1.8

Adjusted Signal

1.8

Raw Pattern Score

100%

Time Factor

2026-10-31

Last Push

16.2K

Stars

C++

Language

4.4M

Lines of Code

19.1K

Files

7.3K

Pattern Hits

2026-10-31

Scan Date

0.01

HC Hit Rate

Risk Review · Payload v1

Use each vector to guide manual verification of the underlying findings.

Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.

Cognitive Ownership Risk 7.2/100 · LOW

Can maintainers explain intent, assumptions, and trade-offs? 6899 finding(s).

Hallucinated Dependency & Supply Chain Risk 0.6/100 · LOW

Are imports declared and package/API names verified? 118 finding(s).

Agent Over-Engineering Ratio 1.1/100 · LOW

Are wrappers, guards, and repeated structures necessary? 627 finding(s).

PR Review Velocity Impact 9.1/100 · LOW

Which changes need focused human review? 7279 finding(s).

What These Metrics Mean

Adjusted Signal: Legacy pattern score normalized per 1,000 scanned lines and multiplied by the repository-level time factor. It is not an estimate of AI authorship.
Raw Pattern Score: Sum of severity- and context-weighted pattern findings before applying the time factor.
Time Factor: A coarse multiplier based on repository last-push metadata. It does not identify when individual code was written.
Pattern Hits: Count of configured pattern findings. Review each location and surrounding code before acting.
HC Hit Rate: High- and critical-severity findings per scanned file. Severity is a configured detector weight, not proof of a vulnerability or authorship.
Lines / Files: Scan coverage denominators used by the legacy normalized score.

Pattern-Signal History

This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.

Severity Breakdown

Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.

CRITICAL 2HIGH 126MEDIUM 246LOW 6905

Directory Score Breakdown

This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.

Pattern Findings

The scanner identified 7279 distinct pattern matches across 23 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.

Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.

Over-Commented Block6343 hits · 5972 pts

Severity	File	Line	Snippet	Context
LOW	CMakeLists.txt	381	string(REGEX REPLACE "/W[0-4]" "" CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")	COMMENT
LOW	build_release_macos.sh	201	# elif which -s port; then	COMMENT
LOW	sandboxes/CMakeLists.txt	1	#add_subdirectory(slasupporttree)	COMMENT
LOW	sandboxes/orca_preset_update_demo.py	1	# /// script	COMMENT
LOW	sandboxes/orca_preset_transaction_demo.py	1	# /// script	COMMENT
LOW	sandboxes/its_neighbor_index/ItsNeighborIndex.cpp	261		COMMENT
LOW	sandboxes/its_neighbor_index/ItsNeighborIndex.cpp	341	index[face(2)].emplace_back(fi);	COMMENT
LOW	sandboxes/slasupporttree/slasupporttree.cpp	1	#include <iostream>	COMMENT
LOW	sandboxes/aabb-evaluation/aabb-evaluation.cpp	1	#include <iostream>	COMMENT
LOW	deps_src/agg/agg_rasterizer_sl_clip.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_path_storage.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_config.h	1	#ifndef AGG_CONFIG_INCLUDED	COMMENT
LOW	deps_src/agg/agg_config.h	21	//	COMMENT
LOW	deps_src/agg/agg_config.h	41	// This #define is used only for default rendering_buffer type,	COMMENT
LOW	deps_src/agg/agg_scanline_p.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_scanline_p.h	21	// Liberty Technology Systems, Inc., visit http://lib-sys.com	COMMENT
LOW	deps_src/agg/agg_array.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_renderer_scanline.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_color_gray.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_color_gray.h	21	//	COMMENT
LOW	deps_src/agg/agg_conv_transform.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_math.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_math.h	161	((x1 - x4) * dy2 - (y1 - y4) * dx2 < 0.0) !=	COMMENT
LOW	deps_src/agg/agg_math.h	341		COMMENT
LOW	deps_src/agg/agg_pixfmt_rgb.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_pixfmt_base.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_renderer_base.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_gamma_lut.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_trans_affine.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_trans_affine.h	21		COMMENT
LOW	deps_src/agg/agg_trans_affine.h	41	// "why do we need to understand and use some matrix stuff instead of just	COMMENT
LOW	deps_src/agg/agg_trans_affine.h	61	// m *= scaleY_matrix(1.5);	COMMENT
LOW	deps_src/agg/agg_trans_affine.h	121		COMMENT
LOW	deps_src/agg/agg_rasterizer_cells_aa.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_rasterizer_cells_aa.h	21	//	COMMENT
LOW	deps_src/agg/agg_rasterizer_cells_aa.h	641	// cell_type* cell = m_cells[nc >> cell_block_shift] + (nc & cell_block_mask);	COMMENT
LOW	deps_src/agg/agg_rasterizer_scanline_aa.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_rasterizer_scanline_aa.h	21	//	COMMENT
LOW	deps_src/agg/agg_rasterizer_scanline_aa.h	41	// Polygon rasterizer that is used to render filled polygons with	COMMENT
LOW	deps_src/agg/agg_clip_liang_barsky.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_clip_liang_barsky.h	41	//	COMMENT
LOW	deps_src/agg/agg_pixfmt_gray.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_rendering_buffer.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_rendering_buffer.h	281	// row_ptr_cache creates an array of pointers to rows, so, the access	COMMENT
LOW	deps_src/agg/agg_bezier_arc.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_bezier_arc.h	81	private:	COMMENT
LOW	deps_src/agg/agg_rasterizer_scanline_aa_nogamma.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_rasterizer_scanline_aa_nogamma.h	21	//	COMMENT
LOW	deps_src/agg/agg_rasterizer_scanline_aa_nogamma.h	61		COMMENT
LOW	deps_src/agg/agg_rasterizer_scanline_aa_nogamma.h	81	//	COMMENT
LOW	deps_src/agg/agg_color_rgba.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_gamma_functions.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_basics.h	1	//----------------------------------------------------------------------------	COMMENT
LOW	deps_src/agg/agg_basics.h	21		COMMENT
LOW	deps_src/agg/agg_basics.h	41		COMMENT
LOW	deps_src/agg/agg_basics.h	61	// If the compiler has different capacity of the basic types you can redefine	COMMENT
LOW	deps_src/agg/agg_basics.h	81	#ifndef AGG_INT32	COMMENT
LOW	deps_src/agg/agg_basics.h	101	#define AGG_INT64U unsigned long long	COMMENT
LOW	…ps_src/libnest2d/include/libnest2d/geometry_traits.hpp	1	#ifndef GEOMETRY_TRAITS_HPP	COMMENT
LOW	deps_src/libnest2d/include/libnest2d/libnest2d.hpp	1	#ifndef LIBNEST2D_HPP	COMMENT
6283 more matches not shown…

