run_size.sh	6	# Usage:	COMMENT
LOW	…-5.02axhnd.675x/kernel/linux-4.1/scripts/checkstack.pl	19	# Usage:	COMMENT
LOW	…02axhnd.675x/kernel/linux-4.1/scripts/checksyscalls.sh	8	# Usage:	COMMENT
LOW	…source/curl/curl-7.35.0/docs/examples/version-check.pl	34	# Usage:	COMMENT
LOW	…xhnd/kernel/linux-4.1/Documentation/s390/config3270.sh	5	# Usage:	COMMENT
LOW	…axhnd/kernel/linux-4.1/arch/x86/tools/calc_run_size.sh	6	# Usage:	COMMENT
LOW	…rc-rt-5.02axhnd/kernel/linux-4.1/scripts/checkstack.pl	19	# Usage:	COMMENT
LOW	…rt-5.02axhnd/kernel/linux-4.1/scripts/checksyscalls.sh	8	# Usage:	COMMENT
LOW	…source/curl/curl-7.35.0/docs/examples/version-check.pl	34	# Usage:	COMMENT
LOW	…source/curl/curl-7.35.0/docs/examples/version-check.pl	34	# Usage:	COMMENT
LOW	…04behnd.4916/bootloaders/u-boot-2019.07/tools/rkmux.py	5	# Usage:	COMMENT
LOW	…ootloaders/u-boot-2019.07/test/stdint/test-includes.sh	8	# Usage:	COMMENT
LOW	….4916/bootloaders/u-boot-2019.07/scripts/checkstack.pl	18	# Usage:	COMMENT
LOW	…916/kernel/linux-4.19/Documentation/s390/config3270.sh	5	# Usage:	COMMENT
LOW	…l/linux-4.19/tools/memory-model/scripts/checklitmus.sh	10	# Usage:	COMMENT
LOW	…inux-4.19/tools/memory-model/scripts/checkalllitmus.sh	11	# Usage:	COMMENT
LOW	…5.04behnd.4916/kernel/linux-4.19/scripts/checkstack.pl	20	# Usage:	COMMENT
LOW	…4behnd.4916/kernel/linux-4.19/scripts/checksyscalls.sh	9	# Usage:	COMMENT
LOW	release/src/router/acme.sh/dnsapi/dns_acmedns.sh	7	# Usage:	COMMENT
LOW	release/src/router/acme.sh/dnsapi/dns_autodns.sh	12	# Usage:	COMMENT
LOW	release/src/router/acme.sh/dnsapi/dns_schlundtech.sh	12	# Usage:	COMMENT
LOW	release/src/router/acme.sh/dnsapi/dns_ionos.sh	5	# Usage:	COMMENT
LOW	release/src/router/acme.sh/dnsapi/dns_openprovider.sh	11	# Usage:	COMMENT
LOW	release/src/router/acme.sh/dnsapi/dns_servercow.sh	6	# Usage:	COMMENT
LOW	…/router/asusnatnl/pjproject-1.12/tests/pjsua/runall.py	10	# Usage:	COMMENT
LOW	release/src/router/busybox/modutils/depmod_process.sh	6	# Usage:	COMMENT
LOW	release/src/router/busybox/scripts/checkstack.pl	18	# Usage:	COMMENT
LOW	release/src/router/curl/tests/libtest/mk-lib1521.pl	28	# Usage:	COMMENT
LOW	release/src/router/curl/docs/examples/version-check.pl	36	# Usage:	COMMENT
LOW	…cal-2.0.0/src/Net-ICal-Libical/lib/Net/ICal/Libical.pm	237	#Usage:	COMMENT
LOW	…cal-2.0.0/src/Net-ICal-Libical/lib/Net/ICal/Libical.pm	248	#Usage:	COMMENT
LOW	…cal-2.0.0/src/Net-ICal-Libical/lib/Net/ICal/Libical.pm	262	#Usage:	COMMENT
LOW⚡	…cal-2.0.0/src/Net-ICal-Libical/lib/Net/ICal/Libical.pm	275	#Usage:	COMMENT
LOW⚡	…cal-2.0.0/src/Net-ICal-Libical/lib/Net/ICal/Libical.pm	283	#Usage:	COMMENT
LOW⚡	…cal-2.0.0/src/Net-ICal-Libical/lib/Net/ICal/Libical.pm	290	#Usage:	COMMENT
LOW⚡	…cal-2.0.0/src/Net-ICal-Libical/lib/Net/ICal/Libical.pm	300	#Usage:	COMMENT
LOW	release/src/router/tor/src/test/zero_length_keys.sh	5	# Usage:	COMMENT
LOW	release/src/router/libhostapi/dump_mib.sh	2	# Usage:	COMMENT
LOW	…ase/src/router/db-4.8.30/perl/BerkeleyDB/BerkeleyDB.pm	663	# Usage:	COMMENT
LOW	…ase/src/router/db-4.8.30/perl/BerkeleyDB/BerkeleyDB.pm	781	# Usage:	COMMENT
LOW	…ase/src/router/db-4.8.30/perl/BerkeleyDB/BerkeleyDB.pm	1300	# Usage:	COMMENT
LOW	…ase/src/router/db-4.8.30/perl/BerkeleyDB/BerkeleyDB.pm	1385	# Usage:	COMMENT

