4.0

Adjusted Signal

4.0

Raw Pattern Score

100%

Time Factor

2026-11-01

Last Push

6.1K

Stars

C++

Language

2.9M

Lines of Code

5.1K

Files

9.8K

Pattern Hits

2026-10-31

Scan Date

0.09

HC Hit Rate

Risk Review · Payload v1

Use each vector to guide manual verification of the underlying findings.

Payload schema: 1.0.0 · Engine: 2.0.0 · Scoring: heuristic-density-v1 · Scan date: 2026-10-31.

Cognitive Ownership Risk 13.2/100 · LOW

Can maintainers explain intent, assumptions, and trade-offs? 8846 finding(s).

Hallucinated Dependency & Supply Chain Risk 2.5/100 · LOW

Are imports declared and package/API names verified? 343 finding(s).

Agent Over-Engineering Ratio 10.8/100 · LOW

Are wrappers, guards, and repeated structures necessary? 6293 finding(s).

PR Review Velocity Impact 20.3/100 · LOW

Which changes need focused human review? 9808 finding(s).

What These Metrics Mean

Adjusted Signal: Legacy pattern score normalized per 1,000 scanned lines and multiplied by the repository-level time factor. It is not an estimate of AI authorship.
Raw Pattern Score: Sum of severity- and context-weighted pattern findings before applying the time factor.
Time Factor: A coarse multiplier based on repository last-push metadata. It does not identify when individual code was written.
Pattern Hits: Count of configured pattern findings. Review each location and surrounding code before acting.
HC Hit Rate: High- and critical-severity findings per scanned file. Severity is a configured detector weight, not proof of a vulnerability or authorship.
Lines / Files: Scan coverage denominators used by the legacy normalized score.

Pattern-Signal History

This chart tracks the legacy adjusted pattern score across scan runs. Changes can reflect source changes, scan coverage, or detector/scoring versions; they do not measure AI adoption or prove that a team refactored code. Compare runs only when their scoring versions are compatible. The dashed line tracks the raw pattern-hit count.

Severity Breakdown

Groups findings by configured severity weight. Severity is not a confidence estimate, security rating, or proof that a package is missing. Verify imports against the project's manifests and inspect each finding in its local design context.

CRITICAL 0HIGH 467MEDIUM 512LOW 8829

Directory Score Breakdown

This horizontal bar chart shows where configured pattern scores accumulate across directories. Treat the bars as locations to inspect, not as evidence of authorship or code quality. Use the file-level findings to decide whether a directory needs a focused ownership, dependency, complexity, or review check.

Pattern Findings

The scanner identified 9808 distinct pattern matches across 20 syntactic categories. Each entry below represents a discrete location in the source code where the engine recorded a detector match to inspect in context. Expand any category row to inspect the individual file paths, line numbers, code snippets, and the lexical context (CODE, COMMENT, or STRING) in which each match was detected.

Reading the findings table: The Severity column indicates the configured finding weight (CRITICAL / HIGH / MEDIUM / LOW). The Context column identifies whether the match occurred inside executable code, an inline comment, or a string literal — legacy comment-context matches receive a ×1.5 score weight. The ⚡ bolt icon marks clustered matches: three or more patterns within a 10-line window, each receiving an additional ×1.5 density multiplier under the legacy scoring model.

Hyper-Verbose Identifiers5645 hits · 4748 pts

Severity	File	Line	Snippet	Context
LOW	ogr/ogrspatialreference.cpp	908	* The C function OSRDestroySpatialReference() does the same thing as this	COMMENT
LOW	ogr/ogrspatialreference.cpp	12495	* This method is the same as the C function EPSGTreatsAsNorthingEasting().	COMMENT
LOW	ogr/ogrspatialreference.cpp	12868	* This is the same as the C function OSRSetDataAxisToSRSAxisMapping().	COMMENT
LOW	ogr/ogrct.cpp	1008	* This is the same as the C function OCTNewCoordinateTransformation().	COMMENT
LOW	ogr/ogrct.cpp	1038	* This is the same as the C function OCTNewCoordinateTransformationEx().	COMMENT
LOW	ogr/ogrct.cpp	1133	* This is the same as the C++ function OGRCreateCoordinateTransformation(const	COMMENT
LOW	ogr/ogrct.cpp	1169	* This is the same as the C++ function OGRCreateCoordinateTransformation(const	COMMENT
LOW	ogr/ogr_fromepsg.cpp	108	* This method is the same as the C function OSRSetStatePlaneWithUnits().	COMMENT
LOW	ogr/ogrsf_frmts/dgn/dgnwrite.cpp	1915	* Generally speaking the function DGNCreateCellHeaderFromGroup() should	COMMENT
LOW	swig/python/osgeo/gdal_fsspec.py	227	def register_vsi_implementations():	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	312	def _build_layer_name_non_single_mode(	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	414	def _gpkg_get_estimated_final_size(	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	638	def get_normalized_field_names(ds, lyr):	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	908	def get_vector_file_in_update_no_exception(filename):	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1103	def add_gdal_warp_options_to_string(vrt_string, warp_options):	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1171	def add_alpha_band_to_string_vrt(vrt_string: str) -> str:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1228	def update_alpha_value_for_non_alpha_inputs(	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1661	def group_overview_base_tiles(	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3708	function fromMercatorPixelToLatLng(pixel, zoom)	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	208	def _check_gpkg_spatial_ref_sys(self, c):	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	494	def _check_user_table_content(self, c, table_name, cols):	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	1198	def _check_attribute_user_table(self, c, table_name):	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	1624	def _check_tiled_gridded_coverage_data(self, c):	CODE
LOW	…n/gdal-utils/osgeo_utils/samples/build_jp2_from_xml.py	84	def write_hexstring_as_binary(hex_binary_content, out_f):	CODE
LOW	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	356	def _check_data_with_high_level_ogr_api(self, lyr, columns):	CODE
LOW	…ig/python/gdal-utils/osgeo_utils/auxiliary/osr_util.py	68	def get_axis_order_from_gis_order(gis_order: Optional[bool]):	CODE
LOW	…ig/python/gdal-utils/osgeo_utils/auxiliary/osr_util.py	80	def get_gis_order_from_axis_order(axis_order: Optional[OAMS_AXIS_ORDER]):	CODE
LOW	…thon/gdal-utils/osgeo_utils/auxiliary/color_palette.py	69	def replace_absolute_values_with_percent(self, ndv=True):	CODE
LOW	…thon/gdal-utils/osgeo_utils/auxiliary/color_palette.py	136	def get_supported_extenstions() -> Sequence[str]:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/auxiliary/util.py	42	def enable_exceptions_wrapper(args, *kwargs):	CODE
LOW	swig/python/gdal-utils/osgeo_utils/auxiliary/util.py	140	def get_sizes_factors_resolutions(	CODE
LOW	swig/python/gdal-utils/osgeo_utils/auxiliary/util.py	169	def get_best_ovr_by_resolutions(requested_res: Real, resolutions: Sequence[Real]):	CODE
LOW	swig/python/gdal-utils/osgeo_utils/auxiliary/util.py	384	def get_image_structure_metadata(	CODE
LOW	swig/python/gdal-utils/osgeo_utils/auxiliary/util.py	392	def get_bigtiff_creation_option_value(big_tiff: OptionalBoolStr):	CODE
LOW	…python/gdal-utils/osgeo_utils/auxiliary/color_table.py	31	def get_color_table_from_raster(path_or_ds: PathOrDS) -> Optional[gdal.ColorTable]:	CODE
LOW	…python/gdal-utils/osgeo_utils/auxiliary/color_table.py	41	def color_table_from_color_palette(	CODE
LOW	…python/gdal-utils/osgeo_utils/auxiliary/color_table.py	119	def write_color_table_to_file(	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	160	def from_geotransform_and_size(cls, gt, size):	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	182	def from_geotransform_and_size_to_pix(cls, gt, size):	CODE
LOW	…ig/python/gdal-utils/osgeo_utils/auxiliary/progress.py	48	def get_py_term_progress_callback():	CODE
LOW	…python/gdal-utils/osgeo_utils/auxiliary/extent_util.py	88	def calc_geotransform_and_dimensions(	CODE
LOW	…on/gdal-utils/osgeo_utils/auxiliary/raster_creation.py	131	def copy_raster_and_add_overviews(	CODE
LOW	autotest/conftest.py	151	def _get_check_no_unintended_files():	CODE
LOW	autotest/conftest.py	160	def check_no_unintended_files_session(request):	CODE
LOW	autotest/conftest.py	180	def check_no_unintended_files_function(request):	CODE
LOW	autotest/conftest.py	208	def pytest_collection_modifyitems(config, items):	CODE
LOW	autotest/conftest.py	440	def test_with_benchmark_fixture(args, *kwargs):	CODE
LOW	autotest/benchmark/test_ogr_gpkg.py	56	def test_ogr_gpkg_spatial_index(source_file):	CODE
LOW	autotest/benchmark/test_gtiff.py	37	def test_gtiff_multithread_write(with_optim):	CODE
LOW	autotest/benchmark/test_gtiff.py	158	def test_gtiff_build_overviews(tmp_vsimem, source_ds_2048x2048_filename, ovr_alg):	CODE
LOW	autotest/gnm/gnm_test.py	30	def test_gnm_filenetwork_create():	CODE
LOW	autotest/gnm/gnm_test.py	64	def test_gnm_filenetwork_open():	CODE
LOW	autotest/gnm/gnm_test.py	172	def test_gnm_graph_connectedcomponents():	CODE
LOW	autotest/ogr/ogr_esrijson.py	72	def test_ogr_esrijson_read_point():	CODE
LOW	autotest/ogr/ogr_esrijson.py	155	def test_ogr_esrijson_read_linestring():	CODE
LOW	autotest/ogr/ogr_esrijson.py	201	def test_ogr_esrijson_read_polygon():	CODE
LOW	autotest/ogr/ogr_esrijson.py	240	def test_ogr_esrijson_read_multipoint():	CODE
LOW	autotest/ogr/ogr_esrijson.py	265	def test_ogr_esrijson_read_pointz():	CODE
LOW	autotest/ogr/ogr_esrijson.py	312	def test_ogr_esrijson_read_linestringz():	CODE
LOW	autotest/ogr/ogr_esrijson.py	338	def test_ogr_esrijson_read_multipointz():	CODE
5585 more matches not shown…