Decorative Section Separators167 hits · 536 pts

Severity	File	Line	Snippet	Context
MEDIUM	sandboxes/orca_preset_transaction_demo.py	32	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	sandboxes/orca_preset_transaction_demo.py	35	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	deps_src/qhull/origCMakeLists.txt	123	# ---------------------------------------	COMMENT
MEDIUM	deps_src/qhull/origCMakeLists.txt	127	# ---------------------------------------	COMMENT
MEDIUM	deps_src/qhull/origCMakeLists.txt	351	# ---------------------------------------	COMMENT
MEDIUM	deps_src/qhull/origCMakeLists.txt	353	# ---------------------------------------	COMMENT
MEDIUM⚡	deps_src/qhull/origCMakeLists.txt	368	# ---------------------------------------	COMMENT
MEDIUM⚡	deps_src/qhull/origCMakeLists.txt	371	# ---------------------------------------	COMMENT
MEDIUM⚡	deps_src/qhull/origCMakeLists.txt	377	# ---------------------------------------	COMMENT
MEDIUM⚡	deps_src/qhull/origCMakeLists.txt	381	# ---------------------------------------	COMMENT
MEDIUM	deps_src/qhull/origCMakeLists.txt	409	# ---------------------------------------	COMMENT
MEDIUM	deps_src/qhull/origCMakeLists.txt	411	# ---------------------------------------	COMMENT
MEDIUM	tests/compare_analyzer/show_temp_plot.py	122	# ── Physical timeline from G1 moves ──────────────────────────────────	COMMENT
MEDIUM	tests/compare_analyzer/show_temp_plot.py	170	# ── Scale physical timeline to match M73 trapezoid estimate ──────	COMMENT
MEDIUM	tests/compare_analyzer/show_temp_plot.py	229	# ── Fallback: M73-based interpolation (original logic) ───────────────	COMMENT
MEDIUM	tests/slic3rutils/test_plugin_resource_texture.cpp	310	// ── Validation (collect_resource_texture_files, no Python) ──────────────────────────────────────	COMMENT
MEDIUM	tests/slic3rutils/test_plugin_resource_texture.cpp	454	// ── Lifecycle through the real listing ──────────────────────────────────────────────────────────	COMMENT
MEDIUM	tests/slic3rutils/test_plugin_resource_texture.cpp	664	// ── Hostile get_texture_dir() overrides ─────────────────────────────────────────────────────────	COMMENT
MEDIUM	tests/slic3rutils/test_plugin_resource_texture.cpp	727	// ── Decoding parity ─────────────────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	tests/slic3rutils/test_plugin_resource_texture.cpp	823	// ── Wheel metadata ──────────────────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	tests/slic3rutils/test_plugin_resource_texture.cpp	865	// ── .3mf round trip ─────────────────────────────────────────────────────────────────────────────	COMMENT
MEDIUM	.claude/skills/orca-translations/scripts/po_tool.py	50	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	.claude/skills/orca-translations/scripts/po_tool.py	262	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	.claude/skills/orca-translations/scripts/po_tool.py	333	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	.claude/skills/orca-translations/scripts/po_tool.py	453	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	.claude/skills/orca-translations/scripts/po_tool.py	560	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	scripts/orca_profile_tool.py	860	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	scripts/orca_profile_tool.py	862	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	scripts/orca_profile_tool.py	987	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	scripts/orca_profile_tool.py	989	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	345	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	347	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	394	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	396	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	677	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	679	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	1933	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	1935	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2028	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2030	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2193	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2195	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2497	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2499	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2540	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2542	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2679	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2681	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2796	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2798	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2963	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	2965	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	3085	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	3087	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	3218	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	3220	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	3435	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	3437	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	3596	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	scripts/orca_profile_tool.py	3598	# ---------------------------------------------------------------------------	COMMENT
107 more matches not shown…

Cross-Language Confusion101 hits · 512 pts

Severity	File	Line	Snippet	Context
HIGH	sandboxes/orca_dock_panel_plugin_any.py	75	if (message && message.command === "objects")	CODE
HIGH	sandboxes/orca_reload_local_bundle_demo.py	297	$('message').textContent = error \|\| message \|\| '';	CODE
HIGH⚡	sandboxes/orca_reload_local_bundle_demo.py	310	if (!busy && event.target.matches('[data-toggle]')) {	CODE
HIGH⚡	sandboxes/orca_reload_local_bundle_demo.py	316	if (!button \|\| busy) return;	CODE
HIGH⚡	sandboxes/orca_reload_local_bundle_demo.py	325	if (!message \|\| message.command !== 'state') return;	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	81	"""host.BoundingBox -> dict (or None when the box is undefined)."""	STRING
HIGH	sandboxes/orca_inspector_plugin_any.py	743	['approx size', esc(vec3(d.bbox_approx && d.bbox_approx.size))],	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	848	const hit = !q \|\| tr.dataset.k.includes(q) \|\|	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	857	if (id == null \|\| id < 1) return '<span class="badge">extruder —</span>';	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	946	['raw size', esc(vec3(o.raw_bbox && o.raw_bbox.size))],	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	959	S.colors = d.filament_colors \|\| S.colors;	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	1042	pendingPreviews.push([id, d.preview.points]);	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	1057	const scaleDpr = window.devicePixelRatio \|\| 1;	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	1127	S.uiLog.push(new Date().toLocaleTimeString() + ' ' + text);	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	1259	if (msg && msg.command === 'pong')	CODE
HIGH	sandboxes/orca_inspector_plugin_any.py	1305	const hit = !q \|\| tr.dataset.k.includes(q) \|\|	CODE
HIGH⚡	sandboxes/orca_preset_update_demo.py	27	const $=id=>document.getElementById(id),S={kind:'process',slot:1,preset:'',rows:[],selected:null,busy:true,notice:'',not	CODE
HIGH⚡	sandboxes/orca_preset_update_demo.py	31	function paint(m){const notice=S.notice,noticeError=S.noticeError;S.notice='';S.noticeError=false;S.busy=false;S.kind=m.	CODE
HIGH⚡	sandboxes/orca_preset_update_demo.py	37	$('kind').onchange=()=>{S.kind=$('kind').value;S.selected=null;$('preset').value='';load()};$('slot').onchange=()=>{S.sl	CODE
HIGH	sandboxes/orca_twistify_plugin_any.py	268	var context = (window.orca && window.orca.getContext) ? window.orca.getContext() : { scope: "global" };	CODE
HIGH	sandboxes/orca_twistify_plugin_any.py	279	out[key] = num(config ? config[key] : undefined, DEFAULTS[key]);	CODE
HIGH	sandboxes/orca_twistify_plugin_any.py	294	if (form.wobble_ampl_mm !== 0 && form.wobble_period_mm > 0)	CODE
HIGH	sandboxes/orca_twistify_plugin_any.py	300	return form.twist_deg_per_mm !== 0 \|\| form.taper_per_mm !== 0 \|\| form.wobble_ampl_mm !== 0;	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	337	layers.push({ z: z, plan: plan });	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	347	svg.push('<line class="tick" x1="24" y1="' + y.toFixed(1) + '" x2="30" y2="' + y.toFixed(1) + '"/>');	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	348	svg.push('<text x="20" y="' + (y + 3).toFixed(1) + '" text-anchor="end">' + mark + '</text>');	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	350	svg.push('<text x="30" y="' + (ORIGIN_Y - Z_SPAN * Z_UNITS - 11).toFixed(1) +	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	357	svg.push('<polygon class="ring" points="' + ring + '" stroke-opacity="' +	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	359	trace.push(ring.split(" ")[1]);	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	363	svg.push('<polyline class="helix" points="' + trace.join(" ") + '"/>');	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	366	svg.push('<polygon class="datum" points="' + points(layers[0].plan, 0, fit) + '"/>');	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	382	parts.push("<b>" + (form.twist_deg_per_mm * Z_SPAN).toFixed(0) + "\\u00b0</b> of rotation");	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	384	parts.push("<b>" + top.scale.toFixed(2) + "\\u00d7</b> scale" +	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	387	parts.push("<b>\\u00b1" + form.wobble_ampl_mm.toFixed(1) + "</b> mm of wobble");	CODE
HIGH⚡	sandboxes/orca_twistify_plugin_any.py	397	if (id === "n-" + FIELDS[i].key \|\| id === "r-" + FIELDS[i].key)	CODE
HIGH	sandboxes/orca_twistify_plugin_any.py	425	if (field.neutral === undefined) return "";	CODE
HIGH	sandboxes/orca_twistify_plugin_any.py	524	if (window.orca && window.orca.onConfig) {	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	740	return fileData.tc_zones.some(z => time >= z.start_time && time <= z.end_time);	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	745	return fileData.toolchange_zones.some(z => time >= z.start_time && time <= z.end_time);	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	750	return fileData.wipe_zones.some(z => time >= z.start_time && time <= z.end_time);	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1111	if (x2 < lB \|\| x1 > rB) continue;	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1115	const is_printing1 = !in_tc1 \|\| in_wipe1;	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1116	const is_end_gcode1 = fileData.end_gcode_time && pt1.time >= fileData.end_gcode_time;	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1117	const active = isActiveOnPanel(fileData, pt1.active, heater) && is_printing1 && pt1.printing_started && !is_end_	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1119	if (active && temp1 >= 190) color = getFilColor(fileData, pt1.active);	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1133	if (x2 >= lB && x2 <= rB) {	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1136	const is_printing2 = !in_tc2 \|\| in_wipe2;	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1137	const is_end_gcode2 = fileData.end_gcode_time && pt2.time >= fileData.end_gcode_time;	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1138	const nextActive = isActiveOnPanel(fileData, pt2.active, heater) && is_printing2 && pt2.printing_started &&	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1140	if (nextActive && temp2 >= 190) nc = getFilColor(fileData, pt2.active);	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1184	const is_printing = !in_tc \|\| in_wipe;	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1185	const is_end_gcode = fileData.end_gcode_time && track[i].time >= fileData.end_gcode_time;	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1186	const on = (track[i].active === filId) && (t >= 190) && is_printing && track[i].printing_started && !is_end_gcod	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1187	if (on && aStart === -1) aStart = i;	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1188	else if (!on && aStart !== -1) { activeIdxRanges.push({ s: aStart, e: i - 1 }); aStart = -1; }	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1188	else if (!on && aStart !== -1) { activeIdxRanges.push({ s: aStart, e: i - 1 }); aStart = -1; }	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1190	if (aStart !== -1) activeIdxRanges.push({ s: aStart, e: track.length - 1 });	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1193	const isActiveIdx = (i) => activeIdxRanges.some(r => i >= r.s && i <= r.e);	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1194	const inWindow = (i) => activeIdxRanges.some(r => i >= r.s - STEPS && i <= r.e + STEPS);	CODE
HIGH⚡	tests/compare_analyzer/show_temp_plot.py	1339	const p = panels.find(pan => pan.type === 'main' && pan.file === fd && pan.heater === h);	CODE
41 more matches not shown…