Docstring Block Structure13 hits · 65 pts

Severity	File	Line	Snippet	Context
HIGH	…5x/bootloaders/u-boot-2019.07/tools/binman/bsection.py	346	Look up a symbol in an ELF file Looks up a symbol in an ELF file. Only entry types which come from an E	STRING
HIGH	….675x/bootloaders/u-boot-2019.07/tools/binman/entry.py	425	Get the value of an entry argument or device-tree-node property Some node properties can be provided as argumen	STRING
HIGH	…675x/bootloaders/u-boot-2019.07/tools/dtoc/fdt_util.py	193	Get a value of a given type from a property Args: node: Node object to read from propname: property	STRING
HIGH	…xhnd.675x/bootloaders/u-boot-2019.07/tools/dtoc/fdt.py	587	Get all properties from a node. Args: node: Full path to node name to look in. Returns:	STRING
HIGH	…75x/bootloaders/u-boot-2019.07/tools/patman/gitutil.py	432	If an email address is an alias, look it up and return the full name TODO: Why not just use git's own alias feature	STRING
HIGH	…ponents/opensource/curl/curl-7.35.0/tests/http_pipe.py	85	Finds HTTP requests in \|data\|. Args: data: (String) Newly received input data from the socket. Returns:	STRING
HIGH	…ponents/opensource/curl/curl-7.35.0/tests/http_pipe.py	85	Finds HTTP requests in \|data\|. Args: data: (String) Newly received input data from the socket. Returns:	STRING
HIGH	…ponents/opensource/curl/curl-7.35.0/tests/http_pipe.py	85	Finds HTTP requests in \|data\|. Args: data: (String) Newly received input data from the socket. Returns:	STRING
HIGH	…16/bootloaders/u-boot-2019.07/tools/binman/bsection.py	346	Look up a symbol in an ELF file Looks up a symbol in an ELF file. Only entry types which come from an E	STRING
HIGH	….4916/bootloaders/u-boot-2019.07/tools/binman/entry.py	425	Get the value of an entry argument or device-tree-node property Some node properties can be provided as argumen	STRING
HIGH	…4916/bootloaders/u-boot-2019.07/tools/dtoc/fdt_util.py	193	Get a value of a given type from a property Args: node: Node object to read from propname: property	STRING
HIGH	…ehnd.4916/bootloaders/u-boot-2019.07/tools/dtoc/fdt.py	587	Get all properties from a node. Args: node: Full path to node name to look in. Returns:	STRING
HIGH	…916/bootloaders/u-boot-2019.07/tools/patman/gitutil.py	432	If an email address is an alias, look it up and return the full name TODO: Why not just use git's own alias feature	STRING