Over-Commented Block2511 hits · 2334 pts

Severity	File	Line	Snippet	Context
LOW	CMakeLists.txt	181	CACHE CMAKE_FIND_FRAMEWORK	COMMENT
LOW	.cmake-format.py	161	# Regular expression to match preformat fences in comments default=	COMMENT
LOW	gnm/gnm_priv.h	41	#define GNM_VERSION "1.0"	COMMENT
LOW	gnm/gnm_priv.h	61	#define GNM_SYSFIELD_GFID "gnm_fid"	COMMENT
LOW	gnm/gnm_priv.h	81	// Other string constants.	COMMENT
LOW	gnm/gnm.h	41	// network data.	COMMENT
LOW	gnm/gnmgraph.cpp	301	aoRootPath.assign(A[k].begin(), itAk);	COMMENT
LOW	gnm/gnmgraph.cpp	401		COMMENT
LOW	gnm/gnm_frmts/gnmregisterall.cpp	41	#endif	COMMENT
LOW	ogr/ogr_recordbatch.h	1	// Licensed to the Apache Software Foundation (ASF) under one	COMMENT
LOW	ogr/ogr_recordbatch.h	81	#define ARROW_C_STREAM_INTERFACE	COMMENT
LOW	ogr/ogr_recordbatch.h	101	// Callback to get optional detailed error information.	COMMENT
LOW	ogr/ogr_xerces_headers.h	21	#include <xercesc/framework/MemoryManager.hpp>	COMMENT
LOW	ogr/ogr_geocoding.cpp	21	#include "cpl_error.h"	COMMENT
LOW	ogr/swq.cpp	21		COMMENT
LOW	ogr/ogrmitabspatialref.cpp	1	// SPDX-License-Identifier: MIT	COMMENT
LOW	ogr/gml2ogrgeometry.cpp	21	* compromising the system.	COMMENT
LOW	ogr/gml2ogrgeometry.cpp	3321	// if( poFaceGeom == NULL )	COMMENT
LOW	ogr/ogr2gmlgeometry.cpp	21	* come from a potentially hostile source, but through a trusted OGR importer	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	821	// Multiple mappings to LAT_PROJ_ORIGIN	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	841	// * false_northing	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	861	// * false_easting	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	881	// * false_northing	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	941	//	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	961	//	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	1001	// grid_mapping_name = orthographic	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	1021	// WKT: Polar_Stereographic	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	1041	// grid_mapping_name = rotated_latitude_longitude	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	1061	// * scale_factor_at_projection_origin	COMMENT
LOW	ogr/ogr_srs_cf1.cpp	1081	//	COMMENT
LOW	ogr/swq_expr_node.cpp	21	#include <cctype>	COMMENT
LOW	ogr/ogr_srs_esri.cpp	21	#include <cstddef>	COMMENT
LOW	ogr/ogr_srs_esri.cpp	421	// https://webhelp.esri.com/arcgisdesktop/9.3/index.cfm?TopicName=Lambert_Azimuthal_Equal_Area	COMMENT
LOW	ogr/ogrspatialreference.cpp	21	#include <cstring>	COMMENT
LOW	ogr/ogrspatialreference.cpp	41	#include "ogr_srs_api.h"	COMMENT
LOW	ogr/ogrfeaturestyle.cpp	1781		COMMENT
LOW	ogr/ogr_srs_cf1.h	21	/* mapping & projection - see http://cf-pcmdi.llnl.gov/ */	COMMENT
LOW	ogr/ogr_srs_cf1.h	41	#define CF_PT_MERCATOR "mercator"	COMMENT
LOW	ogr/ogr_srs_cf1.h	61	/* scale_factor is not CF, there are two possible translations */	COMMENT
LOW	ogr/ogr_srs_isis.cpp	281	// ObliqueCylindrical	COMMENT
LOW	ogr/ogr_srs_isis.cpp	381	GetISISMappingDouble(oMapping, "PoleLongitude") *	COMMENT
LOW	ogr/ogrgeojsonwriter.cpp	21	#include "ogrlibjsonutils.h"	COMMENT
LOW	ogr/ogr_swq.h	21	#ifndef SWQ_H_INCLUDED_	COMMENT
LOW	ogr/ogrutils.cpp	21	#include <cstddef>	COMMENT
LOW	ogr/ogrct.cpp	21	#include <limits>	COMMENT
LOW	ogr/swq_op_general.cpp	21	#include <climits>	COMMENT
LOW	ogr/swq_parser.cpp	121	# endif	COMMENT
LOW	ogr/swq_parser.cpp	281	typedef unsigned char yytype_uint8;	COMMENT
LOW	ogr/swq_parser.cpp	301	# elif defined PTRDIFF_MAX	COMMENT
LOW	ogr/swq_parser.cpp	341	#ifndef YY_	COMMENT
LOW	ogr/swq_parser.cpp	361		COMMENT
LOW	ogr/swq_parser.cpp	381	_Pragma ("GCC diagnostic push") \	COMMENT
LOW	ogr/swq_parser.cpp	421	# ifdef YYSTACK_USE_ALLOCA	COMMENT
LOW	ogr/swq_parser.cpp	441	# endif	COMMENT
LOW	ogr/swq_parser.cpp	461	# if (defined __cplusplus && ! defined EXIT_SUCCESS \	COMMENT
LOW	ogr/ogrgeometry.cpp	21	#include <cstdlib>	COMMENT
LOW	ogr/ogrgeometry.cpp	41	#include "ogr_srs_api.h"	COMMENT
LOW	ogr/ogr_libs.h	21	#ifndef HAVE_SFCGAL	COMMENT
LOW	ogr/ogr_libs.h	41	UNUSED_IF_NO_GEOS // SFCGAL yes and GEOS no - SFCGAL methods always work	COMMENT
LOW	ogr/ogr_srs_usgs.cpp	61	constexpr long WAGIV = 28L; // Wagner IV	COMMENT
2451 more matches not shown…