Hyper-Verbose Identifiers365 hits · 264 pts

Severity	File	Line	Snippet	Context
LOW	resources/web/homepage/js/home.js	398	function ShowRecnetFileContextMenu()	CODE
LOW	resources/web/homepage/js/home.js	526	function UpdateRecentClearBtnDisplay()	CODE
LOW	resources/web/homepage/js/home.js	561	function BeginDownloadNetworkPlugin()	CODE
LOW	resources/web/dialog/js/plugin-config-ui.js	37	function BuildCustomConfigDocument(html, config, context) {	CODE
LOW	resources/web/dialog/PluginsDialog/index.js	251	function OnExploreMenuButtonKeyDown(event) {	CODE
LOW	resources/web/dialog/PluginsDialog/index.js	412	function SyncPluginListHeaderGutter() {	CODE
LOW	resources/web/dialog/PluginsDialog/index.js	912	function GetConfigurableCapabilities(plugin) {	CODE
LOW	resources/web/dialog/PluginsDialog/index.js	1027	function ClearCapabilityConfigView() {	CODE
LOW	resources/web/dialog/PluginsDialog/index.js	1160	function ApplyCapabilityConfigSaved(payload) {	CODE
LOW	resources/web/dialog/PluginsDialog/plugin-search.js	98	function ClearSearchExpandOverride() {	CODE
LOW	resources/web/dialog/PluginsConfigDialog/index.js	190	function ClearCapabilityConfigView() {	CODE
LOW	resources/web/dialog/PluginsConfigDialog/index.js	345	function ApplyCapabilityConfigSaved(payload) {	CODE
LOW	tests/compare_analyzer/compare_slices.py	379	def analyze_critical_discrepancies(f1_meta, f2_meta, f1_settings, f2_settings, f1_stats, f2_stats):	CODE
LOW	tests/compare_analyzer/compare_slices.py	567	def format_side_by_side_temp_track(f1_track, f2_track, f1_name, f2_name):	CODE
LOW	tests/compare_analyzer/compare_slices.py	752	def analyze_preheat_cooldown_events(track, nozzle_map=None):	CODE
LOW⚡	tests/compare_analyzer/show_temp_plot.py	102	def determine_heater_to_extruder(track, extruder_map):	CODE
LOW⚡	tests/compare_analyzer/show_temp_plot.py	107	def build_timeline_and_interpolate(track, tool_changes, m73_points, total_lines, m400_weights=None,	CODE
LOW	tests/compare_analyzer/show_temp_plot.py	50	def parse_filaments_and_colors(zip_file):	CODE
LOW	tests/slic3rutils/test_plugin_printer_agent.cpp	168	" def get_user_selected_machine(self): return 'machine'\n"	CODE
LOW	scripts/test_moonraker_lane_data.py	317	def pick_available_tool_number(used_tool_numbers):	CODE
LOW	scripts/test_moonraker_lane_data.py	377	def perform_random_operations(host, port, api_key=None, num_ops=5):	CODE
LOW	scripts/auto-close-duplicates.ts	49	function extractDuplicateIssueNumber(commentBody: string): number \| null {	CODE
LOW⚡	scripts/orca_profile_tool.py	864	def check_setting_id_uniqueness(profiles_dir):	CODE
LOW⚡	scripts/orca_profile_tool.py	998	def check_preset_name_uniqueness(profiles_dir, vendor):	CODE
LOW	scripts/orca_profile_tool.py	363	def generate_preset_setting_id(vendor, type_name, name):	CODE
LOW	scripts/orca_profile_tool.py	938	def check_machine_model_name_uniqueness(profiles_dir):	CODE
LOW	scripts/orca_profile_tool.py	1040	def check_filament_compatible_printers(profiles_dir, vendor):	CODE
LOW	scripts/orca_profile_tool.py	1093	def load_available_filament_profiles(profiles_dir, vendor):	CODE
LOW	scripts/orca_profile_tool.py	1112	def check_machine_default_materials(profiles_dir, vendor):	CODE
LOW	scripts/orca_profile_tool.py	2138	def replace_filament_id_value(text, old_id, new_id):	CODE
LOW	scripts/orca_profile_tool.py	3137	def legacy_compatible_printers(base_dir, profiles_dir=PROFILES_DIR):	CODE
LOW	scripts/optimize_cover_images.py	42	def optimize_png_with_pngquant(img_path, quality_range="65-80"):	CODE
LOW	scripts/optimize_cover_images.py	368	def find_and_process_cover_images(base_path, target_ratio=0.84, dry_run=False, use_pngquant=False, quality_range="65-80"	CODE
LOW	scripts/backfill-duplicate-comments.ts	72	async function backfillDuplicateComments(): Promise<void> {	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	45	def test_not_done_before_the_final_jobs_are_listed(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	48	def test_not_done_while_a_final_job_runs(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	52	def test_done_when_the_final_jobs_finished(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	55	def test_done_when_the_final_jobs_were_skipped(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	63	def test_push_reserves_before_its_macos_jobs_are_listed(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	67	def test_push_keeps_its_reserve_between_stages(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	71	def test_push_releases_when_macos_is_done(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	75	def test_queued_jobs_count_as_busy(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	79	def test_pull_request_holds_nothing_before_it_is_let_in(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	82	def test_one_arch_let_in_holds_a_runner_until_it_is_built(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	87	def test_one_arch_let_in_holds_nothing_once_it_is_built(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	93	def test_one_arch_let_in_holds_nothing_once_it_failed(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	97	def test_both_arches_let_in_hold_only_what_still_builds(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	102	def test_universal_build_and_tests_count_once_queued(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	109	def test_pull_request_releases_when_macos_is_done(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	113	def test_pull_request_without_the_line_holds_what_it_runs(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	117	def test_finished_and_non_macos_jobs_are_not_counted(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	126	def test_normal_line_yields_to_a_waiting_priority_run(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	129	def test_priority_line_does_not_count_priority_runs_behind_it(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	132	def test_a_waiting_normal_run_is_not_yielded_to(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	136	def test_a_priority_run_half_let_in_still_counts_its_waiting_arch(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	141	def test_skipped_priority_jobs_of_other_platforms_are_not_waiting(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	146	def test_measure_from_each_line(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	154	def test_own_waiting_run_is_not_counted(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	199	def test_counts_a_pending_run_that_holds_runners(self):	CODE
LOW⚡	scripts/tests/test_ci_macos_admission.py	206	def test_a_push_waiting_behind_another_holds_nothing(self):	CODE
305 more matches not shown…