TODO Padding25 hits · 38 pts

Severity	File	Line	Snippet	Context
LOW	…r-sysdep.rt-ax86u_pro/fdt/dtc-1.5.1/tests/run_tests.sh	906	# TODO: Add tests for verbose mode?	COMMENT
LOW	…er-sysdep.gt-axe16000/fdt/dtc-1.5.1/tests/run_tests.sh	906	# TODO: Add tests for verbose mode?	COMMENT
LOW	…sysdep.gt-ax11000_pro/fdt/dtc-1.5.1/tests/run_tests.sh	906	# TODO: Add tests for verbose mode?	COMMENT
LOW	…5x/router-sysdep.xt12/fdt/dtc-1.5.1/tests/run_tests.sh	906	# TODO: Add tests for verbose mode?	COMMENT
LOW	…r-sysdep.rt-ax88u_pro/fdt/dtc-1.5.1/tests/run_tests.sh	906	# TODO: Add tests for verbose mode?	COMMENT
LOW	…uter-sysdep.gt-ax6000/fdt/dtc-1.5.1/tests/run_tests.sh	906	# TODO: Add tests for verbose mode?	COMMENT
LOW	…l/linux-4.19/drivers/net/wireless/broadcom/b43/phy_g.c	3020	//TODO: implement rev1 workaround	COMMENT
LOW	…xhnd/kernel/linux-4.1/drivers/net/wireless/b43/phy_g.c	3005	//TODO: implement rev1 workaround	COMMENT
LOW	…675x/kernel/linux-4.1/drivers/net/wireless/b43/phy_g.c	3005	//TODO: implement rev1 workaround	COMMENT
LOW	…xhnd/kernel/linux-4.1/drivers/net/wireless/b43/phy_g.c	3005	//TODO: implement rev1 workaround	COMMENT
LOW	…outer-sysdep.rt-be96u/fdt/dtc-1.7.0/tests/run_tests.sh	969	# TODO: Add tests for verbose mode?	COMMENT
LOW	…outer-sysdep.rt-be92u/fdt/dtc-1.7.0/tests/run_tests.sh	969	# TODO: Add tests for verbose mode?	COMMENT
LOW	…outer-sysdep.rt-be88u/fdt/dtc-1.7.0/tests/run_tests.sh	969	# TODO: Add tests for verbose mode?	COMMENT
LOW	…ter-sysdep.rt-be58_go/fdt/dtc-1.7.0/tests/run_tests.sh	969	# TODO: Add tests for verbose mode?	COMMENT
LOW	…outer-sysdep.rt-be86u/fdt/dtc-1.7.0/tests/run_tests.sh	969	# TODO: Add tests for verbose mode?	COMMENT
LOW	…er-sysdep.gt-be98_pro/fdt/dtc-1.7.0/tests/run_tests.sh	969	# TODO: Add tests for verbose mode?	COMMENT
LOW	…l/linux-4.19/drivers/net/wireless/broadcom/b43/phy_g.c	3020	//TODO: implement rev1 workaround	COMMENT
LOW	release/src/router/wget/tests/FTPServer.pm	155	# TODO: implement authentication?	COMMENT
LOW	release/src/router/ffmpeg/libavdevice/opengl_enc.c	23	//TODO: implement X11, Windows, Mac OS native default window. SDL 1.2 doesn't allow to render to custom thread.	COMMENT
LOW	release/src/router/ffmpeg/libavcodec/opus_silk.c	671	// TODO: implement error recovery	COMMENT
LOW	release/src/router/ffmpeg/libavcodec/j2kenc.c	1744	// TODO: implement setting non-standard precinct size	COMMENT
LOW	…ip-apps/src/symbian_ua_gui/src/symbian_ua_guiAppUi.cpp	200	// TODO: implement applicationSpecificEvent event handler	COMMENT
LOW	…ip-apps/src/symbian_ua_gui/src/symbian_ua_guiAppUi.cpp	249	// TODO: implement canceled event handler	COMMENT
LOW	release/src/router/busybox/editors/awk.c	3676	//TODO: implement -i LIBRARY and -E FILE too, they are easy-ish	COMMENT
LOW	release/src/router/busybox/util-linux/hexdump_xxd.c	53	// TODO: implement -r (see hexdump -R)	COMMENT