Cross-Language Confusion297 hits · 1395 pts

Severity	File	Line	Snippet	Context
HIGH	swig/python/gdal-utils/osgeo_utils/gdal_edit.py	373	"Dataset SRS is undefined, cannot set epoch. See the -a_srs option.",	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/gdal_edit.py	383	print("Dataset SRS is undefined, with no epoch specified.", file=sys.stderr)	CODE
HIGH⚡	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3181	(minX < maxX && (tileX >= minX && tileX <= maxX))	CODE
HIGH⚡	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3182	\|\| (minX > maxX && ((tileX >= minX && tileX <= (Math.pow(2, zoom) - 1)) \|\| (tileX >= 0 && tileX <= maxX)	CODE
HIGH⚡	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3184	&& (tileY >= minY && tileY <= maxY)	CODE
HIGH⚡	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3186	tilesToKeep.push(this.tiles[i]);	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3154	this.tiles.push(tile)	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3212	if (x < 0 \|\| x >= tileRange) {	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3266	tile = null;	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3487	currentX_ = currentY_ = null;	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3651	if (document.documentElement && document.documentElement.clientHeight)	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3659	if (document.documentElement && document.documentElement.clientWidth)	CODE
HIGH	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	280	f"For column {column_name}, GeoParquet CRS is null, but parquet_crs = '{parquet_crs}' (diffe	CODE
HIGH	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	293	f"For column {column_name}, GeoParquet CRS is not null, but parquet_crs = '{parquet_crs}' an	CODE
HIGH	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	302	f"For column {column_name}, GeoParquet CRS is null, but parquet_crs = '{parquet_crs}'"	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/samples/ogrinfo.py	461	line = line + "(null)"	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/samples/gdalinfo.py	441	line = line + "(null)"	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/samples/gdalinfo.py	457	line = line + "(null)"	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/samples/gdalinfo.py	491	line = line + "(null)"	CODE
HIGH	autotest/ogr/ogr_esrijson.py	635	"geometry": null,	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	363	assert f["list_struct"] == """[{"a":1,"b":2.5,"c":null},{"a":3,"b":null,"c":4.5}]"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	364	assert f["map_boolean"] == '{"x":null,"y":true}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	365	assert f["map_uint8"] == '{"x":1,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	366	assert f["map_int8"] == '{"x":1,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	367	assert f["map_uint16"] == '{"x":1,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	368	assert f["map_int16"] == '{"x":1,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	369	assert f["map_uint32"] == '{"x":4000000000,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	370	assert f["map_int32"] == '{"x":2000000000,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	371	assert f["map_uint64"] == '{"x":4000000000000,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	372	assert f["map_int64"] == '{"x":-2000000000000,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	373	assert f["map_float32"] == '{"x":1.5,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	374	assert f["map_float64"] == '{"x":1.5,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	375	assert f["map_decimal128"] == '{"x":1234.567,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	376	assert f["map_decimal256"] == '{"x":1234.567,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	377	assert f["map_string"] == '{"x":"x_val","y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	378	assert f["map_large_string"] == '{"x":"x_val","y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	379	assert f["map_list_string"] == '{"x":["x_val"],"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	380	assert f["map_large_list_string"] == '{"x":["x_val"],"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	381	assert f["map_fixed_size_list_string"] == '{"x":["x_val",null],"y":[null,null]}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	387	assert f["map_float16"] == '{"x":1.5,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	397	assert f["list_list_float16"] == "[null]"	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	492	assert f["map_uint8"] == '{"x":1,"y":null}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	502	assert f["map_boolean"] == '{"x":null,"y":true}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	512	assert f["map_boolean"] == '{"x":null,"y":true}'	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3144	assert f["map_map_bool"] == """{"a":{"b":true,"c":null,"d":null},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3145	assert f["map_map_uint8"] == """{"a":{"b":1,"c":null,"d":2},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3146	assert f["map_map_int8"] == """{"a":{"b":1,"c":null,"d":2},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3147	assert f["map_map_uint16"] == """{"a":{"b":1,"c":null,"d":2},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3148	assert f["map_map_int16"] == """{"a":{"b":1,"c":null,"d":2},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3149	assert f["map_map_uint32"] == """{"a":{"b":1,"c":null,"d":2},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3150	assert f["map_map_int32"] == """{"a":{"b":1,"c":null,"d":2},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3151	assert f["map_map_uint64"] == """{"a":{"b":1,"c":null,"d":2},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3152	assert f["map_map_int64"] == """{"a":{"b":1,"c":null,"d":2},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3153	assert f["map_map_float32"] == """{"a":{"b":1.0,"c":null,"d":2.0},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3154	assert f["map_map_float64"] == """{"a":{"b":1.0,"c":null,"d":2.0},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3155	assert f["map_map_string"] == """{"a":{"b":"c","d":null},"e":null}"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3156	assert f["list_list_bool"] == """[[true],null,[false,null,true]]"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3157	assert f["list_list_uint8"] == """[[1],null,[2,null,3]]"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3158	assert f["list_list_int8"] == """[[1],null,[-2,null,3]]"""	CODE
HIGH⚡	autotest/ogr/ogr_parquet.py	3159	assert f["list_list_uint16"] == """[[1],null,[2,null,3]]"""	CODE
237 more matches not shown…

Decorative Section Separators228 hits · 733 pts

Severity	File	Line	Snippet	Context
MEDIUM	.cmake-format.py	1	# ----------------------------------	COMMENT
MEDIUM	.cmake-format.py	3	# ----------------------------------	COMMENT
MEDIUM	.cmake-format.py	59	# -----------------------------	COMMENT
MEDIUM	.cmake-format.py	61	# -----------------------------	COMMENT
MEDIUM	.cmake-format.py	141	# ------------------------------------------------	COMMENT
MEDIUM	.cmake-format.py	143	# ------------------------------------------------	COMMENT
MEDIUM	.cmake-format.py	185	# ----------------------------	COMMENT
MEDIUM	.cmake-format.py	187	# ----------------------------	COMMENT
MEDIUM	.cmake-format.py	238	# -------------------------------	COMMENT
MEDIUM	.cmake-format.py	240	# -------------------------------	COMMENT
MEDIUM	.cmake-format.py	253	# -------------------------------------	COMMENT
MEDIUM	.cmake-format.py	255	# -------------------------------------	COMMENT
MEDIUM⚡	swig/python/setup_fallback_mingw.py	53	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	swig/python/setup_fallback_mingw.py	55	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	swig/python/setup_fallback_mingw.py	61	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	swig/python/setup_fallback_mingw.py	64	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	swig/python/setup_fallback_mingw.py	79	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	swig/python/setup_fallback_mingw.py	81	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	swig/python/setup_fallback_mingw.py	91	# ---------------------------------------------------------------------------	COMMENT
MEDIUM⚡	swig/python/setup_fallback_mingw.py	93	# ---------------------------------------------------------------------------	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	160	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	162	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	173	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	175	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	187	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	189	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	209	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	211	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_merge.py	44	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_merge.py	123	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_merge.py	161	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_merge.py	196	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_merge.py	365	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_retile.py	944	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	56	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	58	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	85	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	87	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	125	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	127	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	137	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	139	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	180	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	182	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/pct2rgb.py	53	# ----------------------------------------------------------------------------	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/pct2rgb.py	63	# ----------------------------------------------------------------------------	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/pct2rgb.py	92	# ----------------------------------------------------------------------------	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/pct2rgb.py	106	# ----------------------------------------------------------------------------	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/pct2rgb.py	114	# ----------------------------------------------------------------------------	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/pct2rgb.py	129	# ----------------------------------------------------------------------------	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_sieve.py	124	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_sieve.py	126	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_sieve.py	136	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_sieve.py	138	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_sieve.py	159	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_sieve.py	161	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_sieve.py	185	# =============================================================================	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_sieve.py	187	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_fillnodata.py	54	# =============================================================================	COMMENT
MEDIUM⚡	swig/python/gdal-utils/osgeo_utils/gdal_fillnodata.py	56	# =============================================================================	COMMENT
168 more matches not shown…