AI Slop Vocabulary42 hits · 126 pts

Severity	File	Line	Snippet	Context
MEDIUM	deps_src/mcut/include/mcut/internal/cdt/utils.h	249	/// Orient p against line v1-v2 2D: robust geometric predicate	COMMENT
MEDIUM	deps_src/mcut/source/shewchuk.c	41	/* from the Web page http://www.cs.cmu.edu/~quake/robust.html . */	COMMENT
MEDIUM	deps_src/mcut/source/shewchuk.c	4368	/* from the Web page http://www.cs.cmu.edu/~quake/robust.html . */	COMMENT
MEDIUM	deps_src/md4c/src/md4c.c	2541	#define MD_MARK_OPENER 0x04 /* Definitely opener. */	COMMENT
MEDIUM	deps_src/md4c/src/md4c.c	2542	#define MD_MARK_CLOSER 0x08 /* Definitely closer. */	COMMENT
MEDIUM	deps_src/admesh/connect.cpp	63	// This method is numerically robust.	COMMENT
MEDIUM	deps_src/admesh/connect.cpp	100	// This method is numerically robust.	COMMENT
MEDIUM	deps_src/libigl/igl/WindingNumberAABB.h	262	//// Perfect matching is not robust	COMMENT
MEDIUM	deps_src/libigl/igl/arap.h	108	/// a map to the position data, allowing seamless interoperability with user-defined	COMMENT
MEDIUM	deps_src/libigl/igl/tri_tri_intersect.cpp	618	// Alec: it's hard to believe this will ever be perfectly robust, but checking	COMMENT
MEDIUM	deps_src/libigl/igl/harmonic.cpp	131	// This is not robust for k>2. See KKT system in [Jacobson et al. 2010]	COMMENT
MEDIUM	deps_src/libigl/igl/flipped_triangles.cpp	22	// https://www.cs.cmu.edu/~quake/robust.html	COMMENT
MEDIUM	deps_src/libigl/igl/sort_angles.h	15	/// Sort angles in ascending order in a numerically robust way.	COMMENT
MEDIUM	deps_src/libigl/igl/seam_edges.cpp	43	// Based on: https://www.cs.cmu.edu/~quake/robust.html	COMMENT
MEDIUM	deps_src/libigl/igl/copyleft/cgal/outer_facet.h	29	/// function is more robust because it does not rely on facet normals.	COMMENT
MEDIUM	tests/cli/test_cli_no_suitable_objects.sh	41	# Fits, so the run must succeed: proves the harness itself is sound.	COMMENT
MEDIUM	.github/workflows/parity_nightly.yml	6	# harness - the GUI-vs-CLI parity harness (metrics only, never fails)	COMMENT
MEDIUM	src/libslic3r/Preset.hpp	832	// Return index of the first compatible preset. Certainly at least the '- default -' preset shall be compatible.	COMMENT
MEDIUM⚡	src/libslic3r/Preset.hpp	859	// Return index of the first compatible preset. Certainly at least the '- default -' preset shall be compatible.	COMMENT
MEDIUM⚡	src/libslic3r/Preset.hpp	864	// Return index of the first visible preset. Certainly at least the '- default -' preset shall be visible.	COMMENT
MEDIUM⚡	src/libslic3r/Preset.hpp	865	// Return the first visible preset. Certainly at least the '- default -' preset shall be visible.	COMMENT
MEDIUM	src/libslic3r/calib.cpp	367	++i) { // this isn't the most robust way, but less expensive than finding line intersections	CODE
MEDIUM	src/libslic3r/TextureDisplacement.cpp	192	// 0 is a no-op. Wraps at the edges so a tiling height map stays seamless after smoothing. Operates on	COMMENT
MEDIUM	src/libslic3r/PrintObject.cpp	4742	// make it more robust and nicer. TODO.	COMMENT
MEDIUM	src/libslic3r/PrintObject.cpp	5294	tree_support.support_type = SupportType::stTreeAuto; // need to set support type to fully utilize the power of featu	CODE
MEDIUM	src/libslic3r/Preset.cpp	3934	// Return index of the first visible preset. Certainly at least the '- default -' preset shall be visible.	COMMENT
MEDIUM	src/libslic3r/Geometry.hpp	163	// Certainly not collinear, then the segments intersect.	COMMENT
MEDIUM	src/libslic3r/BridgeDetector.cpp	364	// not nice, we need a more robust non-numeric check	COMMENT
MEDIUM	src/libslic3r/CAD/SketchEngine.cpp	289	// vs hole by geometry and fixes orientations, which is robust to the	COMMENT
MEDIUM	src/libslic3r/Support/TreeSupport.cpp	2487	// ORCA: Use support-layer index for base-interface selection (robust with independe	COMMENT
MEDIUM	src/libslic3r/Support/SupportMaterial.cpp	874	//FIXME this test is not numerically robust. Particularly, it does not handle horizontal seg	COMMENT
MEDIUM	src/libslic3r/Support/SupportMaterial.cpp	1123	//FIXME this was quick, but not sufficiently robust.	COMMENT
MEDIUM	src/libslic3r/Support/SupportMaterial.cpp	1147	// FIXME this is quite an overkill to calculate a complete offset just to get a single point, but at least it is rob	COMMENT
MEDIUM	src/libslic3r/Arachne/WallToolPaths.cpp	503	// Simplify outline for boost::voronoi consumption. Absolutely no self intersections or near-self intersections allo	COMMENT
MEDIUM	src/libslic3r/SLA/SupportPointGenerator.cpp	206	// Absolutely hopeless overhangs are those outside the unsafe band	COMMENT
MEDIUM	src/libslic3r/Geometry/VoronoiOffset.cpp	841	// Constrained bisector of two segments. Vojtech is not quite sure whether the Voronoi generator is	COMMENT
MEDIUM	src/slic3r/plugin/PluginAuditManager.cpp	591	// four names is cheaper and more robust than replicating that; the two unused names cost one	COMMENT
MEDIUM	src/slic3r/plugin/host/PluginHostSlicing.cpp	178	// is the robust way to extract toolpaths.	COMMENT
MEDIUM	src/slic3r/GUI/GCodeViewer.cpp	1515	// correction above and the outlier-robust bbox below, the surface overlaps the	COMMENT
MEDIUM	src/slic3r/GUI/CAD/DesignPanel.hpp	771	wxSpinCtrlDouble* m_bool_tol{nullptr}; // OCCT fuzzy tolerance (mm); robust cut on near-coincident faces	CODE
MEDIUM	src/slic3r/GUI/CAD/DesignSketchTool.cpp	1948	// Centroid of the loop = the regular polygon's centre (robust if it was moved).	COMMENT
MEDIUM	src/slic3r/GUI/CAD/DesignPanel.cpp	10454	f.bool_tolerance = m_bool_tol->GetValue(); // OCCT fuzzy: robust cut on near-coincident faces	CODE