Overly Generic Function Names14 hits · 17 pts

Severity	File	Line	Snippet	Context
LOW⚡	…ain/components/opensource/jquerylib/jquery.flot.min.js	10	(function($){$.color={};$.color.make=function(r,g,b,a){var o={};o.r=r\|\|0;o.g=g\|\|0;o.b=b\|\|0;o.a=a!=null?a:1;o.add=functio	CODE
LOW	…87/main/components/opensource/jquerylib/jquery.flot.js	1088	function processData() {	CODE
LOW⚡	…ain/components/opensource/jquerylib/jquery.flot.min.js	10	(function($){$.color={};$.color.make=function(r,g,b,a){var o={};o.r=r\|\|0;o.g=g\|\|0;o.b=b\|\|0;o.a=a!=null?a:1;o.add=functio	CODE
LOW	…69/main/components/opensource/jquerylib/jquery.flot.js	1088	function processData() {	CODE
LOW⚡	…ain/components/opensource/jquerylib/jquery.flot.min.js	10	(function($){$.color={};$.color.make=function(r,g,b,a){var o={};o.r=r\|\|0;o.g=g\|\|0;o.b=b\|\|0;o.a=a!=null?a:1;o.add=functio	CODE
LOW	…69/main/components/opensource/jquerylib/jquery.flot.js	1088	function processData() {	CODE
LOW⚡	…ain/components/opensource/jquerylib/jquery.flot.min.js	10	(function($){$.color={};$.color.make=function(r,g,b,a){var o={};o.r=r\|\|0;o.g=g\|\|0;o.b=b\|\|0;o.a=a!=null?a:1;o.add=functio	CODE
LOW	…51/main/components/opensource/jquerylib/jquery.flot.js	1088	function processData() {	CODE
LOW⚡	…ain/components/opensource/jquerylib/jquery.flot.min.js	10	(function($){$.color={};$.color.make=function(r,g,b,a){var o={};o.r=r\|\|0;o.g=g\|\|0;o.b=b\|\|0;o.a=a!=null?a:1;o.add=functio	CODE
LOW	…03/main/components/opensource/jquerylib/jquery.flot.js	1088	function processData() {	CODE
LOW⚡	…ain/components/opensource/jquerylib/jquery.flot.min.js	10	(function($){$.color={};$.color.make=function(r,g,b,a){var o={};o.r=r\|\|0;o.g=g\|\|0;o.b=b\|\|0;o.a=a!=null?a:1;o.add=functio	CODE
LOW	…05/main/components/opensource/jquerylib/jquery.flot.js	1088	function processData() {	CODE
LOW	…ter/talloc-2.1.1/buildtools/wafsamba/samba_wildcard.py	8	def run_task(t, k):	CODE
LOW	…6.x_opwrt/source/buildtools/wafsamba/samba_wildcard.py	10	def run_task(t, k):	CODE

Magic Placeholder Names1 hit · 5 pts

Severity	File	Line	Snippet	Context
HIGH	release/src/router/inadyn/README.md	216	username = your_api_key	CODE

Modern AI Meta-Vocabulary1 hit · 3 pts

Severity	File	Line	Snippet	Context
MEDIUM	release/src/router/glib-2.59.0/gio/gtestdbus.c	366	* you can proceed to set up a GTest fixture using the #GTestDBus scaffolding.	COMMENT

RMerl/asuswrt-merlin.ng

Open-Source Code Quality, Security and Technical Debt Review