Empty Error Handlers140 hits · 700 pts

Severity	File	Line	Snippet	Context
HIGH	swig/python/setup_fallback_mingw.py	161	except Exception:	CODE
HIGH	swig/python/setup_fallback_mingw.py	169	except Exception:	CODE
HIGH	swig/python/osgeo/gdal_fsspec.py	173	except Exception:	CODE
HIGH	swig/python/osgeo/gdal_fsspec.py	187	except Exception:	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/gdal_pansharpen.py	278	except ValueError:	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/gdal_calc.py	743	except argparse.ArgumentError:	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	429	except Exception:	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	1050	except AttributeError:	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	1133	except AttributeError:	CODE
HIGH	…/python/gdal-utils/osgeo_utils/samples/crs2crs2grid.py	379	except OSError:	CODE
HIGH	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	710	except Exception:	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/samples/ogr2vrt.py	317	except AttributeError: # if run with GDAL < 3.2	CODE
HIGH	…/gdal-utils/osgeo_utils/samples/gdal_remove_towgs84.py	63	except Exception:	CODE
HIGH	…g/python/gdal-utils/osgeo_utils/samples/mkgraticule.py	125	except Exception:	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/samples/load2odbc.py	93	except Exception:	CODE
HIGH	…/python/gdal-utils/osgeo_utils/samples/validate_jp2.py	1721	except OSError:	CODE
HIGH	swig/python/gdal-utils/osgeo_utils/samples/epsg_tr.py	108	except Exception:	CODE
HIGH	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	55	except OSError:	CODE
HIGH	…/python/gdal-utils/osgeo_utils/auxiliary/array_util.py	40	except ImportError:	CODE
HIGH	autotest/gnm/gnm_test.py	34	except OSError:	CODE
HIGH	autotest/ogr/ogr_basic_test.py	698	except Exception:	CODE
HIGH	autotest/ogr/ogr_basic_test.py	707	except Exception:	CODE
HIGH	autotest/ogr/ogr_fgdb.py	467	except OSError:	CODE
HIGH	autotest/ogr/ogr_openfilegdb.py	192	except OSError:	CODE
HIGH	autotest/ogr/ogr_openfilegdb.py	2032	except OSError:	CODE
HIGH	autotest/ogr/ogr_geom.py	770	except Exception:	CODE
HIGH	autotest/ogr/ogr_geom.py	784	except Exception:	CODE
HIGH	autotest/ogr/ogr_gpkg.py	7134	except Exception:	CODE
HIGH	autotest/ogr/ogr_shape.py	2885	except OSError:	CODE
HIGH	autotest/ogr/ogr_mvt.py	1007	except Exception:	CODE
HIGH	autotest/ogr/ogr_nas.py	63	except OSError:	CODE
HIGH	autotest/ogr/ogr_nas.py	126	except OSError:	CODE
HIGH	autotest/ogr/ogr_openfilegdb_write.py	4487	except ValueError:	CODE
HIGH	autotest/ogr/ogr_openfilegdb_write.py	4544	except ValueError:	CODE
HIGH	autotest/ogr/ogr_gmlas.py	979	except IOError:	CODE
HIGH	autotest/ogr/ogr_ngw.py	258	except Exception:	CODE
HIGH	autotest/ogr/ogr_ngw.py	329	except Exception:	CODE
HIGH	autotest/ogr/ogr_ngw.py	340	except Exception:	CODE
HIGH	autotest/ogr/ogr_ngw.py	479	except Exception:	CODE
HIGH	autotest/ogr/ogr_wfs.py	488	except IOError:	CODE
HIGH	autotest/ogr/ogr_adbc.py	56	except Exception:	CODE
HIGH	autotest/ogr/ogr_osm.py	421	except (OSError, AttributeError):	CODE
HIGH	autotest/ogr/ogr_georss.py	43	except Exception:	CODE
HIGH	autotest/ogr/ogr_georss.py	249	except OSError:	CODE
HIGH	autotest/ogr/ogr_oci.py	58	except Exception:	CODE
HIGH	autotest/ogr/ogr_vrt.py	298	except OSError:	CODE
HIGH	autotest/ogr/ogr_vrt.py	2947	except OSError:	CODE
HIGH	autotest/ogr/ogr_vrt.py	2985	except OSError:	CODE
HIGH	autotest/ogr/ogr_vrt.py	3043	except OSError:	CODE
HIGH	autotest/ogr/ogr_pg.py	535	except Exception:	CODE
HIGH	autotest/ogr/ogr_pg.py	1851	except Exception:	CODE
HIGH	autotest/ogr/ogr_pg.py	1862	except Exception:	CODE
HIGH	autotest/ogr/ogr_sql_sqlite.py	1328	except IOError:	CODE
HIGH	autotest/ogr/ogr_gml.py	1448	except OSError:	CODE
HIGH	autotest/ogr/ogr_flatgeobuf.py	497	except IOError:	CODE
HIGH	autotest/pymod/test_py_scripts.py	47	except OSError:	CODE
HIGH	autotest/pymod/webserver.py	519	except IOError:	CODE
HIGH	autotest/pymod/webserver.py	570	except Exception:	CODE
HIGH	autotest/pymod/webserver.py	208	except Exception:	CODE
HIGH	autotest/pymod/gdaltest.py	1763	except OSError:	CODE
80 more matches not shown…

Self-Referential Comments228 hits · 641 pts

Severity	File	Line	Snippet	Context
MEDIUM	ogr/ograpispy.cpp	205	"# This file is generated by the OGR_API_SPY mechanism.\n");	CODE
MEDIUM	docker/build-all.sh	2	# This file is available at the option of the licensee under:	COMMENT
MEDIUM	docker/util.sh	2	# This file is available at the option of the licensee under:	COMMENT
MEDIUM	docker/alpine-normal/build.sh	2	# This file is available at the option of the licensee under:	COMMENT
MEDIUM	docker/alpine-small/build.sh	2	# This file is available at the option of the licensee under:	COMMENT
MEDIUM	docker/ubuntu-full/build.sh	2	# This file is available at the option of the licensee under:	COMMENT
MEDIUM	docker/ubuntu-small/build.sh	2	# This file is available at the option of the licensee under:	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/pct2rgb.py	93	# Create the working file.	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/rgb2pct.py	73	# Create the working file. We have to use TIFF since there are few formats	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1408	# Create a KML file for this tile.	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1635	# Create a KML file for this tile.	COMMENT
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdalattachpct.py	129	# Create a MEM clone of the source file.	COMMENT
MEDIUM	…ig/python/gdal-utils/osgeo_utils/samples/get_soundg.py	43	# Create the output shapefile.	COMMENT
MEDIUM⚡	…ig/python/gdal-utils/osgeo_utils/samples/gdalfilter.py	101	# Create a virtual file in memory only which matches the configuration of	COMMENT
MEDIUM	swig/java/make_doc.sh	24	# Create a zip with the Javadoc	COMMENT
MEDIUM	autotest/ogr/ogr_mysql.py	625	# Create a layer with a single feature through SQL	COMMENT
MEDIUM⚡	autotest/ogr/ogr_mssqlspatial.py	284	# Create a feature that specifies a spatial-reference system	COMMENT
MEDIUM⚡	autotest/ogr/ogr_mssqlspatial.py	293	# Create a table that includes a geometry column but is not registered in	COMMENT
MEDIUM⚡	autotest/ogr/ogr_mssqlspatial.py	303	# Create a new MSSQLSpatial data source, one that will find the table just	COMMENT
MEDIUM	autotest/ogr/ogr_mongodbv3.py	474	# Create a feature only from its _json content and do not store any ogr metadata related to the layer	COMMENT
MEDIUM	autotest/ogr/ogr_mongodbv3.py	864	# Create a layer	COMMENT
MEDIUM	autotest/ogr/ogr_mongodbv3.py	877	# Create a feature with some data	COMMENT
MEDIUM	autotest/ogr/ogr_mongodbv3.py	916	# Create a layer	COMMENT
MEDIUM	autotest/ogr/ogr_mongodbv3.py	929	# Create a feature with some data	COMMENT
MEDIUM	autotest/ogr/ogr_gpkg.py	294	# Create a fresh database.	COMMENT
MEDIUM	autotest/ogr/ogr_gpkg.py	319	# Create a layer	COMMENT
MEDIUM	autotest/ogr/ogr_gpkg.py	10040	# Create a feature without geometry	COMMENT
MEDIUM	autotest/ogr/ogr_gpkg.py	10099	# Create a feature with a geometry	COMMENT
MEDIUM	autotest/ogr/ogr_gpkg.py	10111	# Create a feature with a empty geometry	COMMENT
MEDIUM	autotest/ogr/ogr_gpkg.py	11655	# Create a UNIQUE constraint on int_field	COMMENT
MEDIUM	autotest/ogr/ogr_sqlite.py	88	# Create a fresh database.	COMMENT
MEDIUM	autotest/ogr/ogr_sqlite.py	950	# Create a layer with a non EPSG SRS into a SPATIALITE DB (#3506)	COMMENT
MEDIUM	autotest/ogr/ogr_sqlite.py	984	# Create a SpatiaLite DB with INIT_WITH_EPSG=YES	COMMENT
MEDIUM	autotest/ogr/ogr_sqlite.py	1015	# Create a SpatiaLite DB with INIT_WITH_EPSG=NO	COMMENT
MEDIUM	autotest/ogr/ogr_sqlite.py	1045	# Create a regular DB with INIT_WITH_EPSG=YES	COMMENT
MEDIUM	autotest/ogr/ogr_dxf.py	2851	# Create a blocks layer only	COMMENT
MEDIUM	autotest/ogr/ogr_elasticsearch.py	3418	# Create a layer that will not bulk upsert.	COMMENT
MEDIUM	autotest/ogr/ogr_elasticsearch.py	3444	# Create a layer that will bulk upsert.	COMMENT
MEDIUM	autotest/ogr/ogr_feature.py	21	# Create a destination feature type with one field for each field in the source	COMMENT
MEDIUM	autotest/ogr/ogr_feature.py	39	# Create a source feature	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	608	# Create a feature	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	642	# Create a layer	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	684	# Create a layer	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	1311	# Create a layer	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	2104	# Create a field	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	4811	# Create a shape	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	4845	# Create a shape	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	4896	# Create a shape	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	4915	# Create a shape	COMMENT
MEDIUM	autotest/ogr/ogr_shape.py	5644	# Create a shape	COMMENT
MEDIUM⚡	autotest/ogr/ogr_mem.py	1416	# Create a memory layer	COMMENT
MEDIUM⚡	autotest/ogr/ogr_mem.py	1422	# Create a feature with some data	COMMENT
MEDIUM⚡	autotest/ogr/ogr_mem.py	1454	# Create a memory layer	COMMENT
MEDIUM⚡	autotest/ogr/ogr_mem.py	1460	# Create a feature with some data	COMMENT
MEDIUM	autotest/ogr/ogr_mem.py	531	# Create a field so as to test OGRMemLayerIteratorMap	COMMENT
MEDIUM	autotest/ogr/ogr_csv.py	898	# Create an invalid CSV file	STRING
MEDIUM	autotest/ogr/ogr_vdv.py	139	# Create a VDV file	COMMENT
MEDIUM	autotest/ogr/ogr_as_sqlite_extension.py	15	# This file is meant at being run by ogr_virtualogr_3()	COMMENT
MEDIUM	autotest/ogr/ogr_hana.py	1250	# Create a table from data/poly.shp	COMMENT
MEDIUM	autotest/ogr/ogr_virtualogr.py	332	# Create a CSV with duplicate column name	COMMENT
168 more matches not shown…