Excessive Try-Catch Wrapping73 hits · 104 pts

Severity	File	Line	Snippet	Context
LOW	sandboxes/orca_reload_local_bundle_demo.py	95	except Exception:	CODE
LOW	sandboxes/orca_reload_local_bundle_demo.py	351	except Exception as error:	CODE
LOW	sandboxes/orca_reload_local_bundle_demo.py	363	except Exception as state_error:	CODE
LOW	sandboxes/orca_reload_local_bundle_demo.py	403	except Exception as error:	CODE
MEDIUM	sandboxes/orca_reload_local_bundle_demo.py	341	def execute(self):	CODE
MEDIUM	sandboxes/orca_reload_local_bundle_demo.py	359	def _post_state(self, message="", error=""):	CODE
MEDIUM	sandboxes/orca_reload_local_bundle_demo.py	368	def on_message(self, message):	CODE
LOW	sandboxes/orca_inspector_plugin_any.py	58	except Exception:	CODE
LOW	sandboxes/orca_inspector_plugin_any.py	1407	except Exception as exc:	CODE
LOW	sandboxes/orca_inspector_plugin_any.py	1415	except Exception as exc:	CODE
LOW	sandboxes/orca_inspector_plugin_any.py	1431	except Exception as exc:	CODE
LOW	sandboxes/orca_inspector_plugin_any.py	1496	except Exception as exc:	CODE
LOW	sandboxes/orca_preset_update_demo.py	71	except Exception as error:	CODE
LOW	sandboxes/orca_preset_update_demo.py	75	except Exception as error:	CODE
LOW	sandboxes/orca_preset_update_demo.py	91	except Exception as error:	CODE
LOW	sandboxes/orca_preset_transaction_demo.py	77	except Exception as error:	CODE
LOW	tools/orca_cad_mcp_bridge.py	118	except Exception:	CODE
LOW	tools/orca_cad_mcp_bridge.py	152	except Exception as e:	CODE
LOW	tools/orca_cad_mcp_bridge.py	172	except Exception:	CODE
MEDIUM	tools/orca_cad_mcp_bridge.py	113	def list_tools():	CODE
MEDIUM⚡	tests/compare_analyzer/compare_slices.py	118	print(f"Error parsing metadata: {e}")	CODE
MEDIUM⚡	tests/compare_analyzer/compare_slices.py	128	print(f"Error parsing project_settings: {e}")	CODE
MEDIUM	tests/compare_analyzer/compare_slices.py	351	print(f"Error parsing G-code: {e}")	CODE
MEDIUM	tests/compare_analyzer/compare_slices.py	1240	print(f"Error: File '{f1_input}' not found on Desktop or local path.")	CODE
MEDIUM	tests/compare_analyzer/compare_slices.py	1243	print(f"Error: File '{f2_input}' not found on Desktop or local path.")	CODE
MEDIUM	tests/compare_analyzer/compare_slices.py	121	def parse_project_settings(zip_file):	CODE
MEDIUM	tests/compare_analyzer/compare_slices.py	511	def interpret_temp_action(desc, active_extruder):	CODE
LOW⚡	tests/compare_analyzer/compare_slices.py	117	except Exception as e:	CODE
LOW⚡	tests/compare_analyzer/compare_slices.py	127	except Exception as e:	CODE
LOW	tests/compare_analyzer/compare_slices.py	148	except Exception:	CODE
LOW	tests/compare_analyzer/compare_slices.py	350	except Exception as e:	CODE
LOW	tests/compare_analyzer/compare_slices.py	563	except Exception as e:	CODE
MEDIUM	tests/compare_analyzer/show_temp_plot.py	64	print(f"Error parsing filaments: {e}")	CODE
MEDIUM	tests/compare_analyzer/show_temp_plot.py	592	print(f"Error parsing {filepath}: {e}")	CODE
MEDIUM	tests/compare_analyzer/show_temp_plot.py	640	print("Error: Failed to parse first file.")	CODE
LOW⚡	tests/compare_analyzer/show_temp_plot.py	92	except Exception as e:	CODE
LOW	tests/compare_analyzer/show_temp_plot.py	63	except Exception as e:	CODE
LOW	tests/compare_analyzer/show_temp_plot.py	590	except Exception as e:	CODE
LOW	tests/slic3rutils/test_slicing_pipeline_config.cpp	87	except Exception as e: # what plugins' defaults-fallback code swallows silently	CODE
LOW	scripts/test_moonraker_lane_data.py	160	except Exception as e:	CODE
MEDIUM⚡	scripts/test_moonraker_lane_data.py	201	print(f"Error fetching lane data: HTTP {resp.status_code}")	CODE
LOW⚡	scripts/test_moonraker_lane_data.py	203	except Exception as e:	CODE
MEDIUM⚡	scripts/test_moonraker_lane_data.py	204	print(f"Error fetching lane data: {e}")	CODE
LOW	scripts/test_moonraker_lane_data.py	223	except Exception as e:	CODE
MEDIUM	scripts/test_moonraker_lane_data.py	224	print(f"Error setting lane data: {e}")	CODE
LOW	scripts/test_moonraker_lane_data.py	236	except Exception as e:	CODE
MEDIUM	scripts/test_moonraker_lane_data.py	237	print(f"Error deleting lane data: {e}")	CODE
MEDIUM⚡	scripts/test_moonraker_lane_data.py	435	print(f"Error: file not found: {filepath}")	CODE
MEDIUM⚡	scripts/test_moonraker_lane_data.py	438	print(f"Error: invalid JSON in {filepath}: {e}")	CODE
MEDIUM⚡	scripts/test_moonraker_lane_data.py	448	print(f"Error: expected object with lane keys, got {type(lanes).__name__}")	CODE
MEDIUM	scripts/test_moonraker_lane_data.py	459	print("Error: input JSON has duplicate tool numbers:")	CODE
LOW	scripts/check_profile.sh	484	except Exception:	CODE
LOW	scripts/optimize_cover_images.py	63	except Exception as e:	CODE
LOW	scripts/optimize_cover_images.py	361	except Exception as e:	CODE
LOW	scripts/optimize_cover_images.py	434	except Exception as e:	CODE
LOW	scripts/optimize_cover_images.py	534	except Exception:	CODE
LOW	scripts/ci_macos_admission.py	254	except Exception:	CODE
LOW	scripts/CAD/check-gui-click-edit.py	87	except Exception:	CODE
LOW	scripts/CAD/check-gui-click-edit.py	142	except Exception:	CODE
MEDIUM	scripts/CAD/check-gui-click-edit.py	84	def try_call(method, **params):	CODE
13 more matches not shown…

Empty Error Handlers19 hits · 95 pts

Severity	File	Line	Snippet	Context
HIGH	sandboxes/orca_reload_local_bundle_demo.py	106	except FileNotFoundError:	CODE
HIGH	sandboxes/orca_reload_local_bundle_demo.py	98	except OSError:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	115	except KeyError:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	348	except KeyError:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	148	except Exception:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	158	except ValueError:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	740	except ValueError:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	537	except ValueError:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	244	except ValueError:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	414	except (ValueError, IndexError):	CODE
HIGH	tests/compare_analyzer/compare_slices.py	268	except ValueError:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	295	except ValueError:	CODE
HIGH	tests/compare_analyzer/compare_slices.py	306	except ValueError:	CODE
HIGH	scripts/orca_profile_tool.py	341	except (ValueError, OSError):	CODE
HIGH	scripts/optimize_cover_images.py	534	except Exception:	CODE
HIGH	scripts/tests/test_profile_tool.py	61	except (OSError, ValueError): # commonpath raises ValueError across drives	CODE
HIGH	scripts/CAD/check-mcp-sketch.py	60	except Exception:	CODE
HIGH	scripts/CAD/check-sketch-engine.py	349	except Exception:	CODE
HIGH	scripts/CAD/check-sketch-engine.py	71	except Exception:	CODE

Verbosity Indicators37 hits · 64 pts

Severity	File	Line	Snippet	Context
LOW	…rc/libnest2d/include/libnest2d/geometry_traits_nfp.hpp	405	// Step 1: Make the orbiter reverse oriented	COMMENT
LOW	…rc/libnest2d/include/libnest2d/geometry_traits_nfp.hpp	496	// Step 2: Fill the edgelists	COMMENT
LOW	…rc/libnest2d/include/libnest2d/geometry_traits_nfp.hpp	664	// Step 4:	COMMENT
LOW	…rc/libnest2d/include/libnest2d/geometry_traits_nfp.hpp	676	// Step 5:	COMMENT
LOW	deps_src/imgui/imgui.cpp	2332	// Step 0: Let you process the first element (regardless of it being visible or not, so we can measure the element h	COMMENT
LOW	deps_src/imgui/imgui.cpp	2360	// Step 1: the clipper infer height from first element	COMMENT
LOW	deps_src/imgui/imgui.cpp	2386	// Step 2: calculate the actual range of elements to display, and position the cursor before the first element	COMMENT
LOW	deps_src/imgui/imgui.cpp	2404	// Step 3: the clipper validate that we have reached the expected Y position (corresponding to element DisplayEnd),	COMMENT
LOW	tests/catch2/src/catch2/internal/catch_run_context.cpp	111	// No children have started. We need to check if they	COMMENT
LOW	tests/catch2/extras/catch_amalgamated.cpp	5796	// No children have started. We need to check if they	COMMENT
LOW	src/libslic3r/MultiNozzleUtils.cpp	543	// Step 0: compute the slicer-estimated time	COMMENT
LOW	src/libslic3r/MultiNozzleUtils.cpp	562	// Step 1: find the filament A currently loaded in the target extruder E	COMMENT
LOW	src/libslic3r/MultiNozzleUtils.cpp	573	// Step 2: clear B's AMS-channel occupancy	COMMENT
LOW	src/libslic3r/MultiNozzleUtils.cpp	593	// Step 3: A exits E (while A is still in the extruder)	COMMENT
LOW⚡	src/libslic3r/MultiNozzleUtils.cpp	624	// Step 4: push B into E	COMMENT
LOW⚡	src/libslic3r/MultiNozzleUtils.cpp	625	// Step 6: pre-load the next filament C (in parallel with Step 4)	COMMENT
LOW⚡	src/libslic3r/MultiNozzleUtils.cpp	635	// Step 5: update state	COMMENT
LOW⚡	src/libslic3r/PrintObject.cpp	2271	// Step 3: Early termination of loop if no meaningfull bridge found	COMMENT
LOW⚡	src/libslic3r/PrintObject.cpp	2276	// Step 4: Bottom bridge polygons found - scan and create layer+1 bridge polygon	COMMENT
LOW	src/libslic3r/SLA/SupportTreeBuildsteps.cpp	1059	// We need to check if there is an easy way out to the bed surface.	COMMENT
LOW	src/libslic3r/Geometry/VoronoiUtilsCgal.cpp	293	// So we need to check if test_pt isn't between them.	COMMENT
LOW	src/libslic3r/Geometry/VoronoiUtilsCgal.cpp	300	// So we need to check if test_pt is between them.	COMMENT
LOW	src/libslic3r/TextureToColor/TextureToColor.cpp	868	// Step 1: Oversampling (subdivision while propagating UVs)	COMMENT
LOW	src/libslic3r/TextureToColor/TextureToColor.cpp	922	// Step 2: Compute each face's color (7-point Gaussian quadrature + bilinear interpolation sampling)	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1185	// Step 1: Data preprocessing - normalize to [0, 1]	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1194	// Step 2: Compute mean and center the data	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1198	// Step 3: Compute covariance matrix (3x3)	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1201	// Step 4: Eigenvalue decomposition	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1224	// Step 5: Find the eigenvector corresponding to the largest eigenvalue (first principal component)	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1230	// Step 6: Project centered data onto the first principal component	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1233	// Step 7: Build result and sort	COMMENT
LOW	src/libslic3r/TextureToColor/ColorUtils.cpp	1486	// Step 1: Identify faces that definitely belong to a cluster center.	COMMENT
LOW	src/libslic3r/TextureToColor/ColorUtils.cpp	1530	// Step 2: Flood. Use faces computed in the previous step as seeds and propagate outward.	COMMENT
LOW	src/libslic3r/TextureToColor/ColorUtils.cpp	1584	// Step 3: Handle remaining unclustered faces (run after the above operations complete)	COMMENT
LOW	src/slic3r/GUI/DeviceCore/DevMapping.cpp	125	// Step 1: collect filaments in machine	COMMENT
LOW	src/slic3r/GUI/DeviceCore/DevMapping.cpp	219	// Step 2: collect the distances of filaments_in_slicing to filaments_in_machine	COMMENT
LOW	src/slic3r/GUI/DeviceCore/DevMapping.cpp	265	// Step 3: do mapping algorithm	COMMENT