Deep Nesting338 hits · 288 pts

Severity	File	Line	Context
LOW	swig/python/trimmedsysconfig.py	33	CODE
LOW	swig/python/setup_fallback_mingw.py	234	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_pansharpen.py	55	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_pansharpen.py	148	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	41	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_merge.py	399	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_retile.py	314	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_retile.py	965	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	27	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogr_layer_algebra.py	51	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogr_layer_algebra.py	159	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_calc.py	98	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_calc.py	881	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2xyz.py	39	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2xyz.py	342	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_sieve.py	35	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdalmove.py	231	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_edit.py	74	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	159	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	312	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	414	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	500	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	841	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	919	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	838	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	935	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1033	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1278	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1466	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	2020	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	4411	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	4619	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	2239	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	2676	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	2801	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3012	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	3995	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdalcompare.py	31	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdalcompare.py	402	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdalcompare.py	493	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdalattachpct.py	38	CODE
LOW	…l-utils/osgeo_utils/samples/tile_extent_from_raster.py	26	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/gcps2vec.py	25	CODE
LOW	…thon/gdal-utils/osgeo_utils/samples/gdal_create_pdf.py	24	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/tolatlong.py	35	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/gdal_rm.py	24	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/gdal_rm.py	59	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/dump_jp2.py	64	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/dump_jp2.py	92	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/dump_jp2.py	155	CODE
LOW	…gdal-utils/osgeo_utils/samples/jpeg_in_tiff_extract.py	160	CODE
LOW	…/python/gdal-utils/osgeo_utils/samples/crs2crs2grid.py	245	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	2994	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	494	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	662	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	1624	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	2702	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	2837	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/ogr2vrt.py	77	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_s102.py	2201	CODE
278 more matches not shown…

Excessive Try-Catch Wrapping221 hits · 240 pts

Severity	File	Line	Snippet	Context
LOW	swig/python/setup_fallback_mingw.py	161	except Exception:	CODE
LOW	swig/python/setup_fallback_mingw.py	169	except Exception:	CODE
LOW	swig/python/setup_fallback_mingw.py	185	except Exception:	CODE
LOW	swig/python/osgeo/gdal_fsspec.py	173	except Exception:	CODE
LOW	swig/python/osgeo/gdal_fsspec.py	187	except Exception:	CODE
LOW	swig/python/osgeo/gdal_fsspec.py	204	except Exception:	CODE
LOW	swig/python/osgeo/gdal_fsspec.py	221	except Exception:	CODE
LOW⚡	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	184	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_merge.py	553	except Exception:	CODE
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_retile.py	68	print("Error opening: %s" % NameError, file=sys.stderr)	CODE
MEDIUM	swig/python/gdal-utils/osgeo_utils/gdal_retile.py	1135	print("Error building tile index", file=sys.stderr)	CODE
LOW⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	93	except Exception:	CODE
LOW⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	96	except Exception:	CODE
LOW⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	116	except Exception:	CODE
LOW⚡	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	142	except Exception:	CODE
MEDIUM	swig/python/gdal-utils/osgeo_utils/ogr_layer_algebra.py	556	print("An error occurred during %s operation" % op_str, file=sys.stderr)	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_calc.py	624	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/pct2rgb.py	146	except Exception:	CODE
MEDIUM	swig/python/gdal-utils/osgeo_utils/pct2rgb.py	142	def doit(**kwargs):	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_edit.py	155	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_edit.py	331	except Exception as e:	CODE
MEDIUM	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	376	def _gpkg_get_src_table_size(src_ds, table_name):	CODE
LOW⚡	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	222	except Exception:	CODE
LOW⚡	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	230	except Exception:	CODE
LOW⚡	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	238	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	83	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	383	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	429	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/rgb2pct.py	138	except Exception:	CODE
MEDIUM	swig/python/gdal-utils/osgeo_utils/rgb2pct.py	134	def doit(**kwargs):	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	256	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	266	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	1990	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/tigerpoly.py	213	except Exception:	CODE
MEDIUM	…/python/gdal-utils/osgeo_utils/samples/crs2crs2grid.py	72	print("Error - did not find results for every point in the input grid.")	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	710	except Exception:	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	2905	except Exception:	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_s102.py	287	except Exception as e:	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_s102.py	429	except Exception:	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_s102.py	1991	except Exception:	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_s102.py	2035	except Exception:	CODE
MEDIUM	…python/gdal-utils/osgeo_utils/samples/validate_s102.py	283	def check(self):	CODE
LOW	…/gdal-utils/osgeo_utils/samples/gdal_remove_towgs84.py	63	except Exception:	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/gdal_lut.py	183	except Exception:	STRING
LOW	…g/python/gdal-utils/osgeo_utils/samples/mkgraticule.py	125	except Exception:	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_s104.py	297	except Exception as e:	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_s104.py	543	except Exception:	CODE
MEDIUM	…python/gdal-utils/osgeo_utils/samples/validate_s104.py	293	def check(self):	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/load2odbc.py	93	except Exception:	CODE
MEDIUM	swig/python/gdal-utils/osgeo_utils/samples/esri2wkt.py	41	print("Error = %d" % err)	CODE
LOW	…/python/gdal-utils/osgeo_utils/samples/assemblepoly.py	88	except Exception:	CODE
LOW	…/python/gdal-utils/osgeo_utils/samples/assemblepoly.py	100	except Exception:	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_s111.py	297	except Exception as e:	CODE
LOW	…python/gdal-utils/osgeo_utils/samples/validate_s111.py	556	except Exception:	CODE
MEDIUM	…python/gdal-utils/osgeo_utils/samples/validate_s111.py	293	def check(self):	CODE
LOW	swig/python/gdal-utils/osgeo_utils/samples/epsg_tr.py	108	except Exception:	CODE
LOW	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	157	except Exception as e:	CODE
LOW	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	167	except Exception as e:	CODE
LOW⚡	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	208	except Exception as e:	CODE
LOW⚡	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	215	except Exception as e:	CODE
161 more matches not shown…