Structural Annotation Overuse30 hits · 54 pts

Severity	File	Line	Snippet	Context
LOW	…rc/libnest2d/include/libnest2d/geometry_traits_nfp.hpp	405	// Step 1: Make the orbiter reverse oriented	COMMENT
LOW	…rc/libnest2d/include/libnest2d/geometry_traits_nfp.hpp	496	// Step 2: Fill the edgelists	COMMENT
LOW	deps_src/imgui/imgui.cpp	2332	// Step 0: Let you process the first element (regardless of it being visible or not, so we can measure the element h	COMMENT
LOW	deps_src/imgui/imgui.cpp	2360	// Step 1: the clipper infer height from first element	COMMENT
LOW	deps_src/imgui/imgui.cpp	2386	// Step 2: calculate the actual range of elements to display, and position the cursor before the first element	COMMENT
LOW	deps_src/imgui/imgui.cpp	2404	// Step 3: the clipper validate that we have reached the expected Y position (corresponding to element DisplayEnd),	COMMENT
LOW	src/libslic3r/MultiNozzleUtils.cpp	543	// Step 0: compute the slicer-estimated time	COMMENT
LOW	src/libslic3r/MultiNozzleUtils.cpp	562	// Step 1: find the filament A currently loaded in the target extruder E	COMMENT
LOW	src/libslic3r/MultiNozzleUtils.cpp	573	// Step 2: clear B's AMS-channel occupancy	COMMENT
LOW	src/libslic3r/MultiNozzleUtils.cpp	593	// Step 3: A exits E (while A is still in the extruder)	COMMENT
LOW⚡	src/libslic3r/MultiNozzleUtils.cpp	624	// Step 4: push B into E	COMMENT
LOW⚡	src/libslic3r/MultiNozzleUtils.cpp	625	// Step 6: pre-load the next filament C (in parallel with Step 4)	COMMENT
LOW⚡	src/libslic3r/MultiNozzleUtils.cpp	635	// Step 5: update state	COMMENT
LOW⚡	src/libslic3r/PrintObject.cpp	2271	// Step 3: Early termination of loop if no meaningfull bridge found	COMMENT
LOW⚡	src/libslic3r/PrintObject.cpp	2276	// Step 4: Bottom bridge polygons found - scan and create layer+1 bridge polygon	COMMENT
LOW	src/libslic3r/TextureToColor/TextureToColor.cpp	868	// Step 1: Oversampling (subdivision while propagating UVs)	COMMENT
LOW	src/libslic3r/TextureToColor/TextureToColor.cpp	922	// Step 2: Compute each face's color (7-point Gaussian quadrature + bilinear interpolation sampling)	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1185	// Step 1: Data preprocessing - normalize to [0, 1]	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1194	// Step 2: Compute mean and center the data	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1198	// Step 3: Compute covariance matrix (3x3)	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1201	// Step 4: Eigenvalue decomposition	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1224	// Step 5: Find the eigenvector corresponding to the largest eigenvalue (first principal component)	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1230	// Step 6: Project centered data onto the first principal component	COMMENT
LOW⚡	src/libslic3r/TextureToColor/ColorUtils.cpp	1233	// Step 7: Build result and sort	COMMENT
LOW	src/libslic3r/TextureToColor/ColorUtils.cpp	1486	// Step 1: Identify faces that definitely belong to a cluster center.	COMMENT
LOW	src/libslic3r/TextureToColor/ColorUtils.cpp	1530	// Step 2: Flood. Use faces computed in the previous step as seeds and propagate outward.	COMMENT
LOW	src/libslic3r/TextureToColor/ColorUtils.cpp	1584	// Step 3: Handle remaining unclustered faces (run after the above operations complete)	COMMENT
LOW	src/slic3r/GUI/DeviceCore/DevMapping.cpp	125	// Step 1: collect filaments in machine	COMMENT
LOW	src/slic3r/GUI/DeviceCore/DevMapping.cpp	219	// Step 2: collect the distances of filaments_in_slicing to filaments_in_machine	COMMENT
LOW	src/slic3r/GUI/DeviceCore/DevMapping.cpp	265	// Step 3: do mapping algorithm	COMMENT

Deep Nesting51 hits · 40 pts

Severity	File	Line	Context
LOW	sandboxes/orca_fuzzy_slices_plugin_any.py	112	CODE
LOW	sandboxes/orca_reload_local_bundle_demo.py	368	CODE
LOW	sandboxes/orca_inspector_plugin_any.py	1377	CODE
LOW	sandboxes/orca_inspector_plugin_any.py	1435	CODE
LOW	sandboxes/orca_inset_plugin_any.py	51	CODE
LOW	sandboxes/orca_twistify_plugin_any.py	555	CODE
LOW	resources/profiles/check_unused_setting_id.py	18	CODE
LOW	tests/compare_analyzer/compare_slices.py	131	CODE
LOW	tests/compare_analyzer/compare_slices.py	379	CODE
LOW	tests/compare_analyzer/compare_slices.py	511	CODE
LOW	tests/compare_analyzer/compare_slices.py	567	CODE
LOW	tests/compare_analyzer/compare_slices.py	752	CODE
LOW	tests/compare_analyzer/compare_slices.py	888	CODE
LOW	tests/compare_analyzer/show_temp_plot.py	68	CODE
LOW	tests/compare_analyzer/show_temp_plot.py	107	CODE
LOW	tests/compare_analyzer/show_temp_plot.py	329	CODE
LOW	.claude/skills/orca-profiles/scripts/shared_settings.py	110	CODE
LOW	.claude/skills/orca-profiles/scripts/shared_settings.py	135	CODE
LOW	.claude/skills/orca-translations/scripts/po_tool.py	472	CODE
LOW	.claude/skills/orca-translations/scripts/po_tool.py	740	CODE
LOW	.claude/skills/orca-translations/scripts/po_tool.py	865	CODE
LOW	.claude/skills/orca-translations/scripts/po_tool.py	925	CODE
LOW	.claude/skills/orca-translations/scripts/po_tool.py	77	CODE
LOW	…/skills/orca-translations/scripts/find_untranslated.py	22	CODE
LOW	…/skills/orca-translations/scripts/find_untranslated.py	42	CODE
LOW	scripts/test_moonraker_lane_data.py	59	CODE
LOW	scripts/test_moonraker_lane_data.py	377	CODE
LOW	scripts/orca_profile_tool.py	451	CODE
LOW	scripts/orca_profile_tool.py	681	CODE
LOW	scripts/orca_profile_tool.py	864	CODE
LOW	scripts/orca_profile_tool.py	1257	CODE
LOW	scripts/orca_profile_tool.py	1431	CODE
LOW	scripts/orca_profile_tool.py	1709	CODE
LOW	scripts/orca_profile_tool.py	1774	CODE
LOW	scripts/orca_profile_tool.py	2356	CODE
LOW	scripts/orca_profile_tool.py	2629	CODE
LOW	scripts/orca_profile_tool.py	2683	CODE
LOW	scripts/orca_profile_tool.py	2845	CODE
LOW	scripts/orca_profile_tool.py	2984	CODE
LOW	scripts/clang_tidy_diff.py	257	CODE
LOW	scripts/optimize_cover_images.py	162	CODE
LOW	scripts/optimize_cover_images.py	368	CODE
LOW	scripts/optimize_cover_images.py	441	CODE
LOW	scripts/gen_texture_displacement_tips.py	367	CODE
LOW	scripts/gen_texture_displacement_tips.py	559	CODE
LOW	scripts/tests/test_profile_tool.py	963	CODE
LOW	scripts/CAD/check-gui-context-menu.py	189	CODE
LOW	scripts/CAD/check-sketch-engine-corpus.py	97	CODE
LOW	scripts/CAD/check-sketch-engine-corpus.py	151	CODE
LOW	scripts/CAD/check-sketch-engine-corpus.py	234	CODE
LOW	scripts/CAD/check-sketch-engine-corpus.py	406	CODE

Modern AI Meta-Vocabulary7 hits · 20 pts

Severity	File	Line	Snippet	Context
MEDIUM	deps_src/libigl/igl/triangle/scaf.h	23	/// For a complete implementation and customized UI, please refer to https://github.com/jiangzhongshi/scaffold-map	COMMENT
MEDIUM	deps_src/libigl/igl/triangle/scaf.h	32	/// scaffold + isometric	COMMENT
MEDIUM	deps_src/libigl/igl/triangle/scaf.h	47	/// scaffold domain tets: scaffold tets	COMMENT
MEDIUM	deps_src/libigl/igl/triangle/scaf.h	53	/// scaffold area or volume	COMMENT
MEDIUM	deps_src/libigl/igl/triangle/scaf.h	122	/// @param[in] whole: Include scaffold if true	COMMENT
MEDIUM	deps_src/libigl/igl/triangle/scaf.cpp	535	// x_e as the fixed frame, x_u for unknowns (mesh + unknown scaffold)	COMMENT
MEDIUM	scripts/CAD/check-gui-sketching.py	329	key("ctrl+z", 0.5) # the probes are scaffolding, not geometry	CODE

Hallucination Indicators2 hits · 20 pts

Severity	File	Line	Snippet	Context
CRITICAL	resources/web/include/jquery-3.6.0.min.js	2	!function(e,t){"use strict";"object"==typeof module&&"object"==typeof module.exports?module.exports=e.document?t(e,!0):f	CODE
CRITICAL	resources/web/include/xterm/xterm.js	7	!function(e,t){if("object"==typeof exports&&"object"==typeof module)module.exports=t();else if("function"==typeof define	CODE

Redundant / Tautological Comments10 hits · 15 pts

Severity	File	Line	Snippet	Context
LOW	build_linux.sh	481	# Check if distribution is Debian/Ubuntu-like based on ID_LIKE	COMMENT
LOW	build_flatpak.sh	156	# Check if flatpak is installed	COMMENT
LOW	build_flatpak.sh	165	# Check if flatpak-builder is installed	COMMENT
LOW	build_flatpak.sh	206	# Check if required runtime is available	COMMENT
LOW	build_flatpak.sh	257	# Check if flatpak manifest exists	COMMENT
LOW	scripts/optimize_cover_images.py	243	# Check if adjustment is needed (allow 5% tolerance)	COMMENT
LOW	scripts/optimize_cover_images.py	525	# Check if vendor path exists	COMMENT
LOW	scripts/pack_profiles.sh	3	# Check if required arguments are provided	COMMENT
LOW	scripts/pack_profiles.sh	22	# Check if resources directory exists	COMMENT
LOW	scripts/pack_profiles.sh	74	# Print results	COMMENT

Cross-File Repetition3 hits · 15 pts

Severity	File	Snippet	Context
HIGH	scripts/tests/test_ci_macos_admission.py	tests for the setting_id half of scripts/orca_profile_tool.py (stdlib unittest, no external deps). run from the repo roo	STRING
HIGH	scripts/tests/test_filament_id.py	tests for the setting_id half of scripts/orca_profile_tool.py (stdlib unittest, no external deps). run from the repo roo	STRING
HIGH	scripts/tests/test_setting_id.py	tests for the setting_id half of scripts/orca_profile_tool.py (stdlib unittest, no external deps). run from the repo roo	STRING

Synthetic Comment Markers2 hits · 12 pts

Severity	File	Line	Snippet	Context
HIGH	deps_src/pybind11/include/pybind11/detail/class.h	635	// Fill in all the information, and then downgrade as requested by the caller, or raise an	COMMENT
HIGH	deps_src/imgui/imgui_draw.cpp	2300	const ImWchar* SrcRanges; // Ranges as requested by user (user is allowed to request too much, e.g. 0x	CODE

Fake / Example Data10 hits · 12 pts

Severity	File	Line	Snippet	Context
LOW⚡	deps_src/imgui/imgui_demo.cpp	5186	ImGui::TextWrapped("Lorem ipsum dolor sit amet");	CODE
LOW⚡	deps_src/imgui/imgui_demo.cpp	5186	ImGui::TextWrapped("Lorem ipsum dolor sit amet");	CODE
LOW⚡	deps_src/imgui/imgui_demo.cpp	5188	ImGui::Text("Lorem ipsum dolor sit amet");	CODE
LOW⚡	deps_src/imgui/imgui_demo.cpp	5188	ImGui::Text("Lorem ipsum dolor sit amet");	CODE
LOW	deps_src/imgui/imgui_demo.cpp	6839	ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor i	CODE
LOW	deps_src/imgui/imgui_demo.cpp	6839	ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor i	CODE
LOW	deps_src/imgui/imgui_demo.cpp	7473	ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut	CODE
LOW	deps_src/imgui/imgui_demo.cpp	7473	ImGui::TextWrapped("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut	CODE
LOW	resources/web/include/i18n.js	50	["title", "placeholder", "aria-label"].forEach((attr) => {	CODE
LOW	resources/web/dialog/ColorPickerDialog/colorpicker.js	7	for (const attribute of ["aria-label", "title", "placeholder"])	CODE

AI Response Leakage1 hit · 8 pts

Severity	File	Line	Snippet	Context
HIGH	deps_src/libigl/igl/raytri.c	11	// Alec: I've added an include guard, made all functions inline and added	COMMENT

Example Usage Blocks4 hits · 6 pts

Severity	File	Line	Snippet	Context
LOW	deps_src/libigl/igl/signed_distance.h	262	/// #### Usage:	COMMENT
LOW	scripts/build_flatpak_with_docker.sh	6	# Usage:	COMMENT
LOW	scripts/CAD/build-gui.sh	11	# Usage:	COMMENT
LOW	scripts/CAD/run-kernel-tests.sh	9	# Usage:	COMMENT

Self-Referential Comments2 hits · 6 pts

Severity	File	Line	Snippet	Context
MEDIUM	scripts/run_unit_tests.sh	3	# This file is made to support the unit tests workflow.	COMMENT
MEDIUM	.github/workflows/build_orca.yml	329	# Create main OrcaSlicer DMG without the profile validator helper	COMMENT

Unused Imports5 hits · 4 pts

Severity	File	Line	Context
LOW	tools/orca_cad_mcp_bridge.py	14	CODE
LOW	scripts/test_moonraker_lane_data.py	18	CODE
LOW	scripts/generate_orca_python_stubs.py	10	CODE
LOW	scripts/tests/test_filament_id.py	11	CODE
LOW	scripts/CAD/check-gui-sketching.py	19	CODE

Slop Phrases2 hits · 4 pts

Severity	File	Line	Snippet	Context
MEDIUM	deps_src/imgui/imgui_widgets.cpp	6922	// Tip: pass a non-visible label (e.g. "##hello") then you can use the space to draw other text or image.	COMMENT
LOW	deps_src/imgui/imgui.cpp	565	- 2017/08/25 (1.52) - io.MousePos needs to be set to ImVec2(-FLT_MAX,-FLT_MAX) when mouse is unavailable/missing. Previ	CODE

TODO Padding2 hits · 3 pts

Severity	File	Line	Snippet	Context
LOW	…_src/libnest2d/include/libnest2d/placers/nfpplacer.hpp	647	// TODO: implement	COMMENT
LOW	deps_src/mcut/source/kernel.cpp	5911	// TODO: implement logic for is_xo	COMMENT

Overly Generic Function Names1 hit · 1 pts

Severity	File	Line	Snippet	Context
LOW	resources/web/include/viewer/viewer.js	642	function getData(element, name) {	CODE

OrcaSlicer/OrcaSlicer

Open-Source Code Quality, Security and Technical Debt Review