Cross-File Repetition29 hits · 145 pts

Severity	File	Snippet	Context
HIGH	…python/gdal-utils/osgeo_utils/samples/validate_s102.py	check specified filename and return a tuple (errors, warnings, checks_done)	STRING
HIGH	…python/gdal-utils/osgeo_utils/samples/validate_s104.py	check specified filename and return a tuple (errors, warnings, checks_done)	STRING
HIGH	…python/gdal-utils/osgeo_utils/samples/validate_s111.py	check specified filename and return a tuple (errors, warnings, checks_done)	STRING
HIGH	autotest/ogr/data/testograpispy.py	geogcs["wgs 84",datum["wgs_1984",spheroid["wgs 84",6378137,298.257223563,authority["epsg","7030"]],authority["epsg","632	STRING
HIGH	autotest/utilities/test_gdalsrsinfo.py	geogcs["wgs 84",datum["wgs_1984",spheroid["wgs 84",6378137,298.257223563,authority["epsg","7030"]],authority["epsg","632	STRING
HIGH	autotest/osr/osr_cf1.py	geogcs["wgs 84",datum["wgs_1984",spheroid["wgs 84",6378137,298.257223563,authority["epsg","7030"]],authority["epsg","632	STRING
HIGH	autotest/gcore/vsigs.py	<?xml version="1.0" encoding="utf-8"?> <listallmybucketsresult> <buckets> <bucket> <name>mybucket</name> </bucket> </buc	STRING
HIGH	autotest/gcore/vsis3.py	<?xml version="1.0" encoding="utf-8"?> <listallmybucketsresult> <buckets> <bucket> <name>mybucket</name> </bucket> </buc	STRING
HIGH	autotest/gcore/vsioss.py	<?xml version="1.0" encoding="utf-8"?> <listallmybucketsresult> <buckets> <bucket> <name>mybucket</name> </bucket> </buc	STRING
HIGH	autotest/utilities/test_gdalalg_raster_contour.py	ncols 2 nrows 2 xllcorner 0 yllcorner 0 cellsize 1 4 15 25 36	STRING
HIGH	autotest/utilities/test_gdal_contour_lib.py	ncols 2 nrows 2 xllcorner 0 yllcorner 0 cellsize 1 4 15 25 36	STRING
HIGH	autotest/alg/contour.py	ncols 2 nrows 2 xllcorner 0 yllcorner 0 cellsize 1 4 15 25 36	STRING
HIGH	autotest/gdrivers/mrsid.py	projcs["nad27 / utm zone 11n", geogcs["nad27", datum["north_american_datum_1927", spheroid["clarke 1866",6378206.4,294.9	STRING
HIGH	autotest/gdrivers/jp2openjpeg.py	projcs["nad27 / utm zone 11n", geogcs["nad27", datum["north_american_datum_1927", spheroid["clarke 1866",6378206.4,294.9	STRING
HIGH	autotest/gdrivers/jp2grok.py	projcs["nad27 / utm zone 11n", geogcs["nad27", datum["north_american_datum_1927", spheroid["clarke 1866",6378206.4,294.9	STRING
HIGH	autotest/gdrivers/ecw.py	projcs["nad27 / utm zone 11n", geogcs["nad27", datum["north_american_datum_1927", spheroid["clarke 1866",6378206.4,294.9	STRING
HIGH	autotest/gdrivers/netcdf.py	projcs["nad27 / utm zone 11n", geogcs["nad27", datum["north_american_datum_1927", spheroid["clarke 1866",6378206.4,294.9	STRING
HIGH	autotest/gdrivers/jp2openjpeg.py	projcrs["africa_albers_equal_area_conic", basegeogcrs["wgs 84", datum["world geodetic system 1984", ellipsoid["wgs 84",6	STRING
HIGH	autotest/gdrivers/jp2kak.py	projcrs["africa_albers_equal_area_conic", basegeogcrs["wgs 84", datum["world geodetic system 1984", ellipsoid["wgs 84",6	STRING
HIGH	autotest/gdrivers/ecw.py	projcrs["africa_albers_equal_area_conic", basegeogcrs["wgs 84", datum["world geodetic system 1984", ellipsoid["wgs 84",6	STRING
HIGH	autotest/osr/osr_xml.py	projcrs["africa_albers_equal_area_conic", basegeogcrs["wgs 84", datum["world geodetic system 1984", ellipsoid["wgs 84",6	STRING
HIGH	autotest/gdrivers/isce.py	geogcs["wgs 84", datum["wgs_1984", spheroid["wgs 84",6378137,298.257223563, authority["epsg","7030"]], authority["epsg",	STRING
HIGH	autotest/gdrivers/ace2.py	geogcs["wgs 84", datum["wgs_1984", spheroid["wgs 84",6378137,298.257223563, authority["epsg","7030"]], authority["epsg",	STRING
HIGH	autotest/gdrivers/snodas.py	geogcs["wgs 84", datum["wgs_1984", spheroid["wgs 84",6378137,298.257223563, authority["epsg","7030"]], authority["epsg",	STRING
HIGH	autotest/gdrivers/roipac.py	geogcs["wgs 84", datum["wgs_1984", spheroid["wgs 84",6378137,298.257223563, authority["epsg","7030"]], authority["epsg",	STRING
HIGH	autotest/osr/osr_proj4.py	geogcs["wgs 84", datum["wgs_1984", spheroid["wgs 84",6378137,298.257223563, authority["epsg","7030"]], authority["epsg",	STRING
HIGH	autotest/osr/osr_micoordsys.py	projcs["unnamed",geogcs["nad27",\ datum["north_american_datum_1927",\ spheroid["clarke 1866",6378206.4,294.9786982139006	STRING
HIGH	autotest/osr/osr_usgs.py	projcs["unnamed",geogcs["nad27",\ datum["north_american_datum_1927",\ spheroid["clarke 1866",6378206.4,294.9786982139006	STRING
HIGH	autotest/osr/osr_pci.py	projcs["unnamed",geogcs["nad27",\ datum["north_american_datum_1927",\ spheroid["clarke 1866",6378206.4,294.9786982139006	STRING

AI Slop Vocabulary29 hits · 81 pts

Severity	File	Line	Snippet	Context
MEDIUM	ogr/ogrpgeogeometry.cpp	360	// that form a TIN. And be robust to consecutive duplicated triangles !	COMMENT
MEDIUM	ogr/ogrsf_frmts/pmtiles/ogrpmtilestileiterator.cpp	315	// do not allow this to be more robust against hostile files	COMMENT
MEDIUM	ogr/ogrsf_frmts/carto/ogrcartotablelayer.cpp	234	// by doing that here, we are somewhat robust to	COMMENT
MEDIUM	ogr/ogrsf_frmts/filegdb/FGdbUtils.cpp	483	// "Essentially, eliminate anything that is not alphanumeric or an	COMMENT
MEDIUM	…/ogrsf_frmts/openfilegdb/ogropenfilegdblayer_write.cpp	89	// "Essentially, eliminate anything that is not alphanumeric or an	COMMENT
MEDIUM	ogr/ogrsf_frmts/openfilegdb/filegdb_gdbtoogrfieldtype.h	23	// We could make this function far more robust by doing automatic coercion of	COMMENT
LOW⚡	swig/python/gdal-utils/osgeo_utils/gdalmove.py	96	# we just use the top left, top right, and bottom left to produce the	COMMENT
MEDIUM	…python/gdal-utils/osgeo_utils/samples/validate_s104.py	1027	# Cf Table 12-2 - Feature Type metadata, pertaining to the WaterLevel feature type	COMMENT
MEDIUM	…python/gdal-utils/osgeo_utils/samples/validate_s104.py	1331	# Cf Table 12-3 - Feature Instance metadata, pertaining to the feature instance	COMMENT
MEDIUM	…python/gdal-utils/osgeo_utils/samples/validate_s111.py	1068	# Cf Table 12-2 - Feature Type metadata, pertaining to the SurfaceCurrent feature type	COMMENT
MEDIUM	…python/gdal-utils/osgeo_utils/samples/validate_s111.py	1409	# Cf Table 12-3 - Feature Instance metadata, pertaining to the feature instance	COMMENT
LOW	…/gdal-utils/osgeo_utils/samples/validate_geoparquet.py	439	# For non-WKB encoding, just use the high level OGR API	COMMENT
MEDIUM	autotest/ogr/ogr_dxf.py	579	# changes are made to the aforementioned items. Ideally, one would test	COMMENT
MEDIUM	autotest/ogr/ogr_vdv.py	506	# Test we are robust against missing end;	STRING
MEDIUM	autotest/ogr/ogr_gml.py	3500	# Test we are robust to content of XML elements bigger than 2 GB	COMMENT
MEDIUM	autotest/gcore/tiff_read.py	2844	# Test that we are at least robust to wrong number of ExtraSamples and warn	COMMENT
MEDIUM	autotest/cpp/main_gtest.cpp	26	// Use a potentially non-C locale to make sure we are robust	COMMENT
MEDIUM	autotest/gdrivers/mbtiles.py	485	# Test we are robust to invalid bounds	COMMENT
LOW	autotest/gdrivers/jpeg_profile.py	128	# We will simply use the same profile multiple times.	COMMENT
MEDIUM	autotest/gdrivers/zarr_driver.py	8491	# round-trip, and multiscales metadata in one comprehensive test.	COMMENT
MEDIUM	gcore/gdalrasterband.cpp	7199	// to compute standard deviation in a more numerically robust way than	COMMENT
MEDIUM	gcore/multidim/gdalmultidim_array_gridded.cpp	254	// GCC 13.1 warns here. Definitely a false positive.	COMMENT
MEDIUM	third_party/flatbuffers/vector_downward.h	31	// Essentially, this supports 2 std::vectors in a single buffer.	COMMENT
MEDIUM	frmts/ngsgeoid/ngsgeoiddataset.cpp	267	// Test written that way to be robust to NaN values	COMMENT
MEDIUM	frmts/msg/msgdataset.cpp	771	// this is to utilize i to get iCol	COMMENT
MEDIUM	frmts/pcidsk/sdk/segment/cpcidskvectorsegment.h	89	// Essentially internal stuff.	COMMENT
MEDIUM	frmts/vrt/vrtsourcedrasterband.cpp	1666	// which is more numerically robust	COMMENT
MEDIUM	frmts/grib/degrib/g2clib/aecunpack.c	58	// Note: libaec doesn't seem to be very robust to invalid inputs...	COMMENT
MEDIUM	port/cpl_odbc.h	202	// Essentially internal.	COMMENT

Redundant / Tautological Comments34 hits · 49 pts

Severity	File	Line	Snippet	Context
LOW⚡	swig/python/gdal-utils/osgeo_utils/gdalmove.py	44	# Open the file.	COMMENT
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	2080	# Output the results	COMMENT
LOW	…python/gdal-utils/osgeo_utils/samples/validate_gpkg.py	715	# Check if we must set PRAGMA trusted_schema = ON	COMMENT
LOW	…/gdal-utils/osgeo_utils/samples/gdal_remove_towgs84.py	66	# Check if listgeo is recent enough	COMMENT
LOW	…sgeo_utils/samples/validate_cloud_optimized_geotiff.py	232	# Check if there is GDAL hidden structural metadata	COMMENT
LOW	autotest/gnm/gnm_test.py	61	# Open file base network	COMMENT
LOW	autotest/ogr/ogr_parquet.py	4474	# Write file using Parquet geo types	COMMENT
LOW	autotest/ogr/ogr_gpkg.py	4630	# Check if spatial index is recognized	COMMENT
LOW	autotest/ogr/ogr_vfk.py	44	# Open file, check number of layers, get first layer,	COMMENT
LOW	autotest/ogr/ogr_openfilegdb_write.py	3901	# Set SRS to None	COMMENT
LOW	autotest/ogr/ogr_openfilegdb_write.py	3923	# Set SRS to EPSG:4326	COMMENT
LOW	autotest/ogr/ogr_openfilegdb_write.py	3948	# Set SRS to EPSG:4269	COMMENT
LOW	autotest/ogr/ogr_csv.py	648	# Close the file and check again	COMMENT
LOW	autotest/ogr/ogr_mitab.py	97	# Close file.	COMMENT
LOW	autotest/ogr/ogr_mitab.py	284	# Check if the width and precision are as preserved.	COMMENT
LOW	autotest/ogr/ogr_pg.py	1210	# Check if the sub geometries of TIN and POLYHEDRALSURFACE are valid	COMMENT
LOW	autotest/ogr/ogr_pg.py	1256	# Check if the 3d geometries of TIN, Triangle and POLYHEDRALSURFACE are valid	COMMENT
LOW	autotest/ogr/ogr_pg.py	2465	# Check if the layer is listed	COMMENT
LOW	autotest/ogr/ogr_sql_sqlite.py	2137	# Check if MakeValid() is available	COMMENT
LOW	autotest/gcore/tiff_ovr.py	126	# Open file and verify some characteristics of the overviews.	COMMENT
LOW	autotest/utilities/test_gdal_rasterize.py	97	# Close file	COMMENT
LOW	autotest/utilities/test_gdalalg_raster_sieve.py	66	# Check if the output is TILED	COMMENT
LOW	autotest/gdrivers/nitf.py	1666	# Check if JPEG driver supports 12bit JPEG reading/writing	COMMENT
LOW	autotest/gdrivers/nitf.py	1684	# Check if JPEG driver supports 12bit JPEG reading/writing	COMMENT
LOW	autotest/gdrivers/nitf.py	1708	# Check if JPEG driver supports 12bit JPEG reading/writing	COMMENT
LOW	autotest/gdrivers/nitf.py	6516	# Check if JPEG driver supports 12bit JPEG reading/writing	STRING
LOW	autotest/gdrivers/jpeg.py	359	# Check if JPEG driver supports 12bit JPEG reading/writing	COMMENT
LOW	autotest/gdrivers/jpeg.py	382	# Check if JPEG driver supports 12bit JPEG reading/writing	COMMENT
LOW	autotest/gdrivers/jpeg.py	451	# Check if JPEG driver supports 12bit JPEG reading/writing	COMMENT
LOW	autotest/gdrivers/ogcapi.py	31	# Set RECORD to TRUE to recreate test data from the https://maps.gnosis.earth/ogcapi server	COMMENT
LOW	.github/workflows/asan/test.sh	74	# Check if the tests failed and error out.	COMMENT
LOW	frmts/pcraster/doxygen.cfg	272	# Set it to YES to include the internal documentation.	COMMENT
LOW	doc/source/conf.py	119	# Read the file of substitutions and append it to the beginning of each file.	COMMENT
LOW	doc/source/_extensions/doctestplus_gdal.py	23	# Check if there is any valid argument, and skip it. Currently only	COMMENT

Unused Imports39 hits · 36 pts

Severity	File	Line	Context
LOW	swig/python/osgeo/gdalnumeric.py	1	CODE
LOW	swig/python/osgeo/gdalnumeric.py	2	CODE
LOW	swig/python/gdal-utils/scripts/gdal_pansharpen.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal_proximity.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal_merge.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal_retile.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal_polygonize.py	8	CODE
LOW	swig/python/gdal-utils/scripts/ogr_layer_algebra.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal_calc.py	8	CODE
LOW	swig/python/gdal-utils/scripts/pct2rgb.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal2xyz.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal_sieve.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal_fillnodata.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdalmove.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal_edit.py	8	CODE
LOW	swig/python/gdal-utils/scripts/ogrmerge.py	8	CODE
LOW	swig/python/gdal-utils/scripts/rgb2pct.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdal2tiles.py	11	CODE
LOW	swig/python/gdal-utils/scripts/gdalcompare.py	8	CODE
LOW	swig/python/gdal-utils/scripts/gdalattachpct.py	8	CODE
LOW	autotest/conftest.py	22	CODE
LOW	autotest/conftest.py	27	CODE
LOW	autotest/conftest.py	27	CODE
LOW	autotest/conftest.py	27	CODE
LOW	autotest/conftest.py	27	CODE
LOW	autotest/conftest.py	27	CODE
LOW	autotest/ogr/ogr_geojson.py	4695	CODE
LOW	autotest/ogr/ogr_geojson.py	4741	CODE
LOW	autotest/ogr/ogr_geojson.py	4787	CODE
LOW	autotest/pyscripts/test_gdal2tiles.py	75	CODE
LOW	autotest/pyscripts/test_gdal2tiles.py	76	CODE
LOW	autotest/pyscripts/test_gdal2tiles.py	78	CODE
LOW	autotest/gcore/test_gdal_fsspec.py	21	CODE
LOW	autotest/gcore/gdal_stats.py	1518	CODE
LOW	autotest/gcore/multidim.py	1673	CODE
LOW	autotest/utilities/test_gdalalg_raster_zonal_stats.py	156	CODE
LOW	…source/_extensions/sphinxcontrib_programoutput_gdal.py	39	CODE
LOW	…source/_extensions/sphinxcontrib_programoutput_gdal.py	39	CODE
LOW	…source/_extensions/sphinxcontrib_programoutput_gdal.py	39	CODE

AI Structural Patterns29 hits · 27 pts

Severity	File	Line	Context
LOW	swig/python/gdal-utils/osgeo_utils/gdal_pansharpen.py	148	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_proximity.py	148	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_polygonize.py	27	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_calc.py	98	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal2xyz.py	39	CODE
LOW	swig/python/gdal-utils/osgeo_utils/gdal_fillnodata.py	35	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	500	CODE
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	841	CODE
LOW	…hon/gdal-utils/osgeo_utils/samples/gdallocationinfo.py	66	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	101	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	107	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	113	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	119	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	125	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	131	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	137	CODE
LOW	…g/python/gdal-utils/osgeo_utils/auxiliary/rectangle.py	148	CODE
LOW	…on/gdal-utils/osgeo_utils/auxiliary/raster_creation.py	31	CODE
LOW	autotest/ogr/ogr_mitab.py	1483	CODE
LOW	autotest/pyscripts/test_gdal_calc.py	590	CODE
LOW	autotest/pyscripts/test_gdal_calc.py	622	CODE
LOW	autotest/pymod/webserver.py	42	CODE
LOW	autotest/pymod/webserver.py	296	CODE
LOW	autotest/pymod/webserver.py	350	CODE
LOW	autotest/pymod/gdaltest.py	80	CODE
LOW	autotest/pymod/gdaltest.py	134	CODE
LOW	autotest/pymod/gdaltest.py	373	CODE
LOW	…otest/utilities/test_gdalalg_raster_shift_longitude.py	30	CODE
LOW	autotest/gdrivers/vrtderived.py	935	CODE

Slop Phrases12 hits · 26 pts

Severity	File	Line	Snippet	Context
LOW	ogr/ogrsf_frmts/geojson/libjson/json_object.h	418	* ownership through json_object_get (& don't forget to do a json_object_put	COMMENT
LOW	ogr/ogrsf_frmts/osm/data/osmconf.ini	77	# Note for GDAL developers: if we change the below formula, make sure to edit ogrosmlayer.cpp since it has a hardcoded o	COMMENT
LOW	swig/python/gdal-utils/osgeo_utils/ogrmerge.py	183	# WARNING: if adding a new option, make sure to update _gpkg_ogrmerge()	COMMENT
LOW	third_party/LercLib/BitStuffer2.cpp	34	// if you change Encode(...) / Decode(...), don't forget to update ComputeNumBytesNeeded(...)	COMMENT
LOW	third_party/LercLib/BitStuffer2.cpp	157	// if you change Encode(...) / Decode(...), don't forget to update ComputeNumBytesNeeded(...)	COMMENT
MEDIUM	.github/workflows/linux_build.yml	525	# you can replace JXL_TREEISH=main by JXL_TREEISH=sha1_of_known_working_commit	COMMENT
MEDIUM⚡	frmts/pcraster/doxygen.cfg	428	# If the value of the INPUT tag contains directories, you can use the	COMMENT
MEDIUM	frmts/pcraster/doxygen.cfg	454	# If the value of the INPUT tag contains directories, you can use the	COMMENT
MEDIUM	frmts/pcraster/doxygen.cfg	466	# If the value of the EXAMPLE_PATH tag contains directories, you can use the	COMMENT
LOW	frmts/pcraster/libcsf/putattr.c	33	* string field. Don't forget to pad a	COMMENT
LOW	frmts/pcraster/libcsf/putattr.c	74	* string field. Don't forget to pad a	COMMENT
LOW	frmts/mrf/LERCV1/Lerc1Image.cpp	345	// if you change the file format, don't forget to update not only write and	COMMENT

Verbosity Indicators10 hits · 19 pts

Severity	File	Line	Snippet	Context
LOW	ogr/ogrsf_frmts/geojson/libjson/arraylist.c	193	// Because put_idx can skip entries, we need to check if	COMMENT
LOW⚡	gcore/sse2neon.h	5552	// Step 1: Extract MSB of each byte (vshr #7: 0x80->1, 0x7F->0)	COMMENT
LOW⚡	gcore/sse2neon.h	5555	// Step 2: Shift each byte left by its bit position (0-7 per half)	COMMENT
LOW⚡	gcore/sse2neon.h	5571	// Step 3: Sum each half -> bits [7:0] and [15:8]	COMMENT
LOW⚡	gcore/sse2neon.h	5577	// Step 1: Extract MSB of each byte	COMMENT
LOW⚡	gcore/sse2neon.h	5581	// Step 2: Parallel bit collection via shift-right-accumulate	COMMENT
LOW	gcore/sse2neon.h	5599	// Step 3: Extract packed result from byte 0 of each half	COMMENT
LOW	frmts/ceos2/ceosrecipe.c	543	/* First, we need to check if the "SAR Data Format Type */	COMMENT
LOW	frmts/ceos2/ceosrecipe.c	610	/* First, we need to check if the "SAR Data Format Type */	COMMENT
LOW	frmts/map/mapdataset.cpp	275	/* First, we need to check if it is necessary to define a neatline */	COMMENT

Structural Annotation Overuse6 hits · 13 pts

Severity	File	Line	Snippet	Context
LOW⚡	gcore/sse2neon.h	5552	// Step 1: Extract MSB of each byte (vshr #7: 0x80->1, 0x7F->0)	COMMENT
LOW⚡	gcore/sse2neon.h	5555	// Step 2: Shift each byte left by its bit position (0-7 per half)	COMMENT
LOW⚡	gcore/sse2neon.h	5571	// Step 3: Sum each half -> bits [7:0] and [15:8]	COMMENT
LOW⚡	gcore/sse2neon.h	5577	// Step 1: Extract MSB of each byte	COMMENT
LOW⚡	gcore/sse2neon.h	5581	// Step 2: Parallel bit collection via shift-right-accumulate	COMMENT
LOW	gcore/sse2neon.h	5599	// Step 3: Extract packed result from byte 0 of each half	COMMENT

Fake / Example Data7 hits · 6 pts

Severity	File	Line	Snippet	Context
LOW	autotest/ogr/ogr_elasticsearch.py	3090	"key": "dummy_key",	CODE
LOW	autotest/ogr/ogr_elasticsearch.py	3126	assert f["key"] == "dummy_key"	CODE
LOW	autotest/ogr/ogr_elasticsearch.py	3190	"key": "dummy_key",	CODE
LOW	autotest/ogr/ogr_elasticsearch.py	3222	assert f["key"] == "dummy_key"	CODE
LOW	autotest/gcore/data/text.txt	1	Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliq	CODE
LOW	autotest/gcore/data/text.txt	1	Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliq	CODE
LOW	doc/source/_extensions/cli_example.py	36	nodes.Text("placeholder"),	CODE

Docstring Block Structure1 hit · 5 pts

Severity	File	Line	Snippet	Context
HIGH	…sgeo_utils/samples/validate_cloud_optimized_geotiff.py	171	Check if a file is a (Geo)TIFF with cloud optimized compatible structure. Args: ds: GDAL Dataset for the file	STRING

TODO Padding3 hits · 4 pts

Severity	File	Line	Snippet	Context
LOW	autotest/ogr/ogr_gml.py	304	# TODO: Add test for other data types as they are added to the driver.	COMMENT
LOW	third_party/flatbuffers/flexbuffers.h	127	// TODO: implement proper support for 8/16bit floats, or decide not to	COMMENT
LOW	frmts/netcdf/netcdfdataset.cpp	12203	// TODO: implement support of relative paths.	COMMENT

Modern Structural Boilerplate1 hit · 1 pts

Severity	File	Line	Snippet	Context
LOW	swig/python/gdal-utils/osgeo_utils/gdal2tiles.py	703	def set_cache_max(cache_in_bytes: int) -> None:	CODE

OSGeo/gdal

Open-Source Code Quality, Security and Technical Debt